Mail sometimes won't send message

I had this problem with Mavericks, and it persists with Yosemite, using Apple Mail in both cases.  Specifically: I compose a message, click on Send, and the message goes to the Outbox and just sits - it won't actually send.  I checked with my provider to make sure the settings were all correct, and they are.  Even weirder, when this is happening I'm able to send mail - same account - from my iPad.   I send and receive email several times a day, and it mostly works fine. THis problem happens, on average, maybe once a week or so.  Any help would be appreciated, thanks.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Similar Messages

  • Mail app won't send messages out

    I am logged into gmail on my iPhone 4 mail app. I tried to reply to a message yesterday and it wouldn't work. The message sat in my outbox saying "unsent" because I needed to go to my mail account settings and enter a password. Well I went to settings, mail, account, and my password was stored there. I re-typed it anyway to see what would happen. I went back to the mail app, and the message still has not sent. But now I don't have an Outbox folder on the main page either! The only way I know it's still unsent is because when the app refreshes, it says 1 Unsent Message on the bottom of the screen.
    So my question is, what is going on, where did my outbox go, why did it tell me to enter a password, and most importantly, why won't my message send?!
    I was connected to wifi, if that makes a difference. And does it make a difference if it was a reply versus a new message? I just tried a test email, connected through 3G, and it says it sent.

    Something stuck in the cache? Try a reset. To reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt).

  • My e-mails sometimes won't send?

    Every fifth e-mail I try to send , does not send.  It also does not save in drafts.
    Also I cannot print from my e-mails. 
    It never gave this problem, it just happened overnight.

    Hello,
    What happens when you try send email?
    See also:
    *[http://mzl.la/1f8x6ld Sending and Receiving Emails]
    *[http://mzl.la/1k5DWjq Thunderbird in safe mode]
    *[http://mzl.la/1ml3Fmj Using multiple profiles]

  • Mail still won't send messages.

    Hi:
    I see that mac.mail had a system-wide problem yesterday with sending mail for an hour, but I haven't been able to send mail since yesterday around 2 and still can't. I repeatedly get the timed-out on port 25 error message. I can receive email.
    Is there anything I can do, you can do there?
    Best,
    Amy Sutherland

    Hi Amy.
    Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
    .Mac: Server timeout alert message when sending email

  • I recently updated to Mavericks and now all my e-mail accounts won't send

    I recently updated to Mavericks and now all my e-mail accounts won't send. They all receive ok but when I send I get a message "sender address rejected by server" and " Authentification required" The passwords are still intact

    Check the Mail settings for your account, especially the SMTP (outgoing) address, type of authentication, and entry of the proper email username and password. You can do this when you select the account then under the outgoing mail server use the dropdown menu to select the Edit option. Select your outgoing configuration in the list. Check the settings below, then click on the Advanced tab and check those settings.
    If all is OK, then I suggest your reinstall Mavericks:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • Why won't my iPad won't send messages?

    My iPad2 won't send message to person I just received from.  The send button is blue but not active. When I try to send to send a new message to another person their name is red marked with ! and the send button is gray. It won't accept any new name - alwayas in red with !.

    Figured it out. The iPad message box has two lines. The first says "Subject" in gray. If you type something into the "Subject" line, but don't type anything on the next line (which is for the message), the send button remains inactive. Try typing the message on the second line. Send button then becomes active.
    Now why couldn't Apple tell us that?

  • Não estou conseguindo enviar e-mail utilizando SMTP Email Send Message vi.

    Não estou conseguindo enviar e-mail utilizando SMTP Email Send Message vi. Uso a versão 8.6. Aparece a mensagem Error 66 occurred at TCP Read in NI_SMTPEmail.lvlibMTP Email TCP Read xTP Reply.vi:2->NI_SMTPEmail.lvlibMTP Email Command.vi:1->NI_SMTPEmail.lvlibMTP Email [QUIT].vi->NI_SMTPEmail.lvlibMTP Email Close Session.vi:3->NI_SMTPEmail.lvlibMTP Email Send Message Charset.vi:2->NI_SMTPEmail.lvlibMTP Email Send Message.vi:1->teste1.vi   
    Attachments:
    imagem.JPG ‏160 KB

