AO and VL not created Automatically

Hi All
I am following below tutorial exercise
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
As per the screen shots when i create EO for employee and department automatically AO and VL should be created but that are not created in my case.
I am working on Jdev 11g Rel 1 and Database Oracle 11g
Please let me know am i missing something
Thanks
AJ

Strange, this works for me. Have you checked that is DB (HR scheam) is set up correctly?
Make sure the the FK constrains are present (they are responsible for the automatic creation of AO and VL).
One other thing it to open a new 'Fusion Web Application', the select the model project and use right click->new->'Business Model from Table' option. This is essential the same the tutorial does, but is uses an other wizard.
Timo

Similar Messages

Excise Invoice Not creating automatically

Hello!
while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
-M.Suba

Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
Check Customization settings-
IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
select your excise group & choose details,
You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
Regards,
Reazuddin MD

Settlement rule not created automatically

HI All,
Every time when i create a maintenance order , system did not create settlement rule automatically , when i click on settlement rule it ask with default or without default and cancel , when i click on with default the only settlement rule generated , please tell where is the gap , it should come automatically
Thanks in advance
Armaan

Hi You can not create automatically at creation, Please check the following IMG setting to make it mandatory at some point so that system will generate it automatically.
Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders> Functions and Settings for Order Types> Settlement Rule: Define Time and Creation of Distribution Rule
Other wise try User Exit IWO10027
Thanks,
SS

Outbound delivery not created automatically

Good Day,
A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
What settings should apply to the material as this seems to be the only different input between the two STO.
The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
Thanks
Lindsay

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

Can not open JPEG files and can not create JPEG files from other software

Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014

Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

BDC not creating automatic delivery for consignment fill up in VA01

Hi,
I am doing BDC for consignment fill up in VA01. When munually run VA01, it automatically creating delivery. But when run BDC ( call transaction ) it's not creating automatic delivery. why ? I am giving below fields..
Sales org.
distribution channel
division
customer
item (material)
quantity
batch
pricing condition
price
serial number
please help me...
Venkey

VA01 is order creation, Creating an order does not automatically create a delivery, a delivery is created with VL01N in reference to an order.
Further you should get an error log if you process a BDC, what does it tell you?

DBCA errors and do not create DB

While I try to create DB using Oracle 9i DBCA, I get error that /etc/oratab file doesn't exist and do not create DB on Unix tru64.
I already have many DBs on the server, I need to create a small test DB.
I see the oratab file exist but is renamed with suffix like oratab_h
now how do I point DBCA to that oratab file. I dont want other db to be disturbed if i run root.sh file.
any suggestions, shall rename the oratab to original name or run root.sh? what the best solution.
This looks like Oracle RAC version of DB Software.
When i open DBCA i get option like:
What type of database would you like to create or administer?
1) Oracle cluster database
2) Oracle Single instance database
I found no diff in both the options to create DB.
Appreciate sugestions.
Thanks

*** Duplicate Post ***
KN ... it is not acceptable to repost the same question. If no one answers it is because they don't know the answer or don't wish to answer (we are all volunteers).
Thank you.

Hi, My iPad has iOS 5.1.1 and is not updating automatically. Yes I reconfigured as it came yesterday

Hi, My iPad has iOS 5.1.1 and is not updating automatically. Yes I reconfigured as it came yesterday

I thought about that, but where he states that "Yes I reconfigured as it came yesterday," I assumed that this was a new iPad 2 that he just received yesterday. The tagline shows iPad 2, FWIW.
However, your assumption may be probably is correct.

PO not created automatically after creation and approval of SC

Hi all,
We are using SRM7.0 Extended Classic Scenario.
We are able to create Shopping Cart successfully.
For items where a source of supply is not supplied, the Shopping Cart goes through the approval process and then into the sourcing Cockpit.
But for the other Shopping Carts, PO is not getting created automatically after the approval of SC.
Any ideas/suggestions on this issue would be highly helpful.
Thanks,
Priya

Priya,
Can you check this configuration in Sourcing for particular PCat?
*Automatic requirement grouping; sourcing for items without assigned*
source of supply:
Then run the report BBP_SC_TRANSFER_GROUPED which will automatically group requirements together for
the creation of a PO.
And, If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
Let us know if it works, and should help you this one.
Thanks,
Rahul Mandale

