Mail don't close

My Mail app don't close, can i resolve this?

I just ran to the same problem and was able to find the solution under this link
http://discussions.apple.com/thread.jspa?messageID=9430823&#9430823
Hope this helps

Similar Messages

Mail App Crashes / Closes

My Mail App crashes and closes every time I try to access it. I can open the app and it will begin to check the mail then it closes. It will not let me do anything in the short time it is open. I have used the account for months without issue. The App says I have 25 new emails and does briefly show my new messages. I have deleted and recreated the account with no luck. I have gone online and removed all emails from the server so no incoming mail would be coming in and then recreated the account on the iPhone. I have powered down, powered up. Nothing seems to resolve this issue and my mail app has been rendered useless. I've done way more then the obvious to resolve this... Any Ideas???

I found this thread and though thank god I am not the only person with this problem.
My .mac Account works fine. However my Demon Account which has worked fine bombs out within seconds. It was working fine for the first week until this evening.
I have done a reset as discribed,
I have deleted the demon mail account on the phone and done a reset. reset up the Demon account and still get the same problem.
Then Tried; deleted the Demon mail account on the phone and done a reset, turned the phone off completely, Done an iTunes Restore, turn the phone off and back on again and then re-entered the account details.
Still have the same problems. I can't remove the stuff of the email server because I need to keep stuff there.
Can anyone offer some advice?

Com.sun.mail.imap.IMAPFolder close

Hi everyone,
We are using BMC Remedy Email Engine with javamail function.
Why is the message of ''com.sun.mail.imap.IMAPFolder close' message is indicated in stderr.log file' indicated? BMC and we don't know the reason at all. If someone knows, could you please teach us the error cause?
The detail is below:
2008/10/07 1:16:10 com.sun.mail.imap.IMAPFolder close
SEVERE: A6 NO CLOSE Block size illegal for BPOOL.
javax.mail.MessagingException: A6 NO CLOSE Block size illegal for BPOOL.;
nested exception is:
     com.sun.mail.iap.CommandFailedException: A6 NO CLOSE Block size illegal for BPOOL.
     at com.sun.mail.imap.IMAPFolder.close(IMAPFolder.java:1003)
     at com.sun.mail.imap.IMAPFolder.close(IMAPFolder.java:935)
     at com.remedy.arsys.emaildaemon.ReceiverModule.terminateIncommingMailbox(ReceiverModule.java:1837)
     at com.remedy.arsys.emaildaemon.ReceiverModule.doWork(ReceiverModule.java:357)
     at com.remedy.arsys.emaildaemon.ThreadBase.run(ThreadBase.java:268)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.sun.mail.iap.CommandFailedException: A6 NO CLOSE Block size illegal for BPOOL.
     at com.sun.mail.iap.Protocol.handleResult(Protocol.java:294)
     at com.sun.mail.iap.Protocol.simpleCommand(Protocol.java:316)
     at com.sun.mail.imap.protocol.IMAPProtocol.close(IMAPProtocol.java:926)
     at com.sun.mail.imap.IMAPFolder.close(IMAPFolder.java:1000)
     ... 5 more
Regards,
NAKAI

Hi,
I'm experiencing a quite similar problem in our BMC Remedy Email Engine. IMAP mail integration that has been working for a long time has suddently quit working and now producing error message as below every second instead. NAKAI - did you find any solution to your problem? Anyone else that has experienced any similar?
Thanks in advance,
Daniel
A94819 NO The request is not supported.;
nested exception is:
     com.sun.mail.iap.CommandFailedException: A94819 NO The request is not supported.
javax.mail.MessagingException: A94819 NO The request is not supported.;
nested exception is:
     com.sun.mail.iap.CommandFailedException: A94819 NO The request is not supported.
     at com.sun.mail.imap.IMAPMessage.loadEnvelope(IMAPMessage.java:1063)
     at com.sun.mail.imap.IMAPMessage.getMessageID(IMAPMessage.java:428)
     at com.remedy.arsys.emaildaemon.ReceiverModule.checkAndSkipStoredMessages(ReceiverModule.java:397)
     at com.remedy.arsys.emaildaemon.ReceiverModule.doWork(ReceiverModule.java:275)
     at com.remedy.arsys.emaildaemon.ThreadBase.run(ThreadBase.java:268)
     at java.lang.Thread.run(Unknown Source)

Mail won't close after security update

I just installed the recent security update (running 10.4.8) and now Mail won't close on either my Dual g% tower or on my iBook. In fact, both computers were unable to reboot after the install because the mail program needed to be force quit.
This was never a problem prior to the install of the security update.
Anyone have any ideas?
Thanks!

Problems arising right after installing a system update are usually the result of the problem already being there, or not having installed the update properly, or ignoring Apple’s "Important: Please read before installing" warnings, etc., rather than being caused by the update itself. In order to ensure that the update is installed properly, proceed as follows.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the update that appears to not have been installed properly.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.
The above won’t solve the problem, but will allow us to at least troubleshoot it properly. Post back with your observations when done.
How many accounts do you have and what type are they (POP, IMAP, .Mac)?
In Mail, open Window > Activity Viewer. What do you see there when Mail refuses to quit? Actually, you may be able to avoid having to force quit Mail by canceling whatever it’s doing (by clicking on the red stop icon of the activity).
Do you have any Mail plug-ins or any system utilities that could interfere with Mail? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

Bounced email causes mail app to close

After reading many many posts across the internet, I finally figured that a bounced email message (which may show up in your inbox as "mail delivery error" or something similar) was crashing my mail app.
The symptoms? I would open my mail app, it would try to retrieve mail and then close about 3 seconds later.
The fix? I had to log into my POP mail account via the web, delete the email with the delivery error and then on my iPhone, delete/add back my mail account. If you don't delete the message on the server first, you just end up back in the same boat the next time you retrieve messages from the server.
The fix is simple enough but how can the folks at Apple expect us to do this every time we get a bounced email? We really need a fix ASAP unless there is one on the way?

