Macbook can't connect via L2TP but can via PPTP. iPhone can connect to both

So I've been banging my head up against the wall for the better part of this morning trying to figure this out. Just as a note, I'm 3000 miles from my house and server, but I do have access to it for the time being via PPTP.
Before I left, I verified that I could connect with L2TP on my iphone's 3G network. I was also able to connect at the airport on my Macbook using L2TP. Sometime overnight something changed, and I can't figure out what. I noticed that my phone dropped it's VPN connection saying something like "the connection to the server dropped unexpectedly" or such. After that, I was unable to connect over L2TP on my macbook or iphone. On a whim I tried connecting over PPTP which worked! But only on my macbook. Again on a whim I tried to connect via L2TP on my iphone, and it worked?! I rinsed, lathered and repeated that process over and over again and confirmed that I could only connect over L2TP on my iPhone after connecting on my macbook over PPTP. Also, on my iphone, if I stored the password it wouldn't authenticate (probably not related).
As of this moment I am connected using L2TP on my iphone for the last hour, using it to successfully stream Pandora across US borders, but can't sustain a PPTP connection on my macbook for longer than 10 mins. And I still can't connect over L2TP. So that said here are the client and server logs (ips, domains and usernames masked....) Server and clients are in different timezones:
*Macbook when trying to connect via L2TP:*
Mon Dec 21 12:30:32 2009 : L2TP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:30:32 2009 : IPSec connection started
Mon Dec 21 12:30:32 2009 : IPSec phase 1 client started
Mon Dec 21 12:30:42 2009 : IPSec connection failed
*Server Log for the above transaction:*
NO RECORD
*Macbook when trying to connect via PPTP:*
Mon Dec 21 12:49:44 2009 : PPTP connecting to server 'nnn.nnn.nnn' (xxx.xxx.xxx.xxx)...
Mon Dec 21 12:49:44 2009 : PPTP connection established.
Mon Dec 21 12:49:45 2009 : Using interface ppp0
Mon Dec 21 12:49:45 2009 : Connect: ppp0 <--> socket[34:17]
Mon Dec 21 12:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 12:49:49 2009 : route_interface: write routing socket failed, File exists. (address xxx.xxx.xxx.0, mask 255.255.255.0, interface ppp0, host 0).
Mon Dec 21 12:49:49 2009 : local IP address xxx.xxx.xxx.233
Mon Dec 21 12:49:49 2009 : remote IP address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : primary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : secondary DNS address xxx.xxx.xxx.109
Mon Dec 21 12:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en1, address: xxx.xxx.xxx.6), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.233, subnet: 255.255.255.0, destination: xxx.xxx.xxx.109).
*Server Log for the above transaction:*
2009-12-21 09:49:44 PST Incoming call... Address given to client = xxx.xxx.xxx.233
Mon Dec 21 09:49:44 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:49:44 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:49:44 2009 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'…
Mon Dec 21 09:49:44 2009 : PPTP connection established.
Mon Dec 21 09:49:44 2009 : using link 1
Mon Dec 21 09:49:44 2009 : Using interface ppp1
Mon Dec 21 09:49:44 2009 : Connect: ppp1 <--> socket[34:17]
Mon Dec 21 09:49:44 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:45 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:49:45 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4b8d229c> <pcomp> <accomp>]
Mon Dec 21 09:49:47 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x206a2bb5> <pcomp> <accomp>]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoReq id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : sent [CHAP Challenge id=0x7f <3b77645a35056d6f176a3d4302524136>, name = "OSXServer.kimnet"]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoReq id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : sent [LCP EchoRep id=0x0 magic=0x206a2bb5]
Mon Dec 21 09:49:48 2009 : rcvd [LCP EchoRep id=0x0 magic=0x4b8d229c]
Mon Dec 21 09:49:48 2009 : rcvd [CHAP Response id=0x7f <51f69894a74fc550cf12b270ceb43da90000000000000000d7a8e304c6080e5d0315a47e9783a4 8ce2ae8fdb00671adc00>, name = "nnnnnnnn"]
Mon Dec 21 09:49:48 2009 : sent [CHAP Success id=0x7f "S=09A448E00B717E032D200EAEFA793E57AF9B9676 M=Access granted"]
Mon Dec 21 09:49:48 2009 : CHAP peer authentication succeeded for nnnnnnnn
Mon Dec 21 09:49:48 2009 : DSAccessControl plugin: User 'nnnnnnnn' authorized for access
Mon Dec 21 09:49:48 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Dec 21 09:49:48 2009 : MPPE 128-bit stateless compression enabled
