Macbook pro retina blank backlit screen on boot?

My MBP 13" Retina just stopped rendering the screen. On boot, it chimes and the back light comes on but that's it. At first I thought it was non responsive, but when I connect an external monitor I can see that it works fine. It's just the primary display that doesn't render anything (only backlight with blank, black screen).
A few details worth knowing:
1) Last time I saw my primary display work, I had 10% battery left, I shut the lid. Next time I opened the lid, around 2 days later, it was just blank and backlit. I did a forced restart and from then on it only gave me a blank backlit black screen.
2) Works well if i boot it with an external monitor connected. when the chime comes on, I immediately shut the lid and use only the external display with external keyboard and mouse.
3) Video gets laggy when I use it on dual monitor mode (not the case before this problem happened). I boot up the macbook with an external display connected. No video on both screens. I have to login blindly before the second monitor gets video. Primary display still doesn't render anything, albeit showing a lighted blank black screen.
4) I've already tried resetting the PRAM. didn't help.
Does anyone have any luck/experience with this problem? Please help!

These are symptoms of a GPU problem. Your best option is an appointment at an Apple store genius bar for a FREE definitive evaluation.
Ciao.

Similar Messages

Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

I just Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

dunno, Lynn--maybe Etrecheck. trying running disk utility to verify the status of your hard drive. That may give you a basic idea. Perhaps tech tool pro. As for it running hot, I can't say for sure. try shutting it down and using a vacuum clearner +crevice tool around the back of it. It's been my experience that hard drives usually fail without a lot of warning, luckily you have a backup. Afterwards you can say "Yup, that went bad". I've done a little research and found out that your MacBook Pro doesn't come with a conventional hard drive as such, but an SSD (solid state device) . It's upgradeable (up to 1 TB ) but not cheaply
go here for more info (OWC) :http://eshop.macsales.com. For right now, I'd recommend resetting the SMC/PMU, maybe zapping the pram . to do that, reboot, hold down Apple+Option, P+R keys while rebooting. Hold down for 3 chimes, let go and let it boot. as for the SMC thing....
I'm assuming your battery isn't removeable-shut down computer, plug in MagSafe cable . On built in keyboard, on left side, press Shift-Control-Option and power button at the same time. release all the keys and the power button. press power button again to turn on computer
that is all
John b

MacBook Pro retina and external screens

I connect my recently arrived 15" MacBook Pro retina to one of three 24inch Led displays which I use at different work locations... On two occasions on start up the external screen did not turn on. Power is on, USB not, led display is off, System preferences Displays module finds it... but there's not way to turn the screen on. Next day the very same screen turned on without anything particular being changed. Today I've not been able to turn on another of these screens, yesterday the third screen functioned beautifully more than 12 hrs.
Any suggestions about why this may be happening?
Thank you

Eventually I got so annoyed I tried going back to a time machine backup when everything was still fine. (restoring Mac OSX to a time when the issue occured did not help). That worked, however it would be nice to know how to reset the display settings without losing progress.

Macbook pro retina display broken screen?

My one week old Macbook pro retina display 13 inch slipped from the bed earlier and I'm not sure what happened but I think the screen broke from the inside? -look at the pictures attached-
I bought it from Oman, in the middle east. And I'm moving to Rochester, New York in two weeks so I've decided to fix it there.
Would this be covered under warranty or will I have to pay? And how much would it cost to get this fixed?

Accidental damage is not covered. Maybe your home owner / renters insurance would cover it?
You can speculate more about cost here:
https://www.techrestore.com/mac/
http://www.dttservice.com
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com

Macbook Pro retina display gray screen on start up

New Macbook pro 1 week old gets a grey screen on startup
Tried to do a safeboot but it stops after 5 lines.
any ideas???

You have a Retina model MBP. It did not come with installer discs. You would use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

X220: Blank, backlit screen on boot

Hey everyone.
Recently had some fan errors, so I followed advice on here actually to replace it. Today I replaced the fan and took care in reassembling the rest of the laptop. However, now when I boot it up the screen stays as black and backlit as if it was perpetually loading windows. I can hear windows 7 boot up, as well as a few Apps start. I can also change the brightness of this backlit screen with function keys and such.
I checked the connections where I had previously disconnected the display several times and they're sound. Any one have any tips? The fan works fine now, but I created another problem in solving my first one.
thanks!

Thanks for the tips Hemanth. This x220 model only has vga out and I surprisingly don't have a single via port on my tv or anywhere in my apartment.
I also tried reseating the RAM a few times and performed a power drain several times, still with no result. I've had this laptop for a couple years now, so I don't have any sort of warranty on it at all. I also found A thread on here with a similar, albeit unresolved, problem here https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/X220-blank-screen-at-boot-not-even-POST-spash-screen/m-p/532083
The OP has the same problem as me. Is there anything else to try or am I more or less in a bad place?

Dropped MacBook Pro retina display and screen won't work

I accidental just dropped my MacBook Pro with retina display on its left side from about 2 feet. There doesn't appear to be any external damage except for the screen which is just white with some black on the left side. I can change the brightness and everything else appears to work. Any ideas on how to fix it or how much it would cost to repair. Thanks

Oh dear
Call your local Apple Store to get a quote for a repair.
And check your home insurance to see if it's covered (it might be if you have accidental damage cover and you dropped it at home).
If you're not ready or able to afford a repair or replacement, you might be able to keep using your MBP if you connect it to an external display.
I don't know how important portability is for you, but if you would normally only use your MBP in one or two specific places (eg home and work), you could set up one external display in each location.
Good luck!

Macbook pro retina display SECOND SCREEN pixel failure, out of warranty will apple fix it?

I bought my macbook pro when it first came out, had to have a screen replaced due to pixel failure 7 months later. Now again im having one fail, then another, and now a cluster has failed. My mac is out of warranty but IM ******, I bought a $2700 Laptop to have to change the screen once a year?! this is BS

Maybe you should of bought the Applecare extended warranty. You had all of the first year to buy that.
Now all you can do is go to an Apple store and Ask if it will be changed free of charge and if not you will have to pay for it.

MacBook Pro frozen at bank screen with boot disc in SuperDrive

I noticed my notebook running a little slower than usual so I took the usual steps, without much luck. I then verified and repaired disk permissions in Disk Utility. Tried to use disk repair but got a message that the disk was damaged and I needed to boot from an install disc and run Disk Utility from it. I put the disc in, chose it as my boot disc in Preferences, and ever since once I power up all I get is the chime and a blank grey dead screen. Can somebody either help me proceed or at the very least remove the disc from the SuperDrive Thanks in advance

OK got the disc to eject, Thank you. computer is functioning again but I'm back to square one with Disk Utility giving me the following message:
Verifying volume “Macintosh HD”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Invalid sibling link
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
What is my next step? I don't have an installation disc, I upgraded to Lion online. Is there any other way to proceed?

How do I get apple to fix my MacBook Pro (Retina, Mid 2012) screen, which has always ghosted?

Since I bought my MacBook (mid-2012) the screen has had ghosting problems. Like, since day 0. At first it wasn't really a problem. I wasn't doing graphical work; I didn't need "pixel perfect." But, then I started needing to spend time in Photoshop again. The ghosting made it a frustrating and error-prone process.
My screen ghosts in about 30 seconds of being on the same image for any visible region. So, basically, if if I work at zoom 100% for 30 seconds, using the brush for a few quick strokes, then zoom in, I have to wait another 30 seconds for the false-shadows and hues to go away. It was unusable. I was busy, so I just started doing graphical work on my linux workstation with Gimp. I was too busy to get it repaired.
Finally, a year or so ago when I had some time, I brought my computer into the Apple store. I told them of my ghosting issue, along with an odd sound from the fan when the CPU was pegged. They held it overnight. They claimed they did some diagnostics and cleaned the fan. I thought, well, I don't think that will fix anything, but I signed off. The Applestore staff are very friendly. It's difficult to say, "wait, no -- this is ****** up," to them.
Of course, that fixed nothing. Why would it? I went back to being busy. Then, recently, I had more time again. I brought my laptop into the store. Since Apple had just issued a notice about my year's laptop having graphics issues, I thought, "finally, they understand there is a problem!" They took my computer and shipped it out to Texas, aware of not only the random buffer-level (graphics card) pixelation, but also about the ghosting. It came back with a new logic board and heat sink. Again, this didn't seem likely to fix it, but I didn't object at the store. They were so friendly there.
I bring it home. Unsurprisingly, the ghosting issue was unresolved. This fantastic retna screen is functionally useless for me when doing graphical work. On my Apple. A computer that lauds the creative power of graphical designers. Really?
In no world this okay (see video) for an Apple product that I spent several thousands of dollars on, with the expectation that I could do graphical work. The challenge I heard both times from Apple employees -- "how long were you on the same screen" -- is an utterly absurd question. The video answers it -- about 30 seconds. But, in any case, you can't bill this as a high resolution screen for graphical designers and artists with this problem. We spend time on single screens, fussing over single pixels for hours.
I'm willing to assume that my screen was oddly defective. And, that this was not indicative of a common fault in this particular model. But, it demands resolution. The screen needs to be replaced. I'm tired of explaining that to the Apple store.
John Nelson

You need to upgrade to OS X Mountain Lion (10.8) to take advantage of AirPlay Mirroring

MacBook Pro Retina Heat Issues Screen Discolored

I've been having major heat issues while using the Mac, mostly it has been heating up while playing games. I have been using an external monitor and had the lid closed and when I opened the lid i saw the screen was discolored by the heat that was coming from under the keyboard? The fan seem to be running full throttle most of the time using the discreet graphics card.
Do I need to contact apple care?
thanks

Yes, you should contact Apple.

MacBook Pro retina 13" (late 2013, Haswell) why is the highest resolution rendered in 3360x2100, which the system obviously can't handle?!

Hey Apple and Apple users,
I just recently switched from an MacBook Air (mid 2013) to the new Haswell MacBook Pro retina 13" (late 2013 model).
The main reason to do so was the better screen and the option to run higher scaled resolutions, as advertised.
I was willing to trade in the Air's low weight, smaller formfactor and the extra batterylife for the better screen.
When it comes to resolutions:
1280x800 is just a joke nowadays, why is the MacBook Pro still based on it? 13" and 1440x900 work quite fine...see MacBook Air.
1440x900 is okay in everyday life situations, but sometimes you just need "more space" as the third scaling option calls it as well in the display-settings.
1680x1050 on 13" can sometimes be challenging, but it is really fine if you need to work and have a lot UI elements to deal with (Photoshop etc.)
So 1680x1050 scaled on the 2560x1600 screen would be my daily driver for work. So I expected a scaling factor of "1.5238..." (2560/1680) will be used most of the time.
Frankly spoken...I am really disappointed by the 13" retina MacBook Pro and the way OS X Mavericks is handling the scaling.
It obiously works well and responsive with the 1280x800 non-scaling resolution ("best for retina, scaling factor 2: 1280 --> 2560).
Is still "okay-snappy" at 1440x900 (scaling factor 1.777...: 1440 --> 2560).
But it totally breaks down at 1680x1050 (scaling factor 1.523...: 1680 --> 2560).
I use "Mission Control" all the time and it is stuttering and slow...overall a sluggish and unbearable experience.
The same goes for Desktop-Switching by swiping the screens or resizing and moving windows and files around.
So I was wondering why...and then I noticed that when taking a screenshot of my entire screen (CMD + 3) the image size of the screenshot was 3360x2100 and not the expected 2560x1600.
This means Mavericks is not scaling the UI with the appropriate factor (see above). For retina MacBooks it ist simply rendering one pixel of the classic, non-retina Interface in now 4 pixels (2x2) and sending this straight to the screen, which then "scales" it down to the resolution it is able to display.
Why is this bothering me? – Because the machine has to do a lot more work to render the higher resolution that can't even be displayed, due to the screens limitations.
2560x1600 = 4096000 pixels = 100%
3360x2100 = 7056000 pixels = 172%
This means the MacBook has to render 72% more information than actually can be displayed on the built-in screen and are just lost.
Of course this makes the overall UI feel sluggish and idly! Especially with the not that performant Intel Iris IGP and no dedicated graphics card.
All this extra "rendering" just results in a worse battery life due to the extra work that the graphics card and CPU have to do.
First, Apple...are you serious about this?
What can we do about this?
Is there a way to have this properly scaled?
Thanks in advance to everyone.

