Make an SSL connection to other server from ce WebAS

Hi all,
does anyone know what should I do to make an application that's running on my AS (I have the CE 7.1 SP4 installed) call a web service that is running on a remote server, which can be address only via ssl.
I have installed the certificate from the remote server in my jre security file with the keytool from sun.
I have added the certificate to my keys on nwa.
Does anyone know whether I should make another configurations?
Thanks in advance,
Best regards!
Vera

Problem resolved.

Similar Messages

Cannot connect to DI Server from IIS

Hi,
I have a working installation of IIS and DI server on my laptop (running XP SP1). On my laptop, I can make SOAP calls to the DI Server from .asp pages running on the IIS.
However, I installed the DI server on a Windows 2003 Server with IIS 6 and tried to use the same configurations. Now, I cannot get any connection to the DI Server. The DI Server log only displays information about the start and stop events (on my laptop, each SOAP request is recorded in the log). I examined the IIS log file and this is what I found:
2005-01-12 12:46:13 127.0.0.1 GET /default.htm - 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 200 0 0
2005-01-12 12:46:24 127.0.0.1 POST /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:47:21 10.169.32.4 OPTIONS / - 80 - 10.169.32.72 Microsoft-WebDAV-MiniRedir/5.1.2600 200 0 0
2005-01-12 12:47:21 10.169.32.4 PROPFIND /Data - 80 - 10.169.32.72 Microsoft-WebDAV-MiniRedir/5.1.2600 501 0 0
2005-01-12 12:47:21 10.169.32.4 PROPFIND /fijhsk00$ - 80 - 10.169.32.72 Microsoft-WebDAV-MiniRedir/5.1.2600 501 0 0
2005-01-12 12:47:50 127.0.0.1 POST /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:47:52 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:47:52 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:47:52 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:47:53 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:47:53 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:50:23 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:50:25 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:50:25 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
2005-01-12 12:50:26 127.0.0.1 GET /WebSAPManageSoap.asp |13|800a000d|Type_mismatch:_'Session' 80 - 127.0.0.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.2;.NETCLR+1.1.4322) 500 0 0
= = =
It seems obvious that something is wrong with WebSAPManageSoap.asp. However, the same file works fine on my laptop installation. Has anyone got experience or insights about this problem ?
Henry

Hello
I tried as Henry to do the same thing but I got a different error :
the log file of IIS is :
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2005-01-27 15:47:27
#Fields: date time s-sitename s-computername s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs-version cs(User-Agent) cs(Cookie) cs(Referer) cs-host sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken
2005-01-27 15:47:27 W3SVC1 SRV-DEV 192.168.2.120 POST /WebSAPManageSoap.asp - 80 - 62.39.108.237 HTTP/1.1 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.1;SV1;.NETCLR1.1.4322) - - 62.39.108.237 200 0 0 660 1571 3562
and the SOAP response is :
<?xml version="1.0" ?>
- <env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
- <env:Body>
- <env:Fault>
- <env:Code>
<env:Value>env:Receiver</env:Value>
- <env:Subcode>
<env:Value>-114</env:Value>
</env:Subcode>
</env:Code>
- <env:Reason>
<env:Text xml:lang="en">No Server Defined</env:Text>
</env:Reason>
- <env:Detail>
<Command>Login</Command>
</env:Detail>
</env:Fault>
</env:Body>
</env:Envelope>
The SOAP request is :
<?xml version="1.0" encoding="utf-16"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
    <Login xmlns="http://localhost/WebSAPManageSoap.asp">
      <DataBaseServer>localhost</DataBaseServer>
      <DataBaseName>SBODemo_US</DataBaseName>
      <DataBaseType>dst_MSSQL</DataBaseType>
      <DataBaseUserName>sa</DataBaseUserName>
      <DataBasePassword>123erty</DataBasePassword>
      <CompanyUserName>manager</CompanyUserName>
      <CompanyPassword>manager</CompanyPassword>
      <Language>ln_English</Language>
      <LicenseServer>srv-dev</LicenseServer>
    </Login>
</soap:Body>
</soap:Envelope>
On the same host I've installed DI SERVER, SBO and IIS and run the license server.
About this issue, I've created a message on the SAP Market place.
But if you have an idea...
Thanks
Jerome

Unable to connect to administration server from essbase console,

Hi All..
After successfully completely installation and configuration of essbase 11.1.2.3 iam unable to connect to administration server from essbase console,
and also while connecting to oracle database it says "oracle not found".
essbase 11.1.2.3 is installed in windows 2008 server R1.
kindly help us.

Hi John
and thanks again for the reply
These log files has following information
and rest of files are empty in the specified path.
        HyS9RaFrameworkAgentOut :
Java App Loader V1.3 (C)2006 by Hyperion Inc.
$> java -cp . -Dloader.application=xxx.app com.brio.one.common.utils.Loader [arguments]
> Reading application file 'C:\Oracle\Middleware\EPMSystem11R1\common\raframeworkrt\11.1.2.0\bin\agent.app'...
> Loading classes...
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/wksagent.jar ...OK
file:C:/Oracle/Middleware/modules/javax.activation_1.1.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/foundation.jar ..........OK
file:C:/Oracle/Middleware/oracle_common/lib/java/shared/jsch/0.1.37/jsch-0.1.37.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/iona63.jar ..................OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/comutil1_01.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/eiengine.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/misc/11.1.2.0/servlet-api.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/JakartaCommons/jakarta-commons.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/logJavaUtil.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/javax.zip ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bqservice.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bcel-5.1.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/scorecard-search-api.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/waservices.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar ...OK
file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity.dep_1.4.jar ...OK
file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity_1.4.jar ...OK
file:C:/Oracle/Middleware/modules/javax.mail_1.4.jar ...OK
> Creating URLClassLoader...
> Setting New Context ClassLoader...
> Loading Main class 'com.oracle.cmc.Agent'...
> Getting 'main' method...
> Starting application...
       HyS9EssbaseStudio_epmsystem1-syserr:
INFO    Server configuration file: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.
06:38:01 07/05/13 INFO    Logger configuration file: C:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.
06:38:01 07/05/13 INFO    Starting up.
06:38:01 07/05/13 INFO    Oracle Essbase Studio Server. Version 11.1.2.3.000, Build 4386, March 26 2013. Copyright © 2008 - 2013, Oracle. All rights reserved
06:38:14 07/05/13 (system) INFO    Root folder for flat datasource files has been created: `C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\.\datafiles`.
06:38:14 07/05/13 (system) WARNING Failed to load driver for sap.
06:38:14 07/05/13 (system) WARNING Failed to load driver for teradata.
06:38:14 07/05/13 (system) WARNING Failed to load driver for netezza.
06:38:17 07/05/13 (system) SEVERE Unable to establish connection to MySQL server: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
06:38:19 07/05/13 (system) SEVERE Unable to establish connection to MySQL server: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
06:38:19 07/05/13 (system) SEVERE Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.
   -------------- Exception --------------
   com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine.
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:91)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1507)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)
at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)
at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)
Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Cannot establish connection to MySQL server.
at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:130)
at com.hyperion.cp.driver.adapters.sql.SQLConnection$ConnectionPool.<init>(SQLConnection.java:1229)
at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)
at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:113)
at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:73)
... 11 more
Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1116)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:344)
at com.mysql.jdbc.ConnectionImpl.coreConnect(ConnectionImpl.java:2333)
at com.mysql.jdbc.ConnectionImpl.connectOneTryOnly(ConnectionImpl.java:2370)
at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2154)
at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:792)
at com.mysql.jdbc.JDBC4Connection.<init>(JDBC4Connection.java:47)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:381)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:305)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:207)
at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:123)
... 17 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:218)
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:257)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:294)
... 32 more

New install issue-unable to connect to DB server from a remote client.

Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.

user6391746 wrote:
Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.solution depends upon which ERROR is thrown.
Is COPY & PASTE broken for you?
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.

Error while connecting to SQL SERVER from OWB

HI All,
I got the following error while connecting to SQL SERVER from OWB(10gR2).
1). Created DSN with (GMSCADA)
2). tnsnames file is updated with the following information
GMSCADA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
(CONNECT_DATA =
(SERVICE_NAME = SA)
3). Tried to connect to SQL SERVER frm OWB
Username: sa
password: sa
host: 172.16.60.29
port: 1433
service name: GMSCADA
schema: sa
I got the following error, when I click Test Connection:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from OWB_3095
Regards,
Kumar.

Hi David,
What is Gateway, How I have to setup, Please let me know.
I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
Can u please let me know.
Regards,
Kumar.

How to connect to SQL Server from Forms 10g?

Hello all,
How do we connect to SQL Server database from Forms 10g?
In Oracle Metalink site they have suggested using Transparent Gateway for SQL Server as a solution.
But is there a way we can connect directly to SQL Server from Forms using an ODBC connection
without installing anything on the database server?
Pls help!
Regards,
Sam

Hello all,
I was able to connect to SQL Server from Oracle using Generic Connectivity (HSODBC).
Transparent gateway was not required.
Followed metalink note 109730.1
So, after I created a dblink to SQL Server, I created a synonym for the dblinked SQL Server table.
When I used the synonym as the table source in Oracle Forms, I got the following error while querying.
"ORA-02070 - ROWID is not supported in this context."
This is because Forms has an invisible ROWID field and when data is fetched from SQL Server table
no Rowid is fetched since SQL Server table doesn't have one.
Is there a way to overcome this issue or do we have populate the block manually using a SQL query ?
Pls suggest.
Regards,
Sam

Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver

i have some trouble with connecting MS SQL SERVER from ODI.
I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
could not load JDBS driver class..
thanks

After more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
Hope this helps other people...
Thanks to those of you who offered suggestions and things to check...much appreciated.
Robyn

Unable to connect to WSUS server from the console

I am not able to connect to WSUS server from WSUS console any more suddenly! "please verify that IIS on the server is correctly configured and is running'. I find out that Windows Process Activation Service is stuck in starting.
I killed it with taskkill command but I am not able to restart it. It gives 'Error 1053: the service did not respond to the start or control request in a timely fashion'.
There are some suggestion online but I am not comfortable with those solutions, I prefer to be guided by Microsoft TechNet, thanks.
Thang Mo

Hi,
are there any relevant entries in the system log viewer?
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :)

Unable to connect to Admin Server from second machine using WLST

Hello,
PROBLEM
Can't get WLST to connect to admin server from 2nd host to register the domain.
SETUP
I have 2 Centos VMs running on Oracle Virtual box in a single laptop. Both the VMs use "Bridged Networking".
VM-1 CONFIG
cat /etc/hosts
192.168.1.17
dom1 dom1.my mac1
192.168.1.51
centos2 mac2
VM-1 hosts admin server & one managed server
VM-2 CONFIG
192.168.1.51
mac2
192.168.1.17
centos1 mac1
VM-2 hosts just one managed server
I can start up admin on VM-1 fine. The node manager is reachable too. Both the VMs are can be pinged from each other. I can also telnet to the admin server's port ( telnet 192.168.1.17 7001) from the second server.
My HOST OS is Windows 7. I can ping from windows to both the VM IPs too. The reverse is working fine as well.
I've tried both mechanisms of copying the whole domain from machine 1 over to machine2 & also using the pack.sh/unpack.sh combinations to transfer the domains.
When I invoke WLST, this is what happens
./wlst.sh
CLASSPATH=/apps/prod/appservers/weblogic/wls_10_3_6/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/prod/appservers/weblogic/wls_10_3_6/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.25.x86_64/lib/tools.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/features/weblogic.server.modules_10.3.6.0.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/webservices.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/apps/prod/appservers/weblogic/wls_10_3_6/utils/config/10.3/config-launch.jar::/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbynet.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbyclient.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> connect('weblogic','weblogic123','t3://192.168.1.17:7001')
Connecting to t3://192.168.1.17:7001 with userid weblogic ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server : Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Fri Oct 11 17:11:07 NZDT 2013.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
wls:/offline>
Also, I can't invoke weblogic.Admin from the second VM despite setting the environment using "setWLSEnv.sh". i get the error "Error: Could not find or load main class weblogic.Admin".
Please could you help me fix this? I've spent 3 days now trying numerous things without much luck :-(
Kind Regards

Hi Raj,
Issue is with NM registry with domain home. Please follow the below steps and let us know the status.
1 . Check whether the node manager port ( default 5556 ) is opened for communication on both Admin and Managed server.
2 . After opening the port - We would need to enroll the node manager home with domain home to establish the communication between Admin and Managed server.
   a . Start the Administration Server.
   b . Using the Administration Console update the Node Manager credentials from the Advanced options under domain_nameArrow symbolSecurityArrow symbolGeneral.
   c . Invoke WLST and connect to an Administration Server using the connect command. See Using the WebLogic Scripting Tool in WebLogic Scripting Tool.
   d . Run nmEnroll using the following syntax:
        nmEnroll([domainDir], [nmHome])
Running nmEnroll() ensures that the correct Node Manager user and password token are supplied to each Managed Server. Once these are available for each Managed Server, you can use nmConnect() in a production environment.
Note:     You must run nmEnroll() on each machine that is running a Managed Server. Additionally, you should run nmEnroll() for each domain directory on each machine.
For more info : General Node Manager Configuration
Thanks
Lakshman

Help :Domain controler crash, how to connect to other server behind

Dear all,
I get my DC controller server which has crashed. it is server 2008 r2.
begind it I have an other server which runs virtual machines running TFS and CRM server 2011.
What is the easier way to get access to my other server as temporary solution for my users ? we have only 3 users.
I know that I can detached my other server from domaine but then how my users will be able to login the second server by passing the crash DC ?
Thnaks for your help

Hi wakefun,
Thanks for your feedback and sharing. Your time and efforts are highly appreciated.
Best regards,
Justin Gu

How to make the client connect to the server at the command prompt?

I found this code on IBM's website, it was a training session on servers and clients using java.
The code compiles fine and the server seems to start up properly when I use java Server 5000. I think whats happening is the server is running and listening for a connection on port 5000.
When I try to run the client I get the following error.
Exception in thread "main" java.lang.NoSuchMethodError: main
I see a start() method but no main. As far as I know, applications should all have main, it seems as if the person who wrote this kinda confused applets with application. Not that I would really know what happened.
If you have time, could you tell me if there's an easy fix for this? I would love to have this client/server working if it isn't too much trouble. As I have looked all over the net for a free client/server applet that will actually let me see the java code and none of the free ones do allow getting to their source.
Most of them allow you to customize them somewhat but also have built in advertising that can't be removed.
This is the closest I have come to finding one that lets me look under the hood. But alas it doesn't work out of the box and I don't know what to do to fix it.
Heres the code: Server:
import java.io.*;
import java.net.*;
import java.util.*;
public class Server
// The ServerSocket we'll use for accepting new connections
private ServerSocket ss;
// A mapping from sockets to DataOutputStreams. This will
// help us avoid having to create a DataOutputStream each time
// we want to write to a stream.
private Hashtable outputStreams = new Hashtable();
// Constructor and while-accept loop all in one.
public Server( int port ) throws IOException {
    // All we have to do is listen
    listen( port );
private void listen( int port ) throws IOException {
    // Create the ServerSocket
    ss = new ServerSocket( port );
    // Tell the world we're ready to go
    System.out.println( "Listening on "+ss );
    // Keep accepting connections forever
    while (true) {
      // Grab the next incoming connection
      Socket s = ss.accept();
      // Tell the world we've got it
      System.out.println( "Connection from "+s );
      // Create a DataOutputStream for writing data to the
      // other side
      DataOutputStream dout = new DataOutputStream( s.getOutputStream() );
      // Save this stream so we don't need to make it again
      outputStreams.put( s, dout );
      // Create a new thread for this connection, and then forget
      // about it
      new ServerThread( this, s );
// Get an enumeration of all the OutputStreams, one for each client
// connected to us
Enumeration getOutputStreams() {
    return outputStreams.elements();
// Send a message to all clients (utility routine)
void sendToAll( String message ) {
    // We synchronize on this because another thread might be
    // calling removeConnection() and this would screw us up
    // as we tried to walk through the list
    synchronized( outputStreams ) {
      // For each client ...
      for (Enumeration e = getOutputStreams(); e.hasMoreElements(); ) {
        // ... get the output stream ...
        DataOutputStream dout = (DataOutputStream)e.nextElement();
        // ... and send the message
        try {
          dout.writeUTF( message );
        } catch( IOException ie ) { System.out.println( ie ); }
// Remove a socket, and it's corresponding output stream, from our
// list. This is usually called by a connection thread that has
// discovered that the connectin to the client is dead.
void removeConnection( Socket s ) {
    // Synchronize so we don't mess up sendToAll() while it walks
    // down the list of all output streamsa
    synchronized( outputStreams ) {
      // Tell the world
      System.out.println( "Removing connection to "+s );
      // Remove it from our hashtable/list
      outputStreams.remove( s );
      // Make sure it's closed
      try {
        s.close();
      } catch( IOException ie ) {
        System.out.println( "Error closing "+s );
        ie.printStackTrace();
// Main routine
// Usage: java Server <port>
static public void main( String args[] ) throws Exception {
    // Get the port # from the command line
    int port = Integer.parseInt( args[0] );
    // Create a Server object, which will automatically begin
    // accepting connections.
    new Server( port );
}CLIENT:
import java.io.*;
import java.net.*;
public class ServerThread extends Thread
// The Server that spawned us
private Server server;
// The Socket connected to our client
private Socket socket;
// Constructor.
public ServerThread( Server server, Socket socket ) {
    // Save the parameters
    this.server = server;
    this.socket = socket;
    // Start up the thread
    start();
// This runs in a separate thread when start() is called in the
// constructor.
public void run() {
    try {
      // Create a DataInputStream for communication; the client
      // is using a DataOutputStream to write to us
      DataInputStream din = new DataInputStream( socket.getInputStream() );
      // Over and over, forever ...
      while (true) {
        // ... read the next message ...
        String message = din.readUTF();
        // ... tell the world ...
        System.out.println( "Sending "+message );
        // ... and have the server send it to all clients
        server.sendToAll( message );
    } catch( EOFException ie ) {
      // This doesn't need an error message
    } catch( IOException ie ) {
      // This does; tell the world!
      ie.printStackTrace();
    } finally {
      // The connection is closed for one reason or another,
      // so have the server dealing with it
      server.removeConnection( socket );
}Thanks for your time.

CLIENT:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.net.*;
public class Client extends Panel implements Runnable
// Components for the visual display of the chat windows
private TextField tf = new TextField();
private TextArea ta = new TextArea();
// The socket connecting us to the server
private Socket socket;
// The streams we communicate to the server; these come
// from the socket
private DataOutputStream dout;
private DataInputStream din;
// Constructor
public Client( String host, int port ) {
    // Set up the screen
    setLayout( new BorderLayout() );
    add( "North", tf );
    add( "Center", ta );
    // We want to receive messages when someone types a line
    // and hits return, using an anonymous class as
    // a callback
    tf.addActionListener( new ActionListener() {
      public void actionPerformed( ActionEvent e ) