Main Steps Interface SAP CAD

Hi all!
I'm starting a new project that requires the use of the interface for the CAD Applications. I'm fresh in this area sadly... could anyone be so kind of giving the main steps of this process? I am only allowed to use standards. The sap in use is 4.6c
thx a lot
regards

Hi Luis,
some applications like PLM allow you to use
SAP ECL Viewer to integrate CAD
http://www.sapinfo.net/index.php4?ACTION=noframe&url=http://www.sapinfo.net/public/en/article.php4/Article-2117242d237caf1309/en
Carry out the following steps in order to download the new ECL Viewer 4.0.3 from the SAP Service Marketplace:
1. Goto http://service.sap.com/plm
2. Switch to Life Cycle Data Management → Integration → Visualization of Product Knowledge → Media Center.
3. Download the ECLViewer zip file to your local hard drive (right mouse click on document download icon).
4. Open the zip file and run the Setup.exe file. Ensure that all other applications are closed before starting the application. "
from
http://help.sap.com/bestpractices/BBLibrary/documentation/E00_BB_Quick_Guide_EN_DE.doc
Regards,
michal

Similar Messages

  • Interface SAP CAD

    Hi all!
    I'm starting a new project that requires the use of the interface for the CAD Applications. I'm fresh in this area sadly... could anyone be so kind of giving the main steps of this process? I am only allowed to use standards. The sap in use is 4.6c
    thx a lot
    regards

    Hi Karsten,
    first of all, thanks for your anwser. I have another questions, if you don't mind
    -briefly, how does the comunication between SAP and CAD works. by file, RFC?
    -Does the CAD interface of SAP supports all CAD applications? if not,
    what are the most common ones? Have to say that the CAD Application to
    work on, has not yet been chosen
    thx a lot for your time
    Kind regards, Luis

  • Data transfer b/w SAP to Java using IDOC and Interface SAP Jco

    Dear Experts,
    The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
    For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
    In this case we are having some doubts.
    1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
    2. We are planning to install "SAP Jco" in Java server. Is this correct...??
    3. Other than SAP Jco any other softwares needs to be installed or not..??
    4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
    5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
    If anybody has detailed steps or explanation please share it with us.
    Thanks in advance
    Warm Regards,
    VEL

    Hi All,
      For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
    When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
    Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
    Regards,
    Velmurugan P

  • What are the main steps to be taken care while doing recording for LSMW

    Hi,
    I am facing problem in LSMW.
    Can anybody suggest me that What are the main steps to be taken care while doing recording for LSMW for recording mm01 ?
    thanks'
    naresh

    Hi,
    Recording in LSMW is similar as SHDB.
    in LSMW after you give Project-Subproject and Object.
    1)Go to-> Maintain Object Attributes -> double click
    2)Press Display/Change Button at top left to make editable mode.
    3)Select radiobuton -> Batch Input -> Give Recording name say Z_mm01
    4) Click the Recording Overview boton on right -> Give TCode which u want to record....
    Rest refer the Document link attached.
    Please find the links to various threads on the same.
    Re: LSMW - Using a BAPI
    BAPI, IDOC in LSMW
    Upload the data in LSMW using BAPI
    This one is the most complete document for the same
    http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
    http://service.sap.com/lsmw.
    Regards
    Kiran

  • Interface with CAD Software

    Hi Experts,
    Could you plz tell me,
    1) Is there any possibility to Interface with CAD Software ? How ?
    It is too urgent. Plz help me.
    Note : Rewarding high points for helpful answer.
    Thanks & regards
    Murali

    Hi,
    Check this links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d03a090-0201-0010-0597-f87213b26d53
    SAPGUI Failed error while accessing CAD Desktop from UnigraphicsApplication
    CIC and CAD (CTI Integration)

  • Help required in the last step of SAP Query

    Hi Experts,
    I have walked through all the steps of SAP Query except for the last one.Please tell what to do in the attached screen shot of SAP Query.
    Thanks and regards
    Rajeev Chhabra

