Lync 2013- HTML pasted in Lync 2010 client not showing

After the last round of Office 2013 updates I get blanks whenever one of my Lync 2010 coworkers pastes a number from a web page into their 2010 client window. I am using Lync 2013 v 15.0.4517.1005 32 bit. Thank you

I have the issue mentioned in this post where I can't view html content that another person pastes into a message they send me and also can't paste content from certain web pages into Lync directly and have to paste to a text editor and copy it there before
pasting into lync.
I noticed that if someone sends me content pasted from a web browser that I may see an empty box on my end rather than the content though in the history when viewing the conversation in outlook I see the actual text there.
For the issue with pasting, I found that the following html page when opened in Firefox 23.0.1 will reproduce the issue:
---------------- html page markup -------------------------------------
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd">
<html class="htmlStyle" xmlns="http://www.w3.org/1999/xhtml">
<head><title>Some Title</title></head>
<body>
    <form>
        <div>
            <div>
                <div>
                    <table>
                        <tbody>
                            <tr>
                                <td>
                                    <div>
                                        <div >
<div >
<div>
<div>
<div>
<div>
<div>
<table>
<tbody>
<tr>
<td>
<table>
<tbody>
<tr>
<td>
<div>
<p>
<!--StartFragment-->
Text to copy
<!--EndFragment-->
</p>
</div>
</td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
</div>
</div>
</div>
                                        </div>
                                    </div>
                                </td>
                            </tr>
                        </tbody>
                    </table>
                </div>
            </div>
        </div>
    </form>
</body>
</html>
Steps to reproduce:
Open the attached html file in Firefox
Press CTRL + A to select all
Press CTRL + C to copy
Past into a message window
Results:
Nothing will be visible when pasting.
Expected Results:
"Text to copy" should be pasted into the message window.
This is reproduced using Microsoft Lync 2013 version 15.0.4517.1504 on Windows 8.
Note that this page doesn't reproduce the issue when following these steps in Internet Explorer 10 though I have seen the behavior when copying from an internal web application.
Alan

Similar Messages

  • Is Lync 2013 perfectly compatible with Office 2010?

    Microsoft Office 2010 and Lync 2013 are two diferrent instances, but they use some common elements.
    In our company we have over a hundred MS Office 2010 licences and we dont need/afford to change them all to 2013. Now we want to install Lync 2013 and I wonder if there could be compatibility issues or, if Lync 2013 can modifiy the common files they use,
    so that certain functions in Office 2010 will not be available or not work properly.
    Is there a risk of this happening or they can work together "in complete harmony"? This is very important to me and I cannot afford to make a mistake. I would appreciate any help. Thank you.

    Hi Cristi,
    Checkout these Lyncs on compatibility and interoperability:
    Lync 2013 Compatibility http://technet.microsoft.com/en-us/library/gg412817.aspx
    Client Interoperability http://technet.microsoft.com/en-us/library/jj204672.aspx
    As far as having Lync 2013 & Office 2010 on the same PC, largely it SHOULD be ok and I've not had many issues. The exception to this was on a recent Citrix deployment, where for some reason running Lync 2013 was causing the Office 2010 instance to rerun
    everytime it was started. All desktops were ok though.
    My suggestion is to make sure you thoroughly test with every scenario that you can think of before rolling out to the masses.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Connecting a SharePoint 2013 Document Library to Outlook 2010 client

    Good Day,
    Can someone please confirm if you can connect a SharePoint 2013 Document Library to Outlook 2010 client?
    I have seen articles, like the one shown below for Outlook 2013 to SharePoint 2013;
    http://www.sharepointgeoff.com/how-to-connect-a-sharepoint-2013-document-library-to-outlook-2013/
    Please provide a link to documentation to validate what Outlook Office versions will support viewing Document Library from Outlook client from a SharePoint 2013 Document Library.
    Thanks in advance for taking the time to review my request.
    Regards,
    Mark

    Hi Mark,
    Per my understanding, you might want to connect SharePoint 2013 Document Library to Outlook 2010 client application.
    Yes, SharePoint 2013 Document Library can connect to Outlook 2010 client application, the connecting process is similar as what SharePoint 2013 connect to Outlook
    2013 client application does.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Exchange 2010 calendar not showing on outlook 11 Mac

    Exchange 2010 calendar not showing on Outlook 11 Mac on my iMac. It shows fine on iPhone and OWA. 

    Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
    Regards.

