Mail stores not created automatically
Postfix does not seem to be creating mail stores for users until they log in for the first time. If I send to a user that has not been logged in yet the mail bounces. I will be swapping to my new server over the weekend while users are not in and I don't want everyones mail to bounce for two days while they are out.
Do I have to make all the mailboxes manually or is there a command that can force the creation of mail spools.
Thank you
Chris Buskirk
greetings,
first - postifx just delivers mail, it does not create the users mailbox.
cyrus is your mailbox creator.
sometimes when the mailbox is not created I use webmail to create the mailbox. Most of my systems create the mailstore with no problem. In the past I have had New users access the the Web interface first, to sort of activate their mail account. just to make sure that the mailbox is created.
you can also run a reconstruct on the cyrus database to force the creation.
Similar Messages
-
Excise Invoice Not creating automatically
Hello!
while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
-M.SubaExcise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
Check Customization settings-
IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
select your excise group & choose details,
You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
Regards,
Reazuddin MD -
Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)
The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie -
Settlement rule not created automatically
HI All,
Every time when i create a maintenance order , system did not create settlement rule automatically , when i click on settlement rule it ask with default or without default and cancel , when i click on with default the only settlement rule generated , please tell where is the gap , it should come automatically
Thanks in advance
ArmaanHi You can not create automatically at creation, Please check the following IMG setting to make it mandatory at some point so that system will generate it automatically.
Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders> Functions and Settings for Order Types> Settlement Rule: Define Time and Creation of Distribution Rule
Other wise try User Exit IWO10027
Thanks,
SS -
Outbound delivery not created automatically
Good Day,
A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
What settings should apply to the material as this seems to be the only different input between the two STO.
The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
Thanks
LindsayHi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano -
BDC not creating automatic delivery for consignment fill up in VA01
Hi,
I am doing BDC for consignment fill up in VA01. When munually run VA01, it automatically creating delivery. But when run BDC ( call transaction ) it's not creating automatic delivery. why ? I am giving below fields..
Sales org.
distribution channel
division
customer
item (material)
quantity
batch
pricing condition
price
serial number
please help me...
VenkeyVA01 is order creation, Creating an order does not automatically create a delivery, a delivery is created with VL01N in reference to an order.
Further you should get an error log if you process a BDC, what does it tell you? -
Since i have updated my Iphone 5S to IOS8 or higher, the push mail does not work automatically, i have to refresh manually, I haven't this problem with earlier versions !
I use Microsoft Exchange Mail server.
Even with Iphone 5 and IOS8, the problem doesn't exist !Why would you expect it to work in 8.3, if it didn't work in a previous version? What troubleshooting have you done? Have you tried putting the car system into Pairing mode?
-
Planning File entry not created automatically
Hi,
What could be the reasons for not creating planning file entry automatically for a material..? Its MRP type is P3.
How to check whether all the material in a particular plant is considered for MRP or not..?
Does the transaction MDRE - Consistency Check have any role in this..?
Pls. clarify.
TIA
SabithaDear Sabitha,
In MD21, there are no entries for that material.
It doesn't mean that planning File entry is not maintain for this material.
If non of the tabs of NChge Pln,NChge P Hor, etc are activate then it means there is no req. for this material either with in planning horizon or out planning horizon.
If planning file entry is not maintain for any material then you will get below msg in md21 at the time of execution,
No planning file entry exists for this selection
Message no. 61140
Kindly check and revert back,
Regards,
Dhaval -
SRM Purchase Order not Created Automatically
SRM 7.0 Extended Classic Scenario:
Issue: When creating a standard shopping cart in SRM the Purchase Order is not created in SRM (or in R3). Eventhough the shopping cart is fully approved and has a vendor assigned. The overall shopping cart status remains approved,the line items status shows 'item in transfer process'. Otherwise there are no errors in the application monitor. Nothing appears in table BBP_DOCUMENT_TAB
Considerations: Everything is working fine for limit shopping cart, the PO gets created automatically and the SC has status follow-on document created.
Also, this was working fine for standard orders, it seems that support pack 7 or 8 broke this functionality, yet I do not see any notes regarding the issue. Any ideas on what controls the automatic PO generation or how it could work for limits but not standard SC's would be greatly appreciated.
Thanks,
Matt
Edited by: Matt Joseph on Nov 17, 2010 10:27 AMFirst of all PO should be created then you can see entry in doc table.
u Note 1480994 - How to process a shopping cart with status I1111?
see SAP treatment and some work around..
Symptom
Shopping Cart is stuck in status I1111 (Item in transfer process).
