MacBook Pro.sparsebundle" is already in use.
my time capsule back is not backing up for the last couble of days. The response I get is The backup disk image “/Volumes/Felix Pereira's Time Capsul/Felix Pereira’s MacBook Pro.sparsebundle” is already in use.
Please look over to the right of this page under the heading of More Like This for multiple answers and solutions.
Or, see #C12 in Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0 -
My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.
Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
This is the second time I've encountered this issue with Time Capsule using Time Machine automatic backup. I haven't found the following specific error message in the list of troubleshooting issues: "Time Capsule cannot complete the backup. The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use."
I'm not certain what causes this issue. I think it may have something to do with having to force shutdown with apps still open when the beachball hangs and the MacBook has to be rebooted.
Has anyone else dealt with this issue?Welcome to Apple Support Communities
Restart your Mac and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
Help !
The last few days my time capsule reports an error The backup disk image “/Volumes/Data-1/MacBook Pro.sparsebundle” is already in use.
To make things worse I seem to be loosing my screen so need to make a back up ASAPMake sure that no other Macs are backing up at the time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This will fix the issue about 98% of the time. If you are in the unlucky 2% category, please post back for more assistance -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
For the past couple weeks, my Time Machine has not been backing up file from my MacBook Pro. I've had the Time Capsule for a couple years now. Entering the Time Machine I discovered that there are no files before "yesterday" yet there are only 161.0 GB of 998.06 GB available. A "Failed" message apprears with a popup message: "The backup disk image “/Volumes/ELBs Time Ca/ELB’s MacBook Pro.sparsebundle” is already in use." How can it be in use when Time Machine takes hours looking for the device?
Another error code message also pops up from time to time: Finder error code -6584. What is that? And how is it fixed?
All software is up to date on this computer and Time Capsule.Further to my earlier response (system re-start and firmware update resulted in full Time Machine backup) I waited until the next scheduled backup to determine success.
As it has turned out, the Time Machine's next backup was for 48 kb and ran for eight hours! The progress bar was complete (solid blue) and I therefore stopped the backup. It has been "stopping backup" for the past hour.
What is wrong with this process? -
I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan -
Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use."
Can anyone assist me in correcting the problem causing this? Thanks.Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
"Time Machine couldn’t complete the backup to “***Network Name***’ The Backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use"
What does this mean and how do you fix it?I got that the file is in use, what is the trick to release the file. This has something to do with X.8, never had this problem befor I uploaded .8
-
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html -
My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti’s MacBook Pro.sparsebundle” is already in use. Any suggestions?
I am trying to back up my Macbook Pro to a time capsule attached to my iMac. When I first installed the Time Capsule, all backups went well.Reboot the TC.. it has got lost.. or reboot the whole network.. restart in correct order. .modem router.. TC.. clients.
It suddenly will reappear.. you might need to reboot it again in a few days. .such is apple software today.
Some more info C12. http://pondini.org/TM/Troubleshooting.html -
My time machine won't back up....The message reads : The backup disc image"/volumes/(my name)'s time capsule/(my name)'s macbook pro. sparsebundle" is already in use........I'm not using anything else that I know of.....?.......Help!
ATXMacMan wrote:
I use OS X server for maintaing Time Machine backups for several macs
Ah, that's a new wrinkle to me. I haven't tested the Server product, but there are a number of differences. As far as I can tell, the firmware update solved this for most, but not all, users of standard OSX.
Are you still on Snow Leopard server? It's quite different from later versions, I understand.
Have you tried selecting the base station, then Base Station > Restart via Aiport Utility's menubar? That still disconnects everyone, but might work by itself.
Otherwise, sorry, but I'm out of my comfort zone.
Hopefully one of the networking gurus will have an idea or two. -
Here is the message I got from the red "i" message... please help.The backup disk image “/Volumes/Data/Lisa’s MacBook Pro.sparsebundle” is already in use.
http://pondini.org/TM/C12.html
Maybe you are looking for
-
class QueryAction extends AbstractAction // Constructor QueryAction(String name) super(name); String iconFileName = "Images/" + name + ".gif"; if(new File(iconFileName).exists()) putValue(SMALL_ICON, new ImageIcon(iconFileName)); QueryAction anAction
-
What's it cost to cancel a At&T contract?
What's it cost to cancel a At&T contract?
-
Slow transfer rate of data to remote hard drive on airport extreme base station
Hi there currently trying to transfer RAW picture files to my Seagate Go Flex Hard drive through my wireless network. Have an airport Extreme base station that the hard drive is connected to through a USB cable (3 i think could be 2.0). Taking over a
-
How use System exec.vi...
hi, i want to run a shortcut from a labview application. i know the command line to do this from MS DOS but i don't understand how works System exec.vi. Could you help me giving some example? Thank you
-
Is there a SATA and USB 2 CARD for my G4?
I am looking to expand my old G4 to read SATA HD and USB2 DRIVE. Please recommend one. Heard some problem about deep sleep freeze. Thanks!