Mac OS-X server upgrade from v3.2.1 to v.3.2.2

Hi, I just upgrade my OS-X to Yosemite. But I found that my Mac OS-X server cannot work. It is version3.2.1 and I cannot upgrade to version 3.2.2. My server is now stop working. Any suggestion?
Do I need to delete the OS-X server and download the new one again from Apple Store. I need my server back again ASAP as it holds all my teaching notes for my students, thank you
Jimmy from Hong Kong

Thank you for your advice. Unfortunately, the Apple Store only has OS-X server 3.2.2. When I tried to upgrade it and I got the error message again " Server can’t be installed on “Macintosh HD” because the version of OS X is too new."
Any advice to find the OS-X version 4.0 from Apple Store.
Thank you
Jimmy

Similar Messages

I am new to mac's and have upgrade from Snow Leopard to Lion but......

I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
I came across this online and i want to know is it safe to do this:
Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
Restore your User folder and documents from your backup.
Run Software Update to get everything current, install your apps from your original install media and update those as well.
if any one can help me that would be great, thanks Mike

Before you do that why not do this first:
Repair the Hard Drive and Permissions
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
This will erase the drive so be sure to backup your files before doing this.

Mac OS X Server Questions from a Newbie?

After a lengthy discussion with an Apple Genius, I'm considering setting up my office Mac Pro 3,1 8-core tower with Mac OS X Server. From what I understand, this will enable users logging in with lower powered equipment to take advantage of the processing power of the Mac Pro. Plus, I'll be able to login via Ethernet when traveling and use applications that exists on the Mac pro as well as share files.
Does that mean that any Mac or PC logging into my Mac Pro as a client will effectively be a dumb terminal? Will PC/Windows users see the Mac OS X operating system on their laptops when they do this? I'm just trying to get a better understanding of how all of this works before I implement it.
Thanks!

From what I understand, this will enable users logging in with lower powered equipment to take advantage of the processing power of the Mac Pro.
I'm not really sure what that means, but it's true only if they log in remotely via Screen Sharing, and you don't need OS X Server for that.
I'll be able to login via Ethernet when traveling and use applications that exists on the Mac pro as well as share files.
That's true, but again, you don't need Server for it.
Does that mean that any Mac or PC logging into my Mac Pro as a client will effectively be a dumb terminal?
In a sense, if you're thinking of Screen Sharing.
Will PC/Windows users see the Mac OS X operating system on their laptops when they do this?
Yes.

Mail can't find IMAP mailboxes after server upgrade from 10.3- 10.4

For the past several years I've been running an IMAP server on my home network to allow me to keep all my mail in synch no matter which of my Macs I'm accessing mail from. (Bernard Teo's Postfix Enabler has been an amazing tool. See: http://cutedgesystems.com/software/PostfixEnabler/ ) Well, since I'm adding a RAID to the backup hardware on the same server later in the week, I decided to finally upgrade the server from Panther to Tiger. I can send and receive mail just fine. (I upgraded to MailServer from the site listed above.) However, all of my IMAP folders other than the associated inboxes have vanished, according to Mail.app. Now, when I check ~/Library/Mail the folders are still visible, and a quick Get Info tells me that they aren't empty. How do I get Mail to notice these folders?
A shot of the offending folder should appear below:
867 DP G4, Powerbook 1.67 Mac OS X (10.3.8)

More info: I've tried a variety of paths to the mailboxes, and this is the only one that has yielded anything. Still, it ain't usable, yet.
867 DP G4, Powerbook 1.67 Mac OS X (10.4.6)

