Maintenance Cost Overviw Problem.

Dear All ,
I am facing problem in maintenance order cost overview .I have maintained std formula sap008 in work center ; also PM001 as std cost value key.Now my setting in costing is 1 Rs/min.So whenever I  enter the operation time 100 min ( for example) it should give me Rs 100 as the maintenance order cost. But in my case in cost overview screen it is showing double i.e. Rs. 200 as the cost.Whereas when I check the same costing in Report of actual/planned cost comparison it is showing Rs .100 which is correct.
So why in same maintenance order at one place the cost is twice while at other it is single times.
What is the setting to check for it.
Its very Urgent and only one point remains in my configuration. Please help me.
With Best Regards
Pankaj U. Nimkar.

Dear Gurus ;
Mu Problem is not yet solved . I will give u detail analysis what I have done for this maintenance order.
I have assigned 30 equip to particular maintenance plan ; and schedule the maintenance plan ;Now for each equipment one order is created ; The cost of first maintenance order is exactly right whereas  for the other maintenance order the cost shown in cost overview tab is double than actual ; After proper analysis I found that the cost of first maintenance order is flowing to all the maintenance orders . Even though I made the cost of SECOND OR ANY SUBSEQUENT ORDER AFTER FIRST ORDER ZERO; it shows the cost of first maintenance order in cost overview tab ; whereas in report/actual tab in cost overview it is showing very correct result of cost.?
What may the problem ; Am I forget any tick in configuration or what.
Please help me in this regard
Thanks in advance.
Pankaj Nimkar

Similar Messages

  • Plant maintenance Cost centers

    Dear Experts,
    I just want to confirm,,,,If i am not calculating man power, then i will only use maintenance cost center in both equipment master & maintenance work center????????
    plz tell
    rgrds
    DM

    Hi.
    well i am going to use the same cost center according to CO no completication (If anyone knows ne problem plz guide) , but if i am not calculating man power it means i dont need to confirm the order,,,means i will straightway complete > settle > Business complete the order......
    Hope i am rite....
    rgrds
    DM

  • Maintenance Cost Settlement on Profitability Segment

    Hi, Can anyone tell me, that how can we settle our Maintenance Cost from PM to a Profit Center. In my company there is a Cost receiver defined as Profitability Segment and available in Settlement Rule. Can anyone explain, what does it mean. Are we settling out Maintenance Cost to profit Center directly or somewhere else. 

    Abhishek Sharma,
    Yes, you can settle a Profit Segment.
    Have a look at the Settlement Profile assigned to your order type (IMG: Maintain Settlement Profiles).
    PeteA

  • Maintenance Cost Budgeting

    Hello,
    I have created a maintenance Plan. the strategy is BPMWEK. Total of 52 weeks. I have inserted one operation in the task list which is assigned to the maintenance plan with time line of 2 hours.
    When i do the maintenance cost planning using tcode IP31, the system is calculating total hours as 106 instead of 104(52 weeks * 2hours). Why is it so?
    Regards,
    Narendra Bora

    hi
    i think you have scheduled the mainenance plan ,kindly check the number of call objects generated ,and compare the same with the works you have created
    regards
    thyagarajan

  • Maintenance Cost Key Figures in MCI3 and MCI8 Reports

    we are using ECC6 EHP4 version. Maintenance Cost Key Figures in MCI3 and MCI8 Reports are not reflected the cost as given in different value categories in work orders. I have configrured the PMIS "Assign Value Categories to Maintenance Cost Key Figures" and Valuation Cateogies are also rightly configured. is it some bug or am I missing some thing. Please help

    Thanks for your help.
    I checked transaction code OMOS. all infor structure are on monthly update which is fair. however, I rebuilt the info structure through folllowing navigation path and it worked.
    believe ur info structure S070-MCI7 is not getting update correctly , suggest u to run a statistical update via
    Logistics - General + Logistics Information System (LIS) + Logistics Data Warehouse + Data Basis + Tools + Setup of Statistical Data + Application-specific Setup of Statistical Data + Perform Setup - Plant Maintenance ..

