Mails struck in Drafts folder after Transport Agent installed in Exchange Server 2013

Hi all,
I created Transport Agent and installed successfully in exchange server 2013.
After that mails are struck in drafts folder.
I thought because of My Custom transport Agent , then i Uninstall Transport agent.
but still no use.
I restart Microsoft Exchange Transport Service and restart my server also.
Here is the code i used
public sealed class MyAgentFactory : RoutingAgentFactory
public override RoutingAgent CreateAgent(SmtpServer server)
return new MyAgent();
public class MyAgent : RoutingAgent
public MyAgent()
this.OnSubmittedMessage += new SubmittedMessageEventHandler(this.MySubmittedMessageHandler);
public void MySubmittedMessageHandler(SubmittedMessageEventSource source, QueuedMessageEventArgs e)
e.MailItem.Message.Subject = "This message passed through my agent: " + e.MailItem.Message.Subject;
I search in google about mails struck in drafts folder, all replies are
restore Default Receive Connectors. How can i restore it.
here is the link i see
http://community.spiceworks.com/topic/309145-exchange-2013-messages-stuck-in-drafts

Hi Martina
Miskovic,
Here I am facing some weird situation.
Mails again stuck in Drafts folder.
i didn't installed anything. just checking again after some
time gap .
I tried again by restarting all services
, but no use.

Similar Messages

Fresh install of Exchange Server 2013 on Windows Server 2012 R2 Blank screen after install

Attempting to log in to the OWA I get a white screen immediately after entering credentials
When I open the Exchange Management Shell I get the error
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
Along with the above error it also says Access is denied
Im running the Exchange shell as admin
There were no errors during the install and I did everything according to the Exchange Server Deployment Assistant
At first when I attempted to log in it would say my credentials were incorrect
This is part of a active directory set up and I fulfilled all of the active directory piece.

Hi,
According your post, I understand that open EMS with error “AccessDenied,PSSessionOpenFailed” after fresh install Exchange 2013.
If I misunderstand your concern, please do not hesitate to let me know.
Please follow below steps for troubleshooting:
1. Reboot the server, usually fixes this error.
2. Make sure your authentication settings on your virtual directory for PowerShell is correct.
Internet Information Services (IIS) Manager, <Servername>, Sites, Default Web Site, PowerShell and in the right panel, scroll down to the Authentication module, then make sure that Anonymous access is disabled and Windows Authentication is
enabled.
3. Double check the configuration of HTTP binding on Default Web Site in Internet Information Services (IIS).
4. Run Get-User Identity | FL *power* to check whether the current logged in user has remote powershell enabled.
If the issue persists, please try to remove the PowerShell virtual directory and renew for testing.
Additional, I find an similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/windows/en-US/29b3284a-36e1-43b0-87b8-63ee4500f265/exchange-2013-ems-throwing-access-denied-error-and-toolbox-giving-mmc-error?forum=exchangesvradmin
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

Mail flow completely broken after upgrading Exchange Server 2013 CU3 (Build 775.38) to Exchange Server 2013 SP1 (Build 847.32)

internal mail flow completely broken.
external mail flow completely broken.
i upgraded exchange server as follows:
1. setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
3. upgraded the exchange server with GUI installer
also considered this: http://support.microsoft.com/kb/2938053/en-us
receive connectors :
Transport Service couldn't start, then i disabled hub transports, and it starts, but no mail flow on port 25. according to this:
http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
i didn't have any success to fix mail flow, any solution?

Hi Alireza
The above tech-net http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
will be applicable only if we get these events in the app log 1019,1018,1036,4999
You can check the transport service is running in which service account - Local or network
It should be running in network account by default.
You can run get-transportagent and check if there are any transport agents installed
If you find them then disable all the transport agents that you have installed on the Exchange servers by running disable-transportagents
Disable the antivirus if you have any installed.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Exchange Server 2013: no send/receive after failed CU1- CU2 and machine restore

Hi!
For several reasons, I decided to fully restore my Exchange Server 2013 machine today.
The machine is virtualized on Hyper-V.
I rebooted the server and recovered from backup and Exchange seems to be working fine. However, I cannot receive or send mail. If I try to send a message it goes to the "drafts" folder. OWA and EMC is working. I can not send mail between interna mailboxes
either. Outlook says disconnected.
When running the Exhchange Connectivity Analyzer, I get the following:
- Receive: Connection was successful but no banner was received.
- Send: Successfull. However when trying to send mail to external mailbox it does not reach that mailbox.
Mailflow was working perfectly at the time of the backup.
Help is much appreciated!
UPDATE 1: When telnet on local server i get SMTP banner. But not on other computers in same subnet.

