Lync + Exchange on Same Server?

I'm attempting to build a test infrastructure Active Directory + Lync + Exchange. After installing Lync on my Exchange Server,
I was unable to connect to Exchange. I don't know for sure that I was able to connect to Exchange before I installed Lync though. Rather than go through the installation process again, I'm hoping if someone can tell me for sure if Lync 2010 and Exchange 2010
can exist on the same server.

I'm fairly sure from previous discussions with our infrastructure guys that this is a big no-no (I thought about doing the same), although can't find any evidence to back up this assertion!
This ServerFault
question might help you with a possible workaround - its for OCS 2007 R2, but may apply to Lync too
You might get a better response asking this specific question on serverfault, given that it's more infrastrucure than dev related

Similar Messages

Server 2008R2 and Exchange on Same server

Hello Everyone,
I have taken over the IT Department for a small County Government and have found that the prior contractor installed Exchange 2010 on the same server that is running Active Directory. This machine is also acting as the DC. I would really appreciate any help
in figuring out which one will be easier to move. I am planning on ordering a new server but it will have Server 2012 on it. I am looking for any help and instructions of which one would be the best to move and what is the best way to accomplish this.
Thanks in advance.

Hello,
once a DC has Exchange installed demoting this DC is NOT SUPPORTED operation!!!
First you MUST move Exchange to another machine. Therefore ask the Exchange experts in the already mentioned forum.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Exchange 2013 Windows Server 2012 NLB and DAG on the same server

Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

Lync 2013 and SQL 2012 on the same server

Hi,
I'm in the process of migrating Lync 2010 to Lync 2013. I have a clean install of Windows Server 2012 R2. Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
Thanks
P

Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg425848.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Lync 2013 Error Edge and RP on the same server

Hello everybody
We have the following issue:
In one Lync hybrid deployment with O365, the Edge and RP roles have been deployed on the same server.
The Edge services are configured to use different ports than 443, the Edge service is working fine, however; the issue is that the RP is not working at all. The most critical feature is the access to mobility services and that all O365 users view the local
users with presence unknown.
The server is configured with two nics, one to the internal network and the other one has configured two diferente IP addresses, each is one published thorught NAT to specific Public IP addresses for Edge and RP.
So far we identified that the Ip address that belongs to Edge services, is always listening on port 443, even when the service is stopped.
Any experience or idea is welcome!
Thanks in advance.
Regards.
Regards. Cristian V.

Someone got it working (not recommended): http://social.technet.microsoft.com/Forums/lync/en-US/8963a687-8125-4843-8a9a-2d1ee0c819df/iis-arr-reverse-proxy-on-edge-server-supported-i-dont-think-so?forum=lyncdeploy
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Lync 2013 Edge and Reverse proxy on same server with SNI

Hello
I cannot find information if it is possible to create a single Lync 2013 Edge server with a Reverse proxy on the same server?
Would it not be possible to share port 443 with SNI support? That way we could use only one public IP?
Thanks!

Sorry, it doesn't work. Remember that 443 isn't HTTPS for the Edge. If you went with the single IP model for the edge, 443 would be used for the A/V role which would be STUN/TURN.
The edge will always want to listen on 443, it just doesn't work to collocate a reverse proxy.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Oracle alert not working in 11i but working on R12 on same server

Hi Friends,
I have an R12(R12.1.1) Instance and I configured Oracle Alert with the following details
Mail systems : Windows NT Mail
Mail Database/Server Name: server1
Send Mail Account/password : wf/wf
Response Mail Account/password: wf/wf
Enable Response Processing:no
Workflow mailer is working and I tested a sample Oracle Alert and it works fine.I received mail also.
I also have a 11i (11.5.10.2) instance on the same server and i configured the alert options exactly as i did for R12 and the workflow mailer is also running but the alert is throwing error:
APP-ALR-04124: Oracle Alert was unable to deliver your message
To <mail id>
Apps Version : 11.5.10.2(Default Installation,No patches applied)
Server OS : Red Hat Linux ES 4.4
Mail server : Exchange 5.5 on windows
Both the instances are on the same server.
what is the change needs to be done on 11i compared with R12(R12.1.1)which is working fine.
Please let me know.
Regards,
DB

Pl run the 11i Diagnostics Test outlined in MOS Doc 271367.1 (11i : Oracle Alert Alert Check Setup Test)
HTH
Srini