  • Can I do plant maintenance cost planning in functional location wise?

    Dear Experts,
    My customer plans to prepare annual plant maintenance cost planning in "functional location" wise.
    Can this be done?
    If yes, what are the steps?
    regards,
    Abraham

    Abraham,
    You could do it indirectly in ECC using a cost centre for each FLoc. You can then plan the costs in the cost centre
    PeteA

  • Check for Maintenance Cost Budgeting

    Dear All,
    From EHP 5, there is one button in Order create/change screen called "Check for Maintenance Cost Budgeting", but couldn't find any documentation regarding it. I want to know total functionality of that button. Can anyone help me regarding this?

    From Solution Browser:
    Functionality Enhancements
    For critical, high-value maintenance orders, it is essential for the planner to check to see if enough budget provision is available for maintaining a technical object. Based on the results, the planner can request approval for the order and the cost controller can approve the work. The budget forecast is retracted from the maintenance cost budget. Actual utilization is calculated based on past orders and work in progress.
    [ECC 6.0 EHP 5 Version for SAP PM|http://erp.fmpmedia.com/Search.aspx]

  • Maintenance Cost Budgeting - BI Content

    Hi
    I have recently implemented that BI Standard Content Maintenance Cost Budgeting system and an wondering who else is using it and what your experience has been.
    Thanks
    Grahame

    Hello Recca,
    The Predefined Data Model, has 3 InfoCube and 1 MultiProvider
    0PM_C01, 0PM_C05, 0PM_C06
    [BW for MCB: Configuration Guide|http://help.sap.com/bp_bblibrary/600/Documentation/X20_BB_ConfigGuide_EN_AU.doc]
    Also see Page 45 & 113 for more details
    [SAP Business Information Warehouse 3.5: Business Intelligence 3.5.2 Add-On|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ed09790-0201-0010-c28e-c639f87d40b9]
    Thanks
    Chandran

  • Plant maintenance costing

    Dear all i was trying to create a report for counter based maintenance plant coasting so i was trying to know from where each field looks to get its data
    and what is the equation it used to calculate the quantity

    Hi Hafez,
    The question is not clear to us.
    pls provide clear view of the following things:
    1. Whether you wish to view cost of counter based maintenance plan or maintenance cost plant wise.?
    2. You wish to view actual cost or planned cost.?
    3. you wish to know tables to create a new report ?
    thanks
    kaushik ghosh

  • Is traversal calls neccessary in VCS maintenance cost?

    Hi all,
    I'm looking at a quote for a VCS control and pondering all the maintenance costs.
    I can understand it for hardware and various software options but do I really need to pay maintenance for the non-traversal call licenses?
    Is that strictly neccessary in order to get support and software upgrades for my units?
    Cheers!
    Jonas

    Yes, you should purchase the maintenance for the complete product (VCS + all the licences).
    Cisco could chose to not support your VCS if it was only partially covered by support and maintenance and didn't include coverage on all the installed licencing.
    The same goes for TMS, and the additonal Device Licence packs - they incur an additional maintenance cost as well, and while you could just take out maintenance on just the base TMS product, if you're not paying for support for the complete product, Cisco could chose not to support it, or charge you for any time spent.
    You'd have to check the fine details of the wording on the actual maintenance contract you sign up on.
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • OWB Maintenance Cost

    Hi,
    We all know licensing cost of OWB is zero as it comes free with oracle DB....
    can anyone help me in calulating the maintenance cost of OWB.....what all needs to be considered.
    Thanks

    Hi
    Not all of OWB is free, see the following for details:
    http://www.oracle.com/technology/products/warehouse/htdocs/licensing.html
    There is a free component - but there are costed options including ODIEE (which was Enterprise ETL), Application Adapters, Data Profiling and Quality, Data Watch and Repair that are paid parts.
    Regarding the real-world comments on maintenance interested to hear.
    Cheers
    David

  • Equipment maintenance cost

    Dear Expert,
                          Please suggest us how can i get the equipment maintenance cost against reservation no. ?
    Regards,
    Akhilesh

    Hi Pushpa,
                      Thanks for support but actually we  know that equipment of material issue cost against reservation no.whenever component & service both are issue in maintenance order.
    Regards,

  • Total Maintenance Cost

    Dear All..,
    What is the best way to capture total maintenance cost (Only material+service cost) in a single PM order.
    - What if budget is mentioned in the order?
    - How should be the settlements happend?
    - Is it possible to capture service cost through budget and material cost just allocate to cost center without affecting the budget?
    Waiting for your valuable inputs..
    Thanks in advance...