Other terms
Application Monitor, I1112, I1111, Monitor Shopping Cart
Reason and Prerequisites
This is a FAQ note, which shows how to treat such Shopping Carts.
Solution
Shopping Cart status I1111 (Item in transfer process) is a temporary status, which means that shopping cart is being processed in order to generate a follow-on document.
However, it is possible that status I1111 becomes permanent and, in this case, shopping cart status is inconsistent.
There are some procedures to be considered when shopping cart is stuck in status I1111.
Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
Note 441768 provides more information about this report.
However, BBP_ALERT_SB_NOTTRANSFERED works in a time stamp. BBP_ALERT_SB_NOTTRANSFERED will check shopping carts created after date specified in table BBP_CONTROL.
To check this information, go to SE16 -> BBP_CONTROL and as input parameter provide the report name. Here you will see the last date that report has been run.
If you have a shopping cart in status I1111 which is older than date specified in table BBP_CONTROL, you have to change manually the time stamp specified in such table. You have to specify an older date (before shopping cart creation).
Doing this, you can run report BBP_ALERT_SB_NOTTRANSFERED and cart in question will have status I1112 assigned.
Once status I1112 is assigned to shopping cart, you can retransfer it from Application Monitor (BBPWEBMONITOR transaction in SAP_GUI) or Monitor Shopping Cart in the web.
To transfer Shopping Carts from BBPWEBMONITOR, some settings need to be done.
Following notes should be considered:
550044
FAQ Alert monitor RZ20 does not show any alerts
396102
BBP Alert monitor RZ20 does not work
387701
The Shopping Card are not transfered after "resubmit"
According note 387701, workflows WS10000214 and WS10000215 have to be activated. One of them is to delete shopping cart item using Application Monitor and the other one is to resubmit the cart. Then, once this settings are done, you can retransfer I1112 carts from Application Monitor.
If all settings are done and you have a cart with status I1112 that it is not appearing in Application Monitor, report BBP_ALERT_SC_STATUS_ERROR is available, which checks the carts in status I1112 and put them in the Application Monitor, in order to allow you to transfer them again. Note 631513 explains about this report.
Additional notes to be considered in this scenario:
1159609
Transfer function does not create local purchase orders
1233037
BBP_MON_SC: Shopping cart transfer ends in status I1111
1040878
Cannot transfer shopping carts with status I1112
Header Data
Release Status: Released for Customer
Released on: 09.08.2010 16:04:09
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SRM-EBP-SHP Shopping Cart
Secondary Components: SRM-EBP-APM Application Monitors
Affected Releases
Release-Independent
Related Notes
1233037 - BBP_MON_SC: Shopping cart transfer ends in status I1111
1159609 - Transfer function does not create local purchase orders
1040878 - Cannot transfer shopping carts with status I1112 -
PO not created automatically after creation and approval of SC
Hi all,
We are using SRM7.0 Extended Classic Scenario.
We are able to create Shopping Cart successfully.
For items where a source of supply is not supplied, the Shopping Cart goes through the approval process and then into the sourcing Cockpit.
But for the other Shopping Carts, PO is not getting created automatically after the approval of SC.
Any ideas/suggestions on this issue would be highly helpful.
Thanks,
PriyaPriya,
Can you check this configuration in Sourcing for particular PCat?
*Automatic requirement grouping; sourcing for items without assigned*
source of supply:
Then run the report BBP_SC_TRANSFER_GROUPED which will automatically group requirements together for
the creation of a PO.
And, If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
Let us know if it works, and should help you this one.
Thanks,
Rahul Mandale -
AO and VL not created Automatically
Hi All
I am following below tutorial exercise
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
As per the screen shots when i create EO for employee and department automatically AO and VL should be created but that are not created in my case.
I am working on Jdev 11g Rel 1 and Database Oracle 11g
Please let me know am i missing something
Thanks
AJStrange, this works for me. Have you checked that is DB (HR scheam) is set up correctly?
Make sure the the FK constrains are present (they are responsible for the automatic creation of AO and VL).
One other thing it to open a new 'Fusion Web Application', the select the model project and use right click->new->'Business Model from Table' option. This is essential the same the tutorial does, but is uses an other wizard.
Timo -
E-mails are not pushing automatically
I have the I-phone 3G and this past week my e-mails have stopped pushing to my phone. I have it set so that they push out automatically every 15 minutes. I noticed that I havent been getting e-mails so I went into my mailbox and I had 40 e-mails that the server was holding. So now I have to go in and manually check to see if I have any e-mails. Has anyone else had this problem?
Message was edited by: [email protected]If you have the account set to automatically check the incoming mail server for new messages every 15 minutes, messages are not being pushed from the account's incoming mail server. This is a Fetch setting.
