MacBook died. Went to plug it up and power it back on, and it made an odd beeping sound. It failed to power up, and the light stays constant and doesn't blink.

MacBook died. Went to plug it up and power it back on, and it made an odd beeping sound. It failed to power up, and the light stays constant and doesn't blink. i unplugged it to wait for the light to turn off, which it did after a few minutes, but when I plug it back up to try again, the light comes on and stays on, but it won't power back up. I've also tried holding down the power button for up to 30 seconds and it doesn't do anything. Any tips or hopefully answers to this issue?

Hi. You might have a memory problem. With one or more of your ram being bad. If this is so you can try removing the ram one at a time and try to restart . You can also switch ram slots to make sure ifs not the ram slot. Before you do this try a pram reset. Command/Option/P/R holding down these keys while starting up for three chimes. Also a SMC reset.http://support.apple.com/en-us/HT201295    http://support.apple.com/en-us/HT202768

Similar Messages

  • My Macbook is not playing sound unless i have headphones in. The light in the headphone plug stays on even when they are not plugged in. How can i fix this?

    My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?

    You might need to clean the headphone port (I was in the same situation and this worked for me).  Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in.  After cleaning the issue was resolved.

  • My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge. Also it will not stay on or turn on if I unplug it from the outlet, anyone have any idea

    My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge on any outlet. Also it will not start when it is unplugged when my battery is at 50%. It also will shut down immediately if I unplug it from the charger, even though it says it isnt being charged by it. Can anyone help with this problem?

    So you have the 13" aluminum notebook that just says "MacBook" on the display, correct?
    You can get a new battery for $100 from Other World Computing here.
    Alternatively, you can get one through Apple for $130 here.
    I personally would go through OWC - they're a highly-recommended third party for these kinds of parts and their batteries work just as well as Apple's.
    ~Lyssa

  • The light on my time capsule keeps blinking yellow. ! mark in toolbar time capsule and it says it was unable to finish backup because back up disk couldn't be found but it also says last back up was successful.

    The light on my time capsule keeps blinking yellow. ! mark in toolbar time capsule and it says it was unable to finish backup because back up disk couldn't be found but it also says last back up was successful.

    Hi jon88906,
    If you are seeing a flashing amber light on your Time Capsule, you may find the following articles helpful:
    AirPort base stations: About AirPort base station status lights (LED)
    http://support.apple.com/kb/ht4600
    Wi-Fi base station: Understanding and resolving a blinking amber status light
    http://support.apple.com/kb/ts1589
    If you are still seeing an alert message about Time Machine being unable to find your backup disk, then this article may be useful as well:
    OS X Mavericks: If Time Machine can’t find your backup disk
    http://support.apple.com/kb/PH14170
    Regards,
    - Brenden

  • My macbook pro automatically goes into safe mode and doesn't start. I use mavericks.  what to do? ?

    my macbook pro automatically goes into safe mode and doesn't start. I use mavericks. What to do??

    Can you boot into your Recovery partition (hold down the command and R keys whilst booting)?
    Call back - you'll be able to connect to this forum from Safari whilst in Recovery.
    Clinton

  • Satellite P10 PSP10E shutdown and the light stays on

    Hello,
    I'm having a few troubles with my old (2004) Satellite P10 PSP10E-0SCM7-FR
    One day it simply shut down (as if out of power, no BSOD) and the power button as well as the led for the WIFI and CD/DVD stay on.
    Most of the time I cannot turn it back on as the power buton still is on. (Power button, WIFI and CD/DVD are on).
    I've tried to take the battery out and unplug the computer for at least 30mm
    I've tried to press the start button for a while (a minute) then unplug everyting (Power cord + battery) for at least 30 mn before to turn it back on
    I've reinitialzed the computer using therecovery CD provided with the computer
    I've removed the heatsink, cleaned it as well as the fan then put back some new thermal grease
    I've changed the memory
    Yet I still have the same problem, for some unknown reason, the computer simply shutdown and the light stays on. On occasion, the power light do go off, and I'm able to start the computer again. But I'm unable to understand what makes the computer shut itself down, or when that happens, what makes turns the power light off and make it possible to start the computer again.
    Any idea of what's going on ?
    Could the power button and light being turned on be an error message?
    If so, what does it means ?
    Any help is much appreciated. Thanks !
    Damien
    the lights stay on even when taking the battery off and unpliging it to a while (30mm to an hour)

