Mac OS X 10.7, JTDS Drivers, and Windows Authentication

I'm trying to connect to a Microsoft SQL Server using JTDS 1.2 drivers loaded to SQL Developer via the third-party JDBC drivers preference. This configuration works with other applications, and I'm able to contact the server, but the Windows Authentication connection option in Oracle SQL Developer doesn't seem to be working. Is anyone else having this issue? Is there some place in this application that I can set my DOMAIN? The closest match to a similar problem that I have found is in the last post of this thread:
Can not connect to sql server on port 1433
...but I'm unable to find the connections.xml file that this poster is referencing. Any help is appreciated.

Thats awesome! Thank you, that was exactly my problem... however now I keep getting an error that says "The user is not associated with a trusted SQL Server connection". I've tried about every combination. I put my windows login and pwd, and I assume "windows authentication" should still be checked, and port and domain both filled out. The only thing I change in the connections xml file is to change the customURL entry to jdbc:jtds:sqlserver://myserverhose:myportname/;domain=mydomainname. Any thoughts? I'm worried it may just be a setting SQL server I can't change.

Similar Messages

Get an error for changing the windows authentication mode to the both SQL and windows authentication mode

I installed the SQL server Express 2008 R2 and then SQL Server Management Studio 2008 R2 . But during the installation, I could not choose the both SQL and windows authentication mode and an error accrued so I did that just with windows authentication mode.
Now, I want to change the windows authentication mode account to the SQL authentication mode but it shows me an error which is you do not have permission (Although I am the administrator in windows), what can I do?
Following steps are the steps that I went but I got an error:
Server properties >> security >> choose the option of SQL Server and Windows Authentication mode
and the error that I got is attached(access is denied)
Can you please help me?

You can change the setting after you gain admin rights to your SQL Server. You don't admin rights automatically, you have to explicitly add yourself during the install
Here's a guide on how to (re)gain those rights:
http://v-consult.be/2011/05/26/recover-sa-password-microsoft-sql-server-2008-r2/

Exchange 2013 CU6 OWA - FBA and Windows Authentication (coexistence)

Hi,
Is it possible to run FBA for outside clients and Windows Authentication for inside clients?
I have tried to setup FBA and WA on different WebSites without luck :-(
Best regards - NH
[Edit, typo]

Hi,
I recommend you create the second OWA/ECP virtual directories in a new IIS web site with a different IP address, and using it for internal client access.
You need to prepare the secondary IP address for CAS server, and then in the IIS manager, create a new Web Site. Create the second
OWA/ECP virtual directories in this new IIS Web Site.
You will also need to ensure that whatever name the internal use will be using to connect to the new
OWA/ECP site is present on the installed certificate and the name resolves to the correct IP address.
Then you can enable integrated windows authentication for internal users and enable forms-based authentication for external users.
Best regards,
Belinda Ma
TechNet Community Support

My solution for No Audio -- Conexant drivers and Windows 7 x64

My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/ About half way down you will find the sub-directory with these files. Just right click each one and save to your desktop.
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C;/swsetup/ This is the directory where HP updates default to.
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file. It did not work the first time -- I missed a line in my cva file. However, I then manually installed the Conexant drivers as follows and voila I had sound, nice crisp clear sound.
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then" Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then Conexant, then "Have Disk" . Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
This question was solved.
View Solution.

I thought that I would recompile my answer and then mark this thread as solved since it was not a post about a problem but rather how I solved a very common problem that might be of benefit to others.
My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/sp35501-36000 About half way down you will find these files. Just right click each one and save to your desktop.(The 32 bit files are in a different subdirectory at ftp://ftp.hp.com/pub/softpaq/sp??????-??????)
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C:/swsetup/ (This is thedefault directory for HP updates.)
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file and voila I had sound, nice crisp clear sound.
The use of the cva file is to streamline the driver install and it is kind of cool if it works. If you cannot find it or you are not successful the first time or you do not want to bother with modding anything, do not worry, the manual install will work for sure.
Run sp35558.exe to extract everything and let it strike out. Then go to Device Manager and update the driver manually as follows:
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then "Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then "Conexant", then "Have Disk". Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
Hope this helps.