Weblogic Portal ( Server ) upgrade from 10.0 MP1 to 10.3.5

HI,
We are currently attempting to upgrade WebLogic Portal Server in development environment and having problems when i run the installer. ( WLS1035_upgrade_generic.jar ).
I'm attempting this upgrade in Windows 7 professional environment ( 64 bit ) and it is a Windows VM with in a MAC OS X.
Problem : At the screen where it asks to Choose Middleware Home Type ---> click next   ---> it shows error message saying Product is not Installed.
Environment   :    Upgrade of WebLogic 10.0 MP1 portal server ( JDK 1.5_30 ) on a Windows Virtual Machine running using Parallels Desktop software
Existing attempts :
I went through the forums and tried
- Oracle's Minimum Technical Requirements says that i need to have JDK 1.6_24 and have installed JDK 1.6.0_35. ( jdk-6u35-windows-x64.exe ) .
   I'm currently running the setup from command prompt using this version of Java.
- Tried using BEA WebLogic smart upgrade. But it is not recognising our Oracle Support Login credentials. I tried doing this in offline mode having the above .jar and .zip file patch in the correct directory but its not recognising.
Weblogic home directory is c:\bea and it has got all the directories inside it -   i don't understand the reason why installer is not able to identify the existing WLS installation.
I would appreciate help around this as i'm not sure what else to try ?
Cheers,

I am not sure what you are doing is supported. You cannot upgrade a 10.0 to a 10.3.5 the way you are trying. The updater may be used to upgrade froma 10.3.x to 10.3.5 i believe. Check this out Upgrading WebLogic Server 9.x or 10.0 Application Environments to 10.3.5

Weblogic 6.1 server upgrade from SP2 to SP3

Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

Upgrade installer from SP2 to SP3 is only available for paid BEA
customers. You need a login at http://support.bea.com
Kumar
kiran rane wrote:
Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

SAP Server upgrade from Windows 2003 and 2008 R2 with Oracle Database

Hi,
We need to upgrade upgrade our Windows servers that are running our SAP systems from Windows Server 2003 to Windows Server 2008 R2. We are using Microsoft Clustering for HA so an inplace upgrade seems not possible.
Someone has suggested to us that we will need to export our database and reimport it to achieve this upgrade however but I cannot understand why this would be necessary (we are not changing the underlying filesystem!).
Could someone please confirm whether a database export and import is required for this OS upgrade scenario? I have done a bit of research but nothing has jumped out and now I need an answer to this quickly.
We are running
- ERP 6.0 NW 7.01 (soon to be 7.02 with ABAP stack only)
- XI(PI) Java & ABAP
- SRM (Java & ABAP)
- Portal (Java only)
- PLM (Java & ABAP)
- BW (BI 7.0) (Java and ABAP)
Thank You
Felicity

Hello,
You need to go for 'Homogeneous System Copy' to achieve this, but since almost all the systems in your landscape include the Java Stack as well - so the system copy with Export/Import is to be carried out.
Even if you are not going for file system change, but it is a Windows environment and you can't put SAP up on the target Windows (windows 2008 R2) just by copying the contents and file system from source to target. You need SAPinst to create the registry and all. - On top of that you have Java stacks involved, so for java stack you can't carry out just backup/restore method to put SAP up there on target - so you need Export/import because for java stack some OS level dump is to be collected during system copy from source and it needs to be imported on target OS.
Are you clear on this one ?
Read system copy guide once and Search in OSS for the Notes to check how to upgrade from Windows 2003 to Windows 2008 R2.
Thanks

Can I retrieve Bookmarks from Mac Firefox once I upgrade from Mt Lion (10.8.5) to Mavericks (10.9.5) or are they lost forever?

Years of Bookmarks on Mac Firefox were lost when I recently upgraded from Mt Lion (10.8.5) To Mavericks. I refuse to believe there is no way to retrieve them. Suggestions? Thank you!

''FredMcD [[#answer-717164|said]]''
<blockquote>
When you did the upgrade, was the hard drive formatted? Is there a
folder that has the old files in it? Do you still have your old profiles?
</blockquote>
When you did the upgrade ... April 10 ... was the hard drive formatted? ... Yes! Is there a folder that has the old files in it? ... Don't know. Where would it be? ... Do you still have your old profiles? ... don't know. Where would it be? Thanks!