    Hi PauPau and thanks for your help !
    I'm a bit disapointed, I was hoping it was something that could fairly easily be fixed.
    :o|
    Since the computer is about 10 years old, I'll certainly won't have it fixed as I'm affraid it would cost way too much. For a ltitle while i thought about getting another used P10 in order to get some spare parts to fix my computer. But I guess this is going to be much too complicated for me and might cost me a lot with no inssurance that I'll ever get it fixed.
    I guess I should better save some money and buy a new one.
    I'll stay subscribed to this thread... if anyone has an idea on what could be the problem, please post here. Thanks.
    Damien

  • The light on my apple tv is blinking furiously.  i've held down the menu button, plugged and unplugged it, and just tried restoring it via micro usb.  but the restore downloads then says it can't finish because it can't write to the disc.  lost lost

    how do i get the light on my apple tv to stop blinking?  have tried all the recommended methods, including holding down "menu" on remote, plugging and unplugging etc.  when i try to restore via itunes it downloads then when it's done says it can't write to disc.

    Hi lostinmedford,
    Welcome to the Apple Support Communities!
    I understand that the light is quickly flashing on your Apple TV and you are unable to restore it. According to the attached article, you are working through the correct steps by trying to reset and restore the Apple TV. In this situation, if the restore did not resolve the issue, it may be necessary to have the Apple TV evaluated for service by using the link in the attached article. 
    Apple TV: About the status light - Apple Support
    Flashes quickly
    Having issues. Try restarting or waking your Apple TV. If your Apple TV does not start up properly, you might need to reset the Apple TV or restore it to factory settings. See Apple TV (2nd and 3rd generation): Restoring your Apple TV. If this does not resolve the issue, refer to the Service FAQ for additional assistance.
    Best regards,
    Joe

  • The Lamp of My Display Doesn't Blink Anymore.

    I use the PowerMac G5 Quad and the 20-Inch Apple Cinema display. My display lights up while the PowerMac sleep or shut down, but the lamp of the display doesn't blink anymore. Does anyone have any ideas? Please, help me.

    Thank you for your reply.
    I had been using it without connecting the USB and Firewire cables, but it had worked normally for several months. I have connected both of the cables to the Mac, and checked the checkbox of "Puts the system to sleep or wakes it" in the Display options in System Preferences, and now it blinks when it is sleeping.
    But... it is a little strange compared to before... Do you think this is normal?
    http://homepage.mac.com/applmc/display.mov
    However, it doesn't blink in any of the following cases.
    — When I check the check box of "Turn the display on and off" in the Display options in System Preferences, and make it sleep, the lamp of the display doesn't blink, but it lights up.
    — When I check the check box of "Does nothing" in the Display options in System Preferences, and make it sleep, the lamp of the display doesn't blink, but it lights up.
    It's very weird. Maybe this is a hardware problem?

  • The light on my apple tv is blinking white constantly  what is causing that?

    My Apple TV light on the front of Apple TV is constatly blinking white.  What is causing that?  It just started doing that today (1/22/2013).
    HELP

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.
    If when you choose restore you get a message that the device cannot be found, download the file below
    Apple TV Software Restore 5.1.1 (2nd generation)
    Apple TV Software Restore 5.1.1 (3rd generation)
    Then hold down the option key while choosing restore and select the downloaded file when prompted.

  • The display on my iPod is extra large and I am have no idea why.  I tried the HOME button and the power button at the same time but that doesn't work.  I can't even enter my code to unlock it because I cannot scroll the HUGE display!  Any ideas??

    The display on my iPod Touch is HUGE and I have no idea why.  I tried the HOME button and power button at the same time.....no help.  I cannot enter my unlock code because I can't scroll without entering a wrong number!  HELP!!

    Using three fingers, double-tap the screen.
    http://support.apple.com/kb/TS3129

  • My Macbook died while I was using it, and after restarting I can no longer open FireFox. Now when I try to open it, it hangs. Uninstalling/reinstalling don't work, opening it in safe mode makes no difference. How do I fix this?

    FF bounces, then immediately freezes up. Must force quit. Never had any problems before.

    By the way, when I hit the first URL in your post, I get a warning that the certificate is only valid for '''www.'''vitalityforlife'''.'''com. If I add www into the URL, it loads normally.
    https://www.vitalityforlife.com/melaleuca/guests/login.asp
    Naturally I can't actually log in, but does that make any difference for you?
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies --before trying to log in. View a page on the site, and then use either of these:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • HT1218 Time machine power on making 5x blip sound -. and the light stays amber! What does this mean?