Okay...I thought deeply about this issue.
Even looking into ways to maybe fixing this on the software side. But it occured to me that this is to deeply embedded into the system that it won't be possbile to come up with a sufficient third-party solution.taht
The problem is that there is no intermediate step inbetween "standard DPI" graphics and "HiDPI" (image-resources named "[email protected]").
But there should be one, to minimize the amount of image information that needs to be processed by the device.
This effects especially the MacBook Pro retina 13", as it has the less powerful Intel Iris IGP, when performing on the highest scaled resolution (equivalent to 1650x1080).
As well as the MacBook Pro retina 15" without a dedicated, second Graphics Unit,when performing on the highest possible scaled resolution (equivalent to 1920x1200).
Those devices don't have enough resources to handle the consequential "HiDPI" resolutions of 3360x2100 for the 13" and 3840x2400 for the 15" model.
(Comment: 3840x2400 = 9,2MP, which is more than the standard 4K resolution of 3840x2160.
I analyzed the scaling factors as follows:
Factor "2" to display 1280x800 on the 13" model and 1440x900 on the 15" model in HiDPI.
Factor "1.777..." would be required to display 1440x900 on the 2560x1600 screen of the 13" model.
Factor "1.714..." would be required to display 1650x1080 on the 2880x1800 screen of the 15" model.
Factor "1.523..." would be required to display 1650x1080 on the 2560x1600 screen of the 13" model.
Factor "1.5" would be required to display 1920x1200 on the 2800x1800 screen of the 15" model.
As all the models seem to have no problem with rendering the intermediate scaling step (1440x900 for the 13" and 1680x1050 for the 15" model) at HiDPI, hence with the scaling factor 2. There is no real need to provide the UI-elements.
But in my opinion there is a strong need for a "MidDPI" ([email protected]) intermediate step for all the UI graphic elements that wis based on the scaling factor 1.5.
This would result in the following:
13" MacBook Pro retina with 2560x1600 screen:
1280x 800 @ 2x = 2560x1600 (no surplus, native screen resolution)
1440x 900 @ 2x = 2880x1800 (the surplus of 1088000px = ~1MP can still be handled and compansated by the weak Iris IGP)
1680x1050 @ 2x = 3360x2100 (the surplus of 2960000px = ~3MP is too much for the weak Iris IGP)
NEW 1680x1050 @ 1.5x = 2520x1575 (with a small border of left=20px, bottom=13, right=20, top=12 pixels, which means ~2,2mm and ~1.3mm around the 1.5x scaled image!).
15" MacBook Pro retina with 2880x1800 screen:
1440x900 @ 2x = 2880x1800 (no surplus, native screen resolution)
1680x1050 @ 2x = 3360x2100 (the surplus of 1872000px = ~2MP can still be handled by the Iris Pro IGP)
1920x1200 @ 2x = 3840x2400 (the surplus of 4032000px = ~4MP can't be handled sufficiently by the Iris Pro IGP)
NEW 1920x1200 @ 1.5x = 2800x1800 (nu surplus, native screen resolution, no border needed!)
The big advantage is that all the graphics have already been remodeled for the HiDPI mode.
So scaling those "factor 2x" images down to "factor 1.5x" should be comparably easy!
Example:
Left: Traditional "standard DPI" icon of "all my files".
Right: "@2x.png" for the "HiDPI" modes.
Middle: "@1.5x.png" suggestions for the "MidDPI" mode; easily scaled down from the lovely HiDPI graphics.
With this simple introduction of the "MidDPI" modes a significant amount of processing power can be saved.
This not only improves battery life when driving those higher scaled resolutions, but also lets the user access those resources for what really matters: processing power for the primary job that the Mac needs to get done.
Thanks in advance.

Macbook pro retina display doesn't work occasionally. Random restarts. I can remote into the computer when display isn't working correctly

I have some issue with my 2012 Macbook Pro Retina. The screen intermittently decides to just not work. Sometimes on startup i hear the start up noise but the screen doesn't turn on. I am able to remote into the computer when the screen doesn't work. I can't seem to find any rhyme or reason as to when it works and when it doesn't. I've reset the PRAM and SMC sometimes that will bring the screen back sometimes not.
Any ideas?

You can try the Apple Hardware test, not definitive by any means, especially intermittent problems, but it is a start.
AHT http://support.apple.com/kb/HT1509
I think i would take it in for a free 'Apple Service Diagnostics' test
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

If your MBP is under warranty, bring it to an Apple store and have the technicians fix it. If not, try the steps in this support article:
http://support.apple.com/kb/ts2570
Ciao.

13" macbook pro retina 2013 problem: blank screen when waking up from standby

I bought a 13" macbook pro retina 2013 about 3 months ago and it is for about a week or two that I encountered a problem: when I close the lid and open it after a while(or it goes to standby by not using it for some time and then I wake it up by pressing a button), sometimes it shows a blank dark screen(with mouse cursor) for about 15 seconds and then either the screen is turned off(and by pressing a key it shows the login screen) or it shows the normal login screen.

I also have this problem, and now the
NVIDIA GeForce GT 650M is not working at all
I use gfxCardStatus for work on integrated card and i can't use other displays obviously, because all video outputs (HDMI & Thunderbolt) are taking their ways from discrete card (but working on other displays is my profession of audiovisual artist). My world guarranty is over now, new motherboard costs near 1500 $ and now i don't want what to do.Maybe reballing of videochip will help me, but i'm afraid that not autorised service in my country will kill my motherboard at all. This is my first mac & i have lost many time for take the money for buyng it. I have so much frustration.

Macbook pro retina blank backlit screen on boot?

Similar Messages

Maybe you are looking for