The only email accounts that support Push access for received messages with the iPhone's Mail app is an Exchange account accessed via ActiveSync, a MobileMe account, and a Yahoo account that is created with the Yahoo account preset.
Try powering your iPhone off and on and if no change, try an iPhone reset which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so. An iPhone reset does not affect and data or settings.
FYI - unless you don't care about receiving spam, you should not include an email address with a posting at a public discussions area like this and the same for being used as an alias.
Is this problem with your Yahoo account on your iPhone? If so, I have seen more problems reported here in regards to a Yahoo account than with any other email account provider. -
Sent mail mailbox not created with IMAP account
Hello,
I have an old PBG4 running Tiger that i use as a shop/travel/etc. 2nd mac. I have 4 mail accounts. I set them up ( successfully) all the time on various macs and windows machines.
But now something's changed... 3 of my accounts are fine. The 4th shows no "this account" airplane icon mail folder under "sent" int he left hand pane. i even deleted it, re-created it, and its STILL not there. Mail is also not stored to the IMAP server. Yes, in the tab it says "save sent mail to the server..."
At the bottom of the left hand mailbox pane, the "this account" set of mailboxes does appear with a little world/beach-ball to it left. There is a sent mail box there, but it does nto have any (recent) mail in it - just older sent items.
I'm flummoxed. Any idea what is going on? While you're at it, what's the difference between the mailboxes at the *top* and the duplicate at the bottom?
TIA!
GrantSo, VFEMail doesn't show up under sent, but has a Sent box within it below?
I wonder if you quit Mail andin the Finder make a copy of say...
/Users/YourUsersName/Library/Mail/[email protected]@imap.gmail.com/[Gmail]/Sent Mail.imapmbox and dragged it to
/Users/YourUsersName/Library/Mail/[email protected]@imap.VFEmail.com/[Gmail]/
If that'd work?
Hmmm, did we try this yet?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot. -
Query generation is not creating automatically the JOIN statements in 8.6
In SBO 2007A the chosen tables (if more than one) automatically used to get linked through matching INNER or OUTER joins etc.
This is not happening in SBO 8.8 patch 14. Am I missing something? Have I forgotten a step how to get multiple tables to automatically?
Please help. Thanks.Hi Aleem.......
If you are trying to join two tables which are user defined then it doesnt create any inner or outer join automaticallly, not even in previous patches. You have to give it manually. But for standard table if two have relationship then it compulsarily creates join.....
Regards,
Rahul -
Checking my Gmail account - mail is not checking automatically
Hello
I moved my Domain over to Gmail for email hosting. Works great, and the web interface is vastly superior to my old ISP's webmail.
But my iPhone refuses to go get my mail at regular intervals. The phone can check mail with no problems, but it does not do so automatically. I have to actively check for new mail or it will not download anything.
How can I fix this?
ThanksSeems to be a bug in v2.1. There's a long thread on this (so long, in fact, that the Hosts closed it and opened a continuation thread, since the original was too long to display properly in some browsers).
Basically, if the iPhone is asleep and running on battery power, it ignores the Fetch interval specified in Settings, and only checks mail if the iPhone is woken up and used for something (sometimes, the Mail app must be launched).
We're hoping for a fix in v2.2.
EDIT: If you're interested, here are the links to the original thread and the continuation thread. Thanks for the !
Maybe you are looking for
-
Help me to solve this Jsp problem
//Class1.java package p1.p2; public class Class1 implements Serializable private String name1,name2; public void setName1(String name) name1=name; public String getName1() return name1; public void setName2(String name) name2=name; public String getN
-
Hi! I Have one AD Security group for each shared printer, I have one GPP that map the printer if the user is in the security group that belong to the printer. And one GPP to delete the printer if the user is NOT member of the security group. The secu
-
Access Point not visible in UMS server for Application using UMS adapter
Email Driver Properties for email is configured in UMS and works fine which means its able to poll for any incoming Email from the Configured Account. Now i am builiding a soa Composite application and and using UMS adapter to receive that incoming m
-
Cisco CSS 11150 Series switch and DNS Sticky
Hi, I have currently have two internet independent facing CSS11154 switches with two web server farm environment across both of them. I have a single URL that round robins between my internet facing links for these server farms. The application is ba
-
Muse CC won't load after payment, shows Your Trial has ended
I have been using Creative Cloud for about 6 months and as of this morning my Muse CC refuses to load, claiming my Trial has ended. I can load Ps CC and Dw CC fine. I did have a problem with the September payment going through but it went through and