Macbook Pro....what would cause it to turn the screen black and restart on its own. Message after it restarts says restarted due to problems.
Macbook Pro...my screen goes black and it restarts itself. The message after it restarts says "restart due to problems" Any ideas what I should do or look for? It randomly happens and is becomeing more frequent.
kernel panic http://support.apple.com/kb/ts3742
Similar Messages
-
my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files. -
I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret. -
What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?
If you have multiple devices backing up to the Cloud, you will see all of them listed. You would click on each device to change what is backed up from that device. You can then delete your individual back-ups.
Once you have all your settings to your liking, you can then go back to Settings>iCloud>Storage & Backup, and click on Back Up Now (bottom of the screen) to create a fresh backup with your new settings.
Cheers,
GB -
My macbook pro randomly turns the screen black!
my macbook pro randomly turns the screen black when it's still on!
i tried to change the energy saver settings but it still happens.
i turn my computer off aprox. every 2 days i tried to bring a solution to this but its just weird
please help!
ps. this has been happening since i downloaded the first version of OS X LionMine does this too, have you had any luck with any solutions?
-
Macbook pro (2010) Powers off everytime i close the screen.HELP PLEASE
Macbook pro (2010) Powers off everytime i close the screen, used to go into hibernate but now it powers off....HELP PLEASE
Computer is just over a year old and this is the first problem i have ever had, Nothing has changed in the power saver settings, and its getting frustrating everytime i go to use it i need to power it on and it always seems that it takes awhile before it finnaly realizes to turn on when pushing the button.So apparntly it is not turning off, however the screen is just not coming back on once i open the lid. so i push the power button, it shuts down then i press it again and it restarts. software or hardware error?
-
I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?
Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa. -
I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
UjjalBackup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379 -
I've a MacBook Pro Mid 2010 with OS X Lion 10.7.2. and when i try to update my software it says you are up to date in fact 10.7.3 is out.
Actually, the Software Update has been replaced by the Combo Update.
-
Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.
Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce -
I HAVE A MAC POWERBOOK G4 AND WOULD LIKE TO TRANSFER MY FILES, PHOTOS AND VIDS TO MY NEW MAC PRO, WHAT WOULD BE THE BEST METHOD?? THANKS ROB
I think the easiest way is to use a firewire cable (you will need on like this: http://www.google.com/products/catalog?q=Firewire+400+to+800+cable&oe=utf-8&rls= org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=120962573 04625337030&sa=X&ei=PytQT9r4NtOBsgL9s_C6Dg&ved=0CHYQ8gIwAA).
Power up the Power Mac G4 and hold the "T" key while it is booting (this puts the G4 notebook in Firewire Target Disk mode). Connect the G4 notebook to the newer MacBook Pro and use the Migration assistant (/Applications/Utilities) OR browse through the files and copy what you want. -
Headphone jack not working on new Macbook Pro what is causing this?
My 17 inch Macbook Pro is less than two weeks old. The headphone jack does not recognize the headphones about half the time. This occurs with several pairs of headphones and yes, they are ther right size. This is really frustrating on a brand new 3500 dollar machine. What is causing this? It almost seems as if the headphones cannot make contact due to the fact that the connection is too far recessed. I don't live near an Apple store so dealing with this is going to be a P.I.T.A. Anyone have any ideas on how I might fix this issue? Thanks!
Hi, and thanks for your reply. I didn't have a red light emitting from the jack. I had already checked in the sound preferences to make sure the settings were correct. The headphones were not being recognized. This was not working with several differing sets of headphones. I made a phone appt. with Applecare. The laptop PRAM was reset and it works. There is still a bit of a delay when I plug in the headphones before they are recognized and I do feel the port is just a bit "off" as the no headphones plug all the way in. They seem to just sit almost flush but, not quite. However, resetting it resolved the issue to a satifactory level. Applecare said the issue was that not enough power was getting to that function on my laptop. They gave me the case number and I can use it if I have any further problem when I take the laptop in with me to any Apple service center. I was quite satisfied with how this was handled by Apple and if I have anymore issues will follow up.
