Mail - repeated release - never ending

Dear all,
I have a problem with the program mail under OS X 10.6.4 since 6 weeks:
Over the program mail I use several accounts, so gmx, freenet and yahoo. Until now, after a release of the unread emails no more emails were downloaded – of course. Now, without changing something, all emails were downloaded again and again, so that all emails are multiple in the in-box.
On the homepages of the providers, the emails are marked as read, however they were downloaded again from mail and marked as unread.
So far, I haven´t found a solution in the net. For any help I would be very thankful.
Thank you and best wishes
Harald

If you are using SSL, are you sure that is supported? If not sure try without SSL. If that is not the case, then quit Mail, and in the Finder open Home/Library/Mail and locate the MessageUidsAlreadyDownloaded3 file and remove it. Relaunch Mail and test. Any messages already downloaded will be duplicated one more time, but with that file refreshed it will hopefully be the last time for the duplication.
With the multiple accounts involved, it is likely that removing that file will be necessary.
Keep us posted.
Ernie
Message was edited by: Ernie Stamper

Similar Messages

IOS and Activesync mail Exchange (the never ending story)

Hi All,
And here we go again: even with the update 8.1.3 Mail with Exchange ActiveSync stopped working.
The problem occurs now in every update from 8.0 (and even with upgrades version 7.x). For each upgrade of IOS email and activesync stop working, not only in push mode but also in scheduled mode (eg every 15 minutes). The email does not update until I access mail app.
The Exchange Server does not change for years, and the solution must be provided on IOS from Apple and not from Microsoft Exchange Server since the problem occurs only on IOS and only after updates of iOS. This story is really frustrating. No Android or Microsoft Phone has never had this problem. I begin to think that changing phone is the only alternative.
I do not want to buy paid app to use the e-mail, a feature that should work perfectly with the default tools of a smartphone device from 729 EUR.

I posted this another another topic. Anyone have any clue?
Well, here's a new twist. I purchased the Academic Edition of Aperture 1.0 DIRECTLY from Apple and when the rebate was announced, I applied for it. A couple of weeks later I received a letter stating that my serial number "cannot be read, is incomplete, or was not recognized as a valid serial number". OK, my penmanship isn't the best, so I sent them one of the Aperture Software Coupons with one of the serial number stickers attached to it thinking that this would surely be sufficient proof of ownership. Today, I received the same letter again. I just got off the phone with their help desk and all they could tell me was that my serial number isn't eligible for the rebate with no reason why. When I spoke with the supervisor, they stated they don't have access to that information, only that it comes up as ineligible.
Did I miss something? Were there qualifications to the rebate that I overlooked? As a PC user trying to make the switch, this kind of customer service dosen't bode well.
(I understand that Apple doesn't allow the free exchange of information on these boards so the moderators will probably delete this post fairly quickly. If you have some insight, you can email me at davedotmelvinatgmaildotcom)
Thanks,
dam
iMac, 2 GHz Intel Core Duo, 2 GB Mac OS X (10.4.6)

Mail synching never ends

Hi,
When I connect my iPhone 3G, the synching process in iTunes 8.02 gets stuck on Synching Mail Accounts - and never ends. I even let the synching run all night, but the process was still going in the morning.
Does anyone have any ideas on how to fix this? Thanks.

Perhaps the difference is that the account you currently use is not an IMAP account but a POP account, and it is not configured to save messages on the server after retrieval. MobileMe and AOL mail are IMAP mail accounts.
If your present email provider supports IMAP, then change your mail account to use IMAP instead of POP. This will make it easy to keep both computers consistent with email.

SOLUTION TO NEVER-ENDING "CONNECTING" IN MAIL!!!!

SOLUTION TO NEVER-ENDING "CONNECTING" IN MAIL!
I just got off the phone with Apple tech support. You need to delete all your mail accounts (write down mail settings if you won't remember them).
Then you need to go under Settings- General- Reset- Reset Network Settings. When the phone restarts, just add the mail accounts one by one, and you're good to go. Keep in mind that a network settings reset will delete wi-fi settings.

Hey Matt,
You can just hold down the Home button for about 6 seconds to quit the Mail application, then launch it again.
http://support.apple.com/kb/TS2032
Jason

How to repeat event every hour never end?

