Mac interruption due to phototocartoon plug in

My mac connection gets interrupted and I get an error message that it's due to phototocartoon plug in.  Has anyone had this problem or know how to resolve.  When I try to send info to Apple I get another error message stating the info cannot send and to try later.
Thanks!

Remove the "photocartoon" plugin, whatever that is, and relaunch Safari. The plugin is in one of two folders, which you can open by selecting Go ▹ Go to Folder… from the Finder menu bar and entering first one, then the other, of the following lines:
/Library/Internet Plug-ins
~/Library/Internet Plug-ins
You're running Mac OS 10.5.x, and Apple no longer accepts crash reports from that version.

Similar Messages

  • The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse.  HELP!!!  Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.

    The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse.  HELP!!!  Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
    Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back  in.
    Have not updated it in a little bit
    running mavericks, which I dislike.10.9.1
    This is a new problem,
    Why where and what do I need to do to fix it? Please.
    Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
    I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
    you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
    Especially an inconvenient for previous Numbers users as you all know.
    any word on New Numbers Tutes at all??
    You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout.....  Just saying...  not.
    anyway Hi and any help out there tonight is GREATLY APPRECIATED.
    Cheers Jason.

    If the reset doesn't work:
    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Apologies, this item has been interrupted due to an error...

    Hi there. Recently i have changed motherboards/processors in my desktop PC (but kept the same hard drive). Since then, when i go to view Sky Go on my desktop, i get the following error message: “Apologies, this item has been interrupted due to an error. Please click play to resume watching. [t:6013 / c:4110 ].” I have worked through the steps on the support page and none of these have remedied the problem. I decided to leave it to the new month as I thought maybe it a was a maximum device limit issue, but I have removed what was my old PC and have tried to view a channel on this device, yet the same error message occurred. I have cleared all browser cookies, have reinstalled Silverlight and have set permissions for chrome or adblocker, not to block SkyGo. I have also tried viewing on Internet Explorer and Firefox and have the same issue.  Can anyone else lend any ideas on how to sort this?  Thanks 

    Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].
    2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Click OK to close the dialog.
    3. Close the browser (if you don't the next bit will fail as it will be using the file you need to rename).
    4. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady
    Note: This folder might be hidden on your PC, if so in explorer select Organize->Folder and Search Options->View->Show hidden files and folders and click OK.
    5. Rename the file mspr.hds to mspr.hds.OLD
    Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight.
    6. Log back into Sky Go and click 'Watch live TV', this time you should see a message saying something like downloading security components.

  • Hello my OS upgrade process was interrupted due to Internet failure, how may I re-try to upgrade it? I got a message that says I can´t, the serial number can be used only once!

    Hello I bought a macbook pro on August this year and got a bonus to upgrade the OS from Lion to Mountain Lion for free. I started the donwload but it was interrupted due to internet failure so the upgrade process was aborted. When I tried to initiated the process again, I got a message that says I can not used the same serial number to download Maountain Lion. What can do in order to upgrade the OS using the "bonus" I received with the purchase?

    I have the same problem, only Purchases in the App Store shows nothing. The download NEVER showed up in the App Store only in the Launchpad with a progress icon. The Icon said paused but when clicked, it just disappeared with no download.
    How am I supposed to get my free upgrade now?

  • What do I do if I cannot download mac osx due to no space on my computer?

    I cannot download Mac OSX due to not enough space on my computer. What do I do to
    create space?

    Free up space.
    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?

    I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?

    Yes your 2010 supports Target Display Mode using MiniDisplay Port input.
    check out FAQ #4 > Target Display Mode: Frequently Asked Questions (FAQ) 

  • Mini mac will not register my digital camera. It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.

    It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.