Mon Dec 21 09:49:48 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:48 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0217:f2ff:fec8:ef86>]
Mon Dec 21 09:49:49 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:49:49 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 17 f2 ff fe c8 ef 86]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:49:49 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:49:49 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.233> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:49:49 2009 : ipcp: up
Mon Dec 21 09:49:49 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : found interface en0 for proxy arp
Mon Dec 21 09:49:49 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:49:49 2009 : remote IP address xxx.xxx.xxx.233
Mon Dec 21 09:49:49 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp1, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.233).
Mon Dec 21 09:49:49 2009 : rcvd [IP data <src addr xxx.xxx.xxx.233> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Mon Dec 21 09:49:49 2009 : sent [IP data <src addr xxx.xxx.xxx.109> <dst addr xxx.xxx.xxx.233> <BOOTP Reply> <type ACK> <server id 0xc0a8016d> <domain name "nnn.nnn.nnn">]
*Server Log for iPhone L2TP login:*
2009-12-21 09:52:38 PST Incoming call... Address given to client = xxx.xxx.xxx.202
Mon Dec 21 09:52:38 2009 : Directory Services Authentication plugin initialized
Mon Dec 21 09:52:38 2009 : Directory Services Authorization plugin initialized
Mon Dec 21 09:52:38 2009 : L2TP incoming call in progress from 'xxx.xxx.xxx.xxx'...
Mon Dec 21 09:52:38 2009 : L2TP received SCCRQ
Mon Dec 21 09:52:38 2009 : L2TP sent SCCRP
Mon Dec 21 09:52:38 2009 : L2TP received SCCCN
Mon Dec 21 09:52:38 2009 : L2TP received ICRQ
Mon Dec 21 09:52:38 2009 : L2TP sent ICRP
Mon Dec 21 09:52:38 2009 : L2TP received ICCN
Mon Dec 21 09:52:38 2009 : L2TP connection established.
Mon Dec 21 09:52:38 2009 : using link 0
Mon Dec 21 09:52:38 2009 : Using interface ppp0
Mon Dec 21 09:52:38 2009 : Connect: ppp0 <--> socket[34:18]
Mon Dec 21 09:52:38 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:38 2009 : lcp_reqci: returning CONFACK.
Mon Dec 21 09:52:38 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x24ff54dc> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x6b3541df> <pcomp> <accomp>]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoReq id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : sent [CHAP Challenge id=0x6d <4322331b3d22406914173d5e0d176c29>, name = "nnn.nnn.nnn"]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoReq id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : sent [LCP EchoRep id=0x0 magic=0x6b3541df]
Mon Dec 21 09:52:39 2009 : rcvd [LCP EchoRep id=0x0 magic=0x24ff54dc]
Mon Dec 21 09:52:39 2009 : rcvd [CHAP Response id=0x6d <f46ecd855c624eef611f02096c87d7650000000000000000f7430743bc328cbca68540408d0103 2e0a60fb95fcc2b83600>, name = "xxxxxxx"]
Mon Dec 21 09:52:39 2009 : sent [CHAP Success id=0x6d "S=0A046B9F1C59085076A8F2B736929E19391BDC4B M=Access granted"]
Mon Dec 21 09:52:39 2009 : CHAP peer authentication succeeded for xxxxxxx
Mon Dec 21 09:52:39 2009 : DSAccessControl plugin: User 'xxxxxx' authorized for access
Mon Dec 21 09:52:39 2009 : sent [IPCP ConfReq id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:39 2009 : sent [ACSCP ConfReq id=0x1]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-NAK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfNak id=0x1 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::8948:cf2a:8334:7077>]
Mon Dec 21 09:52:40 2009 : Unsupported protocol 0x8057 received
Mon Dec 21 09:52:40 2009 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 89 48 cf 2a 83 34 70 77]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfAck id=0x1 <addr xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
Mon Dec 21 09:52:40 2009 : rcvd [IPCP ConfReq id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: returning Configure-ACK
Mon Dec 21 09:52:40 2009 : sent [IPCP ConfAck id=0x2 <addr xxx.xxx.xxx.202> <ms-dns1 xxx.xxx.xxx.109> <ms-dns3 xxx.xxx.xxx.109>]
Mon Dec 21 09:52:40 2009 : ipcp: up
Mon Dec 21 09:52:40 2009 : pptpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).
Mon Dec 21 09:52:40 2009 : found interface en0 for proxy arp
Mon Dec 21 09:52:40 2009 : local IP address xxx.xxx.xxx.109
Mon Dec 21 09:52:40 2009 : remote IP address xxx.xxx.xxx.202
Mon Dec 21 09:52:40 2009 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: xxx.xxx.xxx.109), current interface setting (name: ppp0, family: PPP, address: xxx.xxx.xxx.109, subnet: 255.255.255.0, destination: xxx.xxx.xxx.202).

