Major Problem - Cannot Mount Filesystem

Hi,
I was experiencing a problem with my gnome configuration, so I asked a friend (who knows a LOT about Arch) suggested removing the .xxx files in my user account, as logging in (using gdm) on my root account worked.
After doing this, I restarted the computer but could no longer access anything. It hangs on 'Mounting local filesystems', I left it for 15mins but nothing happened. It doesn't produce any errors, just hangs.
I tried using the CD, but running arch boot=/dev/hda3 noinitrd rc (whatever the CD suggests using), which has worked for me in the past, doesn't, it still hangs on /dev/hda3.
What can I do? Formatting my computer is not an option, I have important documents on that drive! I tried running the cd, as if to install, but instead of running the /arch/setup, i made a temporary directory and tried mount /dev/hda3 /tmpDir but it did not work, just hung there.
fsck /dev/hda3 (using the setup cd) just returns the version immediately, it does not check anything.
What can I do? Are there tools available for me to check if there is a problem with the drive? Is it my configuration? What! I would not have though removing all .xxx folders would have made a difference. I do not remember what else I was doing, maybe modifying /etc/rc.conf, but I cannot see how anything on the drive is causing problems, as the drive cannot even be mounted.
Please help!!!
Btw, I am using Lilo, and Arch 0.7.2.

I knew that much hehe
I fixed it!
I loaded ubuntu in a live cd, ran:
sudo fsck /dev/hda3
fsck scanned hda3 and said i needed to run something else:
fsck.reiserfs --reconfigure-tree /dev/hda3 or something like that, i do that and it worked!
Thanks for your suggestion Mr. Green

Similar Messages

Having major problem cannot use my arrow to open anything on page only about 2 in down from browser will it work I have installed and uninstalled firefox

arrow does not open anything 2 in. below the toolbar works fine below that I've installed and uninstalled Firefox several times will not work using Firefox11 very hard to access a lot of things especially when ordering online cannot submit any info required

If the inoperable button or link is near the top of the page....
Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*Uninstall Yahoo Toolbar --> http://help.yahoo.com/l/us/yahoo/toolbar/toolbar8/general/general-07.html
*Uninstall Babylon --> http://support.babylon.com/index.php?/Knowledgebase/Article/View/177/0/uninstall-babylon-software
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Major Problem - Cannot access Mac

Due to my own stupidity I had reason to reinstall my OS X 10.3.4 onto my G4. I installed the first disk no problems but when the second one was finished it asked for my password.
I entered it but it would not work, I tried different ways (i.e. caps on etc.) and no joy. I know it is the right password, even the hint confirmed that.
I've no idea why it won't work but I can not access my mac now, is there a way around this or worse case scenario do I have to reset mac and will I loose everything? If yes how do I do this?
Thanks
DC

See if this helps.
http://docs.info.apple.com/article.html?artnum=107120
Good Luck Don

Cannot mount .cdr

Hey all
Have a problem: cannot mount a .cdr image file. I get the message:
"Image isn't recognized"
I'm mounting on a iBook G4 with Leopard.
Any suggestions?
CCKolling

Found out myself -> all the .dmg and .cdr's had been damaged. nothing to do with the computer.
CCKolling