Planning File entry not created automatically

Hi,
What could be the reasons for not creating planning file entry automatically for a material..? Its MRP type is P3.
How to check whether all the material in a particular plant is considered for MRP or not..?
Does the transaction MDRE - Consistency Check have any role in this..?
Pls. clarify.
TIA
Sabitha

Dear Sabitha,
In MD21, there are no entries for that material.
It doesn't mean that planning File entry is not maintain for this material.
If non of the tabs of NChge Pln,NChge P Hor, etc are activate then it means there is no req. for this material either with in planning horizon or out planning horizon.
If planning file entry is not maintain for any material then you will get below msg in md21 at the time of execution,
No planning file entry exists for this selection
Message no. 61140
Kindly check and revert back,
Regards,
Dhaval

SRM Purchase Order not Created Automatically

SRM 7.0 Extended Classic Scenario:
Issue: When creating a standard shopping cart in SRM the Purchase Order is not created in SRM (or in R3). Eventhough the shopping cart is fully approved and has a vendor assigned. The overall shopping cart status remains approved,the line items status shows 'item in transfer process'. Otherwise there are no errors in the application monitor. Nothing appears in table BBP_DOCUMENT_TAB
Considerations: Everything is working fine for limit shopping cart, the PO gets created automatically and the SC has status follow-on document created.
Also, this was working fine for standard orders, it seems that support pack 7 or 8 broke this functionality, yet I do not see any notes regarding the issue. Any ideas on what controls the automatic PO generation or how it could work for limits but not standard SC's would be greatly appreciated.
Thanks,
Matt
Edited by: Matt Joseph on Nov 17, 2010 10:27 AM

First of all PO should be created then you can see entry in doc table.
u Note 1480994 - How to process a shopping cart with status I1111?
see SAP treatment and some work around..
Symptom
Shopping Cart is stuck in status I1111 (Item in transfer process).
Other terms
Application Monitor, I1112, I1111, Monitor Shopping Cart
Reason and Prerequisites
This is a FAQ note, which shows how to treat such Shopping Carts.
Solution
Shopping Cart status I1111 (Item in transfer process) is a temporary status, which means that shopping cart is being processed in order to generate a follow-on document.
However, it is possible that status I1111 becomes permanent and, in this case, shopping cart status is inconsistent.
There are some procedures to be considered when shopping cart is stuck in status I1111.
Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
Note 441768 provides more information about this report.
However, BBP_ALERT_SB_NOTTRANSFERED works in a time stamp. BBP_ALERT_SB_NOTTRANSFERED will check shopping carts created after date specified in table BBP_CONTROL.
To check this information, go to SE16 -> BBP_CONTROL and as input parameter provide the report name. Here you will see the last date that report has been run.
If you have a shopping cart in status I1111 which is older than date specified in table BBP_CONTROL, you have to change manually the time stamp specified in such table. You have to specify an older date (before shopping cart creation).
Doing this, you can run report BBP_ALERT_SB_NOTTRANSFERED and cart in question will have status I1112 assigned.
Once status I1112 is assigned to shopping cart, you can retransfer it from Application Monitor (BBPWEBMONITOR transaction in SAP_GUI) or Monitor Shopping Cart in the web.
To transfer Shopping Carts from BBPWEBMONITOR, some settings need to be done.
Following notes should be considered:
550044
FAQ Alert monitor RZ20 does not show any alerts
396102
BBP Alert monitor RZ20 does not work
387701
The Shopping Card are not transfered after "resubmit"
According note 387701, workflows WS10000214 and WS10000215 have to be activated. One of them is to delete shopping cart item using Application Monitor and the other one is to resubmit the cart. Then, once this settings are done, you can retransfer I1112 carts from Application Monitor.
If all settings are done and you have a cart with status I1112 that it is not appearing in Application Monitor, report BBP_ALERT_SC_STATUS_ERROR is available, which checks the carts in status I1112 and put them in the Application Monitor, in order to allow you to transfer them again. Note 631513 explains about this report.
Additional notes to be considered in this scenario:
1159609
Transfer function does not create local purchase orders
1233037
BBP_MON_SC: Shopping cart transfer ends in status I1111
1040878
Cannot transfer shopping carts with status I1112
Header Data
Release Status: Released for Customer
Released on: 09.08.2010 16:04:09
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SRM-EBP-SHP Shopping Cart
Secondary Components: SRM-EBP-APM Application Monitors
Affected Releases
Release-Independent
Related Notes
1233037 - BBP_MON_SC: Shopping cart transfer ends in status I1111
1159609 - Transfer function does not create local purchase orders
1040878 - Cannot transfer shopping carts with status I1112

