Mail group and sieve filter

Hi all
I have this situation:
1. An email group A, with a bunch of members.
2. An user B, which is member of group A.
3. User B has a filter which verify the sender address and forward the message to user C if the from address contains the pattern aaaa.com.
4. Group A, users B and C are in the same domain bbbb.com
5.. An User D in the domain aaaa.com
Suppouse user D send an email to the group A in domain bbbb.com, once the group is expanded user B recieve the email message but the filter is not applied, the email message is not forwarded to user C in domain bbbb.com.
In the case that user D send and email directly to user B the filter is applied and the message is forwared to user C.
This is a normal behaivor.. ?? As I read the filter is applied to every member once the group is exoanded.

The answer is likely to depend on "email group", and if it's a "mail group:, or a "mail list".
Messages sent to a "mail group" appear to be sent by the sending person. Messages sent through a "mail list" appear to be sent by the list itself. Makes filtering options different.
To change a "mail group" to a "mail list", add a msgrperrorTo attribute to the ldap entry, per the schema guide.
Now, to a direct answer to your question. . .
It all depends on your filter. Is it looking for envelope headers or message headers? does the message itself actually have what the filter is looking for? You need to start by looking at the actual message that the filter is acting on.....

Similar Messages

  • Getting "Error in sieve filter" message with each incoming mail and cannot recieve or send mail to or from iCloud account apart from Apple emails!! Please help!

    Since approx 7am GMT I've been getting "Error in sieve filter" message with each incoming mail, worse though, since about 12 noon I cannot recieve or send mail to or from my iCloud account apart from I've been getting  emails from Apple (ie I've just received a welcome one from Apple Support Communities...)!! I've had this account for years, never had a problem - it can't be the OSX Mail server because the problem is the same when I log directly into iCloud. I've tried sending emails from my Hotmail account to my iCloud account (a .mac) and just get undeliverable messages back. I'm really in the s**t now at work. : (  I just set up a Smart TV yesterday with a wireless dongle - that's the only thing I've done out of the ordinary. I've spoken to Sky who are my ISP and they say all's fine with them (although the router kept kicking my off the internet this morning which was strange...). Router seems fine now though.  I'm really hoping someone here can help!!
    Many thanks!!

    Do you think once Apple sort this out I'll get my missing emails back?

  • Mail sieve filter and Return-path problem

    I want replace return-path header for one particular user when receive email. I use only sun convergence for send mail.
    imta.cnf
    ! ims-ms
    ims-ms defragment notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D destinationfilter /opt/sun/comms/messaging/config/imta.filter
    ims-ms-daemon imta.filter
    require ["editheader"];
    if header :contains "from" ["[email protected]"] {
            deleteheader "Return-path";
            addheader "Return-path" "[email protected]";
    }When I send email from anonymous i want delete old Return-path and add new return-path. The problem is that i see on header the new return-path but i see the old also.
    It's possible delete the default return-path ?
    Thank's
    Giovanni

    giovanni.romaneghi wrote:
    I want replace return-path header for one particular user when receive email.Why do you want to replace the Return-Path header? What is the actual problem you are trying to solve?
    Also what is the exact version of Messaging Server that you are using (./imsimta version)?
    imta.cnf
    ! ims-ms
    ims-ms defragment notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D destinationfilter /opt/sun/comms/messaging/config/imta.filter
    ims-ms-daemon
    You should not use "imta.filter" as the destinationfilter file-name. imta.filter is the reserved for the MTA-wide sieve filter file-name:
    http://wikis.sun.com/display/CommSuite/Mail+Filtering+and+Access+Control#MailFilteringandAccessControl-ToCreateMTAWideFilters
    When I send email from anonymous i want delete old Return-path and add new return-path. The problem is that i see on header the new return-path but i see the old also. The "Return-Path:" header is automatically added by the MTA after the sieve filter has been evaluated which is why you get two Return-Path: headers in the resultant message.
    Regards,
    Shane.

