Made large recording with web cam. too large for QT and VLC to handle.

how can i divide the file into manageable sized files? or some other option?

scratch that. streamclip was also overwhelmed...

Similar Messages

Any other choices for communication with web cam

Hi all,
I have wrote a JMF program that takes the images from webcam. However, it really depends on lighting. When lighting is not enough, my whole application hangs. In fact, I have installed the software provided together with my webcam, it works pretty good nomatter how dark it is. Therefore, I really hope you guys can share some experiences to me, or are there any choices, such as, C, C++, etc, that allows me to capture the images from webcam continously. I am tired about java JMF. Thx a lot.

To communicate with web cam, you can avoid JMF using the JavaTwain package http://www.gnome.sk
This package enables you to connect to your camera or scanner directly from a java application.
If you just want to see how Java Twain works with your scanner or camera:
- java (1.2 or higher for Windows, 1.3 or higher for Mac OS X) has to be installed on your computer
- a scanner or camera has to be installed on your computer
- download the trial package from http://www.gnome.sk
- unzipp it
- go to the examples directory of the unzipped package
- in Windows: doubleclick the runExampleShow.bat
- in MacOS:
- open the Terminal window
- change the working directory to the examples
- run .sh file (type ExampleShow.sh or sh ExampleShow.sh)
This will pop up the Twain Source Selection user interface. There, all your scanners and cameras which do have a twain driver should be listed. (About 90% of scanners and cameras on the market do have a twain driver for Windows, only a few do have a twain driver for MacOS.) Select one of them. The user interface of the selected scanner (camera) will appear. Confirm the scanning (you can set the scanning parameters first). The scanned image will be displayed in a separate window. To end the application, close that window.
Running different examples, you can test scanning with hidden UI, saving the scanned image, using ADF, ...
If there is any problem, do not hesitate to inquire about it at the technical support, email: [email protected] . I am the member of the staff :)
Erika Kupkova

How can i make trigger with basler camera GIGE 659x494 - 70 FPS and I/O terminal block

Hi all,
How can i make trigger with basler camera GIGE 659x494 - 70 FPS and I/O terminal block

Frank,
If you are wiring an isolated power output to the EVS you will need to apply a power supply to the terminal block. This is mentioned in the "wiring isolated power output" section of the EVS getting started guide located here. The guide references the EVS user manual which provides a pinout of the d-ub connector in table 2-11 of the manual located here. For more information on the camera settings you need to set on the Basler camera please see the user manual of the camera you refrenced here.
To provide power to the camera you can purchase a power cable for the camera. Rather than a power cable, since you want to also do triggering, you will want a Trigger and I/O Cable instead which is part number 779985-01 as seen on this product page. The I/O cable would allow you to wire the trigger lines to the terminal block as well as the power lines.
David A
National Instruments
FlexRIO Product Support Engineer

I changed my email address for my apple id but icloud still has old email adress and when I try to signout so I can sign in with new address it asks for password and then says invalid so I cannot delete the account to sign in with the new one! Please help

I changed my email address for my apple id but icloud still has old email adress and when I try to signout so I can sign in with new address it asks for password and then says invalid so I cannot delete the account to sign in with the new one! Please help

OK...now I appear to 'progressed' I changed my email address back to original on Apple id and then was able to delete icloud account. Apparently I couldnt do it as it kept requesting password when I entered passsword ( both old and new one, it wouldnt accept it as it had my old email address in ) It didnt do that on ios6 . Anyway I deleted account, but now I tried to login in with my new id/password and it says unable as already in use!!! More help needed please! Its a nightmare!!

HT4623 I have never had a passcode to lock my iPad. Now that I have updated it with IOS7 it is asking for one and is locked. How do I unlock this without having to reset the whole thing through iTunes????

I have never had a passcode to lock my iPad. Now that I have updated it with IOS7 it is asking for one and is locked. How do I unlock this without having to reset the whole thing through iTunes????

Unfortunately, if the iPad is insisting that you use a passcode, there is no way around it other than to restore the device using iTunes on a computer, or by erasing it in iCloud.com via Find My iPhone.
You could try resetting the iPad and cross your fingers and hope this is just a blip on the radar....hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.

Issues in ARM and LV
Can I use my custom board with LPC2378 processor with ULINK2 on Embedded module for ARM and LV.How can I create my elemental I/O vis or I have to use the existing Keil board vis. Confused. Please help.
I have LV8.6. Which ver of embedded module for ARM should I buy. Website shows combined price for ARM module and LV. But I already have LV8.6 so what is the cost of module.
Regards
Shradha

          If the processor of your development board is the cortex-M3 core, I think you do not have to buy keil board. Now, there are a lot of OS and emulator suitable for Cortex-M3.
          Operating system I am referring to is the real time operating system such as keil RTX,uCOS,FreeRTOS,CooCox CoOS and so on. CooCox CoOS is very new, you can get more information from http://coocox.org/ .
          Emulator or debugging tools such as ULINK2,st-link,Jlink,CooCox Colink and so on. CooCox Colink is also very new. You can download the Colink Plugin from here Colink Plugin .