Material problems and PO not created

Hello,
SRM Classic Scenario.
We tried to create shopping cart with a material in ECC and in SRM (can be viewed in COMM_PRODUCT)
SC is in Approved status but "Contains Errors" as well. Checked the Backend Application Error > Alert Display in RZ20 (SRM side)
Shopping cart 0010000387 (PReq. 0090000012): ME 060 No procurement defined for material 100-ABB 9015C
For any other material only PR is created. Material number is not passed on to PR from catalog and PO is not created. Checked number ranges (SRM and ECC), back end document types, system type.
Pls advise.
Thanks

Hi,
1)Please check in SAP R/3 whether in Material Master (Purchasing View is there).
2) Please check whether you have created the Shopping Cart using DESCRIBE REQUIREMENT (.i.e) without material no
If the material no is there in the catalgo if will flow in the SC
G.Ganesh Kumar

Secure Store Service Application takes a lot of time and does not create the database

Hi everybody,
I was trying to configure sharepoint performance point and I was following the instruction. After I created the performance point services application I tried to creat the secure store service application. When I do this, the progress window stays open forever
even after 2 hours. If I close the window, I will see that the secure store service and proxy app is created and the application pool also is created in IIS but the database is not and the application service is stopped. even when I want to delete it, it's
the same story and the progress window stays until I close it manually. Nothing has been logged in the event viewer because it doesn't throw any exceptions.
I don't think that I have permission issues on the database server side because I have created the performance point service app and the database is there. I have used the same credentials to crete the secure store.
I have restarted the secure store service and IIS for many times and even the server itself.
I'm wondering if anybody has had this issue because I couldn't find anything on the web.
Thanks,
Edwin

Alex, please ignore my previous answer. I found more information in the ULS. At the time that I started creating the service application by power shell these things are logged and they are repeated several times:
it starts with:
11/13/2013 15:19:55.52 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj6 High
Creating Secure Store Service Application 'Secure Store Service Application'.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj9 Medium
Creating "database object" 'SP_SecureStore' for application. At this time database is not created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk0 Medium
Saving "database object" 'SP_SecureStore' in the config db.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.83 w3wp.exe (0x0944)
0x0DB4
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 SPUCWorkerProcessProxy.exe (0x13A0)
0x02B0
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wl Verbose
Tracker not started because call not made from Service Host.
11/13/2013 15:19:55.83 WebAnalyticsService.exe (0x0A6C)
0x1B88 Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
Finally it says:
11/13/2013 15:19:55.90 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk9 High
Secure Store Service Application 'Secure Store Service Application' created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d

Tax And pricing not calculating automatically on Purchase Order

Hi All,
While creating a Purchase order the Taxes are not calculating automatically .We need to manually enter the Tax on the Purchase order .The quantity conversion is not flowing properly so it is effecting the invoice receipt (not distributing the tax on the invoice.Can any one please tell me the problem or the configuration to check this issue .
Thanks in Advance

Hi
Please check all these below setting.
1) Which tax procedure using.
If TAXINJ - Then check tax code using FTXP for valid tax code which you are using in PO.
2) If TAXINN then check FV13 - for key combination such as Vendor /Material/Plant or Tax classification or Tax code/Vendor.
depending upon your are using.
3) Check Tax code is assigned to co code in Logistics - General-Tax on Goods Movements-India Condition-Based Excise Determination-Assign Tax Code to Company Codes
4) Check J1ID for material & Chapter ID, Vendor Excise details, Excise determination.
Once all this is ok then tax value will flow in to PO.
Regards
Sudhir

Mail stores not created automatically

Postfix does not seem to be creating mail stores for users until they log in for the first time. If I send to a user that has not been logged in yet the mail bounces. I will be swapping to my new server over the weekend while users are not in and I don't want everyones mail to bounce for two days while they are out.
Do I have to make all the mailboxes manually or is there a command that can force the creation of mail spools.
Thank you
Chris Buskirk

greetings,
first - postifx just delivers mail, it does not create the users mailbox.
cyrus is your mailbox creator.
sometimes when the mailbox is not created I use webmail to create the mailbox. Most of my systems create the mailstore with no problem. In the past I have had New users access the the Web interface first, to sort of activate their mail account. just to make sure that the mailbox is created.
you can also run a reconstruct on the cyrus database to force the creation.

AO and VL not created Automatically

Similar Messages

Maybe you are looking for