Maintainance of values for budget & Available-to-Reserve

Hi Everybody,
I want to create budget posting in MDF (Market development fund). Under the line item --> For fund ID, I must enter the budget & Available-to-Reserve values manually. But, I'm unable to do this. Please let me know where I must maintain the values for budget & Available-to-Reserve, so that it will be displayed here in MDF posting.
Thanks in advance.
Archana.

XX_ONT_ATR_QTY is a custom package, so you need to review the code you have 11i and make sure it is working in R12.
eTRM
http://etrm.oracle.com
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
Thanks,
Hussein

Similar Messages

Maintaining two values for upper & lower specification for a MIC

Hi gurus,
My client requirement is that they want to maintain two values for upper specification and lower specification for a quantitative characteristic.
For eg. Master inspection characteristic is carbon %
& for this characteristic they want to maintain values as follows
lower specification:0.00 upper specification:0.32
lower specification:0.37 upper specification:0.60
The requirement is that both these limits should be maintained for the same MIC and system should not allow values between 0.32-0.37
Is this possible in standard scenario.If possible pls. provide me the solution.
Thanks in advance.

No, not possible in standard SAP. A test can only have one set of limts.
What you describe sounds more like specs anyway rather then test limits.
Your client isn't maintaining specs for materials in MIC's are they? This would be the least desirable method and not really the way SAP designed it to be.
Craig

Exempted cost element not working for budget availability control

Hi,
I have configure the exempted cost element in our sandbox client. In the SAP IMG menu Project System -> Costs ->Budget-> Specify exempted cost element I maintain the following entry.
COAr cost element Origin Group
0200 433010 *
Then in the material master of a material I maintain the origin group in costing 1 view as 001. Then I do a material issue against the network of a WBS in MB1A tr code mvt type 281 and post the cost to the cost element 433010. As per the exempted cost element logic this should not affect the budget availability since the cost element 433010 is define as an exempted cost element. But the system shows actual incurrence for this transaction and reduce that must amount from the budget. I check this is the S_ALR_87013558 report. To re-ensure I do the Project Info database rebuilt in CJEN tr code then activate the availability control in CJBN but this is of no use. The S_ALR_87013558 still shows the budget available as total budget minus the cost incurred in the cost element 433010 in the above transaction.
Please let me know if anybody has configured the exempted cost element in their client and have resolve this issue.
Thanks and regards'
Preetam

Hi,
This is a std SAP Functionality and system should exempt the costs for the cost element maintained in the Configuration for that Controlling Area.
Muzamil

Maintaining different values for Accounting Type (KOART)

Hi experts,
I have several accounting tcodes such as FBV0, FB03, FB08, FV65,FV60 in one parent role.
FV60, FV65 are added to this role as FBV0 is checking internally for this authorization object.
All these tcodes share a same object F_BKPF_KOA which differ by activity and the accounting type (KOART).
The KOART field is an org level field defined by SAP and I have entered D,K,S as values.
But the auth object values should be different for the accounting types.
i.e 03 for D,K,S
01,02,03,77 for S
03,77 for K
All the derived/child roles for this parent should also have the same document type as the parent. How can I achieve this as this object is maintained at the org level.
I could not delete this obj from being an org level element as it is defined by SAP.
Appreciate your response.
Thanks
Kee

> If KOART is an org field you cannot differentiate between authorized activities for each of the KOART values in one role. Whether you maintain values in the parent or not only matters if you're planning to assign the parent roles to users or if you just use them as templates.
>
Parent Roles should not be assigned to any users. It should only be used as Template to grant and control Non-Organization Level authorizations centrally (you can see these option in Parent roles). Concept of Parent-Child role is to avoid creating same roles where all authorization field values are exactly same and differs only for Organization Values (different Site / Branch Office specific constants). So we can maintain the Org. levels as different sets for a single Parent role as I already explained.
For more details: Note#314513 - PFCG: Maintaining individual organizational levels
Note#532695 - PFCG: Incorrect organizational level values in derived roles
>
> Please elaborate on this one. I think we're running into an urban myth here....
>
> Organizational levels are only instruments to assist in building roles. For the final profile it does not matter whether a field is organizational or not. It will not influence the behaviour of the authority-check.
For the final profile it matters during loading of User authorization data to User Buffer. Think about the Parameter values stored for a particular user. How it behaves for all Objects containing a particular Auth. Field and providing default assignment for that user whenever he tries to perform any action where this field is required to populate.
If we delete any Object from SU24 proposal then it doesn't mean that the check will not be carried out or the Org. Field contained in that object will not be populated with it's values. I tried to make this clear to the requester.
Regards,
Dipanjan
Edited by: Dipanjan Sanpui on Jun 8, 2009 7:49 AM