  • E-mail PROBLEM:  I get this: Reason: Error in sieve filter: Too many notifys specified

    I am using a MacBook Pro and an iPhone.  I always had success in getting e-mails pushed to the phone.  Suddenly, every time I receive an e-mail, I get another one from the postmaster saying: Reason: Error in sieve filter: Too many notifys specified.
    I do receive the e-mail simultaneously.
    However, I no longer get any e-mails pushed to my iPhone.
    Anybody have any suggestions?
    Thanks!
    Rob

    Having the same issue. Started this morning. There is something at the end about Proofpoint virus protection. Not just one email. Several. They all have this at the end. Several emails from the county where I live. Got the messages but also this. Anyone know about this?
    Apparently, I got an email from my mail order prescription service at my .mac address, but didn't get it. This is what it says at the end:
    Message-id: <[email protected]>
    MIME-version: 1.0
    X-Proofpoint-Virus-Version: vendor=fsecure
    engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
    definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
    X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
    ipscore=0 suspectscore=3 phishscore=0 bulkscore=0 adultscore=0 classifier=spam
    adjust=0 reason=mlx scancount=1 engine=6.0.2-1302030000
    definitions=main-1303070066
    X-Name-Header: [BOB] EXP Order Receipt
    X-Name-Body: [BOB] EXP Order Conf Postal
    X-Name-Footnote: [BOB] Web Footnotes
    X-Name-Footer: [BOB] EXP Footer 2
    X-Name-Cobrand: BOB
    X-Name-BrandId: 00
    X-Proofpoint-Virus-Version: vendor=fsecure
    engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
    definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
    Then another from my son's BS troop:
    Reply-to: Troop 859 EBlast
    Message-id: <[email protected]>
    MIME-version: 1.0
    X-Proofpoint-Virus-Version: vendor=fsecure
    engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
    definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
    X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
    ipscore=0 suspectscore=10 phishscore=0 bulkscore=0 adultscore=0
    classifier=spam adjust=0 reason=mlx scancount=1 engine=6.0.2-1302030000
    definitions=main-1303070051

  • TS3276 I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem. Please help!

    I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

    I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

  • Mail Error: Reason: Error in sieve filter

    Hello,
    Yesterday I started to receive this strange email error for every message that I send from one of my iCloud accounts (all others seem to be functioning fine).  Does anyone have any idea what might be happening?  I have done a search and nothing really comes up.  I think the system is suggesting that the @me.com account is not valid, but it clearly is.
    Many thanks!
    ERROR MESSAGE
    Message-id:
      <5D56EF844AC57D49989CB3CE9DB70D8B0B34679C@EX14MBX1A.>
    Date: Thu, 07 Mar 2013 08:40:38 +0000
    From:
    To: [email protected]>
    Subject: RE: Re:
    Processing errors occurred during delivery:
    Recipient address: [email protected]
    Reason: Error in sieve filter: Notify mailto: recipient is not a valid address
    Delivery processing continued in spite of these errors.
    Reporting-MTA: dns;ms03531.mac.com (tcp_intranet-daemon)
    Arrival-date: Thu, 07 Mar 2013 08:40:40 +0000 (GMT)
    Original-recipient: rfc822;[email protected]
    Final-recipient: rfc822;[email protected]
    Action: delivered
    Status: 2.0.0
    (Error in sieve filter: Notify mailto: recipient is not a valid address)

    Hello,
    I've the same problem since this morning.
    I read on other topic posted that it's a know problem.
    Florian

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

  • Filter AD Security Group and add member through visual webpart

    Hi All,
    I want to know how to Filter AD Security Group and add members to it from SharePoint 2013 Visual webpart, where i have multiple domains as well.
    Regards
    Rathanavel
    Rathanavel

    SP doesn't interrogate AD groups (DL's or SG's)... you'll need to query AD directly (ADSI).
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Group Mail, Mailman and archives

    Im confused. I have a mailman list I want to migrate to Leopard Server. Id like to let the listers have a wiki. Ive set up the group, and the wiki and I see it. (i have other problems with that but ignoring them for the minute)
    Will poste to my mailman list be the mail archive?
    If so can I migrate my old archive somewhere to make sure the old data is still searchable.
    Or, is a mailman list completely separate from a group mailing list.
    Like I said. Im confused.
    If this is all explained somewhere please point me. Ive looked for doc and searched - probably not enough.
    thanks
    Angus