How to repeat an event every hour and never end?
Am I crazy for doing this? Well Harvard Business School wrote an excellent article about time management. 1. Make list in the morning. 2. Refocus every hour. 3. Review list at end of day. It's been working great when I'm alerted every hour.
I want to make an event in iCal that goes on indefinitely and alerts me every hour. I have not been able to get this to work. I can make it work for one day but it stops after one day even when I have it set to go from today to a year from now. I also have it set to repeat "Everyday" and end "Never".
There seems to be some sort of bug because I set 24 alarms in sequence (12AM, 1AM, 2AM, 3AM etc...) but the hours have all become mixed up. It's now (3PM, 2PM. 8AM, 11AM...?).
Mac OS X version 10.5.7, Build 9J61

I will give your suggested a try. It might work splitting it up, but I would like it for at least all waking hours. Here's what I'm trying to do:
http://blogs.harvardbusiness.org/bregman/2009/07/an-18minute-plan-for-managing.h tml?cmmmc=npv-_-WEEKLY_HOTLIST-_-JUL_2009--HOTLIST0727
In actuality, if I go to Walmart and replace my (long since past) Casio watch that can be set to beep every hour I'll likely have my solution. But also I like the visual reminder to Refocus that I could get from iCal. Thanks

Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Never-ending restart

My phone has begun to restart itself several times a day. It then continues into a seemingly never-ending cycle of turning off and on. The Apple symbol appears followed by a circular symbol and then it goes black and repeats the process. It has been like this for going on 3 hours now and I would love to clear all the data as I have seen suggested but I can't get that far. Please advise.

Try an iPhone Reset by pressing/holding the Home button and Sleep/Wake or On/Off button simultaneously until you see the white Apple logo then release. This can take up to 10 seconds and decline the slide to turn off prompt when doing so.
If this doesn't work and your iPhone is not recognized by iTunes when connected to your computer, time to call AppleCare - (800) 694-7466.

HELP! a sql NEVER end run!

Hi, all,
I have a spatial table GUNITA_SUB. A "select" statement run on the table never end.
Pls see detail below:
1) ORACLE VERSION: 9.2.0.1.0 (Windows 2000)
2) CREATE TABLE:
CREATE TABLE "SYSTEM"."GUNITA_SUB" ("TOS_GID" NUMBER NOT NULL,
"TOS_GEOM" "MDSYS"."SDO_GEOMETRY")
TABLESPACE "SYSTEM" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS
255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1)
LOGGING;
3) CREATE INDEX:
CREATE INDEX "SYSTEM"."RTIDX_GUNITA_SUB"
ON "SYSTEM"."GUNITA_SUB" ("TOS_GEOM") INDEXTYPE IS
MDSYS.SPATIAL_INDEX PARAMETERS (' SDO_INDX_DIMS=2
LAYER_GTYPE="MULTIPOLYGON" SDO_RTR_PCTFREE=2 INITIAL=64K
NEXT=8192 MINEXTENTS=1 MAXEXTENTS=2147483645 PCTINCREASE=0');
4) TABLE DATA:
exp to GUNITA_SUB.DMP (1 row only, 46K after winziped as GUNITA_SUB.zip).
5) the statement will NEVER end run!
SELECT TOS_GID FROM SYSTEM.GUNITA_SUB WHERE SDO_RELATE
(TOS_GEOM, MDSYS.SDO_GEOMETRY(2003, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3), MDSYS.SDO_ORDINATE_ARRAY
(497926.23518501, 305741.04724192, 498681.34034164, 306144.37650229)), 'mask=anyinteract querytype=WINDOW') = 'TRUE';
Does anyone ever encounter the problem? a program bug? or wrong data?
I don't know how to upload the data file. but i can send the file by e-mail if needed.
Thanks!

Hi Liu,
I ran this against 9.2.0.4 after updating the user_sdo_geom_metadata entry to get rid of some validation errors:
update user_sdo_geom_metadata set diminfo =
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X', 498047.221, 503492.691, .005),
MDSYS.SDO_DIM_ELEMENT('Y', 303369.564, 311690.94, .005))
where table_name='GUNITA_SUB' and column_name='TOS_GEOM';
This allowed the data to validate better (no more redundant points), but the data is still invalid due to overlapping polygons within a single geometry. Oracle will not guarantee results on invalid data, so the fact that I can get it to work in this release does not predict that it will work in any other release. You need to use valid data with spatial.
Also, please remove it from the SYSTEM schema!
Kind regards,
Dan

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

Suddenly never ending pinwheel and slower than usual

My macbook pro suddenly started to get slow and gave me a never ending pinwheel while only having Safari running. The mouse was working but no response when clicking. Only way to restart computer was by holding down the Start button. Restarted and this time the computer hang up when I tried to Log in (while writing Login and password). I mangaged to Log in two more times but I got the pinwheel again when browsing internet. Finally I managed to make it to Support/Community.. any idea what's wrong?
Thanks in advance (: !