How to maintain default values for custom table fields -- Urgent

Hi all,
I've a requirement wherein i need to create a Z table (with maintainence view) in which i'll have date and time as two of its field which should have current date and current time as default value. Can somebody suggest as how am i to maintain the date and time fields defaulting to current date and current time.
Incase if someone is unable to intrepret what i'm trying to say, please query me, i'll elaborate it further.
Please give in your quick inputs which is highly valuable to me and also will be highly appreciated.
Thanks in advance,
Vaishnavi Varadarajan

We have a following custom table which contains the fields Date on which record was created and Name of the person who created the object. We would like to have these to be filled up with SY-DATUM and SY-UNAME respectively.
Using the events, we can achieve this.
Please refer the following link:
http://abapliveinfo.blogspot.com/2007/12/events-in-table-maintenance-in-sap.html
Also,
Write a form routine in table maintanance generator.
1. SE11 > utilities > table maintenance generator
2. environment > modification > event
define the event and form routine to make use of the tigger. in the form routine define an object for the class and call the relevant method.
Or u can do it as:
Table maintenance generator is basically used to do table operations like (insert, delete, modify...).
if you create table maintenance for your table it will build a module pool program, by using you do the above operations.
below is the procedure to create table maintenance generator.
1) Create one function group.
2) after activating your Ztable, choose 'Utilities'----> 'Table maintenance genrator'.
3) then give the authorization group and function group created abobe in the next screen.
4) Then choose the "create" button in your application tool bar, which will creates the module pool program.
5) then create one Tcode by chosing "Transaction with parameters( parameter transaction)".
6) in transaction field give "SM30", select the check box "Skip initial screen".
7) in the below of that screen you can find the "Default values" frame.
8) there under the "name of screen field" select the "View name' and 'update".
9) in value column against to "view name" give you table name, and against to "Update" put 'X' in capital letters.
save it then you can straight away use this newly created Tcode to maintain your table.
Note:- 1) make the modification while saving the data into your table using this newly generated program to carry out your validation (even though it looks like standard program; no need to enter the access key).
2) if you do any changes to your table and press the activate button automatically the table maintenace generator will be goes off, you need to create this again.
cheers,

Can we maintain two values for one material a plant without split valuation

Hello Guru's,
We have a situation, we use MOVING AVERAGE PRICE in accounting view 1. Without split valuation.
The actual issue is, we receive, damaged material from a customer with a "0" value, and we send the material as it is, to a vendor with a "0" value.
The vendor, sends us back the repaired material with a value, say "10" (and this keeps changing).
Is it possible, to have Non Valuated Stock and Valuated Stock within the same Plant, for Material "A".
And it shouldn't affect the MAP. Also, we don't want to have Split Valuation.
Please help.
Kashi

if i am getting your scenrio correctly then i will suggets u to maintian the material master with moving avreage price control indicator then
case1> gr from customer at o rs
use the tcode mb1c and movement type 511
as it is evaluated at MAP hence only material document genrated no accounting document
well tried to realize your scenerio but it is not possible to do that
as MAP is going to get effected as a result of valuated good recipet
u need to go for separate material code then transfer good from non valuated to valuated one using tcode mb1b and movement type 309 or use split valuation

Maintain value for condition type

Hi All
How can i maintain fix value for any condition type so that while creating PO it will automatically picked in PO.
e.g I want to maintain CVD as 16%
usefull ans will be rewarded
rajesh

Hi,
You maintain the condition record for CVD in FV11 for combination of Tax code etc
Make sure you maintain "Changes to be allowed" manual entries as C auto entry
has priority in customizing OBQ1
The condittion value will flow auto
BR
Diwakar
reward if helpful

Maintain diffrent prices for same material

How to maintain different prices for same material (assume that the price of the the material is varying frequently that to with high margin)
But my req is need to maintain N values for same material .Is it possible??
For ex,
3 Jul Purchasing 20 Pc with 20 INR
5 Jul Purchasing 10 Pc with 10 InR
7 jul Purchasing 20 pc with 2 Inr .... like that price is changing freq. But i dont want to use MAP .Whatever price i purchased will be used for cost calculation.Any suggestion??
Message was edited by:
velmurugan s