SAP Content Server Upgrade from 6.3 to 6.4 & MaxDB 7.3 to 7.8

Dear Experts,
We are in planning of upgrade SAP Content server from 6.3 to 6.4 and MaxDB from 7.3 build 35 to 7.8.
For Content server upgrade is that we need to install the Content server 6.4 and install the latest MaxDB 7.8 and export and import the data.
We are on Win 2003 32 Bit and we are migrating to win 2008 R2 64 Bit.
Is it possible directly using database copy and restoring in MaxDB 7.8 version?
Or we need to use loadercli for migrating the data.
As per the SDN Link http://forums.sdn.sap.com/thread.jspa?threadID=1649661
for content server upgrade is by replacing latest dll files at the respective dir.
Pls let me know your views and known issues.
Thank You,
Mahesh

Hello Mahesh,
In note [735598|http://service.sap.com/sap/support/notes/735598] you can see:
If your source version is 7.3.00 or 7.4.03, read the upgrade guide "Upgrade to MaxDB Release 7.5" or "Upgrade to MaxDB Release 7.6" on SAP Service Marketplace:
http://service.sap.com/instguides > Other Documentation > Database Upgrades > MySQL MaxDB
Regards,
Eduardo Rezende

Failed OVM Server Upgrade from 3.0.2 to 3.1.1

I was trying to upgrade my OVM Server environment from *3.0.2* to *3.1.1* using the CD. I got the following error message after choosing the Upgrade option: Oracle VM server 3.0.2 (cciss/c0d0p2). The other option was to Reinstall System.
+"Error mounting device sda2 as /:+
+Device or resource busy+
+This most likely means this+
+partition hast not been formatted.+
+Press OK to reboot your system."+
My hardware is a HP BL465c G7 server, which is certified by Oracle to run the OVM 3.1.
http://linux.oracle.com/pls/apex/f?p=117:2:3396212307219555::NO::P2_CERT_ID:1871
Any advice that can help me find the way to upgrade my servers?
Thanks in advance,
Andrés L.

Hi,
I tried "yum update -y" and after reboot I encountered a kernel panic after the following message: switchroot: mount failed: No such file or directory.
So I got to reinstall ovm 3.0.3 from scratch.
Maybe the hard disk drivers in 3.1.1 kernel version (uek2) are not compatible with my server disks.
If someone has an accurate explanation to this issue, could be helpfull.
Best Regards,
Andres Loaiza.

Getting WSDL in reverse order after server upgrade from WAS 5.1 to 6.1

Hi All.I need your help.I am working in RAD 7.0 .After the IBM websphere upgrade from 5.1 to 6.1 i am getting the wsdl generated exactly in reverse order(in 6.1) as compared to that in version 5.1.Can you tell me wat can be the issue .We are using glue-pro jar for generating the WSDL.is there any setting in RAD or WAS which need to be changed so that i can get WSDL in old format.
Any suggestion or opinion is welcomed.

Does it matter? And if so, why does it matter?
From my previous experience with Glue you don't want to have it generate WSDLs anyway. It's not very good at it at all, generates WSDL that are full of errors.
Better to write your own WSDL and tell Glue to use those.

Mac Mini Server upgrading from Lion 10.7.1 to Lion 10.7.2 Freezes in upgrade install reboot. What's wrong?

After downloading and installing Lion upgrade 10.7.1, my Mac Mini (2010 model)) server will reboot to the Apple logo, but no spinning dial - freezes - requiring re-installation of the 10.7.1 version (which runs well.) Two upgrades are included in the update - Lion Recovery Update and Mac OSX Update. Should these be installed separately of together as they are downloaded? Am I doing something wrong? The machine has been continuously updated since OSX Lion came out so I am not lacking currency in the OS prior to this update.

