Mail out box not sending but iPad is

hi
I am getting a strange problem, the out box of mail is not sending out but my iPad that is connected to the same router is sending out an dI am receving the messages send to myself are coming in mail on my iMac.
Ta

If mail is being receieved but will not send then there is a possibility the iMac has a corrupt mail preference. You can first restart in Safe Mode, this will reset some caches. If the problem persists then go to Mail-Prefences-Accounts-Select the account that is having the problem- and then re-enter all preferences. A corrupt preference may appear OK which is why it needs to be re-entered.
If you don't know how to restart in Safe Mode, hold down the Shift key when you hear the Startup tone until a progress bar appears. After restarting in Safe Mode then restart normally.

Similar Messages

I have a iphone 6 wont take all calls says mail box not setup but is set up help please

i have a i phone 6 wont take all calls says mail box not setup but is set up help please

Hello ram tough,
Thanks for the question. After reviewing your post, it sounds like the iPhone is not receiving some calls. Are you having trouble with visual voicemail? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If you can't make or receive calls on your iPhone - Apple Support
Get help with visual voicemail on your iPhone - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Hi! I cannot remove from my iCloud account an associate e-mail, which is not mine but my daughter... Could anybody help me?

Hi!
I cannot remove from my iCloud account an associate e-mail, which is not mine but my daughter... Could anybody help me?
That email address, appart from mine, appears in every single device I have, iphone, ipad, macair... When I sync it merges my personal data with hers (my daughter)...

To fix this, one of you should migrate their devices to a new account. To migrate to a new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data. If you have other iOS devices, you can just save the photos stream photos to the camera roll, delete the existing account, choose Delete from My iDevice (since the data is already in the other account), then sign into the new account. If you have a Mac that needs to change to the account, go to System Preferences>iCloud, sign out, choose Delete at all of the prompts, then sign back into the new account.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.

Mail.app will not send (att) mail. Web mail and Thunderbird can send.

Mail.app will not send (att) mail. Web mail and Thunderbird can send.

I'm having the exact same problem on my iMac. I can receive email from imap.mail.yahoo.com, but cannot receive from smtp.mail.yahoo.com. I have not changed these settings in years and as of a few days ago they stopped working. These settings work fine on my iPhone and iPad.
So far I have:
-Deleted accounts and reestablished them
-Deleted the Mail preference file ->com.apple.mail.plist

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

My (postage stamp icon) mail program will not send outgoing mail - only receives, what's up with that?

My (postage stamp icon) mail program will not send outgoing mail - only receives mail.
Says the outgoing mail server is wrong, but Comcast says it's right - what's up with that?
Is there a way to reload the standard (postage stamp icon) mail program?

Clearly there's something wrong with the configuration. Reverting to some other mail application (whatever the 'standard' one is...) won't help.
What does the Connection Doctor (Mail -> Window -> Connection Doctor) have to say about it?
Chances are your username/password for your SMTP server are incorrect.

E-mails I did not send

Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day

bowkill56 wrote:
Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day
It sounds like someone has your email login info and is using it to send spam. Any time you think your account might have been compromised, it's a good idea to change your password and secret question/answer to something new and complex, and run a virus scan.
The SMTP blocks are usually in place for 24 hours, so 24 hours after you stop the intruder, you should be able to send again.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Hotmail does not "send" with iPad 1 mail

I am using the Mail function of iPad 1 with my hotmail account. All of a sudden, outgoing email does not send. Still pulls down incoming messages from hotmail. But outgoing just stays in the Outgoing Mail queue.

I have the same problem, but it only started after May 20th. Synching from Hotmail to Apple mail on my Mac workied fine up to that date then apparently just stopped working. Anyone have a clue?

Mail...will send but not receive

I have OS 10.4.11, and mail version 2.1.3. When i open my mail app, the inbox circle starts spinning like it is getting mail, and just continues to spin and spin. While it is spinning, you can send mail and it works fine. But with getting mail, the circle spins and eventually times out and say "mail quit unexpectedly." I am not sure what to do. And I really need help. Thanks so much!