CS3 dds drivers and Windows 7 64bit issue

I have photoshop CS3 working however I can't load the dds drivers. I've tried everything see below. Anyone been able to load the Nvidia dds drivers?
What is the proper proceedure to effectively install the DDS files in CS3 in a windows 7 64 bit environment?
I tried the 32 bit and 64 bit files and when I use the 32 bit file i get an error opening up photoshop that says missing D3x9_43.dll, and I don't have the option to save in a .dds format. If I uninstall the dds 32 bit program the missing D3x9_43.dll error goes away.
When I load 64 bit version no errors but I still don't have the option to save in .dds format. Kind of frustrating..................
I've just uninstalled and cleaned CS3. I've done a new fresh load of CS3. What are the correct steps from here?
Which file should I download? etc.
Thank you in advance.
Ok, I've tried everything I can find.
I let the 32 bit dds program load to a seperate folder and manually transfered the files to the proper folders in Photoshop and still get the same results as above. I tried renaming them and removing the 32 extensions and still no go. I did the same thing with the 64 bit program and still no go.
The 32 bit program said it was still looking for the D3X9_43.dll file for some reason. I haven't tried downloading that file since I don't know where to put it.
Can someone please help me. Has anyone got the DDS files to work with CS3 and Windows 7?
Thank you
Bill

Got it fixed. I loaded the drivers from my old XP machine. drivers are from 2007. Don't remember where I got them from but they worked. I can save dds files again.
Thank you for the reply.

SharePoint 2013 and Windows authentication (integrated) or SharePoint user for report data source

Hello,
I am having issues creating report datasource in "Windows authentication (integrated) or SharePoint user" in SharePoint 2013. I followed the steps mentioned in the link http://blogs.msdn.com/b/psssql/archive/2014/04/28/sharepoint-adventures-using-claims-with-reporting-services.aspx.
I am just stuck in the delegation piece here. I have a SSAS instance by name "XXXXAPPV01\Multidimensional". First thing is what is the procedure to set SPN for this instance? I need to add this service in the delegation tab so that C2WTS service
configured correctly.
Nothing but I should be able to access my SSAS 2012 cube from SSRS 2012 by "Windows authentication (integrated) or SharePoint user" as the authentication method.
Palash

I used the below command to set SPN for analysis services.
setspn -S MSOLAPSvc.3/XXXXAPPV01APPV01.xxxxdmo.local:Multidimensional xxxxdmo\svcMyService
After setting the SPN for this service account I added this account(xxxxdmo\svcMyService) in the delegation tab of my domain account created earlier for claim service (xxxxdmo\svcC2WTS). Now in service type it shows -> MSOLAPSvc.3, User or Computer it shows
-> XXXXAPPV01APPV01.xxxxdmo.local and in Port it shows -> Multidimensional. This is in my svcC2WTS account delegation tab. Still I am not able to connect datasource by "Windows authentication(integrated) or SharePoint User". I am getting the
same error "Cannot convert claims identity to windows token".
I am not sure what am I missing in this configuration piece yet to get this working.
Palash

FBA and Windows Authentication

In SharePoint 2013, if a user is accessing a SharePoint site from outside the local network: When they get to the site and chose an authentication method, Windows or FBA, can they chose the Windows authentication and enter their normal domain login? If
the user is on the domain network, when they chose Windows authentication it sees who they are on their computer and lets them get to the site. I am trying to understand how it works for that user if they aren't on the domain network.

Hi kamikoz,
Per my knowledge, you need to configure FBA and allow external user to login into the application using the credentials that are given to them, you can refer to the blog:
Configuring SharePoint 2013 Forms-Based Authentication with SQLMemberShipProvider
More information about user authentication, please refer to the links:
http://technet.microsoft.com/en-us/library/cc262350(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj219571(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/ms457529(v=office.15).aspx
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

SharePoint Designer 2013 with SOAP DataSource and Windows Authentication

Hello
What do I need to do to create a SOAP Data Source in SharePoint Designer 2013 with Windows Authentication?
I am trying to display a list from another subsite in my Web Part Page using a DataView web part.
My environment is set up to use Claims with Kerberos.
Is there a guide available that talks about configuring this or troubleshooting this? What should I check?
Thanks for any suggestions.
Yoshi

