Magic mouse stops tracking, Magic mouse stops tracking

Hi all
I have bought my magic mouse last year (it is about 1 year and 1 month so no replacement) now all of the mouse functionalities are working perfectly BUT the most important thing the tracking has stopped.
I have tried batteries other Mac and still nothing i have downlowsed a bluetooth analysis utility and it states that everything is just great but still no track of the mouse.
Thanks for all of your help.

Here is the Apple document that may help you ....
Troubleshooting wireless mouse and keyboard issues
Take particular note about distance from computer, interfering electrical apparatus and battery condition.   Check the green indicator light on your mouse. Is it on, flickering or steady.   Here are a few notes I have written about batteries ....
Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems.   Apple’s own brand, Eneloop and Energiser appear to be the best.
Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor.   I have seen reports that some Logitech mice vastly exceed this.    Apple may suggest more in their sales blurb but this is a realistic expectation.   The benefit (if you are organised) is that you can always have charged batteries available.   Regular batteries will give you between 25 and 35 days before they need to be replaced.
Note. Never mix old and new batteries or rechargeable and regular.
The notes above are based on my personal experience, not shutting down my machine and using it for around four hours per day.   Note.   Monitors do not always faithfully report battery strength, particularly the rechargeable ones.
When checking your mouse or keyboard batteries ...
Turn off the device.
Remove the batteries,
Clean the terminals both inside the battery compartment and the batteries themselves.
Replace or renew both batteries.
Turn on the device.   You should get a blinking green light if the device is paired.
Click the mouse to activate it. The green light becomes steady.

Similar Messages

Magic Charger Mobee for Magic Mouse doesn't work with Mac OS X lion Mountain

The Magic Charger Mobee for Magic Mouse Apple
with Mac OS X lion Mountain
makes connections overflows and stops the system work.
What could I do, other that disconnect Magic Charger?

When you say you cannot add the printer, with the Add Printer pane open, is the 6250 visible in the Default Add Printer view? If no then it could be the USB cable at fault and I suggest you try another cable.
If the printer is visible but the Mac fails to locate a driver when you select it then you may have to trash the contents of the BJPrinters folder (HD > Library > Printers > Canon) and then run the iX6250 driver installer again.

Hwo to "track the mouse position"

I m a java newbie, and need to write a small program to track the mouse position.
basically, it opens a small window, and tell you the current mouse x, y coordinate. when mouse moves, hte x, y changes...
by the way, how can i compile it to .exe file, after i finished coding.
i try this way, but so many errors.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class mouseWin {
public static void main(String[] args)
          protected int last_x=0, last_y=0;
          mouseMoved(MouseEvent e);
JFrame frame = new JFrame("Mike's Mouse");
JLabel X = new JLabel("x: " + last_x + "y: " + last_y);
frame.getContentPane().add(X);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
     public mouseMoved(mouseEvent e)
          last_x = e.getx();
          last_y = e.gety();

please help.
i rewrite the code, but still cannot get it work
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.EventListener;
public class mouseWin implements MouseMotionListener
public static void main(String[] args)
               int last_x;
               int last_y;
               last_x = 0;
               last_y = 0;
               JFrame frame = new JFrame("Mike's Mouse");
               JLabel X = new JLabel("x: " + last_x + "y: " + last_y);
          frame.getContentPane().add(X);
               frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
               frame.pack();
               frame.setVisible(true);
     public void mouseMoved(MouseEvent e)
          last_x = e.getx();
          last_y = e.gety();
          JLabel X = new JLabel("x: " + last_x + "y: " + last_y);
}

Stopping a recording after each track

I have an odd request...Is there any way to stop a recording after each track? Such that there are three tracks on a recording, after each track I would like the CD to stop. After it has stopped, I would like to be able to push play and move to the next track. That is, I put the CD in the player, push play, the CD plays track 1, and then stops; I push play again, and the CD begins playing track 2, and so on. I have Logic Pro and iTunes, which I have used to create the tracks and compile onto a CD. Using these can I create a CD with these parameters? Any advice would be helpful, and thanks in advance for your time.

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

How do I stop 1 track in a 3 track multi-track session???

Hi there,
I am trying to record 3 silmultaneous inputs, I have set up my pc with 3 seperate sound cards and it all seems to be working well.
EXCEPT for 1 thing, the tracks i am recording need to be stopped and started independently of one another, when I try and stop 1 track they all stop recording...
Does anyone know if I can do this and if so, what am I doing wrong?
Thanks
Heidi

qandaresearch wrote:
Does anyone know if I can do this and if so, what am I doing wrong?
No, you can't do that. Audition's multitrack screen behaves like a giant multitrack tape recorder, and like all tape recorders, it only has one transport. Basically what you have to do is not worry about it, and just record all three tracks simultaneously; it's pretty easy to get rid of the silent bits afterwards.