Hi Kasey,
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Mail claims to be sending, but it should not be sending anything.

Hello,
It has now happened twice that I have turned my Macbook Pro on, and clicked on Safari and Mail at more or less the same time, to have the following very disturbing event take place:
1. Safari gets the spinning rainbow, while
2. The Mail "Sent Mail" menu changes to "Sending" with a spinning activity icon that indicates that it is in the process of lengthily sending something. Since there was absolutely nothing it should have been sending at that moment, I cut my internet connection and quit mail. When I have relaunched Mail with no internet connection, there has been no hint of what it might have been sending. There is nothing in Drafts, no Outbox folder, and nothing new or unread in Sent.
Last time it happened, I checked Console for the timeframe in which this occurred, and here was the smoking gun:
8/1/08 6:33:23 PM Mail[173] SyncServer is unavailable: exception when connecting: connection timeout: did not receive reply
8/1/08 6:33:23 PM Mail[173] Error registering sync schema: Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))
8/1/08 6:33:23 PM Mail[173] Error registering sync client: Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))
8/1/08 6:33:23 PM Mail[173] Error registering sync client: Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))
8/1/08 6:33:23 PM Mail[173] Error registering sync client: Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))
8/1/08 6:33:26 PM Mail[173] Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))
Stack Trace: (
[lengthy stack trace edited out]
8/1/08 6:33:29 PM Mail[173] Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))
Stack Trace: (
[lengthy stack trace edited out]
8/1/08 6:33:29 PM Mail[173] notes sync error:Error Domain=ISyncErrorDomain Code=300 "Operation could not be completed. (ISyncErrorDomain error 300.)"
8/1/08 6:33:37 PM SyncServer[187] * -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid
So, OK, Mail is trying to sync. Here is the problem: I don't have a mail account that supports syncing or any handheld device with which I would need to sync, nor have I ever turned on any form of syncing in Mail, because, again, no devices or accounts that support syncing. So if there is an attempt to sync, it didn't originate with me.
What on earth is going on here? It looks terrible -- even if it's just an innocent UI bug, it gives the clear impression that Mail is sending unknown things at its own inclination, about the worst thing an email app could be appearing to do IMO. If anyone can shed any light on this weirdness, I'd appreciate it.
Thanks!

*there's no reason to be paranoid*
Says Mulder .
Anyway, as I mentioned, I don't use any sync-able email, just a very plain-jane POP email provider. iSync reports no devices and has nothing in its log, which matches my never having installed anything in need of syncing.
The thing is, if Mail says its sending something when nothing was ever sent, that's a largish bug whether it is actually sending something or isn't, and there isn't really enough info here to know which of those are the case. Maybe Mail just displays "Sending" because an attempt to do something reasonable is timing out, maybe it does an innocuous and normal POP thing using very confusing nomenclature, or maybe it's really trying to send something which has a wrong flag or something. There isn't really enough info to know what is going on, so I was hoping someone could identify the symptoms.

Mail will not send but thunderbird will

I have two mail programs: mac mail and thunderbird. Mail will not send mail, but Thunderbird will. Any suggestions?
SJ

Yeah stop trying to make Mac Mail work and just use Thunderbird. You really don't need 2 Mail programs.