OK. After fiddeling around in ADSIedit and trying to rebuild my Exchange environment I ended ut breaking it completely.
I then restored both my DC (Exchange schema CU2) and my EX (Exchange schema CU1). Scema Versions where the inconsistent as stated.
Then I uninstalled the KB2874216 successfully. After that i tried to Upgrade Exchange to CU2. The Upgrade failed at Mailbox Role: Mailbox Service With error Message:
The following error was generated when "$error.Clear();
          if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
            if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
              $sysMbx = $null;
              $name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
              $dispname = "Microsoft Exchange";
              $mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
              if ( $mbxs.length -eq 0)
                $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                if ($dbs.Length -ne 0)
                  $arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
                  if ($arbUsers.Length -ne 0)
                    $sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
              else
                if ($mbxs[0].DisplayName -ne $dispname )
                   set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
                $sysMbx = $mbxs[0];
              # Set the Organization Capabilities needed for this mailbox
              if ($sysMbx -ne $null)
                  Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
                  set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
                  # No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
                  # This can be remove after BUG(O15#2555914) is fixed.
                  if ($sysMbx.RetentionPolicy -eq $null )
                     $arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
                     set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
              else
                Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
            else
              write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
        " was run: "Database is mandatory on UserMailbox. Property Name: Database".
Seems the problem was corrupted arbitrary system mailboxes from previous Exchange 2010 to Exchange 2013 migration.
The solution for me was to restore the corrupted arbitrary mailboxes using this
LINK. It is for 2010 but Works on 2013.
I am now currently on Exchange CU2 on both my EX server and on my DC. Now I have to check mail flow and will report back.

Exchange Server 2013 - Send E-Mail

I am very new to Exchange Server. I managed to install 2013 and I can send e-mail on-premises with no problem. When I follow what I believed to be the step-by-step instructions for connecting a Send Connector so I could send e-mail on-line I
can't get it to work. I set it up and try an e-mail and the e-mail just sits in the drafts folder forever (as in 2 days now). I can't send any other e-mail now either. They just sit in the drafts folder.
Finally I try to delete the on-line draft message and it won't delete. I delete the Send Connector and the draft finally will delete after nearly 10 hours. I can again send on-premises e-mail but nothing else.
Can someone be kind enough to step an old man through the exact process needed in order to set up and send and receive e-mail to the internet?
Greatly appreciated.
dave

It looks to me like I'm going to have to give up. I understand a lot of what you post, but I can't get the same results. (see my attachment). I wish I had some step-by-step tutorials available that I could learn from instead of trying to
fit bits and pieces of a puzzle together without having all of the pieces.
Looking at my previous post. Did I set up the DNS addresses properly on my Domain Server? Am I accessing them correctly from the Exchange Server? I don't know.
Attached is a Word document that shows what I get when I follow your above instructions. I can do the NSLOOKUP, set type=MX and then Rowley.xyz, but then nothing else is the same. If I can't get the same results you do, then I can't go anywhere.
Everyone had to start at the beginning and learn, but I'm totally lost now as to what would be the starting point and each subsequent step.
Thank you for your assistance. If I could get the answers to the DNS questions above I will try again from scratch.
I realize it's not you, it's me, someone who is trying to learn something new without a "guide book" to work from and without a "mentor/instructor". I have purchased and read several books on Server 2012 and Exchange Server 2013,
just to get this far, but no further.
dave

Exchange Server 2013 does not deliver mail as they arive.

I need Help and guidance on this problem. I have installed Exchange server 2013 with SP1 on Server 2012. Install Went perfect no error. It on a server with 2 TB storage. 16G
memory. Exchange 2013 is the only application running on the box. DNS service is also running on the box. I can see the mail arrive in the mail Box Queue with the Queue Viewer and they would just sit there and then after a 15 to 30 min delay it release the
mail to the mail boxes. The only error or warning I am seeing in the logs are the 6002 warning. Any suggestion would be greatly appreciated.

