Major stroke and rollover problem.

Major stroke and rollover problem.
Muse5 CC
On images I applied 6px inside stroke in rollover state.
On rollover in both preview mode and browser previews the image moves from its top left corner and overlaps the stroke.
Both when images are place inside a blank composition or anywhere basically.
On the composition frame also 6pix stroke were applied.
HELP!
Three screengrabs to illustrate this issue.
NORMAL STATE:
ROLLOVER ON COMPOSITION
ROLLOVER ON SINGLE IMAGE

Can anybody from Adobe help with this???
I have the exact same problem. Very annoing, i tried everything, but no solution...
Please guys!!!

Similar Messages

Major crashing and performance problems, apparently since 10.6.1

Hi there
Since I updated to 10.6.1, I've had significant problems with my black MacBook, Core 2 Duo 2.16Ghz. I get the spinning beach ball holding me up all the time (twice since I've started typing this message), the fan goes crazy, applications just crash and hang, and on a few occasions the whole window server has just crashed, killing all my apps and dumping me out at a login prompt.
I've looked in the console and seen a variety of messages, some related to Windowserver, e.g.:
[598] kCGErrorIllegalArgument: _CGXMapShmemInternal : Invalid shared memory id
[112] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 179)
[112] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x7 not owned by caller loginwindow
some related to I/O:
kernel disk0s2: I/O error.
and of course the latter make me think about disk problems. However the disk is only 6 months old, I replaced the one that came with the computer which died in March, and this one's been perfectly alright up until now, so I've checked the disk with Disk Utility and /sbin/fsck -fy in single user mode, and both say there's nothing wrong with it. I have an external LaCie 2Big RAID attached by Firewire which is my TimeMachine volume, and I've run Disk Utility against that and again, it says there's no problem.
I've rebooted in safe mode, single user mode, verbose mode, all of it says everything's fine. I've switched off Spotlight indexing, as I thought it might be that. I'm getting nowhere - haven't had a window server crash for a couple of days, but applications randomly take ages to start, cursors just hang waiting on the beach ball, and sometimes if I leave Activity Monitor running I see applications just go red "not responding" for a while and then just start responding again later, with nothing in the system/console/'all messages' log to indicate there was ever a problem.
I've got 168.3GB free space out of 250GB available on the boot disk; Activity Monitor says 1.17GB free RAM. 'top' says PhysMem: 1247M free. I've checked the memory in single user mode by running '/usr/bin/memtest all 20' and it says everything's fine.
There are a variety of other error messages, lots of warning to do with multiple kernel dependencies which I think are probably deprecation warnings, but a lot of which I don't know much detail about. The point is, none of this was happening before I upgraded to 10.6.1, and now that I have, it's making my computer nigh on unusable at times.
Anyone have any ideas?
Cheers,
Igor

Hi again. Right, Thursday night it crashed, just hanging there, so I force-restarted with the power button, and it wouldn't boot. disk0s2: I/O error in console. Great, dead disk, I think; well, a shame that neither Disk Utility nor fsck told me anything about it, but at least that explains things.
So today I went out and bought a Seagate Momentus 500GB 7200rpm 2.5" SATA disk, took it home, plugged it in, partitioned the disk, did a restore from Time Machine, and pressed "Restart from restored system". Bang. Nothing. Option-restart: only shows SL install DVD. Console: nothing. Reboot into installer, doesn't even show Seagate in Disk Utility. Swap old disk back in, same as before, disk I/O error. Try new one again, nothing. Start thinking I might be in for a big bill or a new Mac, try once more, boots fine. All working fine except Mail which gives me this:
"You can't use this version of Mail with this version of Mac OS X
You have Mail version 4.1 (1076/1075.2). It can't be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button."
So:
a) What might be up with the computer that it sometimes can't see the HD? I'm trying to make sure the disk is securely seated, but it's as far as I can see identical in shape to the last one, with which I carted the Mac around over the last few months without any such problems. Connections? Motherboard? SATA bus? How can I find out? This is going to be expensive, isn't it?
b) In the meantime, while I have the thing booted and working, how do I fix the above? I simply restored the whole system from a Time Machine backup about 4 hours before the computer died the other night, didn't do anything funny at all: how can the versions be wrong? Software Update says I have no updates necessary, where do I find an installer?
Cheers
i

