Mail 4.2 on Issues after MacOSX10.6.3 update

Software update updated Mac OSX from 10.6.2 to 10.6.3. My comcast.net outgoing server stopped working. After troubleshooting with comcast chat online, found out that the Apple updater had somehow reset the outgoing SSL port to 995. Reset the port as per comcast spec. Then outgoing started working and IMMEDIATELY INCOMING on the comcast.net account only failed permanently. Comcast online chat again. Tried several things nothing worked. Comcast asked to set incoming to use SSL and set port to 110. Could not do that. So dropped the account, added new account, setup manually in the create new account DLOG, setup ports and ssl correctly. Now the incoming mail worked. But outgoing stopped. Checked ADVANCED tab in Prefs. It had reset outgoing port to 995 again. Reset that to 587 per comcast. Now outgoing worked and immediately incoming stopped. This is a serious bug.
Apple Advanced tab DOES NOT HAVE SEPARET SETTINGS FOR SSL ON INCOMING AND ON OUTGOING SERVERS. The Pref interpretes ssl port any ways. sometimes as incoming port, sometimes as outgoing port, unpredictably and badly.
Does anyone know how to fix this? Until it is fixed I cannot use my comcast account. In fact, in order to send emails from my home or work (both use comcast for internet), I have to ensure that the outgoing SSL port for comcast server is set to 587. It does not seem to stick. This is a major issue!

I'm here troubleshooting this same issue for my Parents. They had been on tech support with Comcast who wanted it changed from 995 to 587. Whatever other issue they may have had, I changed it to 110 and everything is great. That happens to be mine as well, but with another email provider I didn't even know if that would be worthwhile.

Similar Messages

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Is there any fix for the bluetooth connectivity issue after most recent OS update?

Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

IPad2 Issues after iOS 8.1 update

iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update. nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't respond.
photos - (which I use daily to show clients examples) will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos on my iPad2
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
Overall - the touch screen is glitchy since the iOS 8.1 update. It was slow after the iOS 8.0 update but has become almost unusable after the 8.1 update.
I cannot afford to purchase a new iPad. And I really need to find a way to make this one work.
I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
Any ideas would be appreciated   Thank you in advance for your help
Deborah

zooga wrote:
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again? I've read a few posts that this may be a workaround for that issue.

Display Issue after 10.9.2 update

After updating my Macbook Pro with Retina to 10.9.2 -- My display flickers for a second after sleep and or blank screen and then goes back to normal. Has anyone else been having display issues after updating?

Yes similar problem here: I have a MacBook Pro, 15 inch Retina, Mid 2012, and when I connect a secondary display via HDMI (and also HDMI-to-Thunderbolt) then the external monitor becomes the main display.
I have not figured out on how to switch back to former settings. My guess: it's a bug. A quick search confirms that many others have secondary display issues since 10.9.2
(Steve would have fired those lazy punks, who failed to do sincere testing before release …)

How i get by with the sleep, pause issue after 1.0.2 update

ok. i'm sure you guys are aware of the ipod sleeping/pausing issue after updating your ipod to 1.0.2. my ipod will pause whenever it is in the jensen dock station and the green battery indicator shows up. whenever i use the dock or remote to unpause the song, a few seconds later, it pauses again. so instead of using the dock or remote to play, unpause, whatever, i connect the ipod to the dock and use the wheel to navigate and 'only' use the play/pause button on the ipod itself to kick off the playing of music. if i go back to the remote, the ipod pauses. if i only use the menu and play/pause button on the wheel, my songs do not pause. it sure was nice using the remote before 1.0.2. i mean, it did come with the dock for my remoting pleasure but alas, i shall wait on the next update. hope this helps someone.

I will have to try that... I took my iPod to work today and plugged it into my JBL docking station and it was skipping. I did notice it seemed to go to sleep more often when I used the remote... There's a whole other forum on this maybe you could check out too. But it's really annoying and I hope Apple comes out with a fix soon! I will definitely try to use the iPod wheel tomorrow and not the remote.

Massive battery drain issues after the latest software update - phone hot

After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?

Is the device trying to sync all your photos with the cloud?
This is what I would do.
Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly. Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
Good luck.

Satellite 100-192: Issues after the latest MS update...

