Mackie onyx 1640i digital mixer compatible with logic pro x??

I have a macbook pro 10.9.1. And was curious about purchasing a mackie onyx 1640i digital mixer. Is it compatible with logic pro x DAW?? Feed back would be much, much appreciated!

Well I got the 13 mackbook pro retina, mackie onyx1640i three days ago and havent got the onyx and the mac to talk to each other. Problem is, mackie had a firewire 400 output and the Mac has a thunderbolt input. So i guess you got to use adapters? I have an old macbook pro and it does have a 400 firewire input. I dont know what they were thinking, they need a 400 firewire and one end and a thunderbolt cable at he other. Marco805

Similar Messages

Korg nano séries it compatible with Logic Pro x ?

Korg nano séries it compatible with Logic Pro x ?

It's usually not about if the hardware is compatible with LPX.. It's if it is compatible with Mountain Lion that matters... as LPX needs 10.8.4 to run...
So, if the Nano series is compatible with Mountain Lion, you should be good to go..
To find out, see Korg's website
http://www.korg.com/SupportPage.aspx?productid=415
...and download the compatibility chart found there...

Is Steinberg MR816csx compatible with Logic Pro 8?

Hi
I got a MR816csx two days back, and was wondering if it is compatible with Logic pro 8.
Thanks

Hi,
it should be, if this article is right:
http://www.soundonsound.com/sos/nov08/articles/steinbergmr816csx.htm
Regards,
Jaap

Is MBOX compatible with logic pro?

I was offered to buy an MBOX at a very reasonable price, and I have been looking into getting a preamp. Is the Mbox compatible with Logic express or just with pro tools? How would I benefit from this hardware?

Hi,
I can't speak for the mbox1. But I own an mbox2 pro, which is a GREAT box.
It's also highly acclaimed by folks who have put it to more scrutiny than me.
Being made by Digidesign is, IMO, a quality mark in itself. Say what you want about ProTools etc. (I prefer Logic by far), but hi-def audio is what they know.
I just had to download and install Digidesign's CoreAudio drivers to make it work properly - no prob.
It's not poor just because it's been on the market a few years. But whether you should get the (oldish) mbox1 or get something newer, is up to you
Just my $0.02
Eivind

Is GarageBand iOS 2.0.1 compatible with Logic Pro 9.1.8?

I run Logic Pro 9.1.8 on a Mac Pro 1,1 (Snow Leopard 10.6.8) and GarageBand 2.0.1/ iOS (7) on the iPad2. The songs are built on the iPad, then opened in Logic on the Mac. This worked like a charm until recently when the iPad was updated w/ the new GB. Used to just click on the ".band" file, exported from the iPad to the Mac via iTunes, and it would open in Logic (the only audio software on the Mac), but now it asks me to save the file instead of opening it. Then when trying to open the newly saved GB version in Logic you either get a blank arrange screen or Logic crashes and says it needs to be updated.
9.1.8 the latest version of Logic Pro 9, so is it asking me to get Logic 10? If so, it would seem that I need a new Mac as mine is 32-bit and Logic 10 is 64-bit.
Does Apple keep the GB and LP versions concurrent? Meaning that the current GarageBand is compatible w/ the current Logic Pro? The least expensive solution might be to go back to the 8 track GB for iOS, but how can I do that? I do not have that purchase on my app store account any more as it was purchased from a different account that I no longer have access to.
I don't ever remember having to first save the file in LP9 and then check a bunch of boxes in the Advanced section when saving it, but this does work to open the old files (8 track version of GB iOS) . So, I tried again w/ the new GB files (16 track version of GB) and Logic crashed again and said the file was "created on a different version of Logic" please update Logic. With no more updates for Logic Pro 9, it wants LP 10? Which I can't do bc of the specs of my computer.
Your thoughts and ideas are welcomed and appreciated. Thank you.
Mac Pro 1.1 (June 2007)
2x Quad Core 2.66 Ghz Intel Xeon
16 GB RAM
(2) HD's
Audio Drive: WD Caviar Black
Logic 9.1.8
Snow Leopard 10.6.8
iPad2 w/ GarageBand 2.0.1/ iOS 7

Hi Lee,
Thank you. That is a great work around! Yes, where is 1.x that I paid for? Exactly! That would have helped immensely.
I tried to get Garageband iOS 1.x, but could not. Contacted Apple and they said I could book a service call w/ their technical department for about $30USD! For a $5 app that I already paid for?! Are they serious?! I don't even think (even after the $30) they could have done anything. I know, it was just a poor customer service rep and they are just following protocol. I even thought of trading my iPad to someone who hadn't updated their iOS. Then I should have seen the old GB (compatible w/ the old iOS 1.x) in the app store.
My work around:
- Bought a used 2008 64-bit Mac Pro tower on eBay ($700USD w/ shipping).
- Installed Mavericks and GB (free)
- Paid for Logic X ($200)
My 2007 Mac Pro is for sale on eBay! I won't get all of the $ back, but will get some.
Imported my first GB iOS 2.0.1 into Logic X - it wouldn't open! Yet another download was needed for compatibility. So, I just opened the iOS song in GB on the Mac Tower w/ Mavericks. Saved the file in GB then opened it in Logic X. I did download the 1 billion gigs for compatibility for LPX, but have yet to try it. So long as GB does the job, it only takes a few extra secs.
I now have access to LPX Session drummer, which is pretty cool. Sometimes your original beats can work better for the song, but session drummer can help w/ fills, mixing and "real drummer" feel sometimes. Now I combine my ideas w/ theirs. One can even take the orig iPad created drum track and use it as a loop along w/ Session Drummer (which can be a bit more of a live drummer feel).
I too write on the iPad when on the road then dump to the Mac Pro Tower when I get home. I had tried a MIDI device to dump the data from the iPad to the Mac. Didn't work. Spent hours researching which software to use for MIDI. Time is $ so I shelled out the dough. They got me! Sort of I didn't buy a new Mac. I'm selling a whole bunch of old studio gear, that I don't use anyway, to make up the difference in cost.
Thanks for your input. This is my 2 cents. I could write a book about this experience!

M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

Hello All!
I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
Please can someone help me solve his issue!
Thankyou!
Felix

I know many, many of us who are running things just fine.
I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
I personally, have on test here at the studios... 7 different Macs ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
Cheers..
Nigel

I have this issue, it tells me "the format of this file is not compatible with logic pro x, please load first into logic pro x version 7.2 or earlier to convert

I have this issue, nobody knows why this happen, please help, I was working for 2 days in that file

...and were there no backups made by Logic automatically?
Assuming the project isn't so badly damaged that this won't work...
Make a new project and save it as say, Temp project...
In Finder... Right/Control click on the original project itself and choose Show Package Contents... from the popup menu
Now navigate to the Alternatives folder and look inside any of the folders in there such as 00... for a Project Backups folder and inside that you should find the backups Logic makes automatically...
You will then need to copy the two files inside that backup folder over the same two files in the Autosave folder of the Temp project you created..... overwriting anything already there..
You may also need to copy over the Resources folder from the original project to the Temp project overwriting the original too.
Now open the Temp project in Logic and see if it works...
Failing all this.. then I hope you have learned the lesson we all learn at some point.. and that is to always make backups via one means or another... because its only a mater of time when and not if.. you will run into these kinds of issues..
Cheers..
Nigel

Is the Alesis MultiMix FW16 compatible with Logic Pro 7???????

I'm looking for a new interface. I was looking at either a MOTU 828 MkII, (but I need more mic pre's for recording drums on individual tracks), or maybe an Alesis MultiMix FW16. I would also like to be able to insert Compression to the mix prior to the A/D conversion. I guess I could run XLR to 1/4" to the Motu would although I don't know if that would work. I just need help, PLEASE!!

yea should be it uses core audio.

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Using Mackie Control with Logic Pro 7 and Yamaha O1X

I currently own a Yamaha O1x which is a mixer/control surface/audio interface that I use with Logic Pro 7. I am planning on selling the O1X and replacing it with the Mackie Control Universal as my DAW controller and using the Apogee Ensemble as my audio interface. I already have purchased the Mackie Control Universal and would like to begin using it instead of the O1X as my DAW controller, but while I am waiting for the Apogee Ensemble to be released I still need the audio interface capabilties of the O1X. The O1X uses Yamaha's MLAN protocol to connect to the G5. MLAN is a firewire interface that can transmit both audio and midi. Does anyone have a suggestion for a work-around solution so that I can use my Mackie Control Universal (which connects via midi cable) and only use the audio capability but not the control surface of the O1X via the firewire connection? I haven't been able to figure my way through this one and see if it is possible. I have already tried having them both hooked up at the same time, and the Mackie Control seemed to work fine but the audio on the O1X didn't seem to be connecting and functioning properly. I appreciate any help as I am anxious to use my Mackie Control.
Thank you!

You need to connect only the Audio and not the MIDI between your 01x and Mac. You can achieve this in mLan Graphic Patchbay-connect the cables between the Nodes in Audio part of a Graphic Patchbay, connect the Wordclock but do not make any MIDI connections. this way it should work as you want. the other way is to Make your regular connection from mLan Autoconnector and disable the MIDI ports that are dedicated to control the DAW by 01x by some freeware utility (01x uses port 1 for that...)
As this is quite 01x specific, please visit 01xray.com/forums where you will find more help, or send me PM.
As Apogee enssemble is expected to have great features, I would rather recommend the i88x instead of Enssemble (i88x has two Mic preamps-the best Yamaha produces (derived from Dm2000)VERY good converters (mLan is known for low jitter and it was tested with Rosseta by a mate from 01x forum who said (he tested it in store with other people) that i88x sounded better-may believe it or not...).The mLan Graphis Patchbay application allows you to patch connections between mLan devices and computer -very flexible. 01x already does almost the same as Mackie control and it is for almost the same price.... But maybe you are pi_ssed of waiting for new mLan drivers? I am just speculating....

Will my m audio Project Mix work with logic x?

Hi, just wondering if my M-Audio Project Mix I/O will work with Logic X. I am currently running Mavericks.

If it works with any other CoreAudio based app on your Mac.. it should work fine with Logic Pro X as the key is .. if it is compatible with your OS X version. Its not about compatibility with Logic Pro X at all in reality... as LPX uses Core Audio which is part of OS X.
So do you have it up and running in 10.9.2 and does it work with any other audio app? If so which one(s)?
If you haven't tried yet, you may be out of luck as the last driver update for your device was way back.. for 10.7.4.... and some people had issues getting to work under Mountain Lion, let alone Mavericks...
http://community.m-audio.com/m-audio/topics/project_mix_driver_update_for_mac_os _10_8_5_final_version_of_mtn_lion

Is New Mac Pro Compatible with Logic X

Im interested in getting the new mac pro. Is this compatible with Logic X plugins does anyone have it yet working with Logic pro. I have a Mac Pro 3.33ghz 6 core. Is this 10 times better or just a little. I already have good SSD drive so loading and streaming samples is lightning fast.
thanks

hi i have another question i don't know if anyone knows. in Logic X when I pen the mixing board the scrolling lags for a second and stutters lags for a couple of movements then it scrolls back and forth normally. but when I shrink the arrange window with the mixer to a smaller size it gets faster as I shrink the screen.
I have a HP 30" monitor hooked up by dual DVI cable. 60hz refresh rate. A GTX-680 2g Video Card.
My friedn has a imac 27" i7. I have a mac pro 3.33ghz 6 core. His mixing board does not lag. also copiny plugins is slow on mine. his did not lag.
is this because my monitor is older and using dvi insted of hdmi or thinderbolt?

Is the Canon Powershot S2 IS Digital Camera compatible with an ipod photo?

I'm going on a roadtrip to the northwest next month and was wondering if anyone knows whether the Canon Powershot S2 IS Digital Camera compatible with an ipod photo?

You cannot, with a PC or a Mac, transfer photos from a camera directly to the iPod. You need to download the images from the camera to your computer first, then move the pictures from the computer to the iPod.
Not quite sure about that - from the Apple Store (UK):
Simply plug the iPod Camera Connector into the iPod dock connector, plug your camera’s USB cable and watch your images make their way to the iPod, ready to view in a slide show!
Compatible with iPod with color display.
Not compatible with iPod nano.
Requires iPod software v1.1.
See http://www.apple.com/ipod/compatibility/cameraconnector.html for supported cameras.
Regards,
Colin R.

Is "Sony Cybershot DSCT300 10.1MP Digital Camera" compatible with the Sony 40m Marine Pack?

Hello, Is Sony Cybershot DSCT300 10.1MP Digital Camera compatible with the Sony 40m Marine Pack? Thank you for your help.

Hi squid10feetfish,
Welcome to the Sony Community!
The 40 m marine pack, MPKTHF, is the casing that is exclusively made for this unit. Any other units of the marine pack can't be used with other camera models as they are made specifically to fit the dimensions of the respective compatible units.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

Waves plug ins is compatible with logic x ?

waves plug ins are compatible with logic x?

Excuse me your name is Jan not Dan sorry ,got the 32 bit version it works perfect on logic pro 9 is there any chance to work at 32 bit in logic X ? thanks for your help rewards

Mackie onyx 1640i digital mixer compatible with logic pro x??

Similar Messages

Maybe you are looking for