Mounting ZFS filesystems: (1/10)cannot mount directory is not empt(10/10

Hi
in zone:
bash-3.00# reboot
[NOTICE: Zone rebooting]
SunOS Release 5.10 Version Generic_144488-17 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Hostname: dbspfox1
Reading ZFS config: done.
Mounting ZFS filesystems: (1/10)cannot mount '/zonedev/dbspfox1/biblio/P622/dev': directory is not empt(10/10 )
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: exit status 1
Nov 4 10:07:33 svc.startd[12427]: svc:/system/filesystem/local:default: Method "/lib/svc/method/fs-local" fa iled with exit status 95.
Nov 4 10:07:33 svc.startd[12427]: system/filesystem/local:default failed fatally: transitioned to maintenanc e (see 'svcs -xv' for details)
For sure the directory in not empty, but the others too are not empty.
bash-3.00# zfs list
NAME USED AVAIL REFER MOUNTPOINT
zonedev 236G 57.6G 23K /zonedev
zonedev/dbspfox1 236G 57.6G 1.06G /zonedev/dbspfox1
zonedev/dbspfox1/biblio 235G 57.6G 23K /zonedev/dbspfox1/biblio
zonedev/dbspfox1/biblio/P622 235G 57.6G 10.4G /zonedev/dbspfox1/biblio/P622
zonedev/dbspfox1/biblio/P622/31mars 81.3G 57.6G 47.3G /zonedev/dbspfox1/biblio/P622/31mars
zonedev/dbspfox1/biblio/P622/31mars/data 34.0G 57.6G 34.0G /zonedev/dbspfox1/biblio/P622/31mars/data
zonedev/dbspfox1/biblio/P622/dev 89.7G 57.6G 50.1G /zonedev/dbspfox1/biblio/P622/dev
zonedev/dbspfox1/biblio/P622/dev/data 39.6G 57.6G 39.6G /zonedev/dbspfox1/biblio/P622/dev/data
zonedev/dbspfox1/biblio/P622/preprod 53.3G 57.6G 12.9G /zonedev/dbspfox1/biblio/P622/preprod
zonedev/dbspfox1/biblio/P622/preprod/data 40.4G 57.6G 40.4G /zonedev/dbspfox1/biblio/P622/preprod/data
bash-3.00# svcs -xv
svc:/system/filesystem/local:default (local file system mounts)
State: maintenance since Fri Nov 04 10:07:33 2011
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-filesystem-local:default.log
Impact: 33 dependent services are not running:
svc:/system/webconsole:console
svc:/system/filesystem/autofs:default
svc:/system/system-log:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default
svc:/application/autoreg:default
svc:/application/stosreg:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
svc:/network/smtp:sendmail
svc:/application/management/seaport:default
svc:/application/management/snmpdx:default
svc:/application/management/dmi:default
svc:/application/management/sma:default
svc:/network/sendmail-client:default
svc:/network/ssh:default
svc:/system/sysidtool:net
svc:/network/rpc/bind:default
svc:/network/nfs/nlockmgr:default
svc:/network/nfs/client:default
svc:/network/nfs/status:default
svc:/network/nfs/cbd:default
svc:/network/nfs/mapid:default
svc:/network/inetd:default
svc:/system/sysidtool:system
svc:/system/postrun:default
svc:/system/filesystem/volfs:default
svc:/system/cron:default
svc:/application/font/fc-cache:default
svc:/system/boot-archive-update:default
svc:/network/shares/group:default
svc:/network/shares/group:zfs
svc:/system/sac:default
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Fri Nov 04 10:07:31 2011
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M gssd
Impact: 17 dependent services are not running:
svc:/network/nfs/client:default
svc:/system/filesystem/autofs:default
svc:/system/webconsole:console
svc:/system/system-log:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default
svc:/application/autoreg:default
svc:/application/stosreg:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
svc:/network/smtp:sendmail
svc:/application/management/seaport:default
svc:/application/management/snmpdx:default
svc:/application/management/dmi:default
svc:/application/management/sma:default
svc:/network/sendmail-client:default
svc:/network/ssh:default
svc:/application/print/server:default (LP print server)
State: disabled since Fri Nov 04 10:07:31 2011
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 1 dependent service is not running:
svc:/application/print/ipp-listener:default
svc:/network/rpc/smserver:default (removable media management)
State: uninitialized since Fri Nov 04 10:07:32 2011
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M rpc.smserverd
Impact: 1 dependent service is not running:
svc:/system/filesystem/volfs:default
svc:/network/rpc/rstat:default (kernel statistics server)
State: uninitialized since Fri Nov 04 10:07:31 2011
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M rpc.rstatd
See: man -M /usr/share/man -s 1M rstatd
Impact: 1 dependent service is not running:
svc:/application/management/sma:default
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/ 59G 1.1G 58G 2% /
/dev 59G 1.1G 58G 2% /dev
/lib 261G 7.5G 253G 3% /lib
/platform 261G 7.5G 253G 3% /platform
/sbin 261G 7.5G 253G 3% /sbin
/usr 261G 7.5G 253G 3% /usr
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 2.1G 248K 2.1G 1% /etc/svc/volatile
fd 0K 0K 0K 0% /dev/fd
swap 2.1G 0K 2.1G 0% /tmp
swap 2.1G 16K 2.1G 1% /var/run
zonedev/dbspfox1/biblio
293G 23K 58G 1% /zonedev/dbspfox1/biblio
zonedev/dbspfox1/biblio/P622
293G 10G 58G 16% /zonedev/dbspfox1/biblio/P622
zonedev/dbspfox1/biblio/P622/31mars
293G 47G 58G 46% /zonedev/dbspfox1/biblio/P622/31mars
zonedev/dbspfox1/biblio/P622/31mars/data
293G 34G 58G 38% /zonedev/dbspfox1/biblio/P622/31mars/data
zonedev/dbspfox1/biblio/P622/dev/data
293G 40G 58G 41% /zonedev/dbspfox1/biblio/P622/dev/data
zonedev/dbspfox1/biblio/P622/preprod
293G 13G 58G 19% /zonedev/dbspfox1/biblio/P622/preprod
zonedev/dbspfox1/biblio/P622/preprod/data
293G 40G 58G 42% /zonedev/dbspfox1/biblio/P622/preprod/data
What i missed? what happen with zfs dev directory?
thank you
Walter