  • Outlook 2010 contacts not showing phone number in Lync 2013 client

    Hi,
    We have Lync 2013 with Exchange 2010. Recently we started upgrading Lync clients from 2010 to 2013.
    A few users started reporting that their local Outlook contacts does not show phone numbers in Lync 2013 (working with 2010)
    I have installed the august patch which should solve this issue
    981751 - Lync 2013 does not display telephone number of an Outlook 2010 contact in the contact card
    Any idea where to look next?

    Hi Tobias Borgen Nielsen,
    Lync expects all the phone numbers to be in the E.164 format, meaning they should be +1-111-11111111 etc. If they’re not like this, you will have to normalize them if you want Lync
    to publish them.
    The related article for your reference.
    Lync not populating contact cards phone numbers from Active Directory (Or: How to normalize AD phone numbers for Lync Server 2010 and 2013)
    http://y0av.me/2012/02/23/normalize_ad_numbers/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or
    suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Hope it can be helpful.
    Best regards,
    Eric

  • Lync 2013 IM from full Lync client to Apple Iphone 4S

    Hi,
    We are running Lync 2013 and Lync 2010 in coexistence. When sending an IM from a fully Lync client (Lync 2013 homed user) to an Apple Iphone 4S with the latest Lync 2013 mobile app installed and the user chooses not to read the notification or misses it
    an error is shown on the senders Lync window - is this by design or an error?
    This message may not have been sent to Lyncuser1 because the   server timed out.
     On the server monitoring reports the following events are logged for client and server:
    24116; Component="RTCC/5.0.0.0_UCWA/5.0.0.0 iPadLync/5.4.1485.0000 (iPad iPhone
    OS 7.0.3)"; Reason="The request was rejected because the application did not
    respond to the incoming call and it was not the preferred endpoint."; 
    1
    13004
     FEservbeer.domain.com.net
    InboundRouting
    13004; reason="Request was
    proxied to one or more registered endpoints"; source="FEserver.domain.com";
    Count="2"; appName="InboundRouting"
    Please advise f this is something we should be concerned about as the message does get received by the iphone user but the sender gets a message that indicates it may not have reached the iphone user.
    Cheers
    D

    Hi,
    Did the issue happen both clients internal the company or external the company?
    Please check if the both of the tested users could see the presence of each other normally.
    Please try to log off Lync Mobile client and then log back on again to test the issue again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Is it possible to disable 'Lync 2013' options inside of Outlook 2010? If so, how?

    I would like to disable/eliminate everything Lync 2013 related inside of my Outlook 2010.  I want to disassociate all its relations with Outlook, but keep it everywhere else.  
    More specifically, in Outlook, I'd like to keep the original (pre-Lync) option of knowing where persons are (i.e. 'Free', 'Busy until 4:00pm', etc). This option is shown when you open a new email, add a recipient, and hover over their name. It would
    normally say things like 'Busy until 4:00pm' or 'Free'. Now it just says their Lync location (ex. 'Presence Unknown' since most of the company does not have Lync), and I need it to go back to the original setting.
    I also dislike the 'Frequent Contacts' option, so if that could go away, that'd be great. 
    Things I've already tried so far:
    In Outlook: Disabling the Outlook Lync Add-in 'Lync Meeting Add-in'
    In Lync:
    Personal/Personal Information Manager - Changing drop-down to NONE (from Microsoft Exchange or Microsoft Outlook)
    Personal/Location - Unchecking 'Share my location info with other programs I use'
    Contacts List - Unchecking 'Contact Status'
    Any help is appreciated. Thank you!

    Hi Kara526,
    Outlook reads the following registry key in order to display presence information within Outlook.
    HKEY_CURRENT_USER\Software\IM Providers
    REG_SZ: DefaultIMApp
    The default value is “Lync”, please delete
    “Lync” and restart outlook.
    Best regards,
    Eric

  • OCS to Lync 2013, move all users over before client deployed?

    Hello, quick question hoping someone can answer...
    We've deployed Lync 2013 and are migrating about 2000 users from OCS across many branch offices, going branch-by-branch.
    Is there any downside to moving ALL 2000 users over to the Lync pool before they have the Lync client deployed to their site? They would still be using Communicator until their site receives the Lync install. I know Communicator works when connecting to
    the Lync pool so I'm guessing this should be OK.
    The problem we're seeing during this transition phase is when an employee travels to a site that's had Lync client deployed but the employee is still on the Communicator pool because their primary site hasn't been upgraded yet, and are thus unable to sign-in
    to Lync.