PSE 9 Adobe E‑mail Service do not send to some mail adresses

Background:
My 64 bit Win 7 home premium PC do not have any mail client and I'm using only the IE brower for mailing [my mail is hosted by one.com] . So for PE sharing (mail) i'm using the organizer mail client Adobe E‑mail Service. In organizers sharing preferences I'm suposed to enter my own mailadress for verification of the mailing adress for Adobe E-mail service.
The issue:
If I enter my own private mailadress [email protected] there is no mail send out.
My mail host provider, one.com, has verified that there is no record in their mailserver logs of any incomming mail what so ever = no mail has succesfully been send by the Adobe organizer mail client.
AND IF I use my work mail adress [email protected] in the preferences and as mail reciever every thing works fine.
I also tested having [email protected] noted in sharing preferences, but having my priviate mailadress [email protected] only as a mail reciever. Well same negative result. There is no registred mail in the mail server logs at all coming from .[email protected] or send to [email protected]
My questions
1. Is there any PE logs to look at i the PC
2. How do I make Adobe support to seriusly take on this issue. The somewhat disapointing answer the give me are like "not our fault, ask someone else. case closed"
3. I have once, non-PE elsewhere, experienced a SW that did not recognice a '[email protected]' adress as a mailingaddress. Anyone know where to find the list over what type of mailadresses PE recognizes?

I hope you receive some replies as I have a very similiar situation. I wish I could help but obviously I cannot.
\Good luck!

Mail appears to be send - but isn't

Hopefully somebody can help figure this out - because it's driving me nuts:
I use Mail - and in my job I often sends mails with a lot of recipients. But Mail is playing games with me. Most of the time I send and receive OK, but from time to time mails disapears.
Two examples:
When somebody sends me a mail (and I know its coming), I don't get it - and the sender doesn't get an error mail.
When I send out emails, they move to the send folder - but they aren't send.
What can I do to make sure this doesn't happen? It's really a big problem.
Thanks in advance,
Anita
PowerBook G4 12" Mac OS X (10.4.7) Mail 2.1

If this email account is provided by your ISP or by your web domain hosting company, you need to contact the email account provider for this account.
If someone sends you a message and you don't receive it with the Mail.app, have you checked the account via webmail access (if available) using a browser to confirm if the missing message is available on the server but not downloaded by Mail?
If not available on the server either, this is not a Mail.app problem.
If a message cannot be successfully sent by the Mail.app for whatever reason, it will remain in the Outbox mailbox. A message moved to the account's Sent mailbox indicates the message was sent.
Open one of these sent messages not received by the recipient. At the menu bar, go to View > Message and select Long Headers.
If there is text - including a mix of numbers and letters next to Message ID, this is additional proof the message was sent. When contacting your ISP or email account provider for your email account, you need to provide them the Message ID for any sent message reported as not being received by the recipient. Your ISP or email account provider for your email account should be able to trace the message with the Message ID for the message to determine if it was delivered to the recipient's incoming mail server.
This doesn't sound like a Mail.app problem to me.

Notification Mailer R12 - Does not send emails

Dear All,
we are trying to set up the Standard Oracle Notification Mailer in R12.
We believe we have pretty much covered all aspects of the configuration but it looks like something is either missing or not working...
Here what has been done so far:
1. We purged the Workflow Queue to avoid unwanted emails to be sent out, updating the WF_NOTIFICATIONS setting MAIL_STATUS to SENT; the WF_NOTIFICATION_OUT is empty.
2. We created an Ad-Hoc Workflow Mailer for a single item_type (UMXUPWD, for changing OA Password):
Outbound eMail Account (SMTP) set up (just the server name not the UserName and PWD)
Inbound eMail Account (IMAP) set up (ServerName, UserName, PWD and Replay-To)
Correlation_ID has been set to UMXUPWD
on the Message Generation tab we filled up the From and Reply-To-Address fields
3. Override Address has been set (so that all emails will be sent to a Test Account) and works fine (We did get the email and we confirmed the code).
4. we changed at Global Level (from the Workflow Administration page) the "Do Not Send me Emails" to "Send me HTML mails"
5. Workflow deferred agent listener has been set (default values)
6. Workflow deferred notification agent listener has been set (default values)
7. Workflow error agent listener has been set (default values)
8. Workflow inbound notification agent listener has been set (default values)
We started the Workflow Notification Mailer (for UMXUPWD). We selected a User which has "Send me email" as preference, we requested a password change for this user. We see the notifications in the WF_NOTIFICATIONS table ready (mail_status = MAIL) to be sent but the WF_NOTIFICATION_OUT remains empty and no mails are sent out. We also tried to change the Correlation_ID to the Message_Type (instead of the Item_Type) and to leave it blank...no results = no emails.
Note: neither the TEST Mail for the Notification Mailer worked, so far the only email which has been sent out was the one for the Overriding.
Any ideas why?
Thank You, Pier Paolo.