I seriously doubt Apple expects us to do this everytime there is a bounced email.
For me, a bounced email is few and far between - only when the recipient's incoming mail server allocation has been exceeded and not accepting any new messages, or the incoming mail server incorrectly detects my email address or a message as being spam, which is even more few and far between. Regardless, a bounced message - a return error message from the recipient's incoming mail server did not crash the iPhone's Mail client, but this is with an IMAP account. Since these are so few and far between, I don't recall the last time I recieved one.
Not sure what the fix is or if a fix for POP accounts is on the way but in the interim if you are getting many bounced messages, you may want to look into why.

Mail won't close, can't shut down my MacBook Pro

Dear Apple Community,
since 10.7.4 Mail won't close sometimes. I use mail sometimes in Full-Screen, sometimes in the standard mode. If I'm finished with Mail, I close mail using "cmd+w" & "cmd+Q" or "cmd+Q". The programm is closed (window is gone), but the little blue bubble stays under the Mail icon at the dock. If I want to shut down my MacBook Pro (early 2011) I get the message "Can't shut down. You have to end Mail."
This *****. Any suggestions for a fix?

I had this issue and got frustrated having to force quit all the time.
I usually quit all programs with shortcut keys.
MAIL now quits everytime if I just click Mail-Quit Mail
Don't use shortcuts to quit it and it will be fine

App Store and mail don't work in mavericks on a Mac Pro mid 10

App Store and mail don't work in mavericks on a Mac Pro mid 10
During the day more and more functions of my MacPro (mid10) are down. Icons disappear, mail pop out every time, app store doesn't even come up, wifi connection to other devices like ipad and macbook air fails.
Any suggestion to come over this terrible upgrade?

App Store and mail don't work in mavericks on a Mac Pro mid 10
During the day more and more functions of my MacPro (mid10) are down. Icons disappear, mail pop out every time, app store doesn't even come up, wifi connection to other devices like ipad and macbook air fails.
Any suggestion to come over this terrible upgrade?

Session created by RFC Destination don't close.

Hi Experts
I create an RFC Destination in NetWeaver 7.2, and i use this destination to access some RFC from CAF project.
The problem is when i access the RFC, the ECC create a session to the user and don't close this session.
After some time i have a lot of session created in ECC. The session in ECC should be closed, because i get some error when there are a lot of session with the same user opened in ECC.
I create the destination in NWA - Destination.
Could someone help to solve this?
Regards
Marcos Brandã

Not anwsered.

Tabs don't close when I click more then 10 links

After updating to Firefox 11 a strange problem occurs when I click more then 10 links and try to close them: the links don't close and I have to close the window. This never happend before. I do some paid to click programs and have to click many links, so this is not very nice... Does anyone recognise this and is there already a fix for it?
Thanks!
Anja

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Files Don't Close when Project is Closed

Hi,
When I close an open project in the IDE, not all the files get closed. Some of them remain open in the JSC IDE, even though the project has been closed.
Would appreciate if the JSC team can acknowledge and fix the issue.
Regards
Haroon

Hi HaroonA,
In order to file a bug, I need a reproducible case. Is this consistently happening to you? How many projects are you working with when this happens? What files don't close (JSP/Java/Navigation.xml/etc.,)? If you can give me a scenario where this fails, I'll escalate the issue.
Thanks!
Sandeep
--Creator Team

Everytime I send an email the warning box appears--- WebKit2 WebProcess,exe has stopped working. Then I hit close program and it shuts me out of my inbox. If I don't close the warning box my computer stay s in limbo. What is is? It is not in my control pa

Everytime I send an email the warning box appears--- WebKit2 WebProcess,exe has stopped working. Then I hit close program and it shuts me out of my inbox.
If I don't close the warning box my computer stay s in limbo. What is is? It is not in my control panel and does not come up as a program in my computer.
Help?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

If you don't have a rescue email address (or you do but aren't the receiving the email to it) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Promotion in approval process don't close data at owner.

Hello!
I have a problem in approval process in planning unit hierarchy. I created planning unit hierarchy. When I run approval process, ownership of the process moves to user, which specified in planning unit hierarchy as "Owner". When owner promote approval process to the next user "Viewer" and current position is at "Viewer" tha data couldn't be entered by Owner. But in my situation data don't close to enter at Owner, and he can change the data, which he sent to Viewer. It isn't correct. Why data don't close to enter at Owner, though the current position of approval process at "Viewer"?

From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}

Why my smart folders dissapear in mail when i close mail application in mountain lion?

Why my smart folders dissapear in mail when i close mail application in mountain lion?
Please help!

My results jumped up from around 1000 to 10,000 when I did that.
I think this may have to do with having x11 and xcode installed.
In case anyone is interested, these are the folders I've had to exclude:
User\Library\Developer
System\Library\Frameworks
opt in the root folder of the HD (this is x11. You may have to Finder's 'go to folder' option to get to it.)
There was also Office stuff coming up which looks like it's from the system when you see it (the identities folder and the subfolder within the Office 2011 folder in Applications)
The combination of this stuff seemed to create the impression of more files from the System and Library folders were coming up than actually were.
In case anyone is still reading, the stuff *still* being thrown up that I'm aware of is
Mountain Lion screensavers from the System and Library folders.
PreferencePanes - System, PreferencePanes - User and PreferencePanes - Library folders, which each show up as individual results.
But, as you say, bispymusic, perhaps Apple has deigned that those folders appear in results. Thanks a lot for your help! Have a good one.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Mail don't close

Similar Messages

Maybe you are looking for