Hi
I finally found the problem.
ZFS naming restrictions:
names must begin with a letter
Walter

Problem with Dataguarg ORA-01102: cannot mount database in EXCLUSIVE mode

Hi,
I'm trying to create a physical standby database on my Oracle9i DB runing
on WinXP.
Note: I have both Primary and Standby on the same system.
Actually everything went well .... I did created the standby DB but the problem
is I can not start my primary DB if my standby DB is mounted.
I get this error:
ORA-01102: cannot mount database in EXCLUSIVE mode
And when I read about the error message I learnt that I should start my DB in
compatible mode ... please how do I do that?
Or possibly how can I make this work.
Regards,
Cherish

Actually, I remember doing that in the Pry pfile but cannot really remember if I do that in the standby pfile.
I'll check and get back to you.
I'm very grateful for that.
Regards,
Cherish

After installing Mountain Lion doesn't external hard drives mount or stay mounted. Anybody else with this major problem?

After installing Mountain Lion doesn't external hard drives mount or stay mounted.
I have tried resetting my Mac's PRAM but the problem still remains.
Even USB memory sticks are unmounted efter a few seconds.
Anybody else with this major problem?

I have the same problem, although mine has not been solved by ESET update, finder settings, PRAM & SMC resets or anything else.
Don't get it, my external hard drive still works on both my housemates computers - one macbook pro (with snow leopard) and one dell, just not on mine with mountain lion.
Any ideas for me guys?

Cannot sign into my pc with icloud just reinstalled for the 3rd time!!! I am doing it all right there is a major problem!

cannot sign into my pc with icloud just reinstalled for the 3rd time!!! I am doing it all right there is a major problem! The wheel keeps spinning!!!!! says problem with server.

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

Problems mounting filesystem

Hey guys,
Today I tried to start my computer but I can't log in. During boot, it hangs for a while in the "Mounting filesystems" phase until it fails with a "Can't create /etc/mtab file" message. It also says "Maybe there is a stale lock".
How can I solve this? SLiM won't allow me to log in, it says it can't execute the log in command.
Thank you!

Blimey, I had to get home drunk to fix this!
I was being a wally and trying to find the files in /dev, when they were in /etc. There were three files - mtab~, mtab~1234 (some numbers) and mtab.fuselock, which I removed. And bam! Working fine now.
Cheers guys

Cannot mount USB disk in SIngle-user mode (solaris 10)

Hi all ,
I need some help please :
I can read/write to my USB disks when i'm in muti-user mode but when to I swith to single-user mode ( init S ), I cannot mount it.
in Single-user mode , i started volume management daemon :
#/etc/init.d/volgmt start
#volcheck
but i'm still not able to mount it.
I tried to mount manually:
#mount /dev/dsk/c2t0d0p0 /testpoint , i have this error: < mount : not a UFS magic number ( 0x0) , dev/dsk/c2t0d0p0 is not of this fstype.
My system recognizes the USB device though in single-user mode:
This is an output of #iostat -En
c2t0d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: BUFFALO Product: ClipDrive Revision: 2.00 Serial No:
Size:0.07GB <65339392 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0

Hi ,
thanks for your advice. My problem is resolved.
The USB drive was actually a FAT filesystem.
so I did # mount -F pcfs /dev/dsk/c2t0d0p0:c /testpoint and everything went fine
I can read/write to my USB disks when i'm in
muti-user mode but when to I swith to single-user
mode ( init S ), I cannot mount it.
in Single-user mode , i started volume management
daemon :
/etc/init.d/volgmt start
#volcheck
but i'm still not able to mount it.It probably requires other items to be started
first.
I tried to mount manually:
#mount /dev/dsk/c2t0d0p0 /testpoint , i have
this
error: < mount : not a UFS magic number ( 0x0) ,
dev/dsk/c2t0d0p0 is not of this fstype.
Looks like it's assuming UFS. If this is a pcfs
filesystem, give it the type on the mount line.
# mount -F pcfs /dev/dsk/c2t0d0p0 /testpointYeah, this was the right command, I had to specify option < -F pcfs >.
but I read somethere on this forum i had to specify :c as the drive for FAT at the end of c2t0d0p0 , so the full command was:
# mount -F pcfs /dev/dsk/c2t0d0p0:c /testpoint
>
DarrenThanks,
Sakolan.