Hi,
According to your post, my understanding is that you wanted to create a SOAP Data Source in SharePoint Designer 2013.
Please refer to the official article related, although it is about the SharePoint Designer 2010, it still works for SharePoint Designer 2013.
http://office.microsoft.com/en-in/sharepoint-designer-help/add-a-soap-service-as-a-data-source-HA010355752.aspx
More information:
http://social.technet.microsoft.com/Forums/en-US/20e34a68-fa78-4450-9744-45f9e3ff26b5/sharepoint-designer-soap-and-rest-datasource-failure?forum=sharepointcustomizationprevious
http://sharepointdiva.wordpress.com/2012/03/19/create-cross-site-data-source/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

CFM and Windows Authentication

My web server is using Windows Authentication to control
access to different directories. I need to be able to use
IsUserInRole to determine what links a user will see based on the
Group they are in in Active Directory.
Example - I have a Group called Web Admins, and there are
several users in that group... so this piece of code should allow
them access to info if they are in that group:
<cfif isUserInRole("Web Admins")>
Yes in the
Role
<cfelse>
Not in the
Role
</cfif>
BUT - because of the way our network is set up - the user
account that is passed to IIS includes our domain:
mydomain/username.
So, when the IsUserInRole() function is called, it returns a
false response - the user is not in that role b/c it's reading the
username with the domain info still attached.
I figured out how to strip the mydomain/ from the username
for display purposes - but not the IsUserInRole() function. Any
ideas?

I struggled with the exact same problem.
I solved it as follows:
1) Central Admin / Security (left navigation) / General Security (group) / Specify Authentication providers
2) Chose the web application in question on the top right drop-down.
3) Click on the Zone in question. For me it was: default
4) Without changing anything, Click on <Save>.
After that, the problem was gone for me

Logon and Windows Authentication

Hi,
I want to implement windows authentication in the SAP portal. Requirements are -
1) Portal logon page will come if user has not logged on into the nertwork.
2) If user has successfully logged on to the network and firing the Portal URL in the browser, logon page should not come where as he/she should directly move to the second page( theme, nagivation, logout link etc)
Kindly let me know the pointers or guideline to implement this scenario.
Regards,
Sanjeev Mourya

Hi,
Thanks for giving me the pointers, it is helpfull. I have certain query based on the below scenario. Please help..me to understand
Scenario #1
                User logged on into network, when he/she is trying to access the portal url, he must get the main portal page instead of portal logon page
                Answer is true
Scenario #2
                User has not logged on into network, let say he has logged into the desktop with admin user. When this user will try to access the portal url, He must get the logon page, True or False?
Query 1. logon page will appear and ask for user id/password
                                or
                2. popup dialog box will appear and ask for windows UserID /password?
Scenario #3
                User has not maintain into Windows but available in portal.
                Query - 1. User logon would appear for user info
                                                or
                                2. windows popup dialog box will appear for logon info
                                3. when user enters the user details, where it will be authenticated in windows or in portal? Why?
Query # Can we maintain multiple UME for user authentication.i.e user will go to windows for authentication if available , if not then it will be athenticated by portal.
Regards,
Sanjeev Mourya

5640 drivers and Windows 8.1 ... some hardware issues

have the latest bootcamp drivers installed on my mbp in windows 8.1.
When i put the computer to sleep, then wake ... wifi will not reconnect.
Normally, on the wireless connections pane, directly above the list of wifi connections, the toggle switch says "WIFI". But after waking up from sleep, the toggle switch says "WIFI 2" ... in either instance, the toggle switch is set to on.
anyone know if this is a bug with the bootcamp drivers, windows or something else ? right now I have to pretty much restart to get wifi connected and working in windows.
the second issue I noticed: my keyboard backlighting doesn't come on instantly when the welcome screen comes up. in fact, it doesn't illuminate until i start toggling the dedicated illumination keys. strange behavior.
i've tried reinstalling the driver package from the 5640 zip, still experiencing these problems.
anyone have any info on what these issues might be caused by or anyone experiencing them as well ?

