The light on my time capsule keeps blinking yellow. ! mark in toolbar time capsule and it says it was unable to finish backup because back up disk couldn't be found but it also says last back up was successful.
The light on my time capsule keeps blinking yellow. ! mark in toolbar time capsule and it says it was unable to finish backup because back up disk couldn't be found but it also says last back up was successful.
Hi jon88906,
If you are seeing a flashing amber light on your Time Capsule, you may find the following articles helpful:
AirPort base stations: About AirPort base station status lights (LED)
http://support.apple.com/kb/ht4600
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/ts1589
If you are still seeing an alert message about Time Machine being unable to find your backup disk, then this article may be useful as well:
OS X Mavericks: If Time Machine can’t find your backup disk
http://support.apple.com/kb/PH14170
Regards,
- Brenden
Similar Messages
-
I cannot backup my iPhone 4 to iTunes because it says the device has been disconnected during "Step 5" (syncing purchases) but my phone is still connected. iTunes is up to date, I don't want to install iOS 6.0.1 until I backup my phone (when I installed iOS 6, I lost everything and had to restore to previous backup. Would hate to not have a more current backup and lose everything again). I have tried uninstalling and reinstalling iTunes and still the same problem. Please help!
You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.
-
My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.
Hi there owain11,
It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information.
Resolve iOS update and restore errors
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
-Griff W. -
I am unable to delete the last backup from icloud, i checked my all device setting but it still say "cannot delete icloud this time because it is in use,"Please tell me what should i do
It still didn't work...
Within this commonfiles\apple folder, there is only one folder, labeled "Internet Services." Within this folder, there are 6 folders, labeled:
APLZOD.resources
BookmarkDAV_client.resources
CoreDAV.resources
iCloud.resources
iCloudServices.resources
ShellStreams.resources
Within all but CoreDAV and BookmarkDAV_client, there are multiple different folders, all labeled starting with a two letter (acronym I believe, for different languages) then .lproj (for example, a folder is labeled "ar.lproj".
In each of the folders of APLZOD.resources, there is a file labeled "APLZODlocalized.dll."
In all of the folders containing the multiple .lproj folders, there are likewise "name"localized.dll files contained.
In the BookmarkDAV_client and Core DAV folders, they each contain only one file, "Info.plist"
I attempted to delete all of these files, and still, the FileAssassin could not delete them. I unlocked one of them for instance, and I tried to delete the file myself (thru windows explorer and just clicking delete), and I still had the same issue of coming eventually to the window requesting me to "try again" to have permission.
What can I do?? I'd like to avoid Unlocker, but if it really is a reliable and SAFE program, and someone knows a SAFE place to download it from, I'd appreciate it very much so!!
thanks!! -
My laptop says it is connected to our wifi but it also says alert: you are not connected to the internet! Does anyone know how I can fix this/has it happened to anyone? Thanks
This usually indicates a problem with your router or cable modem, your ISP's service or cabling outside your house. First thing I'd try is rebooting the router/cable modem (turn it off, wait 1 minute, then turn it back on).
-
Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Crishello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej. -
Hi
I have 1 rootCA and 1 subordinate CA. I removed one of the locations to publish CRL and after that the ADCS service can't start. I get the warning first:
Revocation status for a certificate in the chain for CA certificate 2 for siu-SRVDC01-CA could not be verified because a server is currently unavailable. The revocation function was unable to check revocation because the revocation server was offline.
0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
And then the error:
Active Directory Certificate Services did not start: Could not load or verify the current CA certificate. siu-SRVDC01-CA The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
I've read many threads with similar problems but I can't find the solution. The CDP is online. I've run "certutil -url cert.cer" to verify the CDP and AIA and everything is fine. But the service is still not starting.