What does this error mean and how to mount filesystem

I umount one filesystem like this:
# umount -F /export/home1
Then I tried to mount it back as:
# mount /dev/dsk/c1t0d0s6 /export/home1
mount: I/O error
mount: cannot mount /dev/dsk/c1t0d0s6
partition /dev/dsk/c1t0d0s6 and directory /export/home1 all exist in the system. Why can I not mount it back. Please help. I am waiting. Thanks.
Message was edited by:
duke0002

# mount /dev/dsk/c1t0d0s6 /export/home1
mount: I/O error
mount: cannot mount /dev/dsk/c1t0d0s6I/O error indicates that there is a problem communicating with that device.
You might use 'format' to see if the device is responding, and perhaps run a read analysis on it.
Maybe the disk has died? Bad cable?
Darren

Cannot mount external USB drive

During a recent update I remember pacman asking about replacing some package with another package to handle disk mounting. I think the added package was "gnome-volume-manager" or "gnome-disk-utility" (or both). I didn't see any postings describing problems with doing this, so went ahead and allowed the change. Now it's a few days later and I find I cannot mount an external USB hard drive anymore. It has an entry in fstab, and although I have tried mutiple edits of the device to associate the drive with, nothing works.
The disk used to associate with /dev/sdb1. Now this device no longer exists. Here is what has happened to my /dev/sd* entries:
brw-rw---- 1 root disk 8, 0 2009-10-27 11:08 /dev/sda
brw-rw---- 1 root disk 8, 3 2009-10-27 11:08 /dev/sda3
brw-rw---- 1 root disk 8, 1 2009-10-27 11:08 /dev/sda1
brw-rw---- 1 root disk 8, 2 2009-10-27 11:08 /dev/sda2
brw-rw---- 1 root disk 8, 4 2009-10-27 11:08 /dev/sda4
brw-rw---- 1 root storage 8, 16 2009-11-04 13:00 /dev/sdb
Trying to force association with "/dev/sdb" "/dev/sda5" (or some other number not in use) or "sdb1" (or 2,3,4, whatever) just yields "special device ... does not exist".
Does anybody know how to deal with this?
Does anybody know what package(s) I replaced when the update in question took place? I think I'd like to reverse whatever happened.
And on another note, I think another gnome-based package also recently replaced a package relating to printing. Yesterday I discovered I have printing problems too:
At first there were no printers found. Although cups is supposed to start according to rc.conf, cupsd was not running. I started it manually and then all the printers showed up again, though I cannot print duplex (again, worked fine before). What is going on with these gnome packages?!? Anyone know which package(s) I need to remove (and then what to put back) to make printing work like it used to also?
thanks much.

oddly, fdisk -l shows nothing, even for disks which are mounted (eg. /dev/sda4). when I insert a standard USB thumb drive, the following show up properly:
brw-rw---- 1 root storage 8, 32 2009-11-05 10:50 /dev/sdc
brw-rw---- 1 root storage 8, 33 2009-11-05 10:50 /dev/sdc1
and I am able to mount and use the drive as usual.
The external drive I've been struggling with has xfs for filesystem type. After using the thumb drive, /dev/sdb showed up spontaneously, but no /dev/sdb1. attempting to mount gives:
mount: /dev/sdb is not a valid block device
or
mount: special device /dev/sdb1 does not exist
depending on which device is specified in fstab.
I am thinking that either a) my ability to mount xfs filesystems has somehow been hosed, or b) there is something wrong with drive, which must have spontaneously failed very recently (it is less than 1 yr old, but this happens from time to time).
If the drive is okay, any ideas about how mounting xfs filesystems could have been broken by recent upgrades?
btw, the fstab entry (which worked fine until a couple days ago) is: /dev/sdb1 /mnt/external_1 xfs rw,noauto,user,exec 0 0