    Bom dia Jean_ebrax,
    o VI SMTP Email Send Message não suporta servidores SMTP que requerem autenticação. Se você quiser continuar utilizando este VI, você pode utilizar um servidor SMTP Local para testar o seu código. O link abaixo é de um servidor free:
    http://www.softstack.com/freesmtp.html
    Para mais informações, consulte este link:
    http://digital.ni.com/public.nsf/allkb/57597451D40737058625729900589452?OpenDocument
    Agora caso você queira utilizar servidores autenticados, você pode utilizar a plataforma .Net da Microsoft. Abaixo segue um exemplo:
    https://decibel.ni.com/content/docs/DOC-2401
    Estou a disposição para quaisquer esclarecimento.
    Atenciosamente,
    Ricardo Ramos
    Engenheiro de Vendas - Sul
    National Instruments Brasil

  • My new iphone 4 receives mail but won't send it

    my new iphone 4 receves mail but won't send it..

    Depending on what account your using, you may need to enter a password for your outgoing mail server, same password as your incoming mail server - go back into the mail account and check.

  • My I phone 4 won't send messages

    Hi I have an iPhone 4 on iOS 6 and my carrier is Verizon, I'm having trouble with sending messages. For some reason it won't send messages , I also have a keyboard case thats bluetooth if it matters. It's starting to become really frustrating.

    Settings > Messages > MMS messaging > ON??
    If yes, contact your carrier.

  • What is the mail domain used to send messages ?

    my anti-spam (Cisco Ironport)  locked mail used by Adobe. What is the mail domain used to send messages ?

    Cesarg50409568 what Adobe software or service is your inquiry in reference to?

  • Mail won't send messages.

    Hello, all!
    So I am new to Mac and having a tiny bit of trouble with Mail. I can receive messages, Connection Doctor says the server is fine, but nothing goes out. I called my ISP as it is their e-mail but I can log into the webmail and send/receive from Outlook when forced to. I guess that proves it isn't the server.
    So, I am wondering if there is an update that corrects this problem. I went through the troubleshooting guides to no avail.
    Thank you in advance for any help you can offer. The messages I receive are below.
    SadrianaZea
    From Mail:
    The sender address [email protected] was rejected by the server smtp-server.roadrunner.com.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be delivered.
    From Connection Doctor:
    Mail was able to connect to the internet.
    Roadrunner Connection and login to server succeeded.
    smtp-server.roadrunner.com ; Connection to server succeeded, no login required.
    (There were no details.)

    I figured out 2 things to fix my 2 problems:
    first, I deleted both POP accounts in the prefs and deleted the com.apple.mail.plist in "users/.../library/preferences/. Then I configured the account again, but not automatically, putting the pop and smtp of Yahoo.de. And here comes the difference (I think): I waited to connect to the server (smtp) for a few minutes - last time I cancelled and than I connected again, making the setup eventually skipping the process of connection, as it changed the window in a snap.
    second, I deleted the first message that wouldn´t download, as suggested here: http://discussions.apple.com/thread.jspa?messageID=10034980#10034980.
    Now I´m happy as I could be, but some things still don´t make sense...
    I hope this might help someone else,
    Dani.

  • Mail replies won't send in OS 10.8.3

    Replies to mail messages that have a link within the message won't "send" unless I delete the link and any other messages beneath the message I am replying to .  Message hangs up in activity window . I've checked with my ISP and all is fine there.  My older iMac running OS 10.6.8 mail works flawlessly .  What is going on here?  New messages "send" o.k.   So I'm clueless and bummed about what appears to be some mail glitch on ML.
    Also, what is this new "envelope shaped" mail format with the blue border ?  Is there some option to change the format back to the regular " letter shaped" mail format ?
    Thanks for any help !
    Carolyn.  a.k.a. gladys2

    So far, no big change, but I have figured out how to circumvent the problem by just deleting anything  I'm replying to other than the last message in a group of "back and forth" mail.  (if that makes any sense).  Its a minor hassle, but I'm not willing to risk messing up things by getting into areas where I'm not comfortable.... like messing with the Library.
    I did run Repair Permissions a couple of times after I had tried everything else that was obvious, shut down, unplugged and restarted. I also sent an e-mail to Apple support and told them what I thought about Mail in ML.
    It comforts me somewhat to see that there are a lot of folks out there with the same type problems, each with variations on the theme ! :-)
    I do appreciate all you suggested.  If you come up with any other easy ideas, let me know.  You are a good guy to show concern and try to help !
    Carolyn

  • Mail mess -- won't send

    I'm switching from Thunderbird back to Mail, and I've encountered a problem - it won't send anything. When I click on "New Message" or "Reply" or anything that would send, nothing at all happens. How can I fix that? Thanks!