    Have you downloaded everything that is on the camera? If so format the SD card on the camera (will erase everything on the card).
    If you have not downloaded everything can you see stuff on the camera? If you have a card reader you could try putting the SD card in that and trying on the mini. If your mini has a SD card slot you could try that.
    In any case format the card on the camera before taking more pics.
    Next time be sure to eject the camera from the Mac properly and turn the camera off before disconnecting.
    EDIT: You might also check the camera's USB Mode is set to PC.

  • Why does my Mac give me a 'blocked  plug in' message when i try to open Castleville?

    Question
    Why doesn my Mac book Air send a 'blocked plug in' message when I open Castleville?

    Click on that message and follow the instructions.
    (81803)

  • Itunes wont open on mac or sync when i plug in phone?

    Hi
    Can any one help
    i can no longer open itunes on comp. if i double click nothing
    if i plug in apple device it wont sync or open itunes.

    Hello jstryder,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Mac won't open automatically when connecting device
    http://support.apple.com/kb/TS3927
    Best of luck,
    Mario

  • My mac isnt recognizing that i plugged my iphone in

    I want to plug my iphone in to my mac, but it wont even recognize that it has been plugged in

    Try:  http://support.apple.com/kb/TS1591

  • Crashing due to ProCore plug-in

    Greetings
    My first post. I’m a junior-ish user of FCP and Motion. Problem: FCP crashes while rendering a finished project. It will execute slowly for an hour or so and then quit. The dialog box says: “The problem may have been caused by the ProCore plug-in.” I tried rendering smaller sections instead of the entire piece, and that works. I then tried increasing the size (the temporal length in timeline) of the section for rendering, but FCP went back to quitting unexpectedly and reporting the ProCore plug-in again as a possible cause.
    I have searched discussions and the web for mention of the ProCore plug-in, but found nothing. I did try repairing the hd from the CD (no problems found); repaired permissions and zapped the PRAM, set FCP Sequence Settings Master Templates & Motion Projects quality to normal and deselected Always Use Best Quality, but the problem persists.
    I have AppleCare, but I wanted to try this braintrust first.
    MacBook Pro Core 2 Duo 2.6 GHz, OSX 10.5.1, 4 GB, Lacie 160 GB external drive.
    The project is about 6 video tracks deep, six minutes long, consisting of still images, motion graphics and animated type from Motion. Lots of transitions and filters.
    I have the Problem Details copied and ready if someone asks, but I won’t include it now because of its length.
    Thanks all in advance.

    Thanks much, Bogiesan. That's what I'll do. Should let me meet my deadline and demystify further after.
    For fun, here's the first few lines of the Problem Details:
    Process: Final Cut Pro [384]
    Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: 6.0.2 (6.0.2)
    Build Info: FCPApp-711051055~7
    Code Type: X86 (Native)
    Parent Process: launchd [81]
    Date/Time: 2008-01-07 09:30:01.038 -0500
    OS Version: Mac OS X 10.5.1 (9B18)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 0
    Thread 0 Crashed:
    0 libSystem.B.dylib 0xffff08a0 __memcpy + 256
    1 ProCore 0x0ff0fa86 PCBitmap::flip() + 120
    2 com.apple.ozone.framework 0x214ef9c1

  • Compressor/FCP quits unexpectedly possibly due to ProMedia plug-in

    Hi all
    I am sending a finished project to Compressor from FCP, without rendering first. Much of the project is comprised of embedded Motion files. I keep getting a "quit unexpectedly possibly due to the ProMedia plug-in" alert. After repairing the HD, fixing permissions, zapping pram, trashing plists and re-installing the latest pro apps update, FCP still quits on Compressor with the above alert. The audio makes it through, but not the video. Any thoughts? Thanks in advance.

    Thanks David. The job will be delivered on DVD, so that's an extra render, yes? Would I render with an uncompressed or Animation codec before sending it to DVDSP?

  • Mac Pro due to arrive today- send it back?

