Mac Mini and Bluetooth connectivity

Can I install an Apple magic mouse and magic trackpad with my Mac Mini (early 2009) using OS X Lion ?  Anybody have this set-up ?  Any issues with having both active bluetooth devices ?  I'm currently using the magic mouse and want to add the trackpad when I upgrade from Snow Leopard to Lion.

It will see each device as a unique BT device and there should be no issues pairing both. I do not have a M Trackpad, but as an experiment, I paired two Magic Mouses. No issues.

Similar Messages

  • Mac Mini and Bluetooth Recent Problems (Mighty Mouse, Wireless Keyboard)

    Hello there,
    I have an issue with my Mac Mini.
    We had a storm here recently, so I switched my Mac off. After that, I turned it on, but to my surprise my Wireless Mighty Mouse and Wireless Keybord do not function any more. The green dot under the mouse nad keyboard flashes for a few seconds and turns off. I tried to plug my regular mouse and keyboard but it seems the do not work too. Any solutions?

    i dont know if you have another mac around but have you tried repairing the disk by putting it into Target disk mode and hooking up another mac to it? if nothing else, try putting the install CD/DVD and boot from there by holding down "c" as it boots. if that works then it may just be a bad BT card. if it doesnt work then you may have bad usb ports. i hope you have applecare!
    a tip for bluetooth HIDs, spread them apart. you will experience problems on occasion where their signals get crossed and they fail to sync right.
    by the way, if you went the extra mile to turn off your mac because you were concerned about it, then why didnt you just unplug it from the outlet?

  • Mac Mini and Bluetooth Keyboard and Mouse

    I have a Mac Mini as a server. I've decided to do a clean install of Mountain Lion and Mountain Lion Server. I don't have any wired keyboard or mouse and am having trouble getting the Mac Mini to see the keyboard and mouse. I can buy cheap wired ones but I'd like to use my bluetooth ones if at all possible. Can anyone offer some tips for doing this successfully? I need a method that assumes I have a Mac Mini with a clean, formated disk and a bootable flash drive with the latest copy of Mac OS X Mountain Lion.

    I did unpair the mouse. The keyboard has only ever beenpaired with the Mac Mini. Today I was finally able to get both devices talking with the Mac Mini, but I really don't know how I did this. I just played with turning them on and off. If the Mac Mini has been newly formatted (as I finally managed to you), is the pairing information retained?
    I'm thinking there is more to this issue than just bluetooth pairing.
    Thanks for your quick reply. (I'm still redownloading Mountain Lion from the Apple store and making a new bootable flash drive as the one I had won't let me install. Not sure why.)
    (If the issue is just one of pairing it would appear I don't need a wired mouse and keyboard.)

  • Mac Mini and Bluetooth

    Is there any other way that I can use the Bluetooth Module with out buying the complete AirPort Extream/Bluetooth Kit and without using the Bluetooth Dongle?
    Mac Mini 1.42 MHZ Combo Drive   Mac OS X (10.3.9)   512 MB DDR 80 GB HD

    You mentioned the only two modules I am aware of.

  • Mac Mini and thunderbolt/vga to LCD TV

    Hi All,
    Here is an interesting one......
    I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them.  The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
    The HDMI/DVI is not used.
    In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
    If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor.  If I then change cables without a reboot, the LCD TVs show correctly!
    I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary.  However, on reboot it's as if the details are all forgotten!
    Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs.  That said, I wanted to put my environment out there and see if anyone had an ideas.
    Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
    Thanks for ANY ideas!!!!

    Hey Spost!
    You have explained exactly what happened to me last night.  I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week.   I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.  
    Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet"  airplaying prior to the move worked great ... then last night 4:3 Green Screen. 
    My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out.   Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac. 
    Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run. 

  • Airport Express problems with new MAC MINI and DLINK router SOLVED

    Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
    I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
    Problem was briefly
    Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
    also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
    Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
    last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
    I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
    between us we carried out the folowing and resolved the problem and I am now very happy
    mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
    This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
    Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
    We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
    we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
    this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
    you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
    Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
    Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

    Hello macfar14. Welcome to the Apple Discussions!
    For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
    Just to be sure nothing was missed, here are the basic steps to do this:
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network's Network Name or SSID>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

  • What does connecting iPad mini to my Mac Mini  through Bluetooth do

    what does connecting iPad mini to my Mac Mini  through Bluetooth do

    There is nothing else you can do as regards the Mac. Bluetooth between a Mac and an iOS device works only for tethering so you can share the iOS device's cell connection. Otherwise, Bluetooth in an iPad is for connecting to peripherals such as headsets, in-car systems, and keyboards.
    Regards.

  • Mac Mini will not connect to Air on bluetooth.

