Mail App no longer working after 2.0 upgrade

I upgraded to 2.0 on my IPhone Edge and now my mail application no longer works AT ALL. If I try to open it, it simply shows me a blank mail screen, waits for a few seconds and then returns to the home screen. Strangely enough, I have been able to send email photos using the camera application.
Email is the most important application for me on the iPhone! Has anyone encountered this problem? Is there a fix available?

I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

Similar Messages

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • Most of my apps do not work after 3.1 upgrade

    Most of my apps do not work after 3.1 upgrade. I have done a softboot 2 times and they still willnot connect.

    Are you running the current version of the 3rd party apps on your iPhone - have you checked for app updates with iTunes on your computer?

  • Brand new IPOD Touch Apps no longer work after upgrading software

    I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
    Message was edited by: 2009 IPOD TOUCH

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • The Mail app is not working after Mavericks download and recent 'fix' for Mail

    The Mail app won't start after upgrade to Mavericks, and needs force quit to close spinning pinwheel. The recent fix Apple offerered doesn't help. What are my options? Thanks

    I am also getting same problem...................anybody please help.

  • Apple mail.app doesn't work after joining google+

    I use apple's mail.app to manage my multiple emails. on my main personal gmail i joined google+. ever since joining google+, mail.app no longer imports any email from that account. i can still send email through mail.app but no new received emails import into mail.app
    any help resolving this issue?

    I found some solutions I find unacceptable in this thread:
    http://discussions.apple.com/thread.jspa?threadID=1596183&tstart=0
    For some people just restarting the phone seems to fix it. For others they have to do a complete factory reset and set up the phone as a new phone it appears as if something is corrupted in the backup, so restoing from backup will bring back the same issue.
    This stinks because it means that you lose all your backed up information (except calendar and contacts, which are stored separately)
    I'm still looking for an alternate solution.

  • IPhone 3GS apps don't work after 4.3 upgrade

    Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

    I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

  • HP OMEN Control Software No Longer Works After Windows 10 Upgrade

    HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

    I just purchased a new 2015 refurbished PC.  It worked great with Windows 8.1.   Upon installing Windows 10, The Omen control did not work as well as the fan.  Really - hardware failure.  Give us a break.  So, I went back to Windows 8.1. Also this year, I purchased an Envy X2.  This PC included a bluetooth keyboard that kept detatching.  Again - REALLY, the keyboard doesn't work.  That's a pretty important part of the PC.  I searched the forum for answers and all I found was the same old line that HP was working on it.  I found meesages over a year old that had this same  problem. So, back it went to Best Buy.  I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO.  Why - because they had to know about this issue alrady for quite a while.  And, they did not fix it.  I really hope they prove me wrong.!! I will give them 1 more week to fix it.  After that, the PC will be returned.  And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360.  To my amazement, I am even considering a MacBook Pro.  Funny thing - the Spectre X360 is supposed to be a great laptop,  But, Microsoft was heavily involved in the design process.  That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess.  TImes like these are opportuniies to win over customers or loose customers to the competiion.  I really want to keep this PC.  It is by your response to this problem that will determine the outcome.

  • Mail App no longer working

    Last night Mail was working perfectly, as it has for many years. This morning not working. Nobody touched my computer. I did not Install or Delete anything. Did NOT make ANY changes to anything at all.
    I use DeamHost for my Web Host and E-mail Service. I have contacted DreamHost Tech Support three times today already. I'm in the Chat Room again, but they cannot help me. They have no clue what is wrong.
    I've tried their suggestions to Reset the Password several times. Still Mail is not working.
    I even set a Different Password for each E-mail Address, but still not working.
    > I can send myself a message from my Mail App and receive it in my Mail App, BUT I cannot receive E-mail from somebody else to my Mail Application.
    > Sent a Message from both Hotmail and Yahoo to my Mail App, but did not receive either message.
    I really need to Resolve this Issue soon ...... I depend on my Mail App for All of my Important E-mail (Business, Familly, Friends, Personal)
    Thanks.
    -- Jim

    Finalll Resolved the Issue ... !!! As I suspected, it was something incredibly Simple .... !!!
    To the right of each E-mail Account in Mail, there was a "Tilde" sign to the right, indicating that there is something wrong with that E-mail Address.
    Finally, DreamHost Escalated my Issue to a higher-up Tech Support. After trying many things, most of which I had already been trying with other Techs all day long, finally the Tech told me to right click on the Tilde, and choose
    "Take Account Online"
    which worked for five of the accounts, but still had issues with the last account, which finally got working.
    So what could have been the cause for this Problem to Happen?
    I know that somebody did hack into my E-mail Account, because the first Tech this morning gave me some of the characters to my Password (very long Password), but those characters did NOT match up with my Password!!!
    Has anyone run into an E-mai Hack like this one ... ???