After boot can't mount SDS file systems on 3300 mount: cannot mount /dev/md

Hi
I have a SUNW,Netra-440 with two SE 3300 SCSI each with two controllers. The server was working fine but after a boot, it can not see the metadevices stored in the 3300.
I have tried restarting the SE3300 and a boot -r from ok prompt but I still can see those disks or partitions.
Metaset Import
metaset: log01: setname "appvol": no such set
mount all SVM filesystems for group appvol
mount: No such device
mount: cannot mount /dev/md/appvol/dsk/d101
mount: No such device
mount: cannot mount /dev/md/appvol/dsk/d102
mount: No such device
mount: cannot mount /dev/md/appvol/dsk/d103
mount: No such device
mount: cannot mount /dev/md/appvol/dsk/d104
mount: No such device
mount: cannot mount /dev/md/appvol/dsk/d105
mount: No such device
mount: cannot mount /dev/md/appvol/dsk/d106
metaset: log01: setname "dbvol": no such set
mount all SVM filesystems for group dbvol
mount: No such device
mount: cannot mount /dev/md/dbvol/dsk/d107
mount: No such device
mount: cannot mount /dev/md/dbvol/dsk/d108
i can see the devices in /dev/md/appvol but i can't mount them.
Any ideas what this could be? using metaset shows nothing, metastat -s dbvol hangs.
Am I missing some patch or am I missing something here? is the SE3300 damaged? or is it a problem with SDS (solstice). I have solaris 9.
The system was working fine until we had to boot and power off to perform power tests in the rack.
thanks
Ryck
this is the output of prtdiag
root@log01 >prtdiag
System Configuration: Sun Microsystems sun4u Netra 440
System clock frequency: 177 MHZ
Memory size: 8GB
==================================== CPUs ====================================
E$ CPU CPU Temperature
CPU Freq Size Implementation Mask Die Amb. Status Location
0 1593 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 - - online -
1 1593 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 - - online -
2 1593 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 - - online -
3 1593 MHz 1MB SUNW,UltraSPARC-IIIi 3.4 - - online -
================================= IO Devices =================================
Bus Freq Slot + Name +
Type MHz Status Path Model
pci 66 PCI5 scsi-pci1000,30 (scsi-2) LSI,1030
okay /pci@1c,600000/scsi@1
pci 66 PCI5 scsi-pci1000,30 (scsi-2) LSI,1030
okay /pci@1c,600000/scsi@1,1
pci 66 MB pci108e,abba (network) SUNW,pci-ce
okay /pci@1c,600000/network@2
pci 66 PCI4 scsi-pci1000,30 (scsi-2) LSI,1030
okay /pci@1d,700000/scsi@1
pci 66 PCI4 scsi-pci1000,30 (scsi-2) LSI,1030
okay /pci@1d,700000/scsi@1,1
pci 66 PCI2 pci100b,35 (network) SUNW,pci-x-qge
okay /pci@1d,700000/pci@2/network@0
pci 66 PCI2 pci100b,35 (network) SUNW,pci-x-qge
okay /pci@1d,700000/pci@2/network@1
pci 66 PCI2 pci100b,35 (network) SUNW,pci-x-qge
okay /pci@1d,700000/pci@2/network@2
pci 66 PCI2 pci100b,35 (network) SUNW,pci-x-qge
okay /pci@1d,700000/pci@2/network@3
pci 33 MB isa/su (serial)
okay /pci@1e,600000/isa@7/serial@0,3f8
pci 33 MB isa/su (serial)
okay /pci@1e,600000/isa@7/serial@0,2e8
pci 33 MB isa/rmc-comm-rmc_comm (seria+
okay /pci@1e,600000/isa@7/rmc-comm@0,3e8
pci 33 PCI0 SUNW,XVR-100 (display) SUNW,375-3290
okay /pci@1e,600000/SUNW,XVR-100
pci 33 MB pciclass,0c0310 (usb)
okay /pci@1e,600000/usb@a
pci 33 MB pciclass,0c0310 (usb)
okay /pci@1e,600000/usb@b
pci 33 MB pci10b9,5229 (ide)
okay /pci@1e,600000/ide@d
pci 66 MB pci108e,abba (network) SUNW,pci-ce
okay /pci@1f,700000/network@1
pci 66 MB scsi-pci1000,30 (scsi-2) LSI,1030
okay /pci@1f,700000/scsi@2
pci 66 MB scsi-pci1000,30 (scsi-2) LSI,1030
okay /pci@1f,700000/scsi@2,1
============================ Memory Configuration ============================
Segment Table:
Base Address Size Interleave Factor Contains
0x0 2GB 4 BankIDs 0,1,2,3
0x1000000000 2GB 4 BankIDs 16,17,18,19
0x2000000000 2GB 4 BankIDs 32,33,34,35
0x3000000000 2GB 4 BankIDs 48,49,50,51
Bank Table:
Physical Location
ID ControllerID GroupID Size Interleave Way
0 0 0 512MB 0,1,2,3
1 0 1 512MB
2 0 1 512MB
3 0 0 512MB
16 1 0 512MB 0,1,2,3
17 1 1 512MB
18 1 1 512MB
19 1 0 512MB
32 2 0 512MB 0,1,2,3
33 2 1 512MB
34 2 1 512MB
35 2 0 512MB
48 3 0 512MB 0,1,2,3
49 3 1 512MB
50 3 1 512MB
51 3 0 512MB
Memory Module Groups:
ControllerID GroupID Labels Status
0 0 C0/P0/B0/D0
0 0 C0/P0/B0/D1
0 1 C0/P0/B1/D0
0 1 C0/P0/B1/D1
1 0 C1/P0/B0/D0
1 0 C1/P0/B0/D1
1 1 C1/P0/B1/D0
1 1 C1/P0/B1/D1
2 0 C2/P0/B0/D0
2 0 C2/P0/B0/D1
2 1 C2/P0/B1/D0
2 1 C2/P0/B1/D1
3 0 C3/P0/B0/D0
3 0 C3/P0/B0/D1
3 1 C3/P0/B1/D0
3 1 C3/P0/B1/D1
root@log01 >