Web pages too large

I just purchased a MacBook for the first time and I am having a problem with my web page being too large. I have to scroll almost half the page to read the screen. I have been unable to find a solution to fit the page to the screen. I have been unable so far to find this problem on this sight. Is this normal with Mac? (I hope not). If not is there a solution?

Are you saying that the size of the webpage is too large? i.e font size, text, etc.? Or the application window itself?

Sorry Web Page Too Large

I am not sure what is happening but since I have new software upgrade to OS 6 when I open a web page it takes a long time to load and then a box pops up with Sorry We're closing this page because it is too large to load.Any help would be appreciated.
Thankyou.
Solved!
Go to Solution.

jini01 wrote:
Ahhhh just as imagined. The great RIM has nothing to say here. Hey support the phones that you have sold to these people.
Hello,
Perhaps you misunderstood the EULA you agreed to when you signed up for these forums. These forums are not anything to do with formal support. These forums are not a user-to/from-RIM channel of communication. These forums are a user-to-user support community where volunteers try to help out other kind souls to the best of their ability. While RIM reps will sometimes drop by here, such is not to be the expected outcome of any communications on these forums.
All formal support starts with the wireless service providers and authorized resellers. They have the ability to escalate cases into RIM if needed, but the carriers have the responsibility for the front line support for all BB users. That's just the way the support model works.
Lastly, RIM didn't, as you say, sell any phones to anyone. All sales are handled via the authorized channels...and, yes, you guessed it...that's the carriers and authorized resellers.
Hope that helps.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Web cam too dark

The web cam on my Y50-70 Touch is too dark. I've tried adjusting the settings on the Settings menu but it has no effect. Is there some update or utility that can help me with this problem?

scratch that. streamclip was also overwhelmed...

HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

So it's not the Zoom feature? Open System Preferences Universal Access pane Seeing tab. Make sure Zoom is turned OFF.
If it's not that, then you may have the resolution set so that it is not optimal for the built-in display. Open System Preferences Displays pane Display tab. The optimal resolution is usually the one at the top of the list of choices.

Low memory warning with Web Cam

I've just installed a Web Cam pro on my wife's Sony laptop. The Creative Can Centre works OK and we can see the image but soon after the program starts a message comes up low memory. The lap top is running Vista. How to resolve this?

Hi i am using Windows 7, with webcam live! VF-0050 i manage to install the drivers, but when i load webcam center or msn it's just give me a blank screen with error low memory warning! How to solve the black screen and the low memory warning.

How do i take pictures with web cam

I have a hp 2000 windows 7 with a built in web camera and im trying to find out how to take pictures with my web camera. It only lets me use it on web sites.
This question was solved.
View Solution.

Hi,
There is a manual for it:
http://www.hp.com/ctg/Manual/c01455314.pdf
please also check one section on the following article:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01923517
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

BUG: Videos recorded with Lumia Camera can't be at...

In Lumia Camera 4.9.3.0 on my Lumia 1020 OS version 8.10.14219.341, videos recorded with the Lumia Camera software cannot be attached to MMS messages. It doesn't matter what size or length they are or wether they were recorded with the front facing or rear facing camera... they won't attach to MMS messages.
Instead, I have to load the Microsoft Camera app record the video with that, and that will allow sharing via MMS. It's a pretty annoying bug with Lumia Camera.
>>I was told to post this message to the nokia forums here after it was originally posted in the Windows Phone answer forums here.<<

Good day, adamz1977. We would like to know more about your concern. Are you getting any error message when trying to attach a video? Have you already tried uninstalling and reinstalling the Lumia Camera app? How are you trying to share it? Is it via Photos hub or via Messaging hub? Let's try isolating the issue. You may try updating the system apps. Go to Store > ... > settings > check for updates. If you haven't checked if there's an available update for your phone, here's how: Software Update for Lumia with Windows Phone 8. We look forward to your reply.

Captivate Video Recording via web cam?

Is it possible to do Captivate Video Recording via USB web cam? All I can see so far is about its ability to record screens and applications, but not do an actual video recording via a video camera input. Audio is no problem allowing you to insert audio from a file or do a live audio insert. Video however seems limited to insert from a file only. This would seem to imply you need a separate video recording application to capture video via a camera input, which is obviously disappointing if that's the case.

Thanks. Hopefully they will add this basic functionality to Captivate ASAP. It's a missing fundamental element. i.e. to be able to add video annotation to your slides. Lectora Publisher does it and so should Captivate in my view, given it's supposed to be among or overall ahead of the leading products. Seamless audio / video annotation is a very common requirement nowadays.

Tecra A10 With web cam

Anybody know which Tecra A10 model comes with a web cam & software to read business cards ?
Many thanks
1Sona

I agree with Mores. I think all Tecra A10 have a built in webcam.
You can compare between the models on the Toshiba website if you select the notebook model:
http://eu.computers.toshiba-europe.com

Made large recording with web cam. too large for QT and VLC to handle.

Similar Messages

Maybe you are looking for