    Mac mini will not remain connected to Mac Book Air when pairing with bluetooth. Pairing initially goes as expected providing the code.  When pair is pressed the two systems connect for about 1 second and then system states that they are not connected.  I am operating 10.9 on the Mac Mini and 10.8.5 on the Air

    To my knowledge, you cannot connect two computers using Bluetooth. You can connect them, of course, via a network.
    Barry

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Connecting new mac mini and a pc to internet

    I have ordered a new mac mini and airport express to connect it to my broadband connection. I have a none wireless pc already connected to the DSL. This is a usb connection to the pc.
    Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port? Will this work and would the Mac then pick up the connected printer?

    Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port?
    No, this will not work. To use an AirPort Express (or AirPort Extreme) base station, you will need a DSL modem that has an Ethernet port. The reason is that the USB connection requires a software driver to be installed on your computer. Since it's not possible to install drivers (Mac OS, Windows or otherwise) on the AirPort Express because it's not a computer, you'll need to use the Ethernet port. I would recommend you visit the AirPort Express forum. There are some knowledgeable people there who can help you find a new modem that has Ethernet and get everything configured for you.
    -Doug

  • Can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    Investigate the Air Display App to see if it will do the job for you.

  • I have a Time Capsule as my router.  I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

    I have the Time Capsule hooked to a wireless modem.  It uses a static IP, which is put in and running.  The MBPr connects, as well as my iPhone 5, to the internet and network without problem.  I can see the Mac Mini, external drive attached to it, and the Time Capsule.  The Mac Mini connects to the network wired or wirelessly, but not to the internet.  On wireless, using AirPort the Internet shows green, but no connection when I open Safari.  The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr.  I was hoping someone might have an idea of what was going on.  Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

    No, its is connected direct to the providers fiber box.

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • Internet connection sharing between Mac Mini and Imac G3- how?

    Ok, I'm trying to connect my G3 Imac (running 10.4.8) to my Mac Mini (also running 10.4.8) but it just wont work.
    I've turned Internet Connection sharing on on my Mac Mini, and set it to share the airport connection to computers connected using Built in ethernet.
    Network (on the M Mini) shows
    Built-In Ethernet is currently active. Built-In Ethernet has a self assigned IP address and may not be able to connect to the Internet.
    Network (on the G3) shows
    Built-In Ethernet is currently active and has the IP address 192.168.2.7. You are connected to the Internet via Built-In Ethernet.
    When i try to go to a webpage on the G3 it fails stating, 'You are not connected to the Internet'.
    I'm using a standard straight through ethernet cable, as I was told a while ago from apple support that it doesn't matter which u use, straight through or crossover.
    Any help would be really appreciated
    Macbook 2.0Ghz 2GB 80GB/Mac Mini 1.42Ghz 1GB 80GB/Imac G3 450Mhz 640MB 80GB   Mac OS X (10.4.8)  

    OK after some playing about I can now manage to connect to the mac mini and vice versa to share files.
    The iMac G3 now says it has an IP address of 192.168.2.18, and that it's connected to the internet via built-in ethernet. I've set configure IPV4 to Using DHCP.
    Except it's not connected to the net.
    If i select Using DHCP on the Mini it doesn't obtain an IP address, not even a self set one. So i've set a manual IP address on that, and everything shows up green. Airpot connected to the internet and Ethernet has an IP address of 192.168.2.30.
    After reading some forums I set up firewall logging. The result is what happens on the Mac Mini when I use network diagnostics on the G3:
    Feb 11 16:43:52 richard-xxxxx-mac-mini natd[394]: failed to write packet back (Host is down)
    So I opened port 394 (not really knowing what i'm trying) but it had no effect.

  • HT1296 when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    Thanks for your advice. However my private informations have nothing to do on a wandering cloud that floats on high over US vales and hills ( and credit to William WORDSWORTH for his poetry)

Maybe you are looking for

  • Itunes 7- Unknown Error (-200)

    Everytime I try to start Itunes I get the message An. Unknown error occured (-200). I tried uninstalling and reinstalling the ituens program any suggestions?

  • Dynamically change the table fields in smart form

    hi all, can any one suggest me the way to change the height and the width of a table dynamically in smart form. thanx Manish

  • VM Template bypass Local Admin Password, can it be done?

    I was curious to know if there was a way to create a VM from Template in VMM without having to supply a password in the OS Configuration properties? I know that if we leave that field blank normally, when the VM creation occurs, it will get to about

  • Blue Question Mark(s) of Death

    At random times on Facebook and with various ads, I'll get the dreaded blue question mark in place of a thumbnail. It's annoying as **** and I've never found a fix for it. I've reset Safari, emptied the cache, but it's not just Safari-related: it's h

  • Forecast Values

    Dear Friends For forecast based planning what is the difference of entering the forecast values in MM02 and in MD61, also i want to know whether  the system will automatically get the forecast values, insteaded of entering manually. If i want to chan