Hi,
thanks for your answer.
Yes format displays the physical devices, but metadb -i only shows the internal disks of the netra 440, not the ones in the 3320. metadb -s dbvol -i doesnt show anything.
metaset which is supposed to show me the metadevices, says the program is not registered.
cat /etc/lvm/md.tab has the configuration but since the scsi can be seen, the devices aren't mounted.
Any suggestions?
Cheers
Oscar
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848> bootdisk
/pci@1f,700000/scsi@2/sd@0,0
1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848> bootmirr
/pci@1f,700000/scsi@2/sd@1,0
2. c1t2d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848> spare1
/pci@1f,700000/scsi@2/sd@2,0
3. c1t3d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848> spare2
/pci@1f,700000/scsi@2/sd@3,0
4. c2t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> appvol
/pci@1c,600000/scsi@1/sd@8,0
5. c2t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> dbvol01
/pci@1c,600000/scsi@1/sd@9,0
6. c2t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> dbvol02
/pci@1c,600000/scsi@1/sd@a,0
7. c2t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> dbvol03
/pci@1c,600000/scsi@1/sd@b,0
8. c2t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> dbvol04
/pci@1c,600000/scsi@1/sd@c,0
9. c2t13d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> dbvol05
/pci@1c,600000/scsi@1/sd@d,0
10. c3t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> dbvol06
/pci@1c,600000/scsi@1,1/sd@8,0
11. c3t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> free1
/pci@1c,600000/scsi@1,1/sd@9,0
12. c3t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> free2
/pci@1c,600000/scsi@1,1/sd@a,0
13. c3t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> free3
/pci@1c,600000/scsi@1,1/sd@b,0
14. c3t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> hotAPP
/pci@1c,600000/scsi@1,1/sd@c,0
15. c3t13d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> hotDB
/pci@1c,600000/scsi@1,1/sd@d,0
16. c4t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> APPVOLm
/pci@1d,700000/scsi@1/sd@8,0
17. c4t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@1/sd@9,0
18. c4t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@1/sd@a,0
19. c4t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@1/sd@b,0
20. c4t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@1/sd@c,0
21. c4t13d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@1/sd@d,0
22. c5t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> d6Mirr
/pci@1d,700000/scsi@1,1/sd@8,0
23. c5t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> free1M
/pci@1d,700000/scsi@1,1/sd@9,0
24. c5t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> free2M
/pci@1d,700000/scsi@1,1/sd@a,0
25. c5t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> free3M
/pci@1d,700000/scsi@1,1/sd@b,0
26. c5t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@1,1/sd@c,0
27. c5t13d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> hotDBm
/pci@1d,700000/scsi@1,1/sd@d,0
root@log01 >metadb -i
flags first blk block count
a m p luo 16 8192 /dev/dsk/c1t0d0s7
a p luo 8208 8192 /dev/dsk/c1t0d0s7
a p luo 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7
r - replica does not have device relocation information
o - replica active prior to last mddb configuration change
u - replica is up to date
l - locator for this replica was read successfully
c - replica's location was in /etc/lvm/mddb.cf
p - replica's location was patched in kernel
m - replica is master, this is replica selected as input