MAJOR itunes and ipod problems

Ok I bought a brand new ipod shuffle today but I already had itunes installed.I installed itunes yesterday and placed some music in the library so it would be ready for today so I could transfer the music straight across.So itunes was working fine and I really got into the software.Today I eagerly plugged in my ipod shuffle and waited for something to happen but nothing did.I double clicked on itunes and even though it booted up the background was totally transparent I could just make out the fonts.An error message came up saying that the software needed to run my ipod wasnt installed correctly and that I needed to reinstall.
I have spent all of today reinstalling all Apple components,trying to find any information that will help on this site all to no avail.The shuffle is charging but itunes is completely knackered.Even with a fresh install the menus are transparent and it just will not connect to the shuffle.
After reading some posts on here it appears that there is a problem with the latest itunes software which doesnt help me at all.As a last resort I might try and find an older version of itunes can anybody help me with that please? Also can anybody help me with my problem or shed some light on it?
If I cant get it to work im taking the thing straight back.This is the first Apple product I have ever bought and its certainly going to be the last im well annoyed.

Thanks to everybody who tried to help me out. Despite installing an earlier version itunes still wouldnt work properly.It slowed up the computer and the itunes background was totally transparent with only text barely showing up. No matter what version I tried everytime I plugged in the shuffle it still said that the itunes software for the ipod was not installed correctly and I needed to reinstall.
After hours spent trying to make it work by uninstalling and reinstalling intunes and quicktime ive given up. Quicktime also had the same problem when booted up as the menu screen was distorted so apples software just doesnt work. The item has been sent straight back for a refund...
<Edited by Moderator>

Can't seem to properly lock a box in place with a stroke and transparent fill (problem when trying to duplicate other elements)

Hey guys! So quick rundown: I'm an Art Director in advertising and sometimes I need to mockup banner ads. Most of them require a 1PX border all around, so I need to create a box with no fill but with a 1PX stroke and keep that as the top most layer. What ends up happening though, even if that layer is locked, if I try to duplicate another layer via "ALT + drag", it will duplicate the top most layer which is this 1PX border.
Mind you, I have Auto-Select set to Layer, and I can work around this by turning off the 1PX border, or using "CMD + J". However, sometimes I might forget to turn it back on, so would wanna find a proper fix for this issue, and "CMD + J" is just not as comfortable as "ALT + drag" with a Wacom tablet.
Any ideas on what can be done? I'm assuming PS sees even the transparent section of that box as a clickable object since it's technically covering the entire size of the canvas, but logically I would love for it to ignore the transparent fill.
Thank you!

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

A seeming small change by Verizon causes major monetary and unrecoverable damages