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Can I have my wireless mouse and the magic trackpad both active at the same time next to my computer?

Can I have both my wireless mouse and the Magic Trackpad active at the same time next to my desktop iMac?

Yes. I do. I use the Trackpad to make fine adjustments for video edits.

Lion won't recognize my mouse as a Magic Mouse

I have just completely reinstalled Snow Leopard from scratch and upgraded to Lion as well.
I have come to pairing my wireless keyboard and mouse. Both pair automatically but Lion doesn't recognize my mouse as a Magic Mouse so none of the Magic Mouse features (such as scrolling) work. Under System Preferences I do not see all the usual options under Mouse either.
I have tried deleting the mouse in Devices and re-adding it but it never recognizes it as Magic Mouse.

Solved!
Lion was automatically adding my Magic Mouse as opposed to be selecting it from the list of found devices when setting up a new Bluetooth device. I waited to select it from the listof devices and it now works. I hope this helps some others'.

Dock & Menu-bar stop responding to mouse move

Hello!
I've been having a strange problem for quite some time now. After some time of working on my mac the dock and all the menus (including the menu bar on the top of the screen) stop responding to mouse move. At the same moment also my "hot-corners" stop working. For example when I move my mouse over the dock the magnification does not happen and when I run my mouse over the menus they don't highlight. When I move the mouse to a hot corner which was attached to Expose or ScreenSaver start nothing happens there either. Whole system acts really unpredictable.
I tried killing Finder, changing resolution when this happened,... Nothing helps but a reboot, but rebooting machine so frequently is driving me a bit nuts.
Please, help!
Other details: OSX 10.5.6 (this has been happening from the start - through all versions), MacbookPro
Thanks in advance.
Y.

Ran Disk Utility off the DVD and repaired permissions and repaired the disk. Problems were found in both although, they appeared minimal. Despite that, the same issues where present when I woke it up from Sleep mode in the morning.
Whenever I hovered my mouse over the menu bar, the cursor would turn into the spinning beachball. The dock didn't freeze as it had done every time before, but if I clicked on an application it would become highlighted and stay that way without it actually opening. The opening animation never took place either.
Until some fix comes out, my next step will be checking to see what software I last updated before the problem started a few days ago and seeing if I can roll back.

Whenever I truy to load a picture or video file, it will stall until I start moving the mouse around. When I stop moving the mouse, it stalls again. I am running Firefox 4.0.1 and Vista

Any picture or video file I try to load just stalls (with the exception of sound which works OK). I move the mouse and it plays or loads. I stop moving the mouse it stalls again.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Pro L10: After using a wireless mouse, the touch pad has stopped working

Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?

Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse.

[59053] Usage Tracking stopped because the specified Usage Tracking table

Immideatly after server startup, I am gettting this log in the NQServer.log.
[59053] Usage Tracking stopped because the specified Usage Tracking table contained the wrong number of columns or a column with an inappropriate data type.
Any idea how I can find out which table needs update?
Thanks
-SJ
Here are the details of hte tables I have in the Usage tracking schema :
CREATE TABLE "RMI"."S_NQ_ACCT"
(     "USER_NAME" VARCHAR2(128 BYTE),
     "REPOSITORY_NAME" VARCHAR2(128 BYTE),
     "SUBJECT_AREA_NAME" VARCHAR2(128 BYTE),
     "NODE_ID" VARCHAR2(15 BYTE),
     "START_TS" TIMESTAMP (6),
     "START_DT" TIMESTAMP (6),
     "START_HOUR_MIN" CHAR(5 BYTE),
     "END_TS" TIMESTAMP (6),
     "END_DT" TIMESTAMP (6),
     "END_HOUR_MIN" CHAR(5 BYTE),
     "QUERY_TEXT" VARCHAR2(1024 BYTE),
     "SUCCESS_FLG" NUMBER(10,0),
     "ROW_COUNT" NUMBER(10,0),
     "TOTAL_TIME_SEC" NUMBER(10,0),
     "COMPILE_TIME_SEC" NUMBER(10,0),
     "NUM_DB_QUERY" NUMBER(10,0),
     "CUM_DB_TIME_SEC" NUMBER(10,0),
     "CUM_NUM_DB_ROW" NUMBER(10,0),
     "CACHE_IND_FLG" CHAR(1 BYTE) DEFAULT 'N' NOT NULL ENABLE,
     "QUERY_SRC_CD" VARCHAR2(30 BYTE) DEFAULT '',
     "SAW_SRC_PATH" VARCHAR2(250 BYTE) DEFAULT '',
     "SAW_DASHBOARD" VARCHAR2(150 BYTE) DEFAULT '',
     "SAW_DASHBOARD_PG" VARCHAR2(150 BYTE) DEFAULT '',
     "PRESENTATION_NAME" VARCHAR2(128 BYTE) DEFAULT '',
     "ERROR_TEXT" VARCHAR2(250 BYTE) DEFAULT '',
     "RUNAS_USER_NAME" VARCHAR2(128 BYTE) DEFAULT '',
     "NUM_CACHE_INSERTED" NUMBER(10,0) DEFAULT NULL,
     "NUM_CACHE_HITS" NUMBER(10,0) DEFAULT NULL
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "RMI_DATA" ;
CREATE INDEX "RMI"."S_NQ_ACCT_M1" ON "RMI"."S_NQ_ACCT" ("START_DT", "START_HOUR_MIN", "USER_NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "RMI_DATA" ;
CREATE INDEX "RMI"."S_NQ_ACCT_M2" ON "RMI"."S_NQ_ACCT" ("START_HOUR_MIN", "USER_NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "RMI_DATA" ;
CREATE INDEX "RMI"."S_NQ_ACCT_M3" ON "RMI"."S_NQ_ACCT" ("USER_NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "RMI_DATA" ;
CREATE OR REPLACE FORCE VIEW "RMI"."NQ_LOGIN_GROUP" ("LOGIN", "RESP") AS
Select DISTINCT USER_NAME as "LOGIN", RUNAS_USER_NAME as RESP From S_NQ_ACCT
Edited by: SachinJ on Aug 3, 2009 7:54 AM