W - replica has device write errors
a - replica is active, commits are occurring to this replica
M - replica had problem with master blocks
D - replica had problem with data blocks
F - replica had format problems
S - replica is too small to hold current data base
R - replica had device read errors
root@log01 >
root@log01 >metadb -i
flags first blk block count
a m p luo 16 8192 /dev/dsk/c1t0d0s7
a p luo 8208 8192 /dev/dsk/c1t0d0s7
a p luo 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7
r - replica does not have device relocation information
o - replica active prior to last mddb configuration change
u - replica is up to date
l - locator for this replica was read successfully
c - replica's location was in /etc/lvm/mddb.cf
p - replica's location was patched in kernel
m - replica is master, this is replica selected as input
W - replica has device write errors
a - replica is active, commits are occurring to this replica
M - replica had problem with master blocks
D - replica had problem with data blocks
F - replica had format problems
S - replica is too small to hold current data base
R - replica had device read errors
root@log01 >metadb -s appvol -i
metadb: log01: setname "appvol": no such set
root@log01 >metaset
metaset: log01: metad client create: RPC: Program not registered
root@log01 >cat /etc/lvm/md.tab
# Copyright 2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# ident "@(#)md.tab 2.4 02/01/29 SMI"
# md.tab
# metainit utility input file.
dbvol/d57 1 1 c2t12d0s0
dbvol/d58 1 1 c4t12d0s0
dbvol/d4 -m dbvol/d57 dbvol/d58 1
dbvol/d55 1 1 c2t11d0s0
dbvol/d56 1 1 c4t11d0s0
dbvol/d3 -m dbvol/d55 dbvol/d56 1
dbvol/d61 1 1 c3t8d0s0
dbvol/d62 1 1 c5t8d0s0
dbvol/d6 -m dbvol/d61 dbvol/d62 1
dbvol/d59 1 1 c2t13d0s0
dbvol/d60 1 1 c4t13d0s0
dbvol/d5 -m dbvol/d59 dbvol/d60 1
dbvol/d53 1 1 c2t10d0s0
dbvol/d54 1 1 c4t10d0s0
dbvol/d2 -m dbvol/d53 dbvol/d54 1
###dbvol/d51 1 1 c2t9d0s0
dbvol/d52 1 1 c4t9d0s0
#dbvol/d1 -m dbvol/d51 dbvol/d52 1
dbvol/d1 -m dbvol/d52 1
# SOFT Partitions
dbvol/d129 -p dbvol/d5 -o 19933376 -b 526336
dbvol/d128 -p dbvol/d5 -o 19407008 -b 526336
dbvol/d127 -p dbvol/d5 -o 18880640 -b 526336
dbvol/d126 -p dbvol/d5 -o 10489952 -b 8390656
dbvol/d125 -p dbvol/d5 -o 2099264 -b 8390656
dbvol/d123 -p dbvol/d4 -o 4724864 -b 133120
dbvol/d122 -p dbvol/d4 -o 4460640 -b 264192
dbvol/d121 -p dbvol/d4 -o 4196416 -b 264192
dbvol/d120 -p dbvol/d4 -o 32 -b 4196352
dbvol/d119 -p dbvol/d3 -o 30972032 -b 526336
dbvol/d118 -p dbvol/d3 -o 10489952 -b 20482048
dbvol/d117 -p dbvol/d3 -o 4196416 -b 6293504
dbvol/d116 -p dbvol/d3 -o 32 -b 4196352
dbvol/d115 -p dbvol/d2 -o 8925408 -b 526336
dbvol/d114 -p dbvol/d2 -o 8399040 -b 526336
dbvol/d113 -p dbvol/d2 -o 7872672 -b 526336
dbvol/d112 -p dbvol/d2 -o 7346304 -b 526336
dbvol/d111 -p dbvol/d2 -o 5247072 -b 2099200
dbvol/d110 -p dbvol/d2 -o 1050688 -b 4196352
dbvol/d109 -p dbvol/d2 -o 32 -b 1050624
dbvol/d108 -p dbvol/d1 -o 33554496 -b 1572864
dbvol/d107 -p dbvol/d1 -o 32 -b 33554432
dbvol/d124 -p dbvol/d5 -o 32 -b 2099200
dbvol/d138 -p dbvol/d4 -o 38416608 -b 133120
dbvol/d137 -p dbvol/d3 -o 31498400 -b 264192
dbvol/d136 -p dbvol/d4 -o 21637312 -b 16779264
dbvol/d135 -p dbvol/d4 -o 4858016 -b 16779264
dbvol/d134 -p dbvol/d6 -o 69212288 -b 23070720
dbvol/d133 -p dbvol/d6 -o 46141536 -b 23070720
dbvol/d132 -p dbvol/d6 -o 23070784 -b 23070720
dbvol/d131 -p dbvol/d6 -o 32 -b 23070720
dbvol/d130 -p dbvol/d5 -o 20459744 -b 526336
root@log01 >metadb -s dbvol -i
metadb: log01: setname "dbvol": no such set
root@log01 >\