I have also been having this issue on my newly bought Late 2013 Retina MacBook Pro (rMBP), running Windows 8.1 Pro (using native EFI) with Boot Camp's latest drivers (version 5.1.5640). After waking up from sleep, the "Broadcom 802.11ac Network Adapter" becomes the "Broadcom 802.11ac Network Adapter #2" and subsequently "Wi-Fi" becomes "Wi-Fi 2," requiring me to reconnect to all of my networks since Windows seems to tie saved wireless networks to the driver.
Here is what I've found so far (note that when I say "Wi-Fi 2," I mean the driver is using the Network Adapter #2 instead of the original, numberless one):
This only happens to Windows--the Mac side is fine.
This only happens when Windows is put to sleep; hibernation and Fast Boot shutdown do not change the driver. I'm actually using hibernation right now as an alternative to sleep mode because it works fine.
Sleeping a second time within the same Windows session keeps "Wi-Fi 2" as "Wi-Fi 2."
I need to restart to get the original driver to work again. Shutting down *may* work, though, but since hibernation keeps "Wi-Fi 2" as "Wi-Fi 2" and doesn't change the driver back, I doubt it. Maybe non-Fast Boot shutdown would also fix it, but restart works well enough.
Essentially, sleep mode is unusable in Windows, since this network shuffle makes it so all networks need to be re-added.
Now, I have also noticed that booting into Windows with the Thunderbolt to Gigabit Ethernet adapter causes the Network Adapter to become "Broadcom 802.11ac Network Adapter #3" (and thus creating a "Wi-Fi 3" entry on the connection manager). I'm assuming that the Ethernet Adapter would also cause the Network Adapter #2 to appear if it were uninstalled previously.
AND, in the Windows Event Viewer, I see this, and I wonder if it is related to the above because the Wi-Fi adapter uses the PCI-express bus on the Late 2013 rMBP:
"The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance."
What the heck is going on here??
I have tried messing around with the Device Manager's various Power Management tabs, as well as the Link State Power Management stuff in the Windows Control Panel. Nothing worked, and I have since set everything back to normal and changed every "Sleep" option I could find to "Hibernate." This isn't an ideal workaround due to the writes this makes to the SSD, so if anyone has a fix or can help figure this out that would be most appreciated!

Problems with drivers and Windows after restoring

Hey All, I hope you can help because I have myself a confusing problem.
I have a Satellite A500 series laptop running Windows 7 Premium.
I recently had a hard drive fail. I have replaced the hard drive and used the restore/recovery disks provided to me by Toshiba.
My problem is, during the recovery I am informed that two drivers do not have the necessary Digital Signatures. These are the Realtek RTL9191SE Wireless LAN 802.11n PCI-E NIC and the TOSHIBA Firmware 64 bit Drivers.
Once recover was complete I tried to use the computer and had several issues that may be connected:
1. I cannot get any Microsoft updates- which includes any of the troubleshooting options etc. Apparently the service is not running. Even if I got to the website I can't get anything.
2. My Microsoft Office produce key code (printed on the botton of my laptop) is "incorrect"
3. My wireless will not work because there is no digital signature validation (code 52)
I know my wireless if functional because if I press F8 during boot up I get the option to ignore signature validations and can get on the internet. From there I did download and install an updated driver from the TOSHIBA website, which had no effect (I got the same error, even after uninstalling the other driver). Even while ignoring signatures I cannot update windows or use any of the computers troubleshooting or assistance.
I have tried restoring a second time to no avail (got the exact same errors). Any suggestions to getting this computer back to "out of the box?" Or at least functional enought I can surf the web and work on my Excel charts?
Thanks
Loren

In another thread, a similar problem was solved by installing the Intel driver iata_enu.exe from here.
Intel Rapid Storage Technology
That's supposed to take care of a change in the hard drive's properties.
-Jerry

CA-42 cable drivers and Windows 8 (x64)

Hi,
Are the CA-42 cable drivers compatible with Windows 8 available?
The ones that I have on a CD worked with Windows XP, but I don't think they'll be good for Windows 8.

Abi99 wrote:
Mhm. That helps a lot actually.
In the Windows Control Panel » Software, what is the version of your Nokia Connectivity Cable Driver: 7.1.182?
In the Windows Device Manager, was a Modem generated for your Nokia 6610i?
This rules out PC Suite and Nokia Suite, and allows us to concentrate on the USB cable driver. If no modem was listed for your phone, please, attach your Nokia 6610i and have a look at the USB devices. Is there any yellow mark? Context-click on that and refresh its driver. If that does not help: Are you sure, you have an original Nokia CA-42?
I can't see a "Software" category in Control Panel in Windows 8, so I can't check the version of my Nokia Connectivity Cable Driver.
Do you mean "Uninstall or change a program" in Control Panel?
No modem in Device Manager after connecting the phone. Does it need to be created? As far as I remember from Windows XP, no modem was created and the connection was initiated and worked OK.
No USB devices with a yellow mark, either.
The cable is, in fact, DKU-5, but it worked fine with this 6610i on Windows XP.
I read on other forums that you have to install virtual COM port emulation drivers for this cable.
I have the drivers on the original CD that came with the cable, and they were installed on Windows XP (x32) a few years ago and worked OK, but I don't think they will be compatible with Windows 8 (x64). Am I right?
Please note that I don't need a connection with a PC to use internet. I just need to transfer data (mainly text messages) from the phone to a PC