See this command too:
C:\>certutil -verify -urlfetch subCADC01.cer
Issuer:
CN=siu-SRVDC02-CA
DC=siu
DC=domain
Name Hash(sha1): 152a7c43f186d9179c1c3256d3a1a0af4a9df892
Name Hash(md5): b409e417a38bbe04b5800512bd94efac
Subject:
CN=siu-SRVDC01-CA
DC=siu
DC=domain
Name Hash(sha1): 5ee421b84c3b18ff134cf2e42226853d78d3409b
Name Hash(md5): e1a454692361733e45dad374dc14cae3
Cert Serial Number: 1e0000022c707c76c0a27b315700000000022c
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 1 Hours, 2 Minutes, 16 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 1 Hours, 2 Minutes, 16 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
NotBefore: 19.03.2015 11:18
NotAfter: 19.03.2017 11:28
Subject: CN=siu-SRVDC01-CA, DC=siu, DC=domain
Serial: 1e0000022c707c76c0a27b315700000000022c
Template: SubCA
a1a8a95464c5b586da6e9b304142d59fc5a22ae0
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] http://wwwca/CertEnroll/srvdc02.siu.domain_siu-SRVDC02-CA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (26)" Time: 0
[0.0] http://sharepoint.siu.no:8088/siu-SRVDC02-CA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 26:
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
ThisUpdate: 19.03.2015 11:10
NextUpdate: 15.09.2015 23:30
e2ee543a68214f9b99dda2e9f58b1ddfc34429d1
CertContext[0][1]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
NotBefore: 23.09.2011 13:00
NotAfter: 23.09.2021 13:10
Subject: CN=siu-SRVDC02-CA, DC=siu, DC=domain
Serial: 60fc459ebdefa5b646a081b0c21c259d
4ea8bb95b0038c69a83c939e8a54f892cd0b5056
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Exclude leaf cert:
691f7e42f5c4a86d03b7225bf7303369ef6dcc7e
Full chain:
17e5b9477a1736c33dc0ff245e7b06de5b958c4c
Verified Issuance Policies: None
Verified Application Policies: All
Cert is a CA certificate
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
Any clue?It looks like it is trying to get the CRL using LDAP. It is quite strange since no ldap entry is on the subordinate CA,
only an HTTP address:
<CertificateRevocationList location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?certificateRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="DEEB557897A9FEA217DF83D95BF24CA54051B1CF.crl" issuerName="siu-SRVDC02-CA" />
<CertificateRevocationList deltaCRL="true" location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?deltaRevocationList?base?objectClass=cRLDistributionPoint"
I have checked that object using adsi Edit and the permissions seem ok. Also there is a value on both attributes: certificateRevocationList and deltaRevocationList.
This problem happened after I removed the LDAP entry for the "CRL Distribution point" from the sub CA properties. Should I add back the LDAP entry?
Log Name: Microsoft-Windows-CAPI2/Operational
Source: Microsoft-Windows-CAPI2
Date: 19.03.2015 14:42:07
Event ID: 11
Task Category: Build Chain
Level: Error
Keywords: Path Discovery,Path Validation
User: SYSTEM
Computer: srvdc01.siu.domain
Description:
For more details for this event, please refer to the "Details" section
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" />
<EventID>11</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>11</Task>
<Opcode>2</Opcode>
<Keywords>0x4000000000000003</Keywords>
<TimeCreated SystemTime="2015-03-19T13:42:07.481533500Z" />
<EventRecordID>131</EventRecordID>
<Correlation />
<Execution ProcessID="6288" ThreadID="5472" />
<Channel>Microsoft-Windows-CAPI2/Operational</Channel>