Satellite 100-192.
After the latest MS update I first had the problem with the Realtek sound card driver. I solved it by applying the patch MS provided.
Now the problem is that the disc cleanup utility does not launch. Anybody any idea?

I just found out that my disc cleanup utility would not work because of a free program called Photo Toolkit. Although it is a nice little program to quickly edit photos, apparently it causes such problems when it is loaded.

Mail, Keychain & Disk Utility Issues After Install

My clean install of Leopard seem to go fine. After restart it wanted to grab an Apple Remote Desktop update, I believe, via software update. Re-installed clean copies of further mac software and known Leopard compatible 3rd party apps.
My problems started to appear when I used migration assistant to transfer 2 accounts from my 10.4.10 backup. Both accounts went over, but on one the mail upgrade process consistently failed and on the other the keychain seemed to be of no use.
All's fine now, I manually imported the errant mail acount and just started with a fresh keychain on the other offending account. I know the backup was sound as I subsequently used it to restore a Tiger install as a fallback on another disk.
My last issue appears every-time I run Disk Utility to verify and repair permissions. I get the following text displayed part way through a verify and or repair.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
The verify/repair completes and I can quit Disk Utility. I'm presuming this is as a result of the early software update Leopard wanted to perform and the current shipping version of Disk Utility has no idea of the desired permission state of this file?
Was just wondering if anyone else had experienced any of the above or had any explanation?
Hope you're all having more fun than headaches with Leopard.

Nerowolfe,
I have installed Leopard and have had nothing but problems as well. Perhaps you can help me. I am ready to roll back to Tiger. These are just a few:
1. I cannot mount my external firewire drives. I have separately tested each and they work fine, I booted with the Tiger disk and they mounted fine, I reset the firewire port and when I connected them they mounted on my desktop, but not in the finder window and when I tried to open one, it just hung. I have been unsuccessful after many attempts to mount one of them with Leopard.
2. I appear to get random hangs. I have a 160GB hard drive and 2GB memory. I have 42 GB space left on the hard drive....yet I continue to have random hangs, especially when I try to open disk utility
3. Spotlight just does not work, period
4. I keep finding locked folders. Right now my CS3 is locked and even after going into get info and unlocking it, it just locks back and I am unable to open the application. I am a photographer and have been unable to do any work for the past 2 weeks while I am messing around with my computer. Now I have Christmas photos to sort and can't access the photos on the external drives or even open CS3
I have searched the forums, tried many of the recommendations, but nothing is working for me....perhaps since you have been successful you could give me a hand with these issues.
I wait for help.......
Other than that, how do I uninstall Leopard and reinstall Tiger????

Mail Enabled Public Folder Issues after migration online

Hi
We have recently migrated our Legacy (Exchange 2010) Public Folder Infrastructure to Exchange Online - we have a hybrid setup, SSO and DirSync.
We initially had an issue where some of our mail enabled public folders had lost their link with the associated MailPublicFolder objects and as such could not receive email.
We resolved this issue ourselves however we are now experiencing a different issue which i believe should be easily resolvable however this isn't the case at the minute.
The issue is that when a user emails a Mail Enabled Public folder Exchange online is attempting to relay the email back to our onPrem servers. This is occuring for the bulk of our Mail Enabled Public Folders - we have ~1200 of these. The only
folders that are working as expected are those that had the initial issue above and for which we had to remove and re mail enable these folders. We also had to recreate any secondary smtp address for these folders. This accounts for 88 of our total
MEPFs.
I have checked the attributes on the MailPublicFolder objects for those that are not working and those that are functioning as expected. The only difference in these that I can see is that the MEPFs with the issue have a value set in the ExternalEmailAddressAttribute.
I have tried to programatically set this value to $Null however i receive the following error:
The external e-mail address $null is not an SMTP e-mail address.
I have also tried the following : set-mailpublicfolder -Identity "MEPF"-ExternalEmailAddress "<not set>"
with the same resultAttempting to use the following syntax -externalemailaddress @{remove=$oldAddress} returns the following error:
Cannot process argument transformation on parameter 'ExternalEmailAddress'.Cannot convert the "System.Collections.Hashtable" value of type"System.Collections.Hashtable" to type "Microsoft.Exchange.Data.ProxyAddress".
At present the only fix that I have for this is to take a copy of the email addresses for an affected public folder, Mail disable it, wait for the object to be cleared, re-enable the public folder as a mail public folder and then re-add the email addresses.
This is ok on an adhoc basis but not for the ~1200 folders that are affected. Especially when from what i can see it should be relatively straightforward to resolve this with a simple PowerShell script.
I do have a case open with MS for this but I am hoping that somebody here can help also.
Thanks
Joe