    I would agree with Anthony, 
    The basic features works with the Communicator clients but when it comes to conferencing users will face a lot of problems, also  a problem as been identified during such scenario is when users homed on the lync pool and signing in using the OC client
    experience a weird behavior when their contact lists disappear, then it appears again when logging using a lync client. 
    as a resume.
    If you are obliged to use the OC client please make sure that it is patched with the latest updated released. 
    as a best practice move to Lync client as soon as possible.
    Regards,
    Charbel Hanna
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Lync 2013 Cumulative updates with coexistence 2010

    Hello 
    I am pretty new lync admin, i have successfully done a coexistence with 2010 and 2013
    I just need clarification on the steps for a 2013 standard edition cu updates. 
    From the site http://support.microsoft.com/kb/2809243  I am seeing that I need to 
    1) run LyncServerUpdateInstaller.exe
    2)run Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn SE.FQDN -Verbose
    3) Do not run Install-CsDatabase -CentralManagementDatabase until after full 2013 migration 
    4) Enable the Mobility service, run the following cmdlet:
    Enable-CsTopology
    5) Run %ProgramFiles%\Microsoft Lync Server 2013\Deployment\Bootstrapper.exe
    Just need those steps confirmed and..
    1) Just to confirm that I dont need to worry about output of Get-CsPoolUpgradeReadinessState command
    2) We dont have Mobility service, do I still need to run Enable-CsTopolgy for Standard edition?
    Thanks !

    Thank Iain 
    Just to confirm it is lync 2013 CU updates I am trying to perform on standard pool 
    When i run the CsPoolUpgradeReadinessState 
    I get State:insufficientActiveFrontEnds and IsReadForUpgrade True
    According to the update notes, they only speak of running cspoolupgradereadiness on Enterprise edition pool. 
    So i just wanted to know if the output of cspoolupgradereadinessState can be ignored or concerned about for the updates. 

  • Lync 2013 Cumulative Update and Lync 2010 CM database ??

    I was going through the update process for our new Lync 2013 Enterprise install,  I just have a FE server up at this point.  I ran the LyncServerUpdateInstaller and it ran fine.  I then ran through the Backend SQL updates, and of course I
    get to the end and read...
    Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
    Install-CsDatabase -CentralManagementDatabase cmdlet. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
    Install-CsDatabase -CentralManagementDatabase cmdlet to apply the changes.
    And yes we have a Lync 2010 Standard server running and the CM DB is on the Lync 2010 pool.   I haven't noticed any problems yet, Do I need to be concerned about this?  And if so how do I fix it?  I only have a test account on the Lync
    2013 server at this point.  So I could uninstall if needed.
    Thanks,
    Matt

    Hi,
    As I know, it better to move the Central Management Store from Lync server 2013 database back to Lync server 2010 database firstly. Then if needed, you can uninstall the Lync server 2013 database.
    You can refer to the link below:
    http://cmcgreanor.wordpress.com/2012/07/24/move-lync-central-management-store-and-front-end-servers-to-a-new-lync-pool-with-a-new-sql-backend/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Lync 2013 and Office 365 - Desktop Client not showing contact pictures but online and mobile does.

    Hello
    I have gone so far of opening a support call with Microsoft but they don't know how to fix the problem also so I was wondering if anybody has a fix for me.
    We have only about 25 users using Office 365 Mid Size Business - We don't have the AD Intergrated yet - that will be at a later date. So I am not doing any of this thumb photos in AD which I have read about.
    So about 15-16 of the machines work fine, We have the Desktop Office 2013 installed , and in Lync everybody can see everybody's contact photo.
    We have the rest which works perfect apart from showing the contact photo's - All settings are the same - When these users use the Online Web Lync or iPAD Lync, all photos are displayed....it is just on the desktop.
    Like I said Microsoft spent an hour on a workstation and don't know what the fix is - we did all the deletion of the SIP Dir in the c:\users\username\appdata\microsoft\office\15.0\lync - For me , I don't see this as a game changer since all aspects of Lync
    work for IM, Conference, Presentation - however I am guessing some of my users want to stare at pictures all day :-)
    I would like to know am I the only person getting this?