    Hi Vinod
    My problem is that
    1.I am not getting the screen Basic List Line structure in the Tcode SQ01 can you tell me how to get that.
    2. In the last step of the SQ01 transaction code Can you please tell what to do on the screen Query layout design(Please give adetailed response)
    Thanks and regards
    Rajeev Chhabra
    Message was edited by: rajeev chhabra

  • Rejection of WBS settlement step in SAP PS

    Dear Experts,
    I have on e new requirement to ignore WBS settlement step from SAP PS flow.
    Current scenarion ;-
    WBS --> Network --> Activity --> Material Po -->Budgeting --> Release budget -->PO creation --> GRN --> GI --> MIRO -->AS01   --> CJIC --> Settlement CJ88 --> Activity Confirm --> WBS Techo --> WBS Closed.
    Require Scenarion :-
    WBS --> Network --> Activity --> Material Po -->Budgeting --> Release budget -->PO creation --> AS01 --> GRN --> GI --> MIRO ->Activity Confirm --> WBS Techo --> WBS Closed.
    At the time of GRN only item should be cpitalised.
    can anybody explain is it possible? if not then why?
    Please explain impact on PS module.
    Please do needful.
    Thanks & Regars,
    Arvind Tirlotkar.

    Hi,
    I think you are talking about direct capital item procurement.
    you can make statistical project for that; then the wbs will only be used for budget check and you don't have to settle also.
    at the time of pr/po creation you can have wbs element field and asset field in account assignment tab (get with the help of MM consultant); all cost will got o asset and budget will be checked against wbse.
    Regards,
    Harsh.

  • Regarding Number of MAIN Windows in SAP Script.

    Hi,
    SAP Script allows to place a maximum of 99 MAIN Windows. Is it possible to have different content in different MAIN Windows i.e., if i have 2 MAIN Windows in SAP Script with numbers 00 and 01 can i have different contents in these two windows. If possible please give us an example for the same.
    Thanks in advance for your esteemed help.
    Regards,
    Raghavendra Goutham.

    HI All,
    Thanks for your esteemed replies.
    But i want to frame my question exactly.
    In my script there are two main windows with number
    MAIN 00 and MAIN 01.
    MAIN 00
    Content:
    /E  data
      abc,,def
    In MAIN 01 i want to have only XYZ, some thing like this
    MAIN 01
    /E total
    XYZ
    My problem is: whenever i am changing the content in MAIN 01, the content in MAIN 00 is also getting changed.
    I do not want this to change, i want different content in both of them. Is this possibel if so how.
    Thanks and Regards,
    Raghavendra Goutham.
    MAIN 01

  • Explain withholding tax partial pament configuration steps in sap

    Hi,
    This ramu .explain withholding tax partial pament configuration steps in sap .

    Hi,
         Please follow the steps for tds-partial payments
    In the following activities you make the settings for withholding tax. (SPRO-F.AC(NEW)-F.AC.GLBSETTINGS-WITHHOLDINGTAX-EXTENDED WITHOLDING TAX.
    The SAP R/3 System provides you with two procedures for processing withholding tax:
    "Standard" and extended withholding tax.
    "Standard" withholding tax is the procedure that has always been supported by the system. It offers you the following features:
    Withholding tax for accounts payable
    Withholding tax calculation during payment
    Withholding tax code per vendor line item
    Extended withholding tax provides the following additional features:
    Multiple withholding taxes per customer or vendor line item
    Withholding tax calculation for partial payments
    Enhancements in withholding tax calculation
    Withholding tax calculation during invoice entry and during payment
    Regards
    Sridharshetty

  • Main Window in SAP Script

    Hi Guys,
    I wanted to know as to why is it possible to create multiple main window in SAP Script.
          In most theory it is written a SAP Script can only use 1 main window, If thats the case why is it still possible to create more than 1 of them.
          Can you explain its use and functionality.
    Helpful answers will be duly rewarded.