Ok so i fixed it myself.
The thinking here is that the ExternalEmailAddress was set using the Primary SMTP address while the Public Folders were on premises.
In order to get the required information we ran a script to export all the MailPublicFolder objects which had a value in the ExternalEmailAddress attribute. We exported the Name, ExternalEmailAddress and GUID
We then ran a second script to export the Identity, MailRecipientGuid from Get-PublicFolder -recurse.
The MailRecipientGUID is what ties the Mail Enabled Public folder to the MailPublicFolder object.
Using Excel I then matched the two up and created a csv file with the Identity Attribute from the get-PublicFolder command and the ExternalEmailAddress Attribute from Get-MailPublicFolder.
The following script then used this csv file to first Mail Disable the Public Folder, then Mail Enable the Public Folder.
Once these steps have been completed the final stage is to add the SMTP address back in to the Public folder.
To do this it is necessary to retrieve the new MailRecipientGUID and use it to return the MailPublicFolder for the Set-MailPublicFolder command.
I was happy to use this script after i tested with a small subset of the data. It is provided as is with no guarantee that it will be suitable for you to use and any use of this script is at your own risk.
Script to Automatically fix brokenn Public Folder Objects
Created By: Joe McGrath
Created On: 18/02/2014
$Path = "C:\PublicFolders.csv"
import-csv -Path $Path | ForEach-Object `
Disable-MailPublicFolder -identity $_.Identity -Confirm:$False
Write-Host "Broken Public Folders Now Mail Disabled"
Write-Host "Waiting for commands to be fully processed online - the script will continue in 5 minutes"
Start-Sleep 300
Write-Host "Re MailEnabling Public Folders"
import-csv -Path $Path | ForEach-Object `
Enable-MailPublicFolder -identity $_.Identity
Write-host "Broken Public Folders now enabled"
Write-Host "Now waiting to allow online service to catch up - script will continute in 5 minutes"
Start-Sleep 300
Write-Host "Updating email addresses for broken public folders"
import-csv -Path $Path | ForEach-Object `
$NewPF = get-publicfolder -identity $_.Identity
Write-Host $NewPF.Identity
Write-host $newPF.MailRecipientGuid
$EmailAddresses = $_.AdditionalEMailAddresses
$NewMailPF = get-MailPublicFolder -resultsize unlimited | Where-Object {$_.Guid -eq $NewPF.MailRecipientGuid}
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddressPolicyEnabled:$FALSE
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddresses $EmailAddresses -EmailAddressPolicyEnabled:$FALSE
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddressPolicyEnabled:$TRUE
$EmailAddresses = ""
Write-Host "Completed!"

Mail.app issues after 10.5.4 update

I updated to 10.5.4 today and now mail.app changes certain symbols in links that show up in emails. I
pasted a link to a .mac photo album of mine and the # changes to a %23 when the link is clicked on or
copied and pasted into a web browser....
any thoughts?
Message was edited by: brenodo
Message was edited by: brenodo

FWIW, from RFC 3986:
2.1. Percent-Encoding
A percent-encoding mechanism is used to represent a data octet in a
component when that octet's corresponding character is outside the
allowed set or is being used as a delimiter of, or within, the
component. A percent-encoded octet is encoded as a character
triplet, consisting of the percent character "%" followed by the two
hexadecimal digits representing that octet's numeric value. For
example, "%20" is the percent-encoding for the binary octet
"00100000" (ABNF: %x20), which in US-ASCII corresponds to the space
character (SP). Section 2.4 describes when percent-encoding and
decoding is applied.
pct-encoded = "%" HEXDIG HEXDIG
The uppercase hexadecimal digits 'A' through 'F' are equivalent to
the lowercase digits 'a' through 'f', respectively. If two URIs
differ only in the case of hexadecimal digits used in percent-encoded
octets, they are equivalent. For consistency, URI producers and
normalizers should use uppercase hexadecimal digits for all percent-
encodings.
What are some specific URLs Mail is now breaking?

Mail.app and attachments issues after security update

Hi there
just installed latest security update (via software update) and now when i try to attach any file to an email, I get the spinning beach ball.
have tried rebooting and zapping the pram
anyone experienced similar or have an idea what might have happened?
cheers
ben

Hi ben.
This could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

Mail fails to import messages after 10.8.5 update

After the update Mail fails to import my messages and then quits.
First screen says: Welcome to Mail. To use the new features your existing Mail messages need to be imported....
Then when I click continue it says: The import failed. An error occurred during the import. Make sure you have available space in your home folder and try again.
I run mail from inside the container (MacOS folder) and here's what it reads:
Last login: Mon Oct 21 22:39:50 on ttys001
/Applications/Mail.app/Contents/MacOS/Mail ; exit;
Gustavos-MacBook-Air:~ calazans$ /Applications/Mail.app/Contents/MacOS/Mail ; exit;
2013-10-21 23:03:45.907 Mail[778:707] Using V2 Layout
2013-10-21 23:04:43.483 Mail[778:9617] Copy from /Users/calazans/Library/Mail/V2/MailData/Envelope Index to /Users/calazans/Library/Mail/V2/MailData/Envelope Index-26 failed with 10: not an error
logout
[Process completed]
I have already reinstalled combo 10.8.5
I have already booted on recovery console and repaired permissions
I have already installed the Supplemental update 10.8.5
I have created another standard user and inside this new account Mail will work perfectly.
Nothing worked so far. Cherry on the cake : I have a message saying I have a recall on my MBAir SSD drive.
Please advise on how to solve this issue !
Cheers,
ZChef

Intermediate answer: The app launched correctly and the import process has started.
It is taking ages though. Over 3 hours for around 30K messages.
The message count sometimes gets stuck for 20-30 minutes or so and then starts counting again...
There are ~5K messages left to be imported. I'll let you know if it goes ok.
Stay tuned for the next and hopefully last episode.
Cheers,
ZChef

Safari Java script issues after OS 3.1 update

When after opening email via a microsoft exchange server on iPhone safari, if I select reply and input text none of the "Buttons" work; reply - close -reload. it is as if the page is now stuck there. Did not have this issue with microsoft exchange mail page prior to this os update (it worked quite well in 3.0.1)
has anyone else noticed this issue?

I've noticed similar issues since 3.1 - We use a web based work order system that I access locally via VPN at 192.168.1.xxx - Since upgrading to 3.1 safari crashes consistently after hitting the login button. I downgraded my 3G back to 3.0 and it works again. Also, I noticed that safari for Windows crashes at the same spot. Firefox and IE both work fine. Seems some updates to safari have caused it to be incompatible with sites that once were compatible??

Mail not working at all after 10.9.3 update

Does anyone have a fix for this issue? I have tried reinstalling Mavericks as a whole
and Mail still isn't working. I've also tried zapping the pram and repairing disk
permissions with no luck. I can use webmail but I really need to access my
desktop Mail. When I open the program is it is grayed out across the top of
the screen and no windows come up at all. If I click any of the menus they turn
black and I can see into all of the drop down menus but a lot of the items are
grayed out like "new viewer window". If I want to quit Mail, I have to force quit it.

Before we move you to the new User, let's try nuking files used by Mail and see if we can get Mail working in your User.
System Preferences > Internet Accounts > Delete all accounts.
Go to your User's Library folder. (if you don't know how to find, see this link.)
Rename Mail to MailXX
Go to Containers in the User's Library folder. Delete the com.apple.mail folder.
Go to Preferences in the User's Library folder. If you find any com.apple.mail.plist files, delete these.
Log out under the Apple in the Menu bar
Log in
Open Mail. Add one account at a time and make sure it is working before adding additonal acounts.
If you have POP account you can import the "On My Mac" folders from the MailXX folder.
If this fails, we'll move you into the new User.

Mail 4.2 on Issues after MacOSX10.6.3 update

Similar Messages

Maybe you are looking for