    Hi Andy,
    Have you viewed this KB article:
    User contact photos in Lync aren't displayed correctly
    http://support.microsoft.com/kb/2497721
    Kent Huang
    TechNet Community Support

  • Lync 2013 with ipad clinet (lync 2013)

    Hi All
    I have deployed lync 2013 and installed only the JAN -14 updates over it, my setup is in split brain dns (same name internal & external) and I have added all lync discovery A record to point to the internal IP.my problem is ipad client 2010 is working
    fine however ipad client 2013 is not able to connect at all, what I am missing here?
    PS: I am using public certificate for the internal servers & Lync connectivity analer go green on every thing when I chose Lync Mobile 2013
    please help

    Do you have server autodetect turned on in both client versions?  Are you signing into both version from the same type of network location (ie. internal WiFi).  Does it work if you switch to a different WiFi location that would be external?
    Also, you said before "I have added all lync discovery A record to point to the internal IP."
    If you have lyncdiscover.<yourdomain> pointing to internal, but mobilty set to external, it won't work.  Set lyncdiscover in your internal DNS zone to your external reverse proxy IP.

  • LYNC 2013 generating Full Address book files but not the delta ones

    Dear Experts,
    I have noticed after I installed a new LYNC 2013 pool that the SQL share for address book is only showing F-xxxx for full downloads of address book but I am not seeing the D-xxx delta files which is causing my client not to receive the GALContactDelta file.
    This new pool is an enterprise LYNC 2013 and I am currently testing to move from LYNC 2010. I have only one Address Book configuration policy and I did not create any new policy for the new pool/site. Any suggestions where to check the cause is appreciated.
    Regards,
    A. Zaher
    A. Zaher

    Hi,
    If the address book contains over 50K entries, the client maintains a separate delta database GalContactsDelta.db and index GalContactsDelta.db.idx for GAL contacts, and periodically merges
    updates into its main database GalContacts.db.
    http://technet.microsoft.com/en-us/library/ee323492(v=office.13).aspx
    Thanks,
    Simon Wu
    TechNet Community Support

  • Lync 2013 On Premises to Lync Online, one way presence and IM

    I am attempting to federate my on premise domain with a domain hosted on Office 365.
    At the moment, the O365 users can add and see presence of the on-premise users, and can send IM messages as well. But not vice versa.
    I've scoured the internet for any answers, but have not found anything that has helped my situation. 
    So far I've verified:
    1. The domain has been added to both sides allowed domains sections and the LyncOnline has been enabled in SIP federated providers
    2. The on prem Edge server can resolve the 0365 Edge address
    3. The external certificate is from a trusted source, with all SAN's configured.
    4. All correct ports are open on the firewall inbound, and I can access sipfed.online.lync.com 5061 from the Edge server via telnet
    5. The remote connectivity analyser connects with no errors to my edge server on prem
    6. External users can connect to Lync On Prem
    7. Exchange Online interoperability is working. I.e I can set my presence via OWA, and the Lync 2013 client updates instantly
    Could there be anything I have missed? Before deploying this Lync on prem, I had a complete test lab environment working and Federation was working without issue.
    Any help greatly appreciated.

    Edge server configuration is the most likely cause 
    what happens if repeat the test for Remote onprem user does this work?
    What is access edge port set to on the edge server?
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

  • Lync 2013 desktop usesr and Lync Web users.

    When i send IM to users within my group using  Lync 2013 desktop client, the recipients on Lync Web app does not get my font color or font syle. Is there settings to get the font color and font style I use on the desktop client to appear in the Lync
    web app users windows as I send it over.

    Hi,
    I test in my Lync environment but didn’t find the issue. As Anthony said, there is no set except the setting “Change Font…” on Lync client Options. You can try to download the latest version for Lync client from Microsoft Website
    and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for

  • Why i can't open freehand files in Windows which are created in Mac??

    As i use Mac to operate freehand in my company. But when i open those files at home by using Windows freehand, i can't open them? Why?? Please help..thanks!

  • Mounting drives

    Fairly generic Linux question but does my non-root user have to belong to any specific groups to be able to mount the disk drive and usb drives? Whenever I try to access one as my non-root user I get a "Not Authorized" message box (in GNOME).

  • Select Options in Web dynpro

    Hi, I have a report, this has select options for users to enter the selection criteria. On the screen users can see 'Cancel', 'Check', 'Reset' and 'Copy' buttons but NO 'SAVE'!!! Is there a way to save the selection made by the user as a variant? by

  • Depriciation for asset with limit on maximum value

    Hello, We have a requirement in which we have a limit on maximum value of the asset on which depreciation is allowed. For example is asset value is more than 100000 then depreciation should be allowed only for value 100000 and the depreciation should

  • Accessing the preference path in a dynamic page

    All, I would like to access the preference path so that I can use the get_names and get_value functions, in a dynamic page. When we create the dynamic page, we don't know what the preference path is. so, how do I get the preference path? e.g Add the