    Hi,
    U can have multiple main windows in Sapscripts(Upto 99)
    Main Windows (MAIN)
    Each form must have one window of type MAIN. Such a window is called the main window of the form. For SAPscript forms, the main window has a central meaning:-
    ? It controls the page break.
    ? It contains the text body that may cover several pages.
    ? It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
    As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the form. The SAPscript composer thus avoids reformatting of the text after each page break.
    If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
    For printing header lines or totals, the different output areas of the main window are of special importance.
    The diffetent Output areas of main window are
                                                                      TOP
                                                                      BODY
                                                                      BOTTOM
    its use and functionality.*
    Suppose you have requirement that you r displaying data from two line item tables which can flow multiple pages.
    In this case u have to use multiple mail windows.
    Regards
    Sandipan

  • Add query to Main menu in SAP 2007

    Hi all!
    Can i add query to main menu in SAP 2007. Now, i only add done query to My menu.
    Thank you!

    Hi Tien,
    You cannot add the Query to the main menu.you can try the other way round. Paste the query in the crystal report and then check the report is comming OK. Then add it to the main menu via crystal Reports.
    Regards,
    Raj

  • Post installation Steps of SAP EP

    Hi All,
    What is the Post installation Steps of SAP EP...
    Thanks,
    ARIFF SHAIK

    Hi
    Follow the https://service.sap.com/instguides.
    Then open "Installation & Upgrade Guides - SAP NetWeaver 7.0 - Installation"
    In the section "Planning" you will find the Master Guide.
    Read the Master Guide to determine the installable units, the SAP systems required for your IT scenario, and the installation sequence. MG will drive you to the relevant Install guide which help you to fulfill all the pre- and post-installation steps as well the installation itself.
    P.S.
    Usually "Running an Enterprise Portal" scenario requires at least EP, EPC and AS JAVA usage types to be installed
    Please look this[SAP NetWeaver Process Integration 7.1 Post-Installation Steps|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e]
    Hope this helps!!
    Regards
    Vijay

  • Open to Buy configuration steps in SAP IS Retail

    Hi Guru's,
    Let me know about open to buy configuration steps in SAP IS Retail.
    Thanks in advance.
    Regards,
    SP

    Hello All,
    Delete the plant / Site complete details and put in one transport and do the import & export.
    Thanks.
    Edited by: krishna cherry on Jul 26, 2010 3:28 PM

  • Hide the Button Next / Previous in Main Steps on GAF.

    Hello Friends,
    I have to develop one application using GAF.
    In this applicaion there is no INITIAL Screen.
    application directly start with Main Step but Application doesn't have Button Next and Previous like standard GAF application.?
    How to Hide the Button Next / Previous and change the name of Button?

    Hello Julia,
    You are absolutely correct.
    But the thing is, first screen of my application only have the button 'Start' and also roadmap is displayed.
    But in standard GAF application,
    if i configured my window as Inital Screen then button Start will come, but raod map will not come.
    if i configured my window as Main Step then Road Map will come with Button 'Previous; and 'Next'. but Button Start will not come.
    either I can add the Button 'Start' in Main Step or change the name of Button 'Next' to 'Start'.
    But button 'Previous' nothing make sense, so i have to hide this button.
    my 'Start' button will act as Button 'Next'.
    but how can i hide the button 'Previous' and change the name of button 'Next'.
    could you please suggest me shall i develop this application using GAF or simply use the Roadmap UI element in my web dynpro abap application?
    Thanks
    Edited by: Chandraprakash Sulakhe on Apr 6, 2009 11:34 AM
    Edited by: Chandraprakash Sulakhe on Apr 6, 2009 11:42 AM

  • Change text label 'Next' in GAF main step

    Hi Guys,
    I have seen some example in the package APB_FPM_DEMO have already done this.
    But it seems I am unable to change the button 'Next' attributes , how to change the text of predefiend button 'Next' ?
    best regards,
    Vincent

    Hi Vincent,
    On the last main step (e.g. activation step, review step or step before confirmation) the Next button can be labeled with suitable own text, indicating a final action leading to the confirmation step.
    Best regards,
      Andreas

Maybe you are looking for