A seeming small change by Verizon causes major monetary and unrecoverable damages
Back, I think in March or so, Verizon changed how they bill. Prior to this time frame my elderly mom paid the phone bill and I paid the DSL bill. The DSL bill came on my name and I paid by credit card and the phone bill came under her name and she paid by direct debit. She will not use a computer.
So, they make both bills on her name and won't change it. They did, however, allow the payment from my credit card.
The first unfortunate consequence was the internet speed suddenly dropped in speed by a factor of 2 to 1.5/364 and it did take me probably a month to notice it. NO ONE that I called was able to find the problem. It took multiple attempts until some bright “call in technician” said the problem is on their end and could be fixed in software. Thus, I believe, because of the name change, the provision changed too. The phone line crapped out too at this time.
The troubleshooting was stupid too. I took another modem and connected it directly to the NID and directly to the laptop and the technician on the phone said, it's either in your house or your modem and wanted to send me a new modem which they did. I don' get it. This is the wrong conclusion.
This shows the need of modems like Westell 2200 and the Westell 6100 because of the ability to measure line statistics and provisioned data rates.
Verizon sent me a D-link model DSL-2750B modem which I have to return because its just plain old stupid. It boasts Wireless n and the wired ports are 10/100. What's up with that? Next, there are no line stats and a horrible interface, akin to Verizon's website. Still can't figure out how to put it in Bridge mode. I own a D-link repeater and the interface is fine.
I asked them what modem they would send me and they would not tell me, so I got whatever piece of junk they had lying around.
I have now purchased a Network RAID array with no wireless access and with ~400 mb/s access rates. Yep, really stupid router.
Because of the number of outages, I have to be able to quickly switch from a bridge connected modem, Westel 6100) to one that is connected in direct mode, a Westell 2200 It's almost easy, but not quite, since the equipment is up in the rafters in the laundry room. The DSL cable is commercial terminated CAT5, which is rare. The modem is within 6' of the NID.
Plans include, the ability to switch the DSL line with a switch with positions for Modem #1 (Bridge), Modem #2(Wired), #3(RJ11 – Normal wiring) and #4: RJ-11 (Reverse wiring) and moving the direct connect jack for easy access. In any event, testing with the DSL modem at the NID is the gold standard.
In progress, is a 48 port Gigabit patch panel for phone and Ethernet, A separate 24 port RED patch panel will be bridged for phone.
I have already upgraded my network infrastructure to include a UPS for the network infrastructure and POE (Power over Ethernet) for the DSL modem. The UPS backup does not backup a repeater although it may in the future.
Now, let's go back to this seeming innocuous billing change.
So, this constant having to access the modem in the alternate configuration and a medical condition (migraines) that makes it hard to think clearly. So, in one of these episodes, I placed my laptop on top a container that was soaking laundry.
So, the LCD screen has to be replaced at $300 and the battery had to be replaced. Then the Ethernet cord to the modem got pulled and caused the laptop to fall on the floor. It worked for a few weeks and then suffered an UNRECOVERABE hard drive crash.
During this time frame, in fact over a 2 day period. My mom ended up in the hospital and to a rehab facility. My car ended up staying in the shop for a few days because of parts unavailability. My hard drive crashed and their was water in the basement. I don't have time for this.
Recovery would have cost $2004.00, if it were possible. I only have a drive image from 2011 which I have yet to try to use. I' now running UBUNTU Live rather than Windows 7 Pro. Some of the very important stuff was backed up on Flash, but a lot of stuff is gone forever.
Plans are to contact the billing office and the attorney general's office in the state where billing questions need to be resolved.
The last outage, fixed on July 27, was flagged as a phone outage by Verizon, when 18 routers supposedly died. 18 routers suspiciously means that they they were not adequately protected against surges. Verizon should look at the way DelMarVa Power reports outages: see: Delmarva, Put the usual World Wide Web Prefix and the COMercial domain suffix
For god's sake, quit making the website circular. I though Yahoo was the expert in that. I never visit Verizon's website unless there are problems. I mistaking thought I could find outage information, say using my phone's browser. This time I had to purchase service from CLEAR internet to ride me through this fix.
I know, you can't fix stupid and you can always find a better idiot. Comcast is looking more attractive.
Compensation of or my loss I will probably never get, but maybe with the help of the attorney general I can get the billing fixed. I do have power of attorney. Now, of course, the name the Verizon Website addresses me as is not right on this forum.
All, basically because of Verizon's unreliable network, incompetent people and the lack of maintenance of copper lines. The problem is, “We have little choice”. Currently, we need traditional land-line service to support an Emergency Response system. It's unclear whether digital phone lines support Faxes and alarm monitoring reliably.
I'll bet that there is NO WAY to tell Verizon if a service address as special needs like Emergency Medical reporting via phone or Internet, so that priorities for repair can be done properly. Utilities have that capability. Those ares with people with oxygen generators or other medical equipment get a higher priority,