So the message got 'lost' from the deferred agent listener and the mailer: it was successfully dequeued and processesed from wf_deferred but not enqueued into wf_notification_out.
Check the log file for the deferred agent listener on the middle tier under $APPLCSF/$APPLLOG. The file name will be FNDCPGSC#####.txt (there will be about three of them, you will have to find the one with internal tag WFALSNRSVC). Reproduce the problem and see if there are any errors here.
Check if the persitance time for queue wf_notification_out is zero. If it is then you could be mislead: if it is zero then the message will be immediately removed by the AQ system, suggesting the message was never enqueued.
Also, run $FND_TOP/sql/wfmlrdbg.sql <notif ID> and get the HTML it produces... usually it is able to tell what could have happened.
I hope this helps,
Alejandro

PHP check boxes not sending info to DB? what am i missing

I have a checkbox that needs to stay checked but for some reason it isnt staying check as it is not passing the information to the database.
once the check is check it then directs to a new page
here is what i have so far..
there are three boxes then send to different pages and different columns in the DB but i have just included one as an example
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form3")) {
$updateSQL = sprintf("UPDATE plus_signup SET signedElease=%s WHERE userid=%s",
                       GetSQLValueString(isset($_POST['signedElease']) ? "true" : "", "defined","1","0"),
                       GetSQLValueString($_POST['userid'], "text"));
mysql_select_db($database_hostprop, $hostprop);
$Result1 = mysql_query($updateSQL, $hostprop) or die(mysql_error());
$updateGoTo = "e-lease.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
<form action="<?php echo $editFormAction; ?>" method="post" name="form3" id="form3">
      <div align="right"><span id="sprycheckbox1">
        <span class="body-text">E-Lease</span><br />
        <input type="image" src="../images/smalldownload.png" width="35" height="35" alt="download" value="submit"/>
        </a>
        <input type="checkbox" name="SignedLeaseShed" id="leaseshedule" <?php if (!(strcmp(htmlentities($row_Recordset1['SignedLeaseShed'], ENT_COMPAT, 'utf-8'),"1"))) {echo "checked=\"checked\"";} ?> />
        <br />
      </span></div>
        <input type="hidden" name="MM_update" value="form3" />
        <input type="hidden" name="userid" value="<?php echo $row_Recordset1['userid']; ?>" />
    </form>
<div id="ErrorZone"><span class="checkboxRequiredMsg">
<table width="400" border="1" cellspacing="0" cellpadding="0">
    <tr>
      <td><table width="400" border="0" cellspacing="10" cellpadding="0">
        <tr>
          <td>Agreement:<br /></td>
          </tr>
        <tr>
          <td>By you ticking the box above 'Electronically Sign', you are confirming that you agree</td>
          </tr>
        <tr>
          <td><strong>Terms and Conditions</strong></td>
          </tr>
        <tr>
        <tr>
          <td>I have read and understand the statement above</td>
          </tr>
        </table></td>
      </tr>
</table>
</span></div>
<script type="text/javascript">
var sprycheckbox1 = new Spry.Widget.ValidationCheckbox("sprycheckbox1", {additionalError: 'ErrorZone'});
</script>
i was trying it another way but wanted to try this way aswell so i get a full understanding of it.
thanks in advance

What is the name of the form field you are evaluating in your update statement? What the name of the field on your form? Are they the same?

Mail out box not sending but iPad is

Similar Messages

Maybe you are looking for