Please share message header of one of the delayed message. It will help to narrow down the issue.
Do you see any connection failures in connectivity logs.
Do you have multiple 2013 servers in your exchange environment ?
Lets fix it.
Received: from Xchngsvr.A.com (xxx.xxx.xxx.xxx) by Xchngsvr.a.com
(xxx.xxx.xxx.xxx) with Microsoft SMTP Server (TLS) id 15.0.847.32 via Mailbox
Transport; Fri, 25 Apr 2014 13:31:33 -0400
Received: from Xchngsvr.a.com (xxx.xxx.xxx.xxx) by Xchngsvr.a.com
(xxx.xxx.xxx.xxx) with Microsoft SMTP Server (TLS) id 15.0.847.32; Fri, 25 Apr
2014 12:30:44 -0400
Received: from xchngsvr.a.com (xxx.xxx.xxx.xxx) by Xchngsvr.a.com
(xxx.xxx.xxx.xxx) with Microsoft SMTP Server id 15.0.847.32 via Frontend
Transport; Fri, 25 Apr 2014 12:30:37 -0400
Received: from mia0vm-cass03.colo.sonicwall.com ([208.17.117.5])
by
xchngsvr.a.com (SonicWALL 7.4.5.1391)
with ESMTP id 201404251630370000228;
Fri, 25 Apr 2014 12:30:38 -0400
Received: from mail1.fieldsolutions.com ([98.129.95.107])
by
mia0vm-cass03.colo.sonicwall.com (SonicWALL 7.4.4.8439)
with ESMTP id
201404251631070343409; Fri, 25 Apr 2014 09:31:07 -0700
Received: from localhost (localhost [127.0.0.1]) by mail1.fieldsolutions.com
(Postfix) with ESMTP id F32731031781
for <[email protected]>; Fri, 25 Apr 2014
11:31:06 -0500 (CDT)
MIME-Version: 1.0
To: <[email protected]>
From: Field Solutions <[email protected]>
Subject: WIN#: 649890 NEW Signage - Reply-To: <[email protected]>
Content-Type: multipart/alternative;
boundary="=_747eac72d0ea92652b25d7d469d7165b"
Message-ID: <[email protected]>
Date: Fri, 25 Apr 2014 11:31:06 -0500
X-Mlf-KeyWords: preapproved,dollars$$$,pay,toner,expectations,fl,dollars,guarantee,voltage,confi
X-Mlf-Language-Detected: NoLanguageFilter_English
X-Mlf-Connecting-IP: 50.244.134.141
X-Mlf-Country-Code: US
X-Mlf-Rules: rn;7.24
X-Mlf-Rules-Pos-Features: WORD_voltage_2.97;WORD_configuration_2.51;WORD_inputs_2.50;WORD_documentation_2.
X-Mlf-Rules-Neg-Features: WORD_preapproved_-1.85;SUBJ_dollars$$$_-1.74;SUBJ_pay_-1.56;WORD_toner_-1.53;WOR
X-Mlf-Sliderbars: N4,B4,S4,L4,Q4,G4,A4,I4
X-Mlf-Version: 7.4.4.8439
X-Mlf-Threat-History: nothreat
X-Mlf-Threat-Detailed-History: nothreat;none;none;none
X-Mlf-UniqueId-History: i201404251631070343409
X-Mlf-Connecting-IP: 208.17.117.5
X-Mlf-Country-Code: --
X-Mlf-Threat: nothreat
X-Mlf-Threat-Detailed: nothreat;none;none;cloud-nj
X-Mlf-UniqueId: i201404251630370000228
Return-Path: [email protected]
X-MS-Exchange-Organization-Network-Message-Id: 5ea15b9c-561d-4a2a-d03e-08d12ebad75d
X-MS-Exchange-Organization-AVStamp-Enterprise: 1.0
X-MS-Exchange-Organization-AuthSource: Xchngsvr.a.com
X-MS-Exchange-Organization-AuthAs: Anonymous
There is only one Exchange server in the Organization

Exchange Server 2013 Client Mail are Return.Error is [0x80040305-0x0004de-0x00054a]