Issues with Mac OS X Server 10.4.8 and Windows File sharing

We are having lots of issues with our SMB share on Mac OS X Server 10.4.8. The main issues are the following:
- Group ACLs seem to not work properly, and I have had to add dozens of manual permissions on a per-user basis
- Often, users open a file in read-only mode, without any reason, and can't modify it
- Often, users open a file with full write access, but then cannot save it and have to use a "save as function".
After having looked all over the Internet and on the Apple's discussions forum, it seems like this issue has been around for quite some time now:
http://discussions.apple.com/search.jspa?forumID=702&threadID=&q=smbANDpermissions&objID=f702&dateRange=thisyear&userID=&numResults=15&rankBy=10001
http://discussions.apple.com/thread.jspa?messageID=1546867&#1546867
http://discussions.apple.com/thread.jspa?messageID=647251
And no real answer/solution has been provided by Apple yet.
I also looked on Samba related pages, and it seems like these issues were Samba related (both ACL/OpenLDAP and Microsoft Office file handling issues), and the current version of Samba (3.0.23c) seem to have solved lots of issues in these areas:
http://us1.samba.org/samba/history/samba-3.0.23c.html
Apple ships Samba 3.0.10 (16 Dec 2004) with 10.4.8, which makes the shipping version at list 15 versions (and 18 months) behind the current Samba release (30 Aug 2006).
People within the company are obviously quite unhappy with the situation and beyond me looking like a fool for migrating from Windows Server to OS X, I now need to find a solution to the issues.
I would like to know what is the official and Apple recommended way to solve this issue.
Kind regards,
Pejvan
It seems like Apple is totally ignoring the issues, users are facing with SMB shares, while their emphasize as a selling point how OS X Server is a great "windows file" server.

Hiya
Thanks for the reply.
>Is there a UPS involved?
I wish there had been. I might not be having to deal with it now! :-)
>If you boot from the Install Disc & use System Profiler there, does the Same RAM situation? Did you physically >check those slots? Thinking maybe the OS is kicking them out on bootup?
I've had the following suggested to me on another forum - "My guess on the RAM error is this. You have a processor that wants the RAM to be dual channeled and since it reads both A slot are populated it wants both B slots to be populated. Remove A2 and put it in B1"
But unless it is degrading performance I'll probably just leave it.
> Still can't get it to boot from the Clone holding the Option/alt key at bootup?
I can get it to boot from the Clone using the option key but it's a pretty random event. I can try for ages and then suddenly it'll work. Or it may work first time. It does seems to work more easily after a PRAM zap. The funny thing is that once it is booted up it will re-start in any way I want it to (the boot volume, the clone, a disk, single user mode etc). It is just hard to boot from a full shutdown.
I'm thinking that if I ca get the start-up issue fixed then I can fix the RAID issue at my leisure and even add the hard-drive that the clone is currently on to the RAID array.
Thanks again.

Help with HP G60 458DX Sound Drivers and Windows 8.1

I have recently upgraded my laptop to Windows 8.1 and my sound is non-existent. As stated in the subject line, I am running an HP G60 458DX, Windows 8.1, 64 bit and the sound device is a Conexant High Definiaiton SmartAudio 221, and a High Definition Audio Device. The driver information on the Conexant High Definition SmartAudio 221 is dated 10/2/2008, version 4.58.1.0
Please help.

Hello Tom-Tax,
I understand you are looking for an audio driver for Windows 8.1 on your HP G60 458dx Notebook. As it stands there are no drivers indicated by HP for this on their website. If you could post the Hardware ID of the Audio device installed in your system I will attempt to locate appropriate drivers for you. You can locate the Hardware ID by following the directions provided in How to Find Hardware ID.
I look forward to your response. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Mac OS X 10.7, JTDS Drivers, and Windows Authentication

Similar Messages

Maybe you are looking for