Mac Pro OSX 10.10 can't control volume in iTunes with keyboard
I can't control volume in iTunes with keyboard
Yes nachit, I have the same problem.
I've noticed that when I switch between the output audio devices (i.e. Built in speaker to headphones), the volume control fails.
I've already opened a topic yesterday. At this time, no answer.
We'll wait...
Similar Messages
-
Dear can anyone help me on how I can change my mac pro (OSX Version 10.9.5) language from Spanish to English?
System Preferences > Language & Text > Language.
-
Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)" -
Is it possible to upgrade my Mac Pro OSX 10.7.5 to OSX 10.8?
Is it possible to upgrade my Mac Pro OSX 10.7.5 to OSX 10.8?
Processor 2 x 3 GHz Quad-Core Intel Xeon
Memory 8 GB 667 MHz DDR2 FB-DIMM
Graphics NVIDIA Quadro FX 4500 512 MB
Software Mac OS X Lion 10.7.5 (11G63b)Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against MacPro3,1, which is the earliest Mac Pro that can run Mountain Lion and newer.
(125398) -
Ipad mini not recognised by Mac Pro (OSX 10.6.4)
I have an ipad mini (6.1.3) I have connected it to my Mac Pro (OSX 10.6.4) via the thunderbolt/USB lead supplied. The device is not recognised in the finder or in itunes, though it does charge via this port. Is this an issue with my OS version? My itunes version? Is there a simple fix?
An iPad isn't designed to mount as a drive in Finder, it should only appear in iTunes and (if you have photos on the iPad that were taken with it, copied it to it via camera kit, saved from emails/websites) then it should also appear in iPhoto, Image Capture and Aperture so that you can copy them off.
But I think that you need iTunes 10.7+ to sync an iPad Mini running iOS 6, which I think requires OS X 10.6.8+ -
we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy. -
Mac Pro (2009) RAID Card - Can't create RAID Set
Hi Everyone,
I have a Mac Pro 4,1 (Model 2009) running Mavericks 10.9.2. with the Apple RAID Card installed. I got 4 new SAS Drives (Dell Toshiba MK2001TRKB) which I'm trying to configure into a single RAID5 set.
OS X detects the individual drives and with Disk Utility I can partition and/or format the individual drives. However when I try to create a RAID5 set using RAID Utility, the card won't create the RAID set. Ik keeps on showing the white-blue stripped progress bar. Tried creating a RAID0 or RAID1 with just 2 drives, but the card just doesn't create a RAID set.
Anyone got a clue why this isn't working?
Thanks,
SanderManualy erased all 4 the drives and it worked instantly. System is now initializing the volume :-)
Still a bit strange. All 4 the drivers where brand new. I did some further testing and if I select the partion tab and just create a new partition on each drive, it still doesn't work. I have to select the erase option in Disk Utility and just do a simple erase on each drive in order to be able to create the RAIDset.
Anyway, Thanks for the advise; performance even during initializing is pretty fast. I'm curious to see what kind of performance I get aftet the initialization is completed. -
How to delete picture files ( nikon NeF and jpeg ) with Zero KB size that were downloaded onto mac pro osx vers 10.5.8, 2x2.8 quad core intel Xeon
-- have not been able to move them or move them to trash without crashing Finder ?Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Try trashing them in Safe Mode, reply if that doesn't help. -
I am not able to burn a CD from my Mac pro OSX 10.6.3. how do i download the software . the message i get is no supported software
You need to update your Mac OS X to at least 10.6.8.
Apple menu > Software update. -
Mavericks on mid 2010 MAC Pro really slow. Can I do anything to speed it up?
Mavericks OS X 10.9.2 on mid 2010 MAC Pro really slow. Can I do anything to speed it up?
do a clean install and re-install needed apps, lots of posts where in place upgrades are slow for unknown reasons
-
I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?
The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
Matt -
How do I access Java on my Mac Pro so that I can make sure it's working so that we can view "watch instantly" on Netflix?
There are various browser scripts
1: Java (not needed much at all and highly advised to be turned off in Safari/Firefox preferences due to it's vulnerability)
2: Javascript (if off, needs to be turned on in Safari/Firefox preferences as it's used A LOT)
Note: If your using a NoScript type blocker, then you need to whitelist the site. Or drag a Temp Allow All button to Firefox's Toolbar.
3: Silverlight plug-in (needed for watching Netflix content, it's from Microsoft)
4: Flash (needed for watching a lot of web based content, but requires constant checks to make sure it's current as they have a lot of security issues)
Check your status here, works on all web browsers
http://www.mozilla.org/en-US/plugincheck/ -
I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?
After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.
-
What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel
I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
DavidCurrently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens -
I have some OLD software on my Mac Pro. How do I know if it will work with Snow Leopard? Currently I'm using 10.5.8.
Michael Wasley's link (wikidot) is as accurate as any I can find.
It's still wise to check with the vendors' websites for compliance.
Biggest source of problems seems to be printer and scanner drivers.
Appleworks 6.2.9 works fine in SL under Rosetta (note; Rosetta is installed by default in Leopard - in SL you may have to select it from the optional installations).
Check particularly with Adobe products; some you'd think should work ok suddenly don't.
Maybe you are looking for
-
Can i copy contacts from one apple id to another
I would like to copy my contacts to my family members iphone which is different apple id Can i do that
-
Designed by Photographers... mistake No. 1?
I'm an Aperture fan and I believe that the programs has great potential... but that's about it at this time. While many photographers will appreciate some of the features, many of the key 'processing' features are either not present or burried in dro
-
Pages 09 version 4.0.4 PDF files in emails
Good day to all. Upgraded to latest version, has caused PDF files to act differently. Ie: When exporting a letter as PDF (Export) and then later transferred as an attachment to an email, the whole file (PDF) will open instead of just listing the litt
-
HAS ANYONE HAD A PROBLEM WITH WIRELESS PRINTING ERROR RASTER FILE FAILED
My printer displays error message - opening raster file failed. Has anyone had this happen?
-
Applescript, Illustrator CS5 and Saving as a PDF
Hello, First I'm not sure if this is the best spot to post this but I figure I would start here! I'm a rookie applescripter and can find code and piece it together to get things done. The issue I've recently come across has to do with saving files as