Hi,
We are using Exchange Server 2013.we have Outlook 2007 SP3 and 2010 SP2 client .Some clients inform mails are return.
Return massage
"This message could not be sent. Try sending the message again later, or contact your network administrator. Your server administrator has limited the number of items you can open simultaneously.
Try closing messages you have opened or removing attachments and images from unsent messages you are composing. Error is [0x80040305-0x0004de-0x00054a]"
Thanks,
Gayan

1) Disable TCPChimney and RSS on CAS and Mailbox Servers by running below commands
netsh int tcp set global chimney=disabled
netsh int tcp set global rss=disabled
2) Disable unwanted Add-Ins in outlook that may open many sessions
3) If above steps doesnt resolve, you can delete existing outlook profile and create new Outlook online profile

How do I get the Windows 8.1 Mail/Calendar/People apps to connect to my company's Exchange server?

I have a Surface Pro 2 on my organization's domain, and while I have Outlook 2013 running fine on the desktop side, I'd really like to connect the Mail, Calendar, and People apps to my work Exchange account if possible.
First, a little background on my company's Exchange configuration, which is "extra secure" variety. Obviously, I'm using generic placeholders here. My email address is
[email protected], but our actual Exchange server is exchange.internaldomain.com, and my actual username is lasfir (first 3 of last name, first 3 of first name). I'm not 100% clear on our certificate process,
but from what I understand from talking with our Systems team, it's a self-signed certificate.
Anyway, when I try to add my account, I get the usual email address and password prompts. I enter
[email protected] and my password, which don't resolve. The app returns "we couldn't find settings for
[email protected] Provide us with more info and we'll try connecting again."
So I add the internaldomain as the domain and lasfir as my username and click Connect again. This time it returns "we still couldn't find settings for
[email protected] Providing this additional info may help. If you don't know this information, search online or check with your provider."
So I enter exchange.internaldomain.com as my server address and click Connect again. This time it returns "to connect to this account, you need a valid certificate on this PC. Contact your system administrator for more info." That tells me at least
it's finding my Exchange server, but I have no idea about the certificate thing. I reached out to our Exchange admin and our Systems guys, and they just weren't sure about the certificate process.
As one of the few people in my organization running Windows 8x, I'm a bit of a guinea pig for stuff like this. Any advice how to get this working?
- Greg

It doesn't sound like the Exchange environment is configured in a manner to support these types of clients very well. Have your Exchange team look at the following
http://blogs.technet.com/b/exchange/archive/2012/11/26/supporting-windows-8-mail-in-your-organization.aspx
http://blogs.technet.com/b/exchange/archive/2013/10/18/supporting-windows-mail-8-1-in-your-organization.aspx
From the latter article: "Communications applications can connect to a corporate Exchange service
configured to require certificate-based authentication. User authentication certificates can be provisioned to Windows 8.1 devices by administrators or end-users can browse to certificate and install to user certificate storage."
You might want to:
Ask your Exchange team the public URLs (ExternalURL) for Exchange OWA & ActiveSync
Open the OWA URL in your Internet Explorer from your Surface
If you get a Certificate warning, open the certificate and select Install (NOTE: You may have to install the entire certificate chain). Your desktop support team should be able to support this because it is the SAME process for standard Windows 8x
desktops.
Confirm that you can open OWA on your surface with no more certificate or security warnings. NOTE: The Exchange team will have to configured OWA properly.
Once confirmed, repeat the same steps for the activesync URL that they provided.
When done, try using the OWA OR ActiveSync URL value in your settings of your Mail client.
Good Luck

Exchange Server 2013 Edge Transport Role

Dear,
I have a question regarding Exchange Server 2013 SP1 that, I have installed Edge Transport Server Role on separate box without Domain Joined. Obviously I installed Exchange CAS and Mailbox on Same box with
Domain Joined in Corporate LAN.. But my edge is placed on DMZ and it is ready with all configuration, Mailbox Server Synchronization is also installed with Edge. Means all required configuration are properly configured and it is verified. But I want clients
to OWA Access from Edge only. Because I want to restrict my internal network from the internet. So kindly provide me any possible ways to access OWA from Edge only ??. I have see some another methods like "Web Application Proxy instead of TMG because
TMG is expired"..
Kindly provide me possible ways or URL so I will configure it..
Thanks.
Fuzail (FM)