Hi,
If your Purchase price changes frequently and you want your MAP or STD price to match the purchase price then you will have to write a simple ABAP that will read the last price paid for each item and automatically post an MR21 to change the MAP or STD price to that price.
I have seen this used in other implementations and it is the only real way to get the MAP or STD price to relate to the last price paid.
I would question why you need to do this though as the two "prices" are designed to be different and there is no accounting reason why they should always be hkept in line.
Steve B

Multiple values for a given property in a Master Record

I have a requirement to maintain multiple values for a given property of a master data as shown in the above example. Appreciate your help on the above.
Regards
SAP BOSS

Hi,
As you said
How do I use the property values in my input values.
I thought you are talking about input form, that's why I said you can crate input form using dimension over ride.
But if your requirement is about scrip logic then it is better to ask question with reference to following guide by Vadim Kalinin so that we can understand your requirement properly and you will get right solution.
http://scn.sap.com/community/epm/planning-and-consolidation-for-netweaver/blog/2014/01/31/how-to-ask-questions-about-script-logic-issues
Regards,
Shrikant

How can I see planned values for services in PS reports?

Hi experts.
We are implementing PS for a mining company; in our process, project designers plan materials and services in networks and then get planned values for budget requests.
The problem I am facing is that I cannot see the planned values from services in the plan values reports. No value is exhibited for version 0 if I plan only services in a network. For materials planning I can visualize planned values normally. The network is not released. On example of planning values report that I am using is s_alr_87013533.
Does anyone know how to correct this problem with PS configuration?
Any help is welcome. Thanks!
Rafael

for planning services I am assuming that you are using service activity
check if determine plan cost is set up in the network header
secondly make sure that the plan costing variant is set up with the valuation variant to define where to get the plan values from

Default value for period indicator in MM01

Hello Gurus,
I have created a transaction for maintaining default value for period indicator in MM01 transaction. User has to maintain the period indicator for Material Type(MTART) and Plant(WERKS) before creating a material master. If it is not maintained, then error message will be generated saying that 'Maintain Period indicator for the Plant and Material Type'.
I have created an implementation for that in 'Y_BADI_MATERIAL_REF'. For Material type 'FERT' it is working fine.
But when i try to create a material of type 'RAW1' , im getting a error that 'Mandatory field Profit center is missing' which is already entered in the material master and is not in the part of forecast view i have created.
During my second testing, i got a different error MRP group 'Y0Y3' is not valid, though i entered it using F4 help.
When i commented my piece of code in the implementation, error disappeared..
Im very new to MM, please help me out gurus..
Thanks in advance.

Thanks for your reply.
I know that it can be made as optional entry in OMS9 transaction. But when i deactivated my BADI, that error disappeared.
Is there any relation between the period indicator and profit centre ?
And also while creating a material, when i select the MRP group from the dropdown list(F4), whatever the group i select, im getting an error 'MRP group does not exists'. But when i deactivated my BADI, it disappeared.
Im really confused why am I getting such errors because of this BADI.
Please help me out...

Max.value for a sales order

Hi Gurus,
A min.order value can be maintained in Sales order by the condition type AMIW but can any one tell how to maintain max.value for a sales order???
Awaiting your early answers..........
Sunanda.P

hi
in OVA8, there maintain the maximum document value as required.
If not then you need to take help of ABAPer
With the help of ABAper you need to prepare a logic for this maximum order value.
Then Go to sales order user exit userexit_save_document_prepare there u insert logic with the help of abaper.
Based on logic created by ABAPer, while saving the sales order it will check this logic and throw out the error if it exceeds max value
Regards
Edited by: WISH on Aug 4, 2008 6:19 AM

