Macbook Pro Won't Boot in Safe Mode...it also won't stop trying to boot in safe mode

I was having an issue with Finder crashing on my Macbook Pro. After startup Finder would give me the spinning wheel of death if I clicked "about this Mac." To try to resolve this issue, I attempted to boot in Safe Mode, but it basically died each time when the progress bar reached around 20%. I was able to get into the Disk Utility and attempt to repair, but I learned that I need to back up and restore. (I tried this twice.) However, my machine will now only attempt to boot in Safe Mode (at which point it reverts to dying at around 20%). How can I back up my machine if I can't boot into either safe mode or regular mode?
(P.S., If you can't tell, I'm not hyper computer literate, so simple explanations will be most helpful. Thanks!)

dullman82,
as you’ve discovered, the option to back up is currently unavailable to you with your disk in its current condition. You can try these two possibilities:
Install OS X onto an external disk, boot from your external disk, run Software Update to get it up-to-date in its version, and try backing up your internal disk when booted from your external disk;
Boot into Recovery mode, and select Reïnstall Mac OS X to reïnstall OS X on your internal disk (which should leave your other files there untouched) to see if that will fix your Finder problem.

Similar Messages

My macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas?

my macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas? It's really worrying me because I haven't had it for up tp 2months and last week everytime I switch it on it makes sooo much noise. And I treat like an egg so I don't understand whats going on.

Hey,
My friend had a very similar issue to yours. The issue came down to the pins of the MagSafe not meeting with the MacBook perfectly causing the lights and the transfer of power to be wacko. I'm not sure if this is issue that your experiencing, but its worth checking out the pins and the MagSafe area on your MacBook for debris.
Troubleshooting Magsafe power adapters with stuck pins
If that is all clear, then I would suggest you call AppleCare or take it in to an Apple Store to have it checked out.
Tom

Macbook Pro won't stop syncing unplugged ipod 5

I plugged my iphone 5 into my new macbook pro (with retina display) via usb port to sync it and back up itunes and all was well, all my music is now on my iphone and my macbook. No follow up issues. However, when i plug in my ipod 5, things started to go wrong. Backing it up wouldn't work at all and i couldn't sync ANY of my other apps with it and so after about 45 minutes, i gave up. I ejected my ipod and i thought everything was ok until every time i tried to shut down my macbook, i would get a notification asking if i was still willing to shut down my laptop even though itunes was still trying to back up with my ipod. I was confused and went to look at itunes and tried clicking 'Quit Back up' which didn't work as my laptop completely disregarded me.
Then, I thought, maybe if i click sync ipod, it will realise that there is nothing plugged in and then it will quit. Not the case. When i clicked sync it actually started syncing my ipod but my ipod wasnt aware of it. On itunes on my macbook, it was mainly blank, not showing any of the backup options like it usually does while syncing and what not. This has been going on for nearly a week.
Because backing up and syncing take up a lot of battery, my laptop has been reaching low battery in about 45mins-1hour of use. Itunes is refusing to let me quit and shut down my laptop even though i click to stop sync when it asks me. Itunes is constantly running in the background draining my battery life. I have now just plugged in the same ipod but my itunes has failed to recognise it. This is also stopping me from updating my software with the newest update.
I don't know what i'm meant to do because i feel powerless and as a first time mac user, who, by the way, does nothing but surf the net and do schoolwork on it, i am very shocked by how quickly this has happened as i have only had this macbook pro for under 4 months.
Hope this gets answered asap as this has been going on for about a week. Thank you

The first thing I'd do is boot to your install DVD (Cmd-C) or recovery partition (Cmd-R in case you're running Lion or Mountain Lion). Start Disk Utility and repair the disk and its permissions. With any luck, that will get your system running properly again. If not, we'll walk you through resetting the SMC and NVRAM.

MacBook Pro won't stop thinking

my computer will start, and my home screen will come up, but the parachute won't stop spinning (thinking). my Internet indicator won't come on most of the time, maybe every fourth time I start it. can I manually restore it?

The first thing I'd do is boot to your install DVD (Cmd-C) or recovery partition (Cmd-R in case you're running Lion or Mountain Lion). Start Disk Utility and repair the disk and its permissions. With any luck, that will get your system running properly again. If not, we'll walk you through resetting the SMC and NVRAM.

MacBook Pro won't stop rebooting. Options to get past the gray screen?

I made an adjustment to sharing on HD and ever since then the MacBook is rebooting again and again. Any suggestions?

Thank you for the response. I have tried starting in safe mode and it is not taking. The cycle continues to reboot after about a minute or two. Once when I tried starting in force OS X mode holding down "X" when starting I did get the scrolling text but then the prompt asked to exit or enter a command. Not knowing what command to enter, I typed exit. This did not resolve the problem obviously. I am supposed to get a call from an Apple person later this morning. I am hoping he/she can help.
I am not sure I know how to get to Disc Utilities if I can't get past the grey screen. Any suggestions? Should I boot off of my system discs?
Thanks again for your response.

My MacBook Pro won't stop announcing the time in Japanese.

It was funny at first but now I want it to stop.

Hey TravisBickle,
Thanks for the question. Let’s check your Date & Time preferences, and disable the “Announce the time” option:
OS X Mavericks: Set date and time options
http://support.apple.com/kb/PH14090
1. Choose Apple menu > System Preferences, then click Date & Time.
2. Do any of the following:
- Click Date & Time, then choose to set date and time automatically or manually.
- Click Time Zone, then select your city.
- Click Clock, then make sure that “Show date and time in menu bar” is selected.
If you want to hear the time announced, select “Announce the time,” then choose from the pop-up menu how frequently you want the time announced. If you like, customize the voice.
Thanks,
Matt M.

Macbook Pro won't stop indexing!

Hey yall ive had my MBP for right around 15 months and lately it was beachballing alot so i installed Onyx. Then it started freezing and BB'ing even more with Firefox. So i completly uninstalled Onyx and firefox. That solved the problem for the most part. Then it kept on BB'ing some more when using safari. So i did the repair permissions thing and now my MBP has been indexing for like 2 days and hasnt made in progress. I just want my computer back to where it was quick and did BB every five minutes. What do i need to do?

I am in almost the same situation.
The only differences are that I had gone in and tried to repair my volume. I did this once and it seemed to solve the problem. Then the symptoms came back and I did it again, but the second time it couldn't repair. So I reformated and reinstalled Lion, brought my system back with a time machine transfer. However the symptoms are back again now.
I also did NOT uninstall Onyx or Firefox.
Someone please help us both.

My Macbook Pro won't boot up, only in safe mode!

Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use. my usb memory stick doesn't seem to be recognized while in safe mode. I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac. The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper. than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times. Ever since it won't boot up unless I use safe mode. Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates. So I am horribly confused at this point. Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

Macbook Pro won't boot into safe mode or via bootable USB key

Hi,
Am running OSX Lion latest version on my Macbook Pro 4,1 and can't get the thing to boot from any source. Always get's stuck at the grey screen with apple logo. Have tried all the following...
- Straight Boot (power on)
- Boot via Recovery HD (hold option on bootup then select)
- Boot via Safe Mode (Holding Shift on bootup)
- Boot via Safe Mode Verbose (Shift, Command, V)
- Boot via bootable Lion USB Key (Hold option, and choose the USB drive - not the same USB key works on my other macbook pro)
On every one (except verbose) it just get's stuck on the grey screen with spinning timer thingie.
I have done PVRAM reset, SMC reset and have reseated the RAM and all to no avail. I'm pretty sure the problem was caused by removing battery at wrong time (device not responding after sleep mode started and I plugged in power - should have been more patient!)
I have a Time Machine backup but it's a bit older than I thought and very much want to get my newer photos off it before rebuilding - not that Time Machine would work in current state anyway.
So what are my remaining options? Will I have to open it up and remove the HD as next step or is there anything else left to try? Can I remove the HD and connect it via a USB caddy to my existing Mac to recover info (hardrive spins and sounds ok to me)?
Any advice appreciated...

ds store wrote:
Yes, once the data is off you can use Disk Utility to Erase the entire drive (Lion + Recovery) with the Zero option (one selection below 7x) then use the Lion USB to install it fresh and stick it back into the machine.
Thanks for the info - I removed the HD and data is all ok on there so very happy about that. Before I wipe the data (all backed up now) I thought I would try booting the mac without any harddrive installed - using a OSX Lion bootable USB. However, still can't get past the grey apple screen and circle icon whirling away. I know the USB works ok, as tried it in my 2011 Macbook Pro and it boots absolutely fine.
I am happy to wipe the HD now and start again, but seeing as the DVD Drive is broken I'll probably need a USB drive boot to install OSX onto the wiped HD anyway. I'm a bit lost as to what to try now.

My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

Mac OS X: Gray screen appears during startup - Apple Support

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

My MacBook Pro won't boot and apparently my HDD is locked

My MacBook Pro won't boot up. And it's says my HDD is locked when i try and reinstall OS. Help me please good people.

you want to check how many threads with same question first, and look in
Mac OS version forum that you have; and the notebook MacBook instead of the workstation forum for Mac Pro (non-laptop)
Not a lot of detail to go by with "won't boot" though.
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Troubleshooting: My computer won't turn on
https://support.apple.com/kb/TS1367
Assume you know what your OS, how to use the Recovery Mode, and how to repair or do Safe boot and other tasks.
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Macbook Pro Won't Boot in Safe Mode...it also won't stop trying to boot in safe mode

Similar Messages

Maybe you are looking for