Print out these instructions and info at the links provided as most require you to be offline.
Do a SMC and PRAM reset first, then a Hardware Test
https://support.apple.com/kb/ht3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/ht1509
If the hardware test gives any errors, note them here.
Check the time and date on your computer to make sure it's correct.
If your still having slowdowns, pull the power plug on both the router and the modem, connect the modem and wait a bit then connect the router. Reboot your computer and it should connect automatically to your wifi. See if your slowdowns only occur if connecteted to the WiFI or not, that way it can be determined if it's a internet issue or not.
(If your still having slowdowns, it might be because you have a Open Network on your router and someone is leaching off of it. WPA 2 with AES is the only secure wifi standard))
You can test your internet connection speed here, see if it matches what your paying for.
http://www.speedtest.net/
IF your computer still has issues then:
Fish out the 10.6.x disks that came with your computer (grey) or the 10.6.3 Snow Leopard retail disk, stick it in the computer and reboot holding the c key.
(Make sure the disks are clean on the bottom, wipe with a very soft cloth and a tiny bit of rubbing alcohol to clean and don't place the disk on a harsh surface that can damage the bottom.)
Second screen in, under the Utilities menu is Disk Utility, select your drive on the left and click First Aid, Repair Disk (please write down any errors this gives and tell us) and Repair Permissions (the results there you can ignore)
Do not erase or reformat the drive.
Reboot and see if your computer works, if not repeat the c boot off the installer disk again and this time skip Disk Utility and install OS X.
It will install on top of your 10.6.8 installed version (only, not your programs or files), which when finished you reboot and immediately Software Update to 10.6.8
This should take care of anything wrong with OS X itself.
Now to clean the caches of the user and other checks.
Download the free OnyX for 10.6 and run ALL the maintenance and cleaning aspects and reboot at the end of the tasks (you can cancel in between reboots) but reboot at the end of using Onyx)
Do all the checks it asks when it starts up and note any errors here they report.
Also under the Verify Tab is a Preference (plist) check, check the "show only corrupt files" and run that, make a note of all and any corrupt plist files.
http://www.titanium.free.fr/
Plist files are preference settings files that sometimes get corrupted and may be the cause of your problems.
If you have some, then you can look in your Users/Library/Preferences folder for them and Trash them and reboot the machine and load the program responsible, the plist file gets rebuilt without your preferences which you reset.
The next thing to check would be your web browser plug-ins here
https://www.mozilla.org/en-US/plugincheck/
For Flash in Safari check here again as it's more accurate
http://flashbuilder.eu/flash-player-version.html
Download Flash and install if it's not this version (latest)
http://get.adobe.com/flashplayer/
Silverlight here
https://www.microsoft.com/getsilverlight/get-started/install/default.aspx
Finally install and run ClamXAv on your drive, this will look for known malware that might have gotten accidentally installed.
http://www.clamxav.com/
Since OS X was reinstalled, along with bundled programs like Safari, this should only leave applications and users as a source of any infection.
If your stil having issues, then create a new user and transfer your files over and when up on the new user, delete it.

D10, boot problems, a never ending fan test!

I hate this noisy fan test!!! My dog always panics, if it is in the room! But that's not the problem.
If I switch on the external mains, the fan test starts and ends after some ten seconds.
If I push the switch at the front of the maschine, the fan test starts and - sometimes - never ends. In this case, the maschine - obviously - will not boot. What to do? - Repeat the procedure. Sometimes I need 10 or more attempts to boot the maschine.
Now I found (shortly before I decided to bring the maschine back to the dealer): The fan test succeeds nearly every time (and the maschine will boot), if I switch off all the external USB-devices (5 disks, WLAN-stick, memory stick, etc).
My questions:
what's going wrong with the fan test at my maschine?
is it possible to skip this crazy fan test?
Thanks for your help!
Lenovo PC Think Station D10 6427-H6G, Windows XP

regarding the fan test, this cannot be disabled.   thinkstations are designed for 24/7 uptime just like servers and the BIOS tests the fans at every boot/reboot.   since there isn't much reason to turn these systems off or put them asleep, the best workaround is to leave your D10 running 24/7 as it was designed to do.   mine only gets rebooted for windows updates, software updates, or video driver updates.   otherwise, it's up 24/7/365.
regarding the fans getting stuck, update your BIOS.   the latest version can be found here.
also, if you put your system to sleep, be sure to wake it with the power button and not your keyboard.   a few users have reported their fans getting stuck when waking with their keyboards.   i'm not aware of the issue happening when using the power button.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Process never ends