That should not be happening. I sympathize with both of you (you and the the person who strated this thread). That sounds like the reason I would never want Dish.
I am fortunate that my service with Verizon Fios has been very reliable and that I haven't had too many issues over the years. But don't get me started on Verizon Wireless. I am through with doing any more business with them once my cell phone minutes run out. I love it when they say they have done everything the could to investigate such a simple issue with running my debit card transaction wrong and blaming it on my bank, i.e. running it through as a "debit" when I choose "credit" all of a sudden now two times in a row after 4 years of doing it right as "credit". And now they consider the issue closed on their end when nothing has been resolved. That's no way to treat a long time customer and I really felt treated like I was a bother to them. It's not like I ever paid them much money for this pre-paid cell phone service that I have used infrequently but I was really mad at the way they just wrote this off and pretty much told me "too bad". Talk about "customer non-service". It's also very hard to track the number of minutes left on my balance. I'm due for an upgrade anyway. I want to switch to the I-Phone from this flip phone but never again with Verizon Wireless. T-Mobile is way more attractive. Verizon Wireless is not only an entity separatedfrom Fios but it's definitely a much different animal and their customer service has really gone downhill. When you're treated like they don't care, it's maddening.
My customer service experience with Fios overall has been far superior to that most of the time. My setup is simple and even though there are some people who will inevitably complain about anything just to vent, I definitely believe at least some of what is posted here. And switching TV, phone, and Internet providers is a lot more involved than switching a cell phone provider.

Select Max and ResultSet Problem With Access

The following code is producing a 'null pointer excepetion' error and I know why it is occurring I just do not know how to fix the problem.
Basically I want to automitically generate a unique ID that is one number higher than the max ID (data is stored within an Access database). The ID field is made up of first and last initial taken from parsing previous login info ('JS-01', 'JS-02', ect.). If there are no IDs in the database that match your login info I want to set the new ID equal to 'JS-01' if your login is 'James Smith' for example.
The problem is explained within the code below.
<%
//define resultset and statement
ResultSet rss=null;
ResultSet rs=null;
Statement stmt=null;
//HERE IS WHERE YOU PARSE THE LOGIN INFO
String finitial = (String)session.getAttribute("vfirst");//vfirst=JIM
String linitial = (String)session.getAttribute("vlast");//vlast=SMITH
char f = finitial.charAt(0);
char n = linitial.charAt(0);
String sID = f+""+n;//NOW sID CONTAINS 'JS'
try {
//Using the current database connection create a statement
stmt=con.createStatement();
//QUERY TO SELECT MAX ID
//NOTE: CURRENTLY THERE ARE NO IDs LIKE 'JS' IN THE DATABASE !!!!!!
String sql="SELECT Max(ID) As MaxID FROM tblError Where ID LIKE '%"+sID+"%'" ;
rs = stmt.executeQuery(sql);
String newID;
//HERE THE RESULT SET SHOULD BE NULL BUT IT IS NOT. I KNOW THIS BECAUSE WHEN I REPLACE String iID WITH A LITERAL LIKE 'JS-03' THE LOGIC WILL EXECUTE CORRECTLY AND GIVE ME 'JS-04'. IF I LEAVE THE CODE LIKE IT IS THEN I GET THE NULL POINTER VALUE ERROR BECAUSE YOU CANNOT RESOLVE "MaxID" WHEN THE RESULT SET IS NULL. IF THE RESULT SET IS NULL IT SHOULD NOT EVEN EXECUTE ANY OF THIS CODE WITHIN THE 'if' STATEMENT, BUT IT IS. SO BASICALLY JSP IS LEAVING ME WITH A MAJOR OXYMORON AND I WOULD APPRECIATE ANY ADVICE THAT WOULD HELP ME SOLVE THIS PROBLEM.
if(rs.next()){
String iID = rs.getString("MaxID");
String letters = iID.substring(0,3);
int numbers = Integer.parseInt(iID.substring(3,5));
numbers = numbers + 1;
if(numbers < 10){
newID = letters + "0" + numbers;}
else{
newID = letters + numbers;
else{//IF THERE IS NO RESULT SET THAN THE ID SHOULD BE 'JS-01'
newID = sID + "-01";
%>
Because this an Access database I cannot use any null exception functions such as NVL or COALESCE which are specific to Oracle and SQL Server I beleive.

