Mail Type size settings don't work.

Regardless of 5 type size options selected there is no change in the final message type size.  It stays small!

I've set up the preferences for my account as follows:
and have set up this rule:
Don't know if that would work for you or not.

Similar Messages

  • My screen display settings don't work right

    My screen display settings don't work.When i try to set to not sleep it still sleeps.When i set to sleep and show pictures it works for a few mins then sleeps and won't scroll my pics at all just a black screen.Why? Does anyone else have this problem?

    Screensaver (e.g., showing pictures instead of the desktop) and Display Sleep and Computer Sleep are all set independently. You need to be sure that you have set each and every one of these correctly or you will get unexpected results.
    There is also the ability to require a password after an interval, and that is also independent of all the others, and is in
    system preferences > security.

  • When i'm in safari, if i hit command   to make the type bigger safari doesn't rememberthis setting after i close the site and reload it.  in chrome this happens automatically.  can i make safari remember my type size settings automatically?

    when i'm in safari, if i hit command  +   to make the type bigger safari doesn't remember this setting after i close the site and reload it.  in chrome this happens automatically.  can i make safari remember my type size settings automatically?

    That is normal Safari behavior.
    May be this will help.
    Safari > Preferences > Advanced
    Accessibility:   Never use font sizes smaller than
    Default is 9.    Click the downward arrow and select a larger font size.
    Put a check mark in the box to enable it.

  • Outlook Express 12-28-11 Email Changes to Settings don't work

    Verizon Email of 12/28/11 told us to make changes to Portal settings of Outlook Express
    The intro tells us how much they want to "enhance our online experience". Then at the bottom, they tell us to not respond to the email. Why don't they have a return email when people start having problems? Probably because they would be swamped with complaints.
    Worked on this o ver two hours yesterday on my 4 email accounts on 3 computers
    As usual, the Verizon instructions are wrong at http://verizon.com/emailsettings
    They must never test this stuff before they publish it
    Per the above instructions, I changed the  Outgoing Portal to 465 and checked the SSL box for that portal
    Set the Incoming Portal to 995 from the existing 110 and checked that SSL box
    Outlook express would time out waiting for Verizon to connect for outgoing messages
    I had changed the Outgoing Portal to 587 per Verizon instructions in 2009 (I document everything and keep it!)
    So, I reset that with the Outgoing SSL still checked: still timed out
    Unchecked the Outgoing SSL and everything worked
    The settings that are working now:
    Outgoing Portal 587 with SSL unchecked
    Incomong Portal 995 with SSL checked

    I agree - so much of what Verizon does, doesn't work. Their instructions for Windows Vista, Windows Mail say:
    Setting up and updating your Verizon Online email with Vista™ Windows Mail Setting up
    Open Mail.
    From the Tools menu, select Accounts.
    Select Add.
    Select Email Acount and then click Next.
    Enter the name to be displayed on outgoing messages and then click Next.
    Enter your email address, and then click Next.
    Type incoming.verizon.net in the Incoming mail (POP3)field.
    The Incoming Server (POP3) should be set to 995.
    For Incoming mail (POP3), check the box that says “This server requires a secure connection (SSL)”.
    Type outgoing.verizon.net in the Outgoing mail (SMTP) field.
    The Outgoing Server (SMTP) should be set to 465.
    For Outgoing mail (SMTP), check the box that says “This server requires a secure connection (SSL)”.
    Click Next.
    In the User namefield, type your Verizon Online user name.
    In the Passwordfield, type your password.
    Check the Remember passwordcheckbox. (If you do not check this box, you'll be prompted for the password when you access your mailbox.)
    Click Next and then click Finish to close the window.
    However, when you get to the "setup email servers" page at step 7 there is no check box forselecting an SSL connection for either Incoming Mail or Outgoing mail. Aside from the POP3 dropdown and the 2 address boxes, there is only a 4th box where you can check "Outgoing server requires authentication". Whazzup? What Windows Mail setup are they looking at?
    Given the problems people are having, I guess the best thing is to ignore the Verizon email warning and when it fails, just switch to Comcast.

  • Type size short cut not working in CS6

    Hello everyone.
    I've recently upgraded to CS6 and the up and down arrows in the type size box are greyed out and unclickable.
    Does anybody know why this is so?
    Many thanks!

    I have an iPhone 4 with current iOS.
    I've noticed this over the past few months. I always notice it on the FB app. My short cuts stop working. I will check email or note. I figured restarting the phone would fix it.
    Here's the thing. Obviously I use FB a lot, but this short cut issues never happens in text messages, Whatsapp, or email. Always with FB.
    In fact I noticed that I get sluggish typing performance typing using the FB app whether I use the keyboard short cuts or not.
    Just wondering if this common among iPhone 4 users.

  • Your new email settings don't work...

    I recently received an email from Verizon directing me to a website to update my email server settings.  I'm 99% sure this was a genuine Verizon email so I tried their suggestions to change my POP3 and Outgoing server names and port numbers.  The new settings DO NOT work - either outgoing or incoming.  So I set them back the way they were.
    What's up with that??

    If you were trying to activate SSL on the 1/5-1/6  then the problem was with some Verizon servers.
    It should work again now.
    The reason for using SSL is that your mail is then sent/received encrypted.  Without SSL its all in the clear between you and Verizon's servers.  Its particularly important to use SSL if you are not always using your home connections, e.g. from Laptops and other portable devices.
    Only difference in the settings should be the port numbers and the SSL setting.
    Various people have mentioned running into problems and solved them by.
    Reviewing and correcting mistakes in their settings
    Closing and reopening their Mail program.
    For certain devices, restarting their devices
    Checking their firewall settings
    Increasing the timeout value in their mail program
    One known problem introduced by using SSL is that many SPAM detectors no longer work.  At least one that works requires that you leave the mail settings in your mail program alone, but then configure the change instead into the anti-SPAM program.  I.e, it with communicate with SSL but the mail program within your machine receives in the clear.

  • Playback Output settings don't work

    Playback Output settings are not working properly with one particular user account on a shared Mac. FCP is not routing video and audio to the external monitor and speakers even though the correct playback settings are set in the A/V Devices tab of Audio/Video Settings. FCP routes video only to the Mac's screen and audio to the Mac's internal speaker.
    With all other user accounts on the same Mac, with the same settings in the Audio/Video Settings, the playback works fine.
    What am I doing wrong?

    Try all this:
    #8 External Monitor Viewing.
    Shane's Stock Answer #8:
    A simple path is mac > firewire > camera or deck > rca cables > tv
    Then start up your camera and tv, then open fcp.
    Then go View > External video > all frames
    Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
    Shane

  • Email settings don't work, can't receive or send email

    No matter how many times I change my Outlook email settings for Verizon, the new settings have never worked.  I used to be able to at least receive email, but for many months I have not been able to send email.  I have called support and emailed Verizon and no one has been able to help.
    So now as of 11/11/2013, I can't receive or send email and I have tried to change my settings to the new settings, and nothing works.  I have gone to verizon.com/emailsettings for step by step instructions, all to no avail.
    I also have comcast.net and my own website email in Outlook  and now NONE of my email accounts work as of 11/11/2013.  It appears Verizon is the key to my problems.
    Any thoughts?

    Maryde wrote:
    No matter how many times I change my Outlook email settings for Verizon, the new settings have never worked.  I used to be able to at least receive email, but for many months I have not been able to send email.  I have called support and emailed Verizon and no one has been able to help.
    So now as of 11/11/2013, I can't receive or send email and I have tried to change my settings to the new settings, and nothing works.  I have gone to verizon.com/emailsettings for step by step instructions, all to no avail.
    I also have comcast.net and my own website email in Outlook  and now NONE of my email accounts work as of 11/11/2013.  It appears Verizon is the key to my problems.
    Any thoughts?
    Verizon should have no impact on your ability to use Outlook with your comcast.com account.  Verizon is only providing the pipe to Comcast, and I can get there there just fine.  Something must have been changed in your Outlook setup for your Comcast account (which is separate from the settings for your Verizon account) or Comcast must have changed something that broke your Comcast settings.
    If you provide your exact Outlook settings (inbound and outbound including servier names, ports, and SSL settings), perhaps someone can help.
    Also, can you successfully use the Verizon webmail to access your mailbox?

  • Windows Power Management settings don't work with ITunes

    Purchased a refurbished Dell Optiplex system a few weeks ago with a 3.2 Ghz Pentium processor, 1 gigabyte of RAM, and 160 GB of hard drive - so a nice, new, fast system running Windows XP.
    I set my Power Management settings to go to screen saver after 20 minutes, and power down after 45 minutes. It worked just fine for a month, and the day I downloaded Itunes onto this computer, those settings do not work.
    I have reset them.
    I have changed them (to as little as one minute).
    I have changed them back to the original settings.
    I have rebooted my computer.
    I have run 2 different spyware programs (Spybot and Adaware) as well as run an anti-virus scan (TrendMicro Housecall).
    Nothing has changed, and my only conclusion is that Itunes is somehow interfering with the power settings for my computer and monitor. This is rather frustrating, as I'd like my computer to shut off on its own if someone walks away (I can't trust my kids to log off on their own).
    Any ideas on what the problem might be?

    Hi, I just bought my iPhone a couple of days ago and am having the same problems.
    I have a Macbook at home, but need to be able to sync with my work computer for contacts and calendar. At work I'm running on Windows XP Pro SP 2 and MS Outlook 2003 SP 3. I've made sure to update all MS software. I'm running on iPhone 1.1.3 and iTunes 7.6.
    My contacts sync fine, but, so far, no luck with my calendar. I've gone through the trouble of completely deleting everything off my calendar and am trying "test" appointments to no avail. What's really frustrating is that I've logged out of my ID on this computer and logged in using a test ID. I can successfully sync a test appointment following those steps.
    Tech support tells me that since I'm successful under those conditions, it must be a corrupt entry on my main calendar. But, as I've mentioned, I deleted everything I can find off my main calendar and am still not able to get it to sync successfully.
    This is quite frustrating.

  • Using Firefox on a iMac OS-X; the settings used through Google labs in gmail, composing mail font settings don't work.

    I'm using 'DEFAULT TEXT STYLING" in Google LABS. Any setting you make here are not available in composing email.
    == URL of affected sites ==
    http://mail.google.com/mail/?shva=1#settings/labs

    I found the answer on another thread. So far it works, but it remains to be seen
    https://discussions.apple.com/message/23500944#23500944
    1) Quit Mail.app.
    2) Log into Gmail in your favorite web browser.
    3) Click on the gear menu and select "Settings".
    4) Click on the "Labels" tab.
    5) Under "System Labels", next to "Drafts", click on "show if unread" and uncheck the "Show in IMAP' box.
    Now disable "Store draft messages on the server":
    6) Launch Mail.app.
    7) Select Mail > Preferences...
    8) Click on the "Accounts" button in the toolbar.
    9) Click once on the account name and then click the "Mailbox Behaviors" tab.
    10) Uncheck the "Store draft messages on the server" box.
    11) Close the window and opt to save your changes when prompted.

  • HT4864 I'm using Mail 4.5 and Snow Leopard 10.6.8; the posted settings don't work

    Are there any settings for IMAP mail that work with iCloud accounts. I have MobileMe mail accounts but all devices are not running Lion.

    Download the Mac OS X 10.6.8 Update Combo
    Then use Pacifist to extract the Safari app from the v10.6.8 .dmg folder.

  • Print Settings Don't Work

    Update: This turned out to not be a Photoshop problem. I reverted to an earlier Restore Point in Windows and all is now well. Thanks!
    When I click Print Settings under Printer Setup and choose my paper type, resolution, size, orientation, and color management settings, they do not take effect after I click Okay.  Despite what I set, if I go back through Print Settings, the default settings are still there (Plain page, Normal-360dpi, default color mangement). If I print, dreadful color results.
    PS CC 64-bit Setup: In the main Photoshop Print Settings dialog box, I am using Photoshop Manages Colors, my specific printer profile, Normal Printing, Relative Colorimetric, and Black Point Compensation. In the Printer Setup section, my color printer is selected (Epson 2200). PC: Win 7 (64-bit), i7 3.40 GHz, RAM 16 GB. PS and Windows are on the SSD, with data on the HD.
    The same problem occurred with CS6 before I went to CC.
    Needless to say, I can't print. I'll appreciate your help--haven't seen anything like this and can't find anything about it on the Web.