    Hello,
    You can  capture total maintenance cost (Only material+service cost) in a single PM order by using the WBS element in oreder.
    In this WBS Element you can maintain Activity for Only material+service cost.
    - What if budget is mentioned in the order?---> You can Control it by WBS release functionality.
    - How should be the settlements happend?-->Settel the  Order Against the WBS
    - Is it possible to capture service cost through budget and material cost just allocate to cost center without affecting the budget--Using this WBS not possible.
    Regrads,
    Rakesh

  • Maintenance cost per production output

    Dear All
    I have to create report based on Maintaince cost per production output
    and this report is company code wise and Fiscal year period wise ,
    now i got two different cubes from where i can get that cost
    1) 0PM_C01 for Maintenance Cost
    2) 0PC_C01 or IC_C03 for Production output in tonnes

    Hi,
    If the selections used for the query are available in both the cubes,ie company code and fiscal year, then just create a multi cube over it containing both maintenance cost and production output. Map it to the correct fields from the cube and create a report with formula to calculate maintenance cost per production using maintenance cost from  0PM_C01 and production output from 0PC_C01 or IC_C03.
    Regards ,
    Shyam.

  • Maintenance Costs

    Dear All,
    I want to calculate maintenance related costs during maintenance processing.
    I have created an activity and maintained Order dependent parameters.
    When i release and maintenance order and check in the Costs tab i am not able to see the Planned costs for my defined activity.
    Could you please tell me where i am lagging.
    Your inputs are highly appreciated.
    Points assured.
    Regards,
    Rashmi

    Hi Rashmi......
    There are three things that needs to be checked.....
    a. For Labor Cost - Please check that the activity type assigned to your work center has been integrated with Secondary cost element or not....this you can ensure with your finance guy who will do this for you in KP26.........
    b.Have you maintain Value Categories & assigned them proper Cost elements......if not this will also throw problems.......
    c. If only planned cost is concerned........check out that in the Customizing settings, the Costing variant maintained by your FICO consultant, in that whether he has assigned planned cost variat or not & whether costing sheet is also there or not.....
    Hope this will help you..........
    Regards....

Maybe you are looking for

  • I just got a new laptop.  How do I install iTunes and set it up so that I can still store my 80 gigs of music on my external hard drive?

    I would also like to set it up so that if I unplug my external hard drive and take my laptop somewhere else, I can still have access to iTunes on said laptop.  I realize that I wouldn't have access to the music that is on my external hd but I can sti

  • SOAP sender adapter issue

    Hi, We are facing a peculiar issue when using SOAP sender adapter.It is a SOAP-XI-ECC scenario. We have created WSDL using propose URL. Edited the address location in WSDL and included QoS=ExactlyOnce. When we are testing from SOAPUI, it is making a

  • Copy Control for F2-RE

    Dear friends: For Sales Returns, we would like to make a copy control from Billing document to Return Order (F2-RE) In standard copy control for billing document - sales document, (F2-RE), item category REN is not available.  Only TAN is available. 

  • Keep place cursor loaded to repeatedly place the same image

    I'm trying to find a way to keep the place cursor loaded with an image that I want to place many times... an image such as a 'New' graphic (internally we call it a 'New ping') for templated catalogue pages. I don't want to constantly have to place or

  • Error while Launching Scenario from IOP UI

    Hi , I am getting below error on launching the scenario from IOP UI. Few days back it was working fine however when I tried to open it today, excel is not launching at all. So I ran Dbmon to check error and this is what I am getting. I uninstalled an