    I'm switching from Thunderbird back to Mail, and I've encountered a problem - it won't send anything. When I click on "New Message" or "Reply" or anything that would send, nothing at all happens. How can I fix that? Thanks!

  • Mail periodically won't send.

    Three or four times a day Mail won't send an email. The other 40 or 50 attempts to Send Mail work fine. The whirling icon spins beside Outbox, and eventually (maybe three minutes) I'll get a message that Mail can't send the message using the selected server. If I click Try Again, it will typically send the message.
    When Mail doesn't present me with the dialog, I have to quit the application. Upon relaunch, I see an email in the Outbox and I can select it and send it, typically without an error.
    This is a sporadic problem, appearing with Leopard, and remaining consistent through all incremental OS upgrades.
    I use Comcast as my internet provider, and my email is hosted at GoDaddy.
    I have seen other posts with similar problems, but no solutions.
    Ideas? Thanks.

    Greetings,
    It's very doubtful that it's the OS - I have 5 of my own machines, and hundreds at work, and there are no issues with sending mail. I move around a lot from city to city and from state to state and I have yet to have a problem of any kind, much less mail.
    Do a Repair Permissions, and/or trash the .plist files for Mail, clean out the startup items in System Preferences > Accounts > Login Items, and restart the computer. You could also do a "sudo periodic daily weekly monthly" to clean out the cache.
    Some fools leave their computers on all the time, and this will shorten the life of any computer, or anything in general, for that matter. I shut my machines down if I'm going to be away from them or more than an hour or so. I will leave them on over night once a month to run the scheduled maintenance.
    If you leave your machine on all the time, corruption can result in various parts of a machine, it's not usual, but it can happen.
    I run nothing out of the ordinary, like application enhancers, APEs, GROWL, other haxies or any of that junk, nor questionable software, like open source junk, and most of it is just that.
    The only true way to determine where the problem lies is to erase the hard drive and start fresh. Just use software like Office 2004 or 2008, the iWork and iLife stuff. Adobe CS stuff should be Ok, as well as any from the major software folks. Load no junkware.
    Try your email and see if you still have issues. You can add software a little at a time and see when it breaks.
    To say an OS is bad doesn't even make sense to any rational person - there are millions of satisfied users out there that never come to these forums, so that in itself should be a wake up call. There are software issues, from time to time, but by and large, those issues are addressed pretty quickly and Apple would never let something like that fester without addressing it. That's why we have updates from time to time. Most of the issues here, are self generated, one way or another.
    Cheers,
    M.

  • Outlook won't send messages

    my outlook 2007 suddenly won't send emails. I can receive them just fine but get an error message saying:
    Task  Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
    HELP!!!!!

    Hi,
    Please first check if you can send email from web mail. If problem continues in web mail, you'll need to contact your ISP to get further assistance.
    If it works as expected in web mail, it means the problem is related to Outlook side. In this situation, please make sure your SMTP settings is set correctly. See:
    http://support.microsoft.com/kb/287532
    If you installed any antivirus software, please try to temporarily turn off them and test again.
    Besides, this issue may be caused by some other reasons, please refer to the following KB article for more details:
    http://support.microsoft.com/kb/813514
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for

  • How to call pl/sql stored procedure in JDBC query dialogbox

    Hi, how to call pl/sql stored procedure in JDBC query dialogbox(reports 9i) . Cheers, Raghu

  • How to create automatic timer process in BPM?

    Can anyone tell me how to create an automatic timer process in BPM? Can I just create an manual process, and drag the timer event into the swam lane, can connect the timer to the service and then to the end event? Thank you

  • LabVIEW 8.6.1 DSC Module and SQL Server Agent

    I had the following system constellation: - LabVIEW Professional Dev System 8.6.1 installed (complete) - SQL Server 2005 Express Since Microsoft's SQL Server 2005 is no longer distributed, I had to install SQL Server 2008 Express on my system, too. E

  • CC desktop app keeps asking to update.

    Hi all, It's been since the release of photoshop 14.2.1 that the dektop app keeps on asking me to update Photoshop even though the software has been updated (succesfully) straight away. Why is this happnening and how can I stop it? I'm using a 2013 M

  • Blank File Info window

    I'm using Windows XP and InDesign CS 6. Whenever I go to File>File Info... or if I press AltShiftCtrl+I, I get a useless blank File Info window staring at me. It shows up as a gray page and there are no buttons to click on. I have to hit Escape to ge