    Appreciate helps with the above. The blip sound comes on upon restarting for the time machine stops backup my iMac (OS X). Many thanks in advance.

    Both the sound and the steady amber status LED could be indicating that the internal hard drive in your Time Capsule may have failed or is about to fail.
    I would recommend taking it to your local Apple Store to have them confirm. If you purchased it with an Apple computer it may still be under warranty.
    If not under warranty, the other option is to temporarily remove the hard drive, place it into a drive caddy and connect it to your Mac. Then you can use the native Disk Utility or another similar utility of your choosing to fully test the disk. You may find that you can revive it via this method. If successful you can then reinstall the drive in your Time Capsule.

  • HPG72-250US Power Light Blinks, Caps Lock Light Stays On

    So I have been having some problems with my computer, an HP G72-250US, that I bought a few years ago.  Namely, the screen would get black and white lines on it and freeze: Here's a pic.   What the screen looks like. 
    A friend of mine told me that it could be a problem with the fan, so I decided I would try to take it apart.  After some success, I noticed the fan wasn't clogged or anything, so I put it back together.  When I did, the power button only turns on for a half a second, then shuts off.  It repeats this over and over again.  I noticed that the Caps Lock light stays on.  Doesn't blink, doesn't do anything. 
    I looked around online (using my wifes computer) and all I could find was the HP LED error codes, which mention the Caps Lock or Number Lock light blinking, but nothing about the Power Button Light.  Could it be the same issue, a CPU failure? 
    Thanks for any help!
    UPDATE: 
    So after watching my computer for a bit, the Caps Lock Light DOES do something.  I hope I can say this correctly so everyone can understand it:
    The Caps Lock Light is on, the Power Button Light is off.  For the split second or two that the Power Button Light comes on, the Caps Lock Light goes out.  The LAN connector also lights up when the Power Button Light is on.  Everything is pointing to it blinking once, so I'm still thinking its a CPU problem.  Any thoughts?

    EduarddeKam wrote:
    It is not a real problem in the sense that is does not hinder me in my computer use, but it is something strange.
    When a turn the computer off, the caps lock light on my keyboard turns on, only to turn off after I strat my computer.
    You might consider zapping your PRAM.

  • Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACB

    Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..

    I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!