Compare the S_NQ_ACCT table you created with the table structure defined in the rpd under the physical layer database object "Oracle Analytics Usage".

Stop adding concert level aux tracks every time I choose a track send

Howdy all,
Is anyone else having this annoying problem?
I am working in a patch, and I want to add an effect, let's say a delay. So I create a new patch level aux input channel strip with a delay insert and set the input to bus 1.
On my audio channel (that I want delay on) I use send slot 1 to send to bus 1. As soon as I do this, Mainstage creates another aux channel strip with input of bus 1 at the Concert level!
Then I have to switch to the concert level and delete it. I would like a way to turn off this behavior, but I haven't been able to find it.
Any suggestions out there?
thanks!
Brian

Well, I've tried both of those and that's where the problems arise.
If I do "Track -> Create Multiple..." I get the error message "No more tracks available".
If I create an Audio Object in the Environment, double-click on its icon to transform it into a channel strip, and then try to assign the desired channel, only the channels that are already taken appear in the pull-down menu. If I go back to the Arrange Window and choose "Track -> Create" a new track is created given the same name and linked to the same Audio object and channel as the previously last Audio track. Going back to The Environment I still only have the same channels as before to choose from.
In GB2, in Cubase and in Sonar all you have to do is create a new track and choose whether you want it to be an Audio track or a Midi track. I just don't get why it has to be so complicated in Logic?
What am I doing wrong?
...tt

Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries.

Opinion on Mighty Mouse & Original Apple Bluetooth Mouse

I just received my bluetooth Mighty Mouse today and I have to say it's an excellent mouse!
Pros:
Compared to the original Apple Bluetooth Mouse, this one is lighter (much lighter). It also tracks better than the original Apple Bluetooth Mouse. My desktop is a piece of grey plastic and with the original mouse, it was not able to track at all. With the new wireless Mighty Mouse, it works just fine!
I also love how one can zoom in by control-scrolling. Excellent feature!
Almost everything works well.
Cons:
Like others have said before, the one minor complaint is the side squeeze buttons. Only if the squeeze buttons were just slightly less tight. But I would not say this negative is any reason to not get the Mighty Mouse.
Also, unlike the original bluetooth mouse which has a slider to adjust the pressure of the click button, this one does not come with that feature. Not a big deal, nevertheless.
Good job, Apple!

It's not for any help, but me too have the same problem.
My mighty mouse, lose connection in a random way with my MacBook Pro 17" Unibody.
I've an iMac at home, with another mighty mouse, so I try to exchange the two, but any one of the two mouse work right with the iMac and have the same problem with the MBP.
Maybe for 1/2 day, there is no problem, and after that in an hour the lose connection happen 2/3 times.
I try like you to delete the .plist file and reset PRAM but the only difference is that now the bluetooth icon in the menu bar correctly shows the three dots of the connection, but as always at random, the mouse stops working and the pointer remains stationary on the screen.
The only solution is to manually disconnect and then click a button on the mouse to reconnect.
My only hope is that with the arrival of Snow Leopard and the next "clean installation" the problem disappears.
I'm sorry can't give you any help.

Magic mouse stops tracking, Magic mouse stops tracking

Similar Messages

Maybe you are looking for