    Timmy, since Microsoft no longer supports WMP 9 for Mac, you should just use Flip4Mac or VLC or other third party Windows Media player.
    I don't know how migrating from a PPC iMac system to an Intel-based iMac works, but you probably have a lot of non-Universal files on board your Intel-based iMac and that could be a problem.

  • Logging File Settings Don't Work

    Well, the Topic Summary above seems to explain the problem.
    We are trying to limit the size of the log files to 1000 KB (1 MB).
    We also want to keep 10 archived copies. Here are the settings that
    are being used:
    Maximum File Size (kb) 1000
    Maximum Number of Archives: 10
    For some reason the cfserver log file does not stop at 1 MB
    has reached over 6 MB.
    Any ideas? And as always, Thanks in Advance!!
    PS: And yes we are saving the settings before closing the
    Administrator.

    Thanks Grizz, but we are running 6.1 with all of the latest
    updates and Hot Fixes. I work for a state orgainization for their
    unemployment web site, and they upgrade not when a new release is
    issued, but when they can financially justify the expense.

  • New email settings don't work

    I've been warned 3 times to change my email server settings to pop.verizon.net and stmp.verizon.net.
    Each time I do this, my Mac Mail shows I'm not connected to any network. Consequently, I get no mail. What's up wth that?
    When I switch it back to the "wrong" setting, it works again.
    Related or not: I use a virtual address, and my email stopped forwarding sometime between 6:30 and 7:30pm last night. This has never happened before, in years of using this system.
    Additionally, the InHome Assistant does not recognize my Verizon User ID. The Email Assist online tells me how to set up a NEW account, not to fix my current one. Sure would like to get some help...
    Solved!
    Go to Solution.

    Many have reported similar issues, . Deleteing the existing  email acct. then creating it fresh seems to work. You may also need to delete keychain for the old accout settings.
    these the new settings:
    Server
    Current Setting
    New Setting
    SSL Enabled
    Port
    POP3 Server
    incoming.verizon.net
    pop.verizon.net
    YES
    995
    SMTP Server
    outgoing.verizon.net
    smtp.verizon.net
    YES
    465
    You may have to reinstall Inhome but as many have advised nearly all the features contained in it are available via online.
    PS. when you say virtual address do you refer to an alias?
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • My ATT email settings don't work, any suggestions?

    Although I have connected my AT&T email to my iPhone and iPad in the past, they have stopped working.  I now am unable to get a connection to AT&T email using their settings.  I have even used the new servicers, outbound.att.net and inbound.att.net to no avail.  I have tried it with and without SSL.  the message just keeps saying that my username or password is incorrect, and I know that this is not true.  AT&T refuses to help with email connections to any mobile device.  Does anyone have any suggestions?

    All, I have this same problem and has just solved it on my iPhone.
    I read up on the problem at att.com/esupport and arrived at the link below:
    https://www.att.com/esupport/article.jsp?sid=KB413495#fbid=ahhj00ALH45
    "If your email address is linked to your AT&T Access ID, changing your AT&T Access ID password automatically changes your email password to the same password. 
    If you use your email address as your AT&T Access ID, changing your email password automatically changes your AT&T Access ID password to the same password."
    I have a ATT Uverse (for my internet access) acct and could not log on so I requested for password reset. They sent me temp password and I had to change my password to my Uverse acct. I use my att.net email as the log on for my Uverse acct. Per att instructions above, my Uverse acct is linked to my att.net email, so now my att.net email pw has been changed to the pw for my Uverse acct.
    Accordingly, go into your iPhone Settings, Mail, Contacts, Calendars, choose your Att.net mail acct and change your password.  In my case I changed it to the new pw I had set up for my Uverse acct and it works.
    Before doing this, I had also added new servers as shown below. The way I see it because your iPhone will try in succession to log on to each server from top to bottom of the list, it's best to add all the mail servers.
    smtp.mail.yahoo.com
    smtp.mail.att.net
    outbound.att.net
    Please note that I did not have to add "imap.mail.att.net" and my Att.net mail on my iPhone still works.
    Hope this helps.

Maybe you are looking for