I'm having similar issues but not much luck getting any answers. I made a similar post here - maybe something in there will help you.
One thing I have been able to pinpoint is that the MobileMe Back To My Mac service was causing quite a few issues with being able to connect to the VPN. Once I turn off the service, connection seems to work fine. Although, once I'm connected, I cannot access file sharing. Still waiting for some answers on that.

Similar Messages

  • HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have gmail and hotmail account on my macbook. In gmail I can visualize all the mailboxes but in hotmail i only can see the inbox ¿how can I visualize the rest of the mailboxes? thanks

    I have gmail and hotmail account on my macbook.
    In gmail I can visualize all the mailboxes but in hotmail i only can see the inbox ¿how can I visualize the rest of the mailboxes?
    I have the same problem with my ipad; the solution would be the same?
    thanks

    Hello Sophie59
    You should be able to see two different tabs when setting up the email if you go to Other > Add Mail Account. Once you enter in the email address and password, you should be at the next screen to provide more details about the email as far as incoming and outgoing servers and at the top there will be a blue section to add it in as a POP or IMAP email account. Check out the article below for further troubleshooting and emails setup options.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    iOS: Adding an email account
    http://support.apple.com/kb/ht4810
    Regards,
    -Norm G.

  • After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

    After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

    Try "Pacifist"!
    Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

  • Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help? KC

    Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help?
    Kin Chi

    I get in now with the following procedures taken:
    1. Reset network as suggested in Apple app.
    2. In the wifi connection, instead click in the user name as shown in the screen, I click Others and re-type the user name as appeared before. In the security, instead of none, I click WEP. It will then prompt you to put in password. I then put in password as I know for that user name again.
    Then, it joined the wifi..
    Hope this can help someone who get this problem.
    Kin Chi

  • I have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz

    i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz

    Sounds like you broke it.

  • Do you need to use an email as an apple ID?    We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also for th

    Do you need to use an email as an apple ID?    We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also I wanted to know because for the game center we wanted to keep track of each individual not just o e account.  DID I MAKE SENSE

    Figured it out. Thanks.

  • Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

  • I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

    I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

    There is a problem with iMessage with what Apple says is a small number of iPhones and they are working on a fix. In the meantime try this:
    1. Settings > Messages > iMessage = Off
    2. Settings > FaceTime > FaceTime = Off
    3. Settings > General > Reset > Reset Network Settings
    4. Wait for the iPhone to Reboot
    5. Settings > FaceTime > FaceTime = On
    6. Settings > Messages > iMessage = On
    You may have to repeat the steps a couple of times.
      - with thanks to @deggie

  • HT1386 During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect

    During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
    Please how do i reactivate iPhone?

    Hello DadiPrince,
    The following article contains information beneficial to getting your iPhone back into normal working order.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Resolution
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
    All the best,
    Allen

  • I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it.

    I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it. How do I fix this?

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

    Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

    hello, this is a displaying flaw caused the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
    http://service.mcafee.com/faqdocument.aspx?id=TS100162
    https://community.mcafee.com/thread/76071

  • A website will open via wifi but not via 3G. Is this a setting on the iPad?

    A website will open via wifi but not via 3G. Is this a setting on the iPad?

    Probably not.  How's your 3G connection?  I ask because I've had issues when the 3G connection isn't strong.  Same with WiFi too, actually.

  • Where can I find a list of file types that Iphone can open?

    where can I find a list of file types that Iphone can open please?

    http://www.apple.com/iphone/specs.html
    Viewable document types: .jpg, .tiff, .gif (images); .doc and .docx (Microsoft Word); .htm and .html (web pages); .key (Keynote); .numbers (Numbers); .pages (Pages); .pdf (Preview and Adobe Acrobat); .ppt and .pptx (Microsoft PowerPoint); .txt (text); .rtf (rich text format); .vcf (contact information); .xls and .xlsx (Microsoft Excel)
    TV and video
    * Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    * Support for 1024 by 768 pixels with Dock Connector to VGA Adapter; 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately)
    Message was edited by: DaVBMan

  • My phone just got repaired but i allowed for my niece to play with it but now its say iphone disabled connect to itunes what do i do

    my phone just got repaired but i allowed for my niece to play with it but now its say iphone disabled connect to itunes what do i do

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...

  • HT4583 someone stole my iphone today and i was wondering if it can be tracked or how the thing in the iphone can be deleted

    someone stole my iphone today and i was wondering if it can be tracked or how the thing in the iphone can be deleted

    What To Do If Your iDevice Is Lost Or Stolen
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in Toronto delta Chelsea hotel downtown an I am not able to track it. Please help! [email protected], has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Maybe you are looking for

  • Cannot open file, Photoshop is not compatible with this version of photoshop. 2 weeks

    This has been a problem for almost 2 weeks now. Cant save any work in photoshop, files are unretrievable once closed. I get the same error message. I spent all of last week online with Adobe Tech support, screen sharing conference etc, now iMac isnt

  • Seagate HD crashing? What to do? XP Pro.

    Help. My Seagate HD made an aweful racket this afternoon when I powered it on. It was also very stuborn in completing the quick launch bar and completely loading the OS. I shut down and put my PC on its side and opened the case and re-started. Much b

  • LMS 4.2 Disk Space issue

    Hi I am getting alerts showing that I am out of disk space in the /var directory on my LMS 4.2.1 server.  The offending file seems to be a tmp_000000 in /var/adm/CSCOpx/files/.SQLAnywhere/upmdbengine/tmp which is > 50Gb in size.  Can anyone tell me :

  • How do i import my actions from photoshop cc to phhotoshop cc 14?

    ?

  • Period work schedule error

    Hi Experts, While uploading data in PA30 for infotype 2006, for few employees i am getting error as " Generate period work schedule G2DH for 2/M3/01 in 01/2011" ....can you please tell me why this error is coming and is there any setting required for