  • MacBook Pro Mid-2010 Intermittent Shut-Down and Fuzzy Screen

    Hi,
    My MacBook Pro Mid-2010 has been having some problems recently. Hope someone will be able to help me with this. Below are the symptoms that has been showing.
    Symptoms:
    1. Intermittent Shutdown
    2. Screen going fuzzy (when I give it a slight tap it will be fine but everything just hangs)
    3. 3 beep sound
    4. Can't start up (The sleep light will just stay on but nothing appears. I have to force shutdown and try starting it again.)
    I have recently done a clean install of Yosemite but the problem is still occuring.
    I also took it down to Singapore Apple Service Centre to try to get the problem fixed. But the initial tests shows that all the components in the Mac is working fine. I will need to pay for a full test as my Mac is out of warranty hence I did not send it in.
    Below is a copy of the recent log after it shut down by itself.
    Appreciate if someone can help me with this!
    Thank you!
    Regards,
    Kai Yuan
    Anonymous UUID:       730F95C2-DB71-659C-6654-559BD5396C64
    Sun Nov 16 20:38:03 2014
    *** Panic Report ***
    panic(cpu 2 caller 0xffffff801c01e80a): Kernel trap at 0xffffff801c35a806, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x00000001069a1000, CR3: 0x000000001e2fc001, CR4: 0x00000000000226e0
    RAX: 0xd7f3000000000000, RBX: 0xffffff802c1370f0, RCX: 0x0000000025000000, RDX: 0x0000000000000000
    RSP: 0xffffff80b28cbd00, RBP: 0xffffff80b28cbd20, RSI: 0x0000000000000002, RDI: 0xffffff802c122528
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0x0000000000002000, R11: 0x0000000000000022
    R12: 0xffffff802c1370f0, R13: 0x0000000000000000, R14: 0xffffff80b28cbe18, R15: 0xffffff802c122528
    RFL: 0x0000000000010286, RIP: 0xffffff801c35a806, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00000001069a1000, Error code: 0x0000000000000000, Fault CPU: 0x2
    mp = 0xffffff80278dbc00, phys = 0x1e649c00, prev (0x7: 0x1bd13000-0x1be00000)
    vp = 0xffffff80278dbc00, phys = 0x11b8d40f0, prev (0xb: 0xffec4000-0xffee8000)
    0xffffff80278da000: aAAAAGsAAABwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABAICA gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAACAgB4fCQcgAACACAAAACETGg2GkqKTgoIaPgACAgACKggAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACAgEAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAG1hcCBhdXRvX2hvbQjXQCeA////AAACAP8PAAAAAAA h/////z8AAAAA0BwoQNutKWNUYjgAno0ngP///wCyjSfQsTie4NxlHID///8A360pgP///yDdrSmA/// /QN2tKYD///9QqI0nCABQBAAACAAABAAAAAIAAAEAAC0VAAAAYXV0b2ZzAAAvbmV0bWFwIC1ob3PAzAA A4A4O7pDu3g5lgAAgIASwOYAPIAAB/P83YNANAAAA
    0xffffff80278db000: eAAAAIEAAACNAAAAAAAAAAAAAAAAAAAAAACAgB4fCQcgAACACAAAACETGgmGkqLTgoMZP0QBMwACKQQ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AADAwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAwMAfH4mHLQAGwAgAAAAhExoNidMiE4aPKn9oAuoAAhoAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAIjyRyeA////AAACAP8PAAAAAAAh/////z8AAAAAUa0 nIN2tKYD///+4V2E4AKiNJ4D///8AvI0nMAlmHCDcZRyA////oEWYJ9CylS9Qso0nABAQBAAQEADoMRw nZGV2Zi9kZXb/DwAAACLnt//////4LgoAAAAAIT8AAACA4pEnsESYJynJ1hsgU28cGkkAABjeZhxg22U c8IBFKBBxEyxgS5gnYLyNJwDQgAQAAV2AABAAAAAAEAAAdkIH///LBv8FywYBcHcABAAAAREAAABoZnM AzAAADA7uDuDu7m7jAAAAMMALDswMAHDgDg5u7u7uPu7+DgAGIAAIAgFsDjgDCAAT/wMODWACaBZsTjA HIAAIAgFgKj+bAz4AAgD4P4CDBwH+vQAA
    0xffffff80278dc000: WQAAAF0AAABkAAAAAAAAAAAAAAAAAAAAACAgIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwgIAaHxoHLQAGQAoRAAAAABIDABAAAIAAFn0AAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAHh8JByAAAIAAAAAAAAAiAS9kZXYvZGlzazEAAAjInieA////AAAAAgABAAAAAEA AAwAAACHdCAAAAAAhMEyYJwMAAADA4pEnQMaNJwAQAAAAAAIA/w8AAAAAACH/////wIx3JwIAAAAAAAA A4ADmDk7uBM4AAAzsAIIQAArYeiP/Ax4AAvwPOFCCCRAgAAgCAQAOAAAA
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80abe1de10 : 0xffffff801bf3a811
    0xffffff80abe1de90 : 0xffffff801c01e80a
    0xffffff80abe1e050 : 0xffffff801c03a443
    0xffffff80abe1e070 : 0xffffff801c35a806
    0xffffff80b28cbd20 : 0xffffff801c142c3b
    0xffffff80b28cbdd0 : 0xffffff801c357da7
    0xffffff80b28cbeb0 : 0xffffff801c15c86b
    0xffffff80b28cbdd0 : 0xffffff801c146ef4
    0xffffff80b28cbf40 : 0xffffff801c1510f7
    0xffffff80b28cbf50 : 0xffffff801c44dcb2
    0xffffff80b28cbfb0 : 0xffffff801c03ac46
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x000000001bc00000
    Kernel text base: 0xffffff801be00000
    __HIB  text base: 0xffffff801bd00000
    System model name: MacBookPro6,2  Mac-F22586C8)
    System uptime in nanoseconds: 694617714744
    last loaded kext at 41929989267: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f9e43c000, size 32768)
    last unloaded kext at 112897414739: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9d344000, size 65536)
    loaded kexts:
    com.apple.driver.AudioAUUC 1.70
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AGPM 100.14.37
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
    com.apple.driver.AppleOSXWatchdog 1
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleMikeyDriver 266.5
    com.apple.driver.AppleHDA 266.5
    com.apple.driver.AppleUpstreamUserClient 3.6.1
    com.apple.driver.AppleIntelHDGraphics 10.0.0
    com.apple.GeForceTesla 10.0.0
    com.apple.iokit.IOUserEthernet 1.0.1
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleMuxControl 3.7.21
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
    com.apple.driver.AppleMCCSControl 1.2.10
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleHV 1
    com.apple.driver.AppleLPC 1.7.3
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleUSBCardReader 3.5.0
    com.apple.driver.AppleIRController 327.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.7.0
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.5
    com.apple.driver.AirPort.Brcm4331 800.20.24
    com.apple.driver.AppleUSBHub 705.4.1
    com.apple.driver.AppleFWOHCI 5.5.2
    com.apple.driver.AppleAHCIPort 3.0.7
    com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
    com.apple.driver.AppleUSBEHCI 705.4.14
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 3.1
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 3.1
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
    com.apple.nke.applicationfirewall 161
    com.apple.security.quarantine 3
    com.apple.security.TMSafetyNet 8
    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
    com.apple.AppleGraphicsDeviceControl 3.7.21
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 11
    com.apple.driver.DspFuncLib 266.5
    com.apple.kext.OSvKernDSPLib 1.15
    com.apple.iokit.IOAudioFamily 200.6
    com.apple.vecLib.kext 1.2.0
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
    com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
    com.apple.driver.AppleBacklightExpert 1.1.0 >AppleGraphicsControl 3.7.21
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleSMBusController 1.0.13d1
    com.apple.iokit.IOSurface 97
    com.apple.driver.AppleHDAController 266.5
    com.apple.iokit.IOHDAFamily 266.5
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.iokit.IOBluetoothFamily 4.3.0f10
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.driver.AppleSMC 3.1.9
    com.apple.driver.AppleUSBMultitouch 245.2
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
    com.apple.iokit.IOUSBMassStorageClass 3.7.0
    com.apple.iokit.IOUSBHIDDriver 705.4.0
    com.apple.driver.CoreStorage 471
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.driver.AppleUSBMergeNub 705.4.0
    com.apple.driver.AppleUSBComposite 705.4.9
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
    com.apple.iokit.IO80211Family 700.52
    com.apple.iokit.IOFireWireFamily 4.5.6
    com.apple.iokit.IOAHCIFamily 2.7.0
    com.apple.iokit.IOEthernetAVBController 1.0.3b3
    com.apple.driver.mDNSOffloadUserClient 1.0.1b8
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBFamily 705.4.14
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 300.0
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.AppleMobileFileIntegrity 1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 389.1
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily 31
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.Libm 1
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Hub
    USB Device: IR Receiver
    USB Device: Built-in iSight
    Thunderbolt Bus:

    I just had the same problem! Just installed Mavericks a couple of days ago but everything was running perfectly till just a couple of minutes ago watching netflix and working on Dreamweaver my macbook just shutdown. I had to Turn it back on and in the first try it shutdown immediatelly again, then i tried for second time and as soon as i got back into my account a bunch of programs start sending erros as my clock was set to a different date. My battery seems to be fine, i even check the report in the system preferences, it had 50% of battery and was plugged in so i am guessing that is not the problem.
    Here the report:
    Charge Information:
      Charge Remaining (mAh):          3356
      Fully Charged:          No
      Charging:          Yes
      Full Charge Capacity (mAh):          6626
      Health Information:
      Cycle Count:          367
      Condition:          Normal
    I had to have my motherboard replaced last year as my macbook its a 15 inch Mid 2010 so i took it to Mac Store.. they didnt charge me for anything as it is a problem that Apple acknowledge the problem was in their side. I am just hoping i dont have to deal with this again.

Maybe you are looking for

  • Problem installing Mac OSX on my new MacBook hard drive...

    Hi, i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o) i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to

  • Acrobat 9 Pro Merge Files Into Single PDF

    Just wanted to know if there's a way on Acrobat 9 Pro,i can select a folder using Merge Files Into Single PDF and have it merge each of the subfolders in the folder into separate single PDFs and have then retain the names of their corresponding subfo

  • How well would the new 13" Macbook Pro Retina handle HD video editing, in say Adobe Premier?

    Hi there. I'm buying a new Macbook Pro and would like to know how well the different specs would handle editing HD videos from a GoPro. I've mostly been filming in 720 because my current white macbook (2008) is dying, but wouldnt mind filming in 1080

  • Command c shortcut has stopped working

    Hi, my command c shortcut has stopped working on my macbook pro. Each letter still works individually however the shortcut no longer does. Could you please tell me how to fix this?

  • Missing images in keynote presentations

    I have a number of image rich and weighty presentations. I have a problem in that when i open some of the presentations, each time i open them they seem to loose some images, that is, the images are replaced by a grey box with a cross through it and