Hi,
I'm developing -fixing somebody application- a SuperWaba application. SuperWaba is a poor minor release of Java Runtime. I'm transforming SQL Scripts into PDB files -i hate PDB files.
I make a Class that extends MainWindow that is called by Waba Applet. Waba Applet extends Java Applet -I hope so. When I run my class from the shell (cmd, over a Windows XP), an Applet Window appears and execute without erros my script transforming a SQL script in one or multiple pdb files (depending number of create sentences).
But, when i call my script from a PHP Script -i really hate this app, PHP + Java + ASP + Visual Basic ... can you believe it ? - the PHP Script launch Java, but Java app never ends blocking my PHP script. I think there is a problem in Applet Window creation, because there is no window or display to launch the app.
There is a way to run an Applet in background with no visualization ?
THX 4 Ur HELP

i really appreciate your help but i forgot to explain the problem
First, i decide to create a simple Java App that uses the PDBDriver JAR, but the #~"$%" Jar uses something from the Applet. When I run my class it launch these error.
java.lang.NullPointerException
        at java.applet.Applet.getCodeBase(Unknown Source)
        at waba.applet.JavaBridge.openOutputStream(JavaBridge.java:533)
        at waba.applet.JavaBridge.writeBytes(JavaBridge.java:588)
        at waba.io.NativeMethods4JDK.catalogClose(NativeMethods4JDK.java:824)
        at waba.io.NativeMethods4JDK$CatalogBag.finalize(NativeMethods4JDK.java: 674)
        at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
        at java.lang.ref.Finalizer.runFinalizer(Unknown Source)
        at java.lang.ref.Finalizer.access$100(Unknown Source)
        at java.lang.ref.Finalizer$3.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
#2- url: file://localhost/nullfile.pdb
found under localhost: file://localhost/nullfile.pdb
file not found

Never Ending Authorize loop

I'm now running into the never ending authorization loop.
I've found the KB Article and have followed all of the steps, but am still not able to get passed it.
I am noticing however that there are some discrepancies, even when I attempt to login to this site.
My Apple ID doesn't follow an e-mail address format [email protected] When I go to authorize however, by default, the system puts in the @xxx.com extension. I remove it and the system tells me that the computer is already authorized.
I'm using Windows7 x64 with iTunes 9.0.2.25 and a 3rd Generation Nano.
I've sent an e-mail in to Apple for guidance, but am looking for any other ideas.

Here is some additional information that I find questionable / lead me to believe that this is a bug in the system.
As I continue to look through the list of files that are "Not Authorized" I find that some of them are files, I didn't purchase through the iTunes store, but rather music that was imported via a CD from my collection.
What's going on Apple?!?!

Dropped database in a never-ending app

Hello,
I have an application which processes all the time by implementing a never-ending loop and a sleep at a given interval. It accesses the database to retrieve, insert and update data throughout the entire process. I have created a connection pool that contains a configurable number of connections (for any future multi-threading) that will be retrieved to complete the SQL transaction and released when it no longer needs it. The list of connections is decreased when I access the pool and increased when the connection is released. My concern is that I would like to detect when the DB has been dropped and brought back up without having to restart my app. The first way to detect it would be to check the connection object when it is used, but I am not sure if that is the way to do it correctly. Does it fail when I create the preparedStatement or when I run executeQuery or executeUpdate? What is the best way to detect whether I need to re-create my pool of connections?
I appreciate your feedback.
Thank you

It will fail when you try to open the connection. If for example you are using a JNDI DataSource when you call the DataSource.getConnection() method it will throw a SQLException with the correct code and message for the database vendor.
That said, I wouldn't do it the way you're doing it. By holding an open connection, you're pirating a connection resource that the DB may need for something else, or another app might need and in my opinion it's just bad design.
I would recommend opening the connection at the beginning of the method where you are doing the data access and then closing it (along with all of the other database resources before leaving that method. A general code pattern would look like this.
public void getSomeInformation(){
String sql = "SELECT something FROM somewhere" ;
try{
    // initialize the connection
    // initialize the statement object
    // prepare whatever parameters
    // execute the statement
    // make sure you got some results and process accordingly
catch(SQLException e){
    // handle any exceptions that might come up
finally{
    // close the result set
    // close the statement
    // close the connection
    // set all of the above to null to mark them for GC
}Some of this may seem like overkill, but that's a feeling that goes away when you've had your application spin into the ground because you accidentally left database resources open and killed the database and the application server.
Yes, there's a little overhead in terms of getting the connection, but it's a delay that my customers have never complained about in the face of the abject reliability of making sure that the house is clean and orderly all the time.

How to make a never-ending(looping) page in DW?

I want to make a page which repeats itself on the ipad when you scroll in any direction. In essense a never ending page.
Jus began using HTML5 for our app.

Hi
You can do this just by repeating the code, but this is a sure way to stop anyone visiting your site -
The 'new' page is downloaded every time, (complete waste of bandwidth).
Your user will think that there is something wrong, so will go somewhere else.
On mobile devices bandwidth is now often limited and/or paid for.
A site that just repeats itself will on devices that can display the entire page download all the pages, ad infinitum.
PZ

Mail - repeated release - never ending

Similar Messages

Maybe you are looking for