The max() will return a result set, even if the max value is null.
You should check to see if iID is null.
if(rs.next())
   String iID = rs.getString("MaxID");
   if (iID == null)
       newID = sID + "-01";
   else
      String letters = iID.substring(0,3);
      ... etc ...
}

Brush pressure and lag problem with CS4

I've been having a huge problem with Photoshop CS4 and the brushes. Whenever I go to brush, the pressure will turn off and on randomly with each stroke, and it lags horribly. I've installed CS4 on two computers with Windows 7, and both have this problem, but my old computer which had Vista was perfectly fine. I've tried downloading new versions of CS4, turning the OpenGL on and off, updating the GPU, downloading the Windows 7 tablet driver (that made it worst), and a bunch of other things. Nothing has worked, and this problem has been going on for two months. I'm starting to think the only way to fix this problem is by switching back to Vista. Can anyone please help me solve this? Thank you.
My computer is an HP that runs on Windows 7, my Tablet is a Wacom Intuos3, and I have Photoshop CS4 Extended 11.0.2

Others have reported that completely removing the tablet driver(s) first, then installing the very latest from the Wacom web site have made things work.
Good luck.
-Noel

Stroke and drop shadows on thumbnails

Hi there. I'm trying to add a stroke and drop shadow to my lightbox thumbnails. While both appear perfectly in design mode, as soon as I view the site in preview or in a browser they both disappear. Do you know what the problem might be? Many thanks! David

Hi David,
I tested this with Composition Lightbox as well as with Slideshow Lightbox and stroke and shadow worked fine in both the cases. I applied the effects on the Normal State. Can you please confirm on what widget have you used and on what state have you applied the effects? Also, do you have a URL for us to take a look at?
Regards,
Aish

Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

Back from nokia repair centre and MORE PROBLEMS

ok so this is my story....
i sent it in 2 weeks ago on thursday they said "its beyond repair and a 'new replacement is being shiped'".... BULL no what they did is the replace some of the phones guts and sent back the old shell with the new inners...
now the phone has major problems....
1 wrong software for wrong phone type(not that major just that the software that they put into my "new replacement phone" is for the white and blue not the red and black)
2 (fixed-ish Not really) the phone would make that beep when the volume is at its max when you press the volume rocker when on the phone.
3 Extreamly slow...
4 shuts off when making calls... SUCKS!!!!
5 i now have 2 ovi stores...
6 even the phones themes put in the wrong icons on the wrong apps...
OVERAL NOT HAPPY WITH NOKIAS SERVICE I NOW REGRET BUYING NOKIA I THOUGHT THIS COMPANY WAS AWESOME NOW AFTER SEEING THAT SO MANY OTHER PEOPLE HAVE MAJOR ISSUES AND REARLY DO THEY GET FIXED THE FIRST TIME, DO I SEE THAT I SHOULD HAVE RUN A BACKGROUND CHECK AS I USUALLY DO EVERY TIME I BUY SOMETHING FROM A COMPANY
its not too late nokia you can still make me and thousands of other happy... get great products out. get them right. even better idea get them right the first time. and MOST OF ALL listen to what your customers want

its not too late nokia you can still make me and thousands of other happy... get great products out. get them right. even better idea get them right the first time. and MOST OF ALL listen to what your customers want
You have to actually tell Nokia this is a users forum so your message in effect is not heard by Nokia .
jje