    A few weeks ago- I was reading great praise for the latest Mac Pro and the 8800 card.
    I have been using a PowerPC Quad for the last 2 1/2 years- so I figure now is a good time to upgrade to an intel machine.
    I bought the MacPro 3.0
    1TB Boot drive
    8800 card
    It's due to arrive today.
    Last night I start reading some posts- looking for any "heads up" issues- and suddenly there seems to be many issues.
    sleep- reboot, crashes, kernal panics, and a benchmark that claims the 8800 card is slower than the stock card.
    I don't have a good feeling.
    Is all this reason to send it back?
    Do all current Mac Pros suffer these issues?
    I run FCS2. Shoot and Edit video for a modest living.
    My Quad is solid. But it's getting to be outdated with some of the latest HD codes. (I can't use it with the Sony HD cam without a major workaround.)
    Is it safe to assume that all the issues can be fixed by firmware updates?

    I've had the 2.8 early 08 MP since the day after it was announced. I cross-graded from a 8-core 3.0 primarily to get the latest thing, faster RAM [i replaced all the RAM from my old machine with 800MHz sticks] and the 8800GT card (which I just added yesterday via Apple's kit).
    I have had no problems at all with it except for the reboot on sleep which went away with a PRAM reset. It's been very stable.
    10.5.1 and 2 also brought a number of bug fixes. The system is certainly very stable now.
    I am disappointed by the 8800's scores being no higher in Motion (on a RAM preview) than the 1900XT or even in many cases the stock 2600c card. However:
    - the 8800GT is much faster than the stock card when performing real-time rendering such as playing through your timeline and not rendering to RAM, at least 2X faster for me on my current project
    - the 8800GT is much smoother in general UI use, such as loading large stacks of icons from the dock
    - the 8800GT destroys the 2600 and handily beats the X1900 as well in gaming, especially under Windows (Boot Camp.)
    So to say the 8800GT is a waste of money is kind of silly if you are interested in any of these things. If you only do Motion RAM previews, the stock card at this juncture seems fine.
    I'd think refusing your computer is silly at this point unless you really don't want it.
    Message was edited by: controller2k

  • Pr CC Mac: third party audio VST plugs issue

    The GUIs are garbled and useless on my VST plugs from WaveArts.  But, the AU versions work fine.
    Another bug in Pr CC Mac.
    Anybody else?

    Now that you mention it, none of my plugs are showing up in Au CC; VST or AU.  I don't use it much.  The mix tools in Pr are quite sophisticated enough.  I mostly use Au for broadband NR, and sample level click removal.
    The GUIs work fine in Pr CS6 and Au CS6.  So, I assume the problem is in Pr CC, and now Au CC.

  • MAC OS X Clientless VPN Plug-in Installation Problem Solved

    I have nearly pulled my hair out trying to get clientless VPN connections to work for Mac users looking to connect into our RV220W.
    The key is to connect to the router as root the first time in order to avoid VPN plug-in installation permissions issues.
    Preconditions: Java must be installed. Installing Java 7 for Mac OS X is 64-bit. This means that 32-bit browsers like Chrome cannot be used and that only 64-bit browsers like Safari will work with the plug-in.
    Part 1 – Install the VPN Plug-in
    Enable the root user account.
    Log into the Mac as root.
    Connect to the RV220W VPN portal.
    Enter your credentials.
    Select VPN Tunnel menu item
    Hit the SSL VPN Tunnel Client Installer / Launcher icon.
    When prompted, run the Installer.
    The VPN should connect.
    Disconnect from the VPN and log out of the root System Administrator account.
    Part 2 – Use the VPN Plug-in
    Log in as your normal user account.
    Connect to the router’s VPN portal.
    Enter your credentials.
    Select VPN Tunnel menu item
    Hit the SSL VPN Tunnel Client Installer / Launcher icon.
    When prompted, run the software.
    The VPN should connect.

    I solved my problem by downloading and installing the "Final Cut Pro Universal (supports Intel)" .sit version of the plug-in, which is not the default. I will inform StageTools that the default .zip download doesn't seem to work.

Maybe you are looking for