Hi,
Is there any further question on this thread?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange server 2013 supported mailbox databases and public folder databases

I want to know about Exchange server 2013 SP1 Standard and Enterprise version support how many Mailbox databases and Public folder Databases? Total Mailbox and Public folder databases supported information.
I Know as below but not clear:
1) Exchange server 2013 SP1 Sandard edition support 5 Databases, It's include Public folder databases, total=5 or 5 mailbox databases+5 public folder databases=10 databases
2) Exchange server 2013 SP1 Enterprise edition support 100 Databases, It's include Public folder databases, total=100 or 100 mailbox databases+100 public folder databases=200 databases
kindly let me know. Thanks.
Babu

Hi Babu,
Please check this link too.
http://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspxhttp://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspx
Thanks & Regards S.Nithyanandham

Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1

Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1
When I manual start MSExchangepop3 Service on CAS It show "The Microsoft Exchange POP3 Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
In event log show POP3 EventID 1018 , 1019 , 1036
It said like this blinding already use (0.0.0.0)
The point is "IF I SET BINDING FOR 995 , MSEXCHANGE POP3 Service will automatic stop"
Does anyone face this issue please?
Thank you

You could check what (if anything) else is running on that port.
From a command prompt, type netstat -ano | find 995
This will give you the Process Identifier (PID) for the process that is running on port 995. Then you can open Task Manager, add PID as an additional column, and find out what that process is.
Hope that helps.

Folders Exist After Installing Exchange Server 2013

Hi,
We installed Exchange Server 2013 SP1 a while ago and noticed two directories were created:
D:\MonitoringDiagnosticLogs\MSExchangeHMHost (Contains a file called MSExchangeHMHost20141231-1)
and
D:\TransportRoles\Logs\SyncHealth\Hub
I also noticed the second folder is addressed in Cumulative Update 5.
I have the following questions:
1. Does applying CU5 remove the second directory? If not, is it safe for me to delete this directory?
2. What about the first directory? How do I get rid of that? Is it safe for me to delete it?
3. If I cannot get rid of the two directories is it safe for me to create a new partition, move the directories to it, and mark it as D:\ so the path remains the same?
Thanks for the help!

Hi,
Based on my research, the two additional directories are created on this D:\ drive during installation of Exchange 2013 automatically:
D:\MonitoringDiagnosticLogs\MSExchangeHMHost
D:\TransportRoles\Logs\SyncHealth
Currently, there is no official document about this issue. Since it will not cause any issue, you can leave it there.
We will wait for the official explanation of the issue. We highly appreciate your kindly understanding and patience.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Cannot Access EAC/ECP on exchange server 2013 after installation

Hi,
I can not Cannot Access EAC/ECP on exchange server 2013 after installation . Error 404.4 code 0x80070002
Help!
Thanks,

Hi Florin
Did you try accessing EAC by using below link
https://<Exchange_2013_CAS_FQDN>/ecp?ExchClientVer=15
Please access EAC via Internal URL: https://<CASServerName>/ecp
Finally ensure that you have logged in as administrator as well as this might be problem as well
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Mail Delivery betweek Exchange Server 2013 co-existance with Exchange server 2010

Hello Guys
I have a mailflow issue, hoping someone can help with detail description, below is the setup
Exchange server 2010 SP3 with all roles in one server
Exchange server 2013 SP1 with CU6 with all roles in one server - this server is in a different subnet to the 2010 server. I am able to see exchange 2010 databases and mailboxes from Exchange 2013. For testing purposes, I have moved 3 mailbox from 2010
to 2013. These 3 mailbox, is able to send and receive email from Internet but to each other via OWA or Outlook. These 3 mailbox also not able to send to receive email from any mailbox that is still in 2010 server via OWA or Outlook. I am not planning the whole
server cutover in a go and planning to do state by stage mailbox migration so I need mailflow working properly. When I send an email from one of the migrated mailbox that is in 2013 server, I can see that the email leaves the mailbox outbox and sits in the
queue ..
Can someone please provide detailed solution what needs to be configured?
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Mails struck in Drafts folder after Transport Agent installed in Exchange Server 2013

Similar Messages

Maybe you are looking for