Budget Availability control and Assigned Value in Project

Hi,
Project is so structured that it is similar to the product structure. Assume a simple case with two level BOM where a sub assembly M1 includes another sub assembly M2.
In project, these two sub assemblies are assigned under two different WBS elements W1 and W2 respectively where hierarchically W1 is assigned under W2.
After release we have two Production Order P1 and P2 account assigned to W1 and W2 respectively.
Assume M2 stnd price is 100 and M1 stnd Price is 150.
My process output ultimately is only M1 so I would prefer to give a Budget of 150 Rs. However, since P1 and P2 production Orders are accoun assigned, a total 100+150 =250 Rs is showing up under assigned value and error of Budget over run is being encountered.
One solution can be to give budget of 250 Rs, which not logical as I am producing only M1.
We tried by un flagging Additional and Assign funds in plan indicators for Order category 20 and 10 in OPSV. But that did not help.
Once P2 prod order is confirmed, the assigned value for W2 is becoming to actual cost of P2 and remains even after setting TECO and Settling P2. It becomes Zero only when W2 is removed from acct assignment of P2, which again can not be a solution as WBS and Prod Order will loose the linkage.
We desire avaialbility control to verify only against the actual cost Project. No assigned value should be considered.
Need your help to resolve it.
Thanks
Saikishore ganga.

Hi Sudhir,
Thanks for the valuable input.
As you rightly said we can not produce M1 without M2. But budget has to be only 150 Rs. Because
Cost M1 = Cost M2 + other mat Cost in assly + Assly operations Cost.
Cost M1 = 100 + 10 (assume) + 40 = 150 Rs.
Physically I am Producing only M1. So my budget would be atmost the cost of the item that is 150 Rs.
But in project we had to assign M1 and M2 under two diff WBS elements because it takes considerable amount of time to completed entire qnty structure i.e BOM and Routing of M1 and then release. Till them M2 has to wait for M1 BOM and Routing to be completed. In order again time , M1 is assigned under W2 , W2 is released and in MRP W2-M1 BOM explodes and manufacturing begins.
When M1 bom gets ready, it is assigned under W1 and then W1 will be released. Duplication of Prod Orders are taken care.
However, by using exempt cost elements feature I think we can resolve the above.
Will update once I do my experiments on this.
Thanks for the input.
Saikishore. Ganga

Add user-entered "Fill-In" values for "Choice" column to the list of available choices?

I have a "Choice" column in SharePoint where users need to select a name for a specific engagement when uploading a document. Since new engagements come up all the time, they need to be able to enter a new value and have that value available
to select as a Choice from the list the next time they upload a document. Is this possible in SharePoint?
Our organization does not allow custom code using Visual Studio, but I do have access to SharePoint Designer.

Hello!
All available choices are specified in the list's schema. I.e. the "Choice" column is designed to operate with predefined values that are set in the schema. Of course, you can every time add a new choice to the list's schema programmatically, but that's a worst
practice.
In your case I suggest to add a list (kind of dictionary) containing all values available to pick out. Then, instead of "Choice" column, use "Lookup" column which points to the dicitionary-list. Once a new value is entered, add a new list item to the dictionary.
Next time this value will be available to pick out.
.Net Follower (http://dotnetfollower.com)

Maintaining global lists for ComboBox values

I would like to maintain multi-lingual lists of allowable categories to be used
in ComboBox controls. The values for these lists should be stored external to
the application or at some global level to that they can be maintained by someone
who is not necessarily a developer.
When the user chooses a language when the application runs, the arrayCollections
containing the data/value pairs should be loaded with the data in the appropriate
language. These arrayCollections would be then bound as the data providers to
ComboBox controls in the various modules and components of the application.
For example, in an application about cars there could be a ComboBox containing
colors - in English (red, gray, blue, black) in German (rot, grau, blau, schwarz).
There could also be a ComboxBox containing body types: (sedan, coupe, convertible)
or (limosine, coupe, cabriolet).
ComboBoxes using the data could be used anywhere in the application - in modules,
components or whatever.
What would be the best way to approach this from a design perspective? Where should
the lists to be loaded into the control's data provider at run time be stored?
Scott

Resource modules are probably the right answer. They can even do an enumeration of sorts (an Array of Strings, which sounds like it could be a good fit for colors). In any case, if you ensure that your model (e.g., CarBuilderManager, with methods like getColors() and getBodyTypes()) is cleanly separated from your views and the actual comboboxes, you can do your localization work in there. Then, in your view, you can declare comboboxes like
<mx:ComboBox id="colors" dataProvider="{model.getColors()}"/>
and you can easily adapt the localization without changing the view (e.g., if you find ResourceManager is not doing it for you, you can roll your own localization method).

Maintainance of values for budget & Available-to-Reserve

Similar Messages

Maybe you are looking for