I love this laptop but, even though this is working now I do feel that port is somewhat recessed a bit much.
I also want to add that this is my first Mac and despite having had this issue I was extremely impressed with the Applecare call that I got to help resolve this. One of the reasons I went with a Mac was the reputation for service Apple has. I was fed up with Sony to the hilt. I was glad I went with this Mac despite the headphone issue because had I still been with Sony, I'd have been give a major run around to deal with this issue. So far, Apple has tried everything possible to help me with this and assured me should I have any further issue they will immediately resolve it or give me a new machine. WAY better than dealing with Sony! I do not regret going with this MAC headphone issue or not! -
Hello Macbook Pro Musicians--I cannot read sheet music from my 13" macbook or from an IPad. The print is too small for these aging eyes! So I need to get a large monitor to attach to the Macbook. I want the monitor to be connected wirelessly or using a blue tooth. This will eliminate alot of potential mishaps
when playing out. Also I am having a time figuring out how I am going to safely keep the monitor on somekind of music stand without falling!!! Can anyone help me with this?Hi Julius,
As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
Peace,
Jeremiah -
Hello all,
I am new to posting on this forum but I really hope that someone out there can help me out. I have a 13" MacBook Pro, 2.53 GHz Core 2 Duo, 4GB 1067 MHz DDR3, running OSX 10.6.8. My problem is that when I unplug the laptop form the charger and run it on the battery, the computer becomes unresponsive to any commands at all. It basically really slows down to a crawl. Even when rebooting it will take 5-10 minutes or more to do so. The odd thing is, when it gets plugged back in while any of this is going on, within a minute or two it works perfectly. It has been in a mac authorized repair shop for 7 weeks and has had a new logic board and a new hard drive replaced. The battery was tested and charges fine, holds a charge when unplugged, and the system profile shows the battery at Normal. Recently, many knowledgeable mac enthusiasts gave me tip that might help. Here is what I did: Ran an SMC reboot (no success), rebooted the computer under safe mode then unplugged it to test (no success), and ran a hardware test on the install disk (showed hardware ok)
I am at a loss as to what to do next. It has become impossible to use this laptop for my classes when it is unplugged. I am about ready to just go buy a new one, and call this one a goner.
I am hoping someone reading this can help with any other ideas on its problem. Help? Anyone?
SteveLPBassman,
since the tech in your IT department was able to copy your daughter’s data from her MacBook Pro’s internal disk, I’d suggest completely erasing the internal disk (using Disk Utility in Recovery mode, reformatting it with a “Mac OS Extended (Journaled)” filesystem), reïnstalling its original version of Mac OS X (either Snow Leopard from the grey Mac OS X Install DVD if it originally came with two grey DVDs, or Lion via OS X Internet Recovery if no grey DVDs originally came with it), running Software Update to get it to 10.6.8 or 10.7.5 respectively, reïnstalling Mavericks, running Software Update again to get it up to date, and finally restoring your daughter’s data.
Maybe you are looking for
-
Business objects for parking of vendor invoices (Both FV60 and MIR7) ?
Workflow guus, I have a situtation where I have to send certain email when a vendor invoice document is parked using 1) FI vendor invoices using transaction FV60. Can someone tell which business object has event for parking of FI vendor invoice ? 2)
-
How to start with LACP on two SG 200-50?
Hi, I've two SG 200-50 and I need to use LACP? What should I do? Adrian
-
Hi, expert: The customer mass update is planned to be done using a BDC session. It is required that all updated fields go through XD02 validation with the exception of Address Management validation. Is it possible to skip the Address Management vali
-
Xperts, I hv an ALV report program which displays some output. While i am printing it , it prints some fields as blank.. Actual report output mmmmm1 hhhhh1 kkkkk1 mmmmm2 hhhhh2 kkkkk2 mmmmm3 hhhhh3 kkkkk3 Prrinted output mmmmm1 hhhhh1 kkkkk1 mmmmm2 h
-
confirmed e-mail [email protected]