<Computer>srvdc01.siu.domain</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<CertGetCertificateChain>
<Certificate fileRef="E02AA2C59FD54241309B6EDA86B5C56454A9A8A1.cer" subjectName="siu-SRVDC01-CA" />
<ExtendedKeyUsage />
<Flags value="40000000" CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT="true" />
<ChainEngineInfo context="machine" />
<CertificateChain chainRef="{60B61582-1C3C-4B58-AE8C-70278ADEE402}" revocationFreshnessTime="P2DT21H13M20S">
<TrustStatus>
<ErrorStatus value="1000040" CERT_TRUST_REVOCATION_STATUS_UNKNOWN="true" CERT_TRUST_IS_OFFLINE_REVOCATION="true" />
<InfoStatus value="100" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ChainElement>
<Certificate fileRef="E02AA2C59FD54241309B6EDA86B5C56454A9A8A1.cer" subjectName="siu-SRVDC01-CA" />
<SignatureAlgorithm oid="1.2.840.113549.1.1.5" hashName="SHA1" publicKeyName="RSA" />
<PublicKeyAlgorithm oid="1.2.840.113549.1.1.1" publicKeyName="RSA" publicKeyLength="2048" />
<TrustStatus>
<ErrorStatus value="1000040" CERT_TRUST_REVOCATION_STATUS_UNKNOWN="true" CERT_TRUST_IS_OFFLINE_REVOCATION="true" />
<InfoStatus value="102" CERT_TRUST_HAS_KEY_MATCH_ISSUER="true" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ApplicationUsage any="true" />
<IssuanceUsage />
<RevocationInfo freshnessTime="P2DT21H13M20S">
<RevocationResult value="80092013">The revocation function was unable to check revocation because the revocation server was offline.</RevocationResult>
<StrongSignProperties signHash="RSA/SHA1" issuerPublicKeyLength="2048" />
<DeltaStrongSignProperties signHash="RSA/SHA1" issuerPublicKeyLength="2048" />
<CertificateRevocationList location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?certificateRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="DEEB557897A9FEA217DF83D95BF24CA54051B1CF.crl" issuerName="siu-SRVDC02-CA" />
<CertificateRevocationList deltaCRL="true" location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?deltaRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="58A2CDBC7A238DDD76EEFEDE354A04596F5AED71.crl" issuerName="siu-SRVDC02-CA" />
</RevocationInfo>
</ChainElement>
<ChainElement>
<Certificate fileRef="56500BCD92F8548A9E933CA8698C03B095BBA84E.cer" subjectName="siu-SRVDC02-CA" />
<SignatureAlgorithm oid="1.2.840.113549.1.1.5" hashName="SHA1" publicKeyName="RSA" />
<PublicKeyAlgorithm oid="1.2.840.113549.1.1.1" publicKeyName="RSA" publicKeyLength="2048" />
<TrustStatus>
<ErrorStatus value="0" />
<InfoStatus value="10C" CERT_TRUST_HAS_NAME_MATCH_ISSUER="true" CERT_TRUST_IS_SELF_SIGNED="true" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ApplicationUsage any="true" />
<IssuanceUsage any="true" />
</ChainElement>
</CertificateChain>
<EventAuxInfo ProcessName="certsrv.exe" />
<CorrelationAuxInfo TaskId="{54E4FCD3-E70A-4024-BB81-6A053EAACE21}" SeqNumber="9" />
<Result value="80092013">The revocation function was unable to check revocation because the revocation server was offline.</Result>
</CertGetCertificateChain>
</UserData>
</Event> -
My billing address is correct, but the i keep getting that my security code is incorrect and can't download apps. I have re-entered all of my information in my account, but still get error message. How to over-ride?
If you have American Express, your 4-digit security code is on the front. If you have VISA or MasterCard, your 3-digit security code is outside the signature block on the back of your credit card. It happens to me also.
-
Shuffle keeps blinking yellow?