@the hatter: First of all: thanks for your assistance !
What I have is: the MacPro 1.1 (2006) and a MacBookPro (2009).
Inside the MacPro:
(1) Start Disc
(2) 2nd Startdisk backed up by SuperDuper from (1) (without Parallels disk)
(3) Media (backup on TimeCapsule)
(4) TM backup of (1) without Parallels
(5): USB-Cradle with my last SnowLeo system-hard disk.
All tests to boot failed with: disk (1) Recovery HD (it is there!) , disk (2), external disk (5), Lion Install DVD , Recovery HD from a USB-Stick (created on my MBP).
All tests ended with a grey blank screen :-(
I'm German, so my English has limits. What do you mean with:
1. "Pull the bump system drive " ? Should I open my mac and put the old start disk aside ?
(by the way: I have a backup-drive inside the MacPro from this start disk.)
2. "Do a clean install of OS". On which disk ? A new one ?
3. "Put the old working system in FW case". ? FW case ? FW=FireWire ? case? I'm sorry, I do not understand what you mean.
4. "Update and install". What has to be updated ? The new installed Lion ?
5. "Import / Migrate with Setup Assistant or Migration Assistant" ? Can't I migrate from "2nd StartDisk" ?
6. "I am sure there is an uninstaller for Parallels 7 though not whether it can run from another system." I cannot use the uninstaller, as I am not able to boot the Mac :-(
7. The first OS on the MacPro was 10.4.6 (Tiger) I had Leo, SnowLeo and now Lion. So I believe it will be the moment to build a new clean Lion system.

Query about the steps for Weblogic Server Upgrade from 8.1 to 10.3

Hi!
We have planned to upgrade our Weblogic Server from 8.1 to 10.3. Could anyone advise me:
1. How to upgrade the Weblogic Server from 8.1 to 10.3? Can the Weblogic Server 10.3 coexist with the Weblogic Server 8.1 in one physical server?
2. Where can the upgrade software be downloaded?
3. We have a web service currently running under Weblogic Workshop as the Weblogic Server is started via the workshop. Can this web service be run under Weblogic Server 10.3?
4. Are there any foreseeable issues/problems that will happen?
Please kindly help me. Thanks a lot.
Best Regards
May

Download location: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
You can upgrade the domain after you install wls 10.3 using QuickStart.
When we migrated we have moved from windows to linux. We have installed, created domain, created managed servers, configured, etc. from scratch. We didn't face any 'show stopper' issues.

SCOM Gateway Server Upgrade from 2012 SP1 to R2

Hi,
I am upgrading our SCOM environment from 2012 SP1 to R2. But unable to upgrade the Gateway Server. The installation of R2 setup stops with error message: "The operation manager gateway can't be installed on a computer on which the Operation Manager
management server, Operations Console, operational database, web console, agent, System Center Essentials, or System Center Service Manager is already installed."
I checked none of the above component is installed on the gateway server. Please suggest what is the issue?
Regards,
Daya Ram

Hi,
Have you followed the steps below to upgrade a gateway server:
Log on to a computer that hosts the gateway server with an Operations Manager Administrators role account for your Operations Manager management group.
On the Operations Manager media, run Setup.exe.
In the Optional Installations area, click Gateway management server.
On the Welcome to the System Center 2012 R2 Operations Manager Gateway Upgrade Wizard page, click
Next.
On the The wizard is ready to begin gateway upgrade page, click
Upgrade.
On the Completing the System Center 2012 - Operations Manager Gateway Setup wizard page, click
Finish.
You may check below directory:
C:\Program Files\System Center 2012\Operations Manager
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Mac mini wanting to upgrade from 10.5.8 to anything newer for safari to work properly

I have a problem. certain sites are not working because my safari will not support the changes they have made to the website. ei. cannot see anything i want to or update my profiles. I have a mac mini with 10.5.8. and need to upgrade to newer for things to work. these are my specs for my 2009 mac mini...
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version (system): 1.19f2
Serial Number (system): YM7503MPYL1
Hardware UUID: 00000000-0000-1000-8000-0016CBAD8BAD
I dont know what else i need to get it to work. and my mother is having the same problems with hers because her os for her mac mini is a 10.4.4. so i need to get hers upgraded as well for her work. she will have less power as my mac as her mini is older. will it still work or will i need to find her a new computer?

Choose About this Mac from the Apple menu and check the processor.
A PowerPC Mac mini can’t be upgraded past 10.5.8.
For a Core Duo Mac, click here, install the DVD, and run Software Update.
For your Mac mini, upgrade it as if it was a Core Duo Mac, and once done, if desired, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(122228)

Mac OS-X server upgrade from v3.2.1 to v.3.2.2

Similar Messages

Maybe you are looking for