Cannot mount Xsan volume on Mac Pro

Hi,
I installed a new workstation - a first Mac Pro in our PPC Xsan deployment. I installed Xsan, then latest updates. However, I cannot mount an Xsan volume on this workstation. This is an abstract from the log:
May 16 19:06:14 Mac-Pro kernel[0]: Xsan Client Revision 2.7.201 Build 7.23 Built for Darwin 8.0 Created on Mon Nov 13 11:53:07 PST 2006
May 16 19:06:14 Mac-Pro sudo: root : TTY=unknown ; PWD=/Library/Filesystems/Xsan/debug ; USER=root ; COMMAND=/sbin/kextload -v -s /Library/Filesystems/Xsan/debug /System/Library/Extensions/acfsctl.kext
May 16 19:06:14 Mac-Pro /Library/Filesystems/Xsan/bin/fsmpm: NSS: No FS Name Servers file - NAME SERVICE DISABLED.
May 16 19:06:14 Mac-Pro fsmpm[246]: Portmapper: ComputerInfo: computer_name = "Mac Pro", hostname = "Mac-Pro"
May 16 19:06:14 Mac-Pro fsmpm[246]: PortMapper: CVFS Volume Meta on device: /dev/rdisk1 (blk 0xe000003 raw 0xe000003) con: 2 lun: 0 state: 0xf4 inquiry [APPLE Xserve RAID 1.50] controller # '5000393000018365' serial # '5000393000018365L0' Size: 490190848 Sector Size: 512
May 16 19:06:14 Mac-Pro fsmpm[246]: PortMapper: CVFS Volume RAID2_Left on device: /dev/rdisk2 (blk 0xe000004 raw 0xe000004) con: 2 lun: 0 state: 0xf4 inquiry [APPLE Xserve RAID 1.50] controller # '5000393000018A78' serial # '5000393000018A78L0' Size: 5860554719 Sector Size: 512
May 16 19:06:14 Mac-Pro fsmpm[246]: PortMapper: CVFS Volume RAID2_Right on device: /dev/rdisk3 (blk 0xe000005 raw 0xe000005) con: 2 lun: 0 state: 0xf4 inquiry [APPLE Xserve RAID 1.50] controller # '5000393000018805' serial # '5000393000018805L0' Size: 5860554719 Sector Size: 512
May 16 19:06:14 Mac-Pro fsmpm[246]: PortMapper: CVFS Volume RAID1_Right on device: /dev/rdisk4 (blk 0xe000006 raw 0xe000006) con: 2 lun: 0 state: 0xf4 inquiry [APPLE Xserve RAID 1.50] controller # '5000393000018319' serial # '5000393000018319L0' Size: 5860554719 Sector Size: 512
May 16 19:06:15 Mac-Pro servermgrd: xsan: [52] main: Waited 21 secs for fsmpm to start (now running)
May 16 19:06:15 Mac-Pro fsmpm[246]: PortMapper: Local FSD client is registered.
May 16 19:06:17 Mac-Pro servermgrd: xsan: [52] Done waiting for fsmpm to start
May 16 19:06:40 Mac-Pro servermgrd: xsan: [52/358E60] ERROR: mountvolumenamed(EditSAN): Cannot mount volume, file system does not know about it.
I tried reinstalling Xsan on this workstation, re-entering a licence key to the Xsan admin and rewriting Xsan settings, with no success.
All of the other 10 PowerMac workstations can access the Xsan volume with no problems.
Your help would be highly appreciated.

Hi,
I am accessing this WS via ARD, so public LAN is definitely there. I have not connected the "Xsan" network (but it should be no problems communicating the Xsan traffic over this single LAN connection).
With the firewall, the situation is more strange. When I try to open the Firewall settings on Sharing, there is a dialog "Other firewall software is running on this computer." I googled this and it seems that this was a common problem on 10.3. They suggest to delete com.apple.sharing.firewall.plist file but it is not there on 10.4.
"sudo ipfw list" shows this:
00001 allow udp from any 626 to any dst-port 626
65535 allow ip from any to any
Any ideas on how to make Firewall behave as expected? I will try to reinstall if I don't receive a reply.
Thanks.

Invalid checksum or cannot mount image errors with disk copy

I just upgraded my B/W G3 from OS9 to OS X.2 and only have Internet explorer 5.1 for Mac for internet browsing. I can't even access the Apple downloads page and alternate browsers download as .dmg files. When I click the download I am prompted to pick a location....(I tried to open the files directly through applications/disk copy and that option is grayed out; I can only save files to the desktop) so I saved the files to desktop and when I try to use disk copy to open them, I get either invalid checksum or cannot mount image errors. I am a brand new Mac user and understand this is not Windows and all and I understand the process of dragging the icon to the apps folder, but I can't get that far, I am getting these errors and can't figure out what I'm doing wrong, the icon that appears on the desktop after the download is an image of a hard drive, but on a sheet of paper, not an image of a hard drive itself.
I think this has to do with the errors, but don't know where to go from here. Any suggestions?

a few updates-corrections:
I am running OS 10.1 with the latest update being 10.1.5
I have upgraded the RAM to 896 mb with some memory chips I got from Ebay...worked like a charm!
The only browser I can get to install and run is Camino, which crashes sometimes but is way better than IE5 for Mac
The majority of downloads I find on the internet stil give me the cannot mount image error
I tried the firmware update but it wants OS9 installed....but I am pretty sure I ran that before I installed OS 10.1.....OS9 still exists on my hard drive, but is not accessable in 10.1
When I can get an image mounted, a lot of times the program loads in the dashboard, but immediately closes out
With all these issues, I am considering upgrading to OS 10.4 but am hesitant since I don't know if that is the core problem
This old Mac is really cool and a refreshing change from Windows and I don't want to give up on it, but I don't want to keep spending money on things that don't work.

Major Problem - Cannot Mount Filesystem

Similar Messages

Maybe you are looking for