Audio on button rollover problem

Very very weird problem as I have six buttons in an Edge project all have the correct audiomp3 and ogg files dragged to the stage.
4 of the files play perfectly on mouseover but two do not.
I already did the obvious:
re did the files
re imported under a different name
pulled the problematic audio and inserted that with different buttons in ANOTHER test file and STILl either the audio plays once and thats it or it plays once and then plays backwards on another mouseover.
If I have to I can upload a file as this kinda stuff really irks me.
Can I upload the file?
R

FIXED IT!! Both the button image and rollover image were
saved as Buttons. Converting the rollover image to a Graphic solved
the problem. Now when I click my Pig, he turns into a juicy ham.
(Get it?) :)

Brush Opacity and Spacing Problem

I've run into two problems using the brush tool:
1. When I use a low opacity to gradually build up highlights in a drawing the opacity seems to skip a few strokes: Nothing is actually happening after a fes brush strokes and then suddenly there's a bright line, nothing inbetween. It looks like i was drawing with 50% opacity even though it was actually 5%. All other option such as pressure sensitivity are turend off.
2. When drawing a straight line with the brushtool, and then zooming in, I can see the individual spots that make up the brushstroke. It looks like brushspacing was on even though it wasn't.
I use cs6 on a windows 7 platform and have a wacom intuos 4.
my graphic card is a GeForceGT 540M

This should illustrate the problem- The brush was set with size and opacity set to pen pressure.
I just filled the screen row by row, left to right with marks. As you can see, at random times the brush loses all size and opacity sensitivity.
Imagine delicately trying to render something like hair and this happening regurlarly at random times!

Reset Default Stroke and Fill on Path Tools

DUH! I've only done this task a million times before, and now I’m flummoxed. About the third weird thing in as many weeks . . .
Here's what is what: a file I've used before with no problems, suddenly will not let me reset the default settings of no fill and 1 pt black stroke on the path tools. I know how to do it - make sure nothing is selected and then reset the default. Easy peasy.
After I reset, it shows the default settings everywhere (tools panel, control panel, swatches panel) then after drawing the path, the object has no fill and no stroke. I've reset many times and finally understand the definition of insanity: doing the same thing over and over and getting the same result!
I've also tried creating a local defaul with a Cyan fill and a Red stroke, and everything looks good to go, until I draw the rectangle. Then it's no fill and no stroke again.
I'm almost embarrassed asking this question, but now I’d like to know if there is an answer. Is it possible the file is corrupted? If so, is there anything one can do to save the file? I tried doing a Save As and converting it to CS6 but that didn’t work. I’ve rebuilt the Preferences (again).
Thank you (she says, sheepishly)
P. Bell

Thanks, Michael.
You got me thinking about the Object Styles.
I went in and found the Basics Graphic Frame was messed up, so I Redefined the Style and now everything is working.
I needed some fresh perspective. Thanks to you and Bhatnagar for responding to my question.
P. Bell

What tool can I insert in tool box to undo last stroke and return to where I previously left off, e.g., when I am writing an e=mail and part of the message is deleted--so I don't have to re-write the whole message again?

what tool can I insert in tool box to undo last stroke and return to where I previously left off, e.g., when I am writing an e=mail and part of the message is deleted--so I don't have to re-write the whole message again?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
If your problem is with Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

Strokes and reflection

Hi, I got of bit of the problem in illustrator. Using pen tool I drew lines (The ones on the right) wanted to copy them and have an a same stroke and shape on the left but problem is when I did that they've changed. What could I do so that I could copy them and rotating without losing the primary strokes?
Thank you

Estillo,
Or you may create the mirrored version(s) of the calligraphic brush(es) and apply that/those to the reflexion, and keep the strokes.
I tried to edit my first post, but too late.

Major stroke and rollover problem.

Similar Messages

Maybe you are looking for