Pocessing message on same server in HA

Hi.
I set up the PI hA environment as Note 1052984.
After this configuration,
Sender adapter(running server A) send to integration Engine "running on serverA" or "running on server B".
And the integration Engine(running server A) send to receiver adapter "running on server A" or "running on server B".
We want message processing on same server.
Sender Apdater(server A)->IE(server A)->receiver adapter(server A)
Sender Apdater(server B)->IE(server B)->receiver adapter(server B)
How can I do this?
regards,

Hi Michal,
Thanks for yor reply. I can see two server nodes in RWB - adapter engine - engine status, but still can't see the second node in component monitoring overview and performance monitoring.
I changed some parameters in exchange profile accroding to that Note, and found some parameters are not set to message server name, which is listed as below:
com.sap.aii.rwb.server.centralmonitoring.r3.ashost
com.sap.aii.ib.server.connect.webas.r3.ashost
com.sap.aii.connect.integrationserver.sld.name
It seems the last parameter must be set to host name of central app server, so I set it to the first application server:is.00.***xida01.
Regarding the first two parameters, either first server or null value will not make the second server exist in component monitoing.

Co-Locate Client Access and Edge Transport Role on Same Server?

Co-Locate Client Access and Edge Transport Role on Same Server?
Is it possible/supported to install the Edge Transport Server Role on the same machine that the Client Access role is installed on now that 2013 SP1 has added support back in for the Edge Transport Role?
jon

No.
Unless something has radically changed from before...
EDIT
No, nothing has changed:
"If you want to install the Exchange 2013 Mailbox or Client Access roles on a computer, see
Install Exchange 2013 Using the Setup Wizard. The Edge Transport role can't be installed on the same computer as the Mailbox or Client Access server roles."
http://technet.microsoft.com/en-us/library/dn635117(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Unity - Changing the exchange to another server

Hi guys,
Lets say I have Unity 4.2 set up with exchange on another box. Then the whole exchange server went down without any backups.
My questions is can we install exchange on the same server as Unity?
and then move it to another server(once the server is back)

Unity has an emergency backup mode called UMR and in case the Exchange server goes down it stores the messages locally but is NOT a replacement for exchange and that works only after unity has been properly set with exchange.

Can't connect to Exchange 2007 SP2 server

When I try and set up a new Exchange account to our internal Exchange 2007 server I get the following error message:
"The Exchange Server '<server name>' doesn't have the minimum required version installed. To use Mail with Exchange, the server must be running Update Rollup 4 for Exchange Server 2007 Service Pack 1 or later. Contact your server administrator.'
in spite of Service Pack 2 being installed on the server.
Exchange Web Services are running as expected at the URL '/EWS/Exchange.asmx'.
If anyone has suggestion on how to diagnose the exact problem I would very much appreciate the assistance.
N.

Hello,
I don't have any ideas yet but can chime in with "me too".
A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

Moving Exchange from old server to completely new server

Hello All,
I hope to get some good pointers here. I currently have Exchange server 2007 SP1 running today. The server is old and the warranty just expired. I have been given permission to buy a new server and migrate to it. I have the new server
up and running with Exchange 07 SP1 installed. I am looking for the best way to migrate and move users from one server, to the new one and decommission the old one. The storage is Are there any special steps I need to take? Do
I need to do any ADPrep to tell AD to use the new server? I've tried looking for a guide or a how-to but all I have found are vague and brief ways to install Exchange server, but not to migrate from one server to a new one. These are two separate
physical servers btw.
edit - I forgot to mention that the exchange store is on a SAN via iSCSI
Thank you,
David

David,
Moving exchange in ten easy steps:
1.Bring up a new server as a new server in the same site. Use a different name for the new server. If you need to move Exchange to another server with the same name, follow the instructions in the Microsoft article “XADM: How to Move Exchange Server to a
New Computer with the Same Name” (http://support.microsoft.com/support/kb/articles/q155/2/16.asp).
2.To move user mailboxes to the new server, start Microsoft Exchange Administrator, click Tools, and select Move Mailbox. You can move all the mailboxes at once, one at a time, or several at a time. In many cases, you can move mailboxes during working hours
because each user is locked out of his or her mailbox only while that mailbox is being moved.
3.Create replicas of the public folders on the new server. When the contents of the folders have been replicated (do wait a little while!), remove the folders from the old server.
4.Create new connectors on the new servers. Change the costs of the old connectors you're replacing to be higher than the new ones, then recalculate routing.
5.Create mail exchanger (MX) records pointing to the new Internet Mail Service (IMS) as appropriate, and change the cost on the old MX record so that it’s higher than the costs on the new records. When you’ve verified that messages are flowing across the
new connectors, remove the old ones, then recalculate routing again.
6.Follow the steps in the Microsoft article “XADM: How to Remove the First Exchange Server in a Site” (http://support.microsoft.com/support/kb/articles/q152/9/59.asp) if the server
you're replacing is the first one in the site.
7.Leave the old server up for a while to give Messaging API (MAPI) clients time to connect to the new server automatically ( the old server provides referrals to the new one). It's true—you don't have to reconfigure MAPI clients!
8.Tell POP3 and IMAP4 users how to reconfigure their clients to point to the new server.
9.If you have a WINS or DNS alias for the old server, point it to the new server.
10.Stop the Exchange services on the old server, then use Exchange Administrator to delete the old server's server object, thus removing it from the site.
I hope that helps you out.
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