Having trouble with my Shuffle - when I plug it into the usb port it just keeps blinking yellow and iTunes never recognizes it. According to the battery check it seems ok (green light) however when I press play I get a flashing light alternating between green and yellow. Any help of suggestions would be very appreciated.
thanks jeffWELL im not to sure about the battery but i can tell u that your right if its not green then its not charged fully. Try switching ports or try leaving it overnight. Maybe the battery is faulty and needs replacing. U can get a mains battery charger from amazon.co.uk its called a Mains firepower world tour travel charger it sounds fancy all it is 240 v mains adapter u plug in and it has like plugs for all major countries like USA AUSTRALIA AND EUROPE its a god send its only 19 pounds i got one and mine always goes green on that. Is all the usb ports working fine check in device manager not sure where that is in 2000 i have xp but it will tell u if any of the hubs or ports are faulty laters D
-
I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?
My first advice is "Back up the device, then have it replaced." Second item of advice, "Don't forget your passcode."
One of the purposes of the lock button is to recover from certain software failures. Without the lock button, such a recovery is nearly impossible. My advice would have served you best when the malfuction first developed, not after you forgot your passcode. -
my phone was unable to finish the latest update and gone into recovery mode. will only restore if i do a factory reset, but i dont wanna lose my photo/videos!!! how can i back up up before i restore it. im not able to acces my phone normaly, stuck in recovery or something.
it seemed to have backed up everything just before the software update 6.1.4. so after the full restore i restored from backup and its all still there (mostly)
what a relieve...thx -
My movie rental download was not completed and I was unable to finish the movie. I was charged for it. What can I do to rent the movie again without getting charged for the rental again?
kananga wrote:
To begin, what ADA-compliant options are available to work with a service representative? Good question, and one that I don't know the answer to. Does anything on this page help? Products & Services Overview | Verizon Wireless
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. Service is normally billed through the end of the billing cycle, whether service is provided or not. "Cancellations will become effective on the last day of that month’s billing cycle, and you are responsible for all charges incurred until then." After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. According to their legal docs, the "leagally billable amount" is through the end of the billing cycle. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online? You cannot pay online once the account is cancelled. You will be mailed a paper copy of the final bill, and you can mail a check, or possibly call in and pay over the phone. But online is no longer an option once the account is cancelled. -
What does it mean when a box says my Time Machine back-up disk can't be found?
I clicked on my Time Machine icon on the Dock and a box popped up that says my Time Machine back=up disk can't be found. What does this mean? What should I do about it?
Have you been using Time Machine up until now?
If yes, then check that your Time Machine backup disk is properly connected and mounted. It should appear on the desktop. If it is indeed there, then open Time Machine Preferences and make sure that the disk is designated as the backup disk.
If you haven't been using Time Machine until now, check that a disk that is ~ 3 or 4 times larger than what you plan to back up is connected and mounted, and go into Time Machine prefences and designate it as your backup disk. -
I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?
go to system preferences - security and privacy - under allow applications downloaded from - click on anywhere.
Maybe you are looking for
-
Hi 1 with reference to the sales order number the customer down payment is directly posted into accounts.When the sales order is deleted the system should show a pop up massage stating that the customer down payment already received. 2 when the billi
-
SP Custom Picker - Paging Problem
I am trying to implement custom picker that reads huge data from the database(over 15,000 records). I followed all of the steps in this article. The Problem is I don't know how to enable paging on it. I set the page size to 100 by making "PickerDialo
-
Outlook all day events are one day early in ipod touch calendar...
I recently bought an ipod touch 4th generation, when I tried to sync my outlook 2007 calendar all my all-day-events came up as a whole day early on my ipod touch. I'm running iOS Version: 4.3.5 and App Version: 3.3, outlook 2007 off windows 7. I see
-
I have Nexus 5596UP switch running ver 5.2.1, I recently added Layer 3 card to the swicthes, L3 cards by default comes with LAN_BASE_SERVICES_PKG licence. According to Cisco web site, I need LAN_ENTERPRISE_SERVICES_PKG in order to use VRF lite.. How
-
Iphoto manual sort is grayed out?
View / Sort Photos / Manually.. is grayed out in iPhoto, but I'd like to manually order the way the event groups are display in the "Photos" view... Is it possible?