  • Mail app has stopped working after 10.9.4 update on July 4, 2014

    Mail is totally dead.  It does not connect to the internet.  Each of my email accounts has the exclamation triangle next to them.  No new peripherals or devices or USB connections were added after the update.  The system worked before the update, and the same system stopped working (Mail app so far) after the update.

    In your opinion Apple was doing a garbage job, when in fact it was Intego that trashed your Mac. That's all it is capable of doing.
    But now I have no virus protection.
    This is a common misconception. OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple. Ill-conceived "anti-virus" garbage convey no benefit and as you found out, can simply prevent your Mac from working as it is designed to work.
    Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Java can be disabled in System Preferences.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
    Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • Android remote iTunes app no longer works after 10.5.2 upgrade.

    Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine.  After this upgrade, my tablets no longer show up as "devices" in iTunes.  Am I the only one to experience this?

    Thanks for your replies.
    I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
    My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
    I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
    Thanks,
    Danny

  • Installed Apps No Longer Work After 3.1.3 Upgrade

    Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
    I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
    Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
    I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
    Any information would be appreciated...
    Thanks for your time...

    TainoV2 wrote:
    I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
    Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
    Message was edited by: DaVBMan

  • Mail search no longer works after 10.7.2 upgrade

    The search field in the upper right hand corner no longer returns any results, from any mailbox, regardless of the text I type in.  This was working fine until I upgraded to 10.7.2.  I absolutely rely on the search feature as my mail messages are a wealth of information for me.
    Help!
    Brian

    I've managed to get it working after trying the following:
    1. Used Disk Utility to repair permissions on my main drive
    2. In Terminal used the comand "sudo mdutil -v -i on /"
    That tells spotlight to turn indexing on for that drive.
    3. Did a restart
    I'd recommend trying the permissions and a restart first and if that doesn't help then try the command line fix.
    The first time I ran it without -v so got no feedback on what it was doing. Stopping it and trying to do it again gave me the message "Error: Index is already changing state.  Please try again in a moment." After the restart it now says:
    Indexing enabled.
              Scan base time: 2011-10-19 07:40:10 +0100 (60 seconds ago), reasoning: 'scan not required - avoided catchup scan'
    Now mail is back to how it was before the 10.7.2 update, happy days.

  • Ip camera app no longer working after iphone was replaced

    my wife has an iphone 4s. She accidentally had it in her pocket and put those clothes in the wash machine and fried her phone. we used insurance to replace it and restore her data. 
    i have a foscam FI9826W running app version: 1.4.1.9 and system firmware version: 2.11.1.10 that we have setup as our baby monitor/camera.  i have two other ipads and my iphone 5 configured to access the ip camera over my local network via wifi.
    the apps i am using on all devices are baby monitor by tiny solutions & live cam pro.  both of these apps work on all IOS devices except for my wifes replacement iphone she just got.  Her previous iphone 4s that ended up in the washing machine worked perfectly fine with these apps before it got wet.  The specific problem we are having is my ip camera is a PTZ camera.  all IOS devices are able to PTZ the camera without problems except, yep you guessed it, My wife's new 4s.  we can connect to the camera, see & here everything just fine, the we cannot PTZ the camera.  i have deleted the camera config and re added it on both apps, result no luck. i deleted the apps and reinstalled them then added the camera config back but still no luck. i have restored the phone to factory defaults, and then downloaded those two apps, configured the camera but still no luck. 
    4s is running 7.1.2
    app versions:
    livecam pro 3.9.5
    baby monitor 2.8.4
    internal camera on http: using port 88
    it has a wired Ethernet connection to my home router
    home router is an airport extreme running version 7.6.4 upstairs. and a Unifi AP running version 2.4.5.2077 downstairs. Currently all my IOS devices are connected to the Unifi AP. i have removed her device and had it re associate to the wireless network but still no luck.
    At this point i am stumped. i personally think it is the replacement phone, but need some more evidence to back up my theory so we can call support to hopefully get it replaced again.

    I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

Maybe you are looking for

  • How do I reduce the file size of a photo

    I need to reduce the size of a photo from 1.7MB to 50 KB how do I do this.

  • Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4

    Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4 Question: We are experiencing some major errors with printing to our Epson Stylus 9800 Pro. Some of our large files are spooling about 16K, then crashing Photoshop. Sometimes we are gett

  • How do I create a subaxis in DIAdem GRAPH using an autosequence?

    I am creating graphs in DIAdem REPORT using an Autosequence (3 graphs and text). This is to prevent anyone from changing the format of the report, which is why I am not simply loading an existing layout. My question is how do you add a sub-axis to a

  • How to disable frm messages in oracle forms

    Hi, I am getting a form error, FRM-41830:List of values contains no entries. whereas I dont want this message to be displayed instead i want a user specified msg like "No entries for specific location!".. I have even tried using, :system.message_leve

  • JavaMail supports SSL: True or False?

    Hi Guys, this is my first time here. :) Btw, I have questions: 1. Does JavaMail really support SSL or not from the original package? Cause from the FAQ, They said it's not. But i've read some examples where there is a class imported from javax.net.ss