Mail and Exchange 5.5 Server (Round 2) "Rejected Passwords"

Mail and Exchange 5.5 Server (Round 2) "Rejected Passwords"
This one is huge, as you may have seen in my other replies to Mail and Exchange Server, I have had this working for over a year no issues.
Every once in a while I get a user that I setup and all of the sudden their password on the Exchange (5.5) Mail server (running IMAP, OS X Mail app)
is REJECTED.
This is just no good, and still to me a Mystery.
Has anyone seen this?
It seems there is some corruption happening on the Exchange Server, with the users accounts, preferences, settings.
The one way to fix it, (that I have seen) and the Windows server guys hate this, but I say too bad, completely move the afftected User's Exchnage e-mail account to another Exchanage NT mail server (they have 6 old NT 4, Exch Servers), once that is done, Mac OS X Mail app connects fine and ha no more issue with Rejecting passwords.
Any feedback appreciated, thanks,
[email protected]

I think I have the same problem without Exchange involved. I have seven different email accounts and two of them are acting like you describe: changes like deleting doesn't reflect on other clients (like mobile phone email client and webmail).
This also happens with read emails showing up unread so that if the email is been read and deleted same message can appear as new and when that message is deleted I can see two separate items of that same email message.
Also all marks of reply, forward or flagged are gone when the email show up as new again.
My service provider said that updates to Mail.app have previously made some big changes to way how it acts with email servers and thought that Mail is misbehaving with my two email systems.
I am using IMAP protocol with all accounts.
Thanks for any info and help!

"Send As" permission fails with users in second domain on same server

I have several users setup on an Exchange 2010 SP3 server with domain "domain1.com". "Send As" and full Permission access works fine and flawless between those users who need it.
Now I have added a second authorative Domain (domain2.com) on that server and set up a few users. Those domain2 users can send/receive email in domain2.com without problems.
I wanted to give certain users in domain1 "Send As" and Full Access permissions on a domain2 user mailbox. Full Access works, but sending a message won't work. The error that comes back is the same as if "Send As" permissions was not
assigned to that user. But I explicitly assign this permission.
Is this a known issue and there is a fix for it? Or is this simply not possible?
Thanks
Dan

First, you should not use both Send As and
“Send on behalf of” pick one or other. Another thing, if you are using
Send As, find the user in
Active Directory Users and
Computers right click the user and select properties, Click
Security
Tab then presses the
Advance button.
In there you should see the User listed under there with Send As permissions. If you do not see this that’s the main reason why you cannot “Send As”. Send As is an AD
ACL not Exchange. If you have set this in the EMC and it has not replicated or updated the ACL’s in Active Directory then you might have a delay/latency or a replication issue with Active Directory.
Hi Swetha,
Thanks for your reply.
I am only using "Send As" and not "Send on behalf".
The Send-as permissions are visible in the AD for that user.
Dan

My macbook air cannot sync with my office microsoft exchange 2010 mail server

My macbook air cannot sync with my office microsoft exchange 2010 mail server.
It used to work perfectly, and then I lost connection and was never able to establish one. I re-istalled my e-mail account several times, no success.

I am sure all of you got your email issues sorted out by now but i was having trouble settings up exchange email on my Iphone 5S, and the problem i found was to go to settings, icloud, then log into icloud with your apple id first (before setting up the exchange email). Once i logged into my icloud account on my Phone 5S, the exchange server email starting working and synching right away.
to confirm this worked, i even deleted my email account and deleted my Icloud accounts both from my iphone was able to simulated the same exact problem (exchange server would not sync with my Iphone 5S) until i logged back into my Icloud account on my 5S.
Again once i logged into Icloud, the exchange server issues went completely away.
Just wanted to post this so anyone else having the issue could see.

Lync + Exchange on Same Server?

Similar Messages

Maybe you are looking for