    Hi
    "It seems that group mail introduced in previous Snow Leopard Server, it's gone. There is mailman, but I don't need a mailing list , just a simple mail grooup functionality. It's impossible to do in Lion Server?"
    Actually Group e-mailing was available in previous versions of the Server. It's not impossible to do in Lion Server either. It's just not obvious if you want to use the interface. There's not much documentation regarding this either.
    These two threads (you could have searched this for yourself) should have the information you need:
    https://discussions.apple.com/thread/3518290?start=0&tstart=0
    https://discussions.apple.com/thread/3229060?start=0&tstart=0
    There's also a way of doing this using WorkGroup Manager's Info Tab.
    You should get into the habit of using the command line on OS X Server - the Terminal application in /Applications/Utilities - as this is the most effective way for you to get what you want, especially with the Mail Service.
    The other Server Administration applications (which you may not be aware of?) are available for free download here:
    http://support.apple.com/kb/DL1488
    You will need Server Admin to initially configure the Mail Service properly. As ever remember to set up DNS Services correctly as everything you want or may want will depend on it.
    HTH?
    Tony

  • Command to list all email aliases /groups and members on the mail server.

    Hi,
    We are using SJS MEssaging server 6.2 .
    Which is the command to use to list all email aliases/groups and members on the mail server.
    Thanks,

    sureshsamuel wrote:
    We are using SJS MEssaging server 6.2 .
    Which is the command to use to list all email aliases/groups and members on the mail server.Email aliases/groups can exist in text files in the configuration directory of Messaging Server or be defined in the LDAP Directory Server. You can use the "commadmin group search" command to list the ldap groups (if you have Delegated Administration installed/configured), otherwise you can use a directory ldapsearch to find the groups.
    Regards,
    Shane.

  • When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list (I do with Mail.app)...?

    When I use Thunderbird with Yahoo Groups, Google groups, and other email lists, I don't get a copy of my own emails back from the list. I *do* when I use Mail, so it seems like a Thunderbird thing. I'd really like to see my own emails come back to me in the conversation so that I know where my remarks fall in the discussion; it's very disorienting when you can't tell if your email has arrived at the list, or not. I can't seem to find the setting, and I've searched thru your help topics, etc., to no avail. Thanks.

    It's both gmail and mac.com email accounts, and it's all email lists -- including some privately hosted on servers, that are not Google groups, not Yahoo groups.
    I'm not sure what you mean by "saving a copy of your messages yourself" in Mail -- if I email to the lists with Mail on my laptop or iPad, I can see it on my desktop computer too, right in line with other email messages in the thread, after the list resends the message I've submitted. It's only Thunderbird that this "invisible posts" behavior happens, and it didn't use to happen this way. I used to get my emails posting right in the thread.

  • I set in prefferances plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

    I set in preferences plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

    They are being shown.  When Photoshop gray out items it means in the documents current state  that item is not supported,  Get the document into a state that the grayed out filters can be used.  Some filters mat not support some modes like CMYK. 32bit color, Lab etc. They seem to be listed but nor currently applicable. Note whem no document is open all are grayed out the when a simple clipboard image is open all are available.

  • The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!

    The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!

    Mail/Preferences/Composing. Do you have the CC myself box checked?

  • Address and Mail group issue

    I am unable to send emails to the entire group that I have created in Address book. If I have say ten emails I cannot send email with a couple of clicks I must open the group and add each email one at a time. I have multiple Macs and only have this problem on the two newest. The older ones work just fine. I have researched this to no avail any help would be appreciated.

    Snow Leopard does not work with iCloud. However you can enter the4 email settings manually - please see this page:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html

  • Group and Filter for one Repeating Framte

    When I use a filter ("first" / number of records 1) on group at one repeating frame then all other repeating frame of this group use this filter.
    How can I create filter only for one specific repeating frame ?
    Thanks.

    If ur clear exactly what ur trying to do i can help i think
    Sri
    When I use a filter ("first" / number of records 1) on group at one repeating frame then all other repeating frame of this group use this filter.
    How can I create filter only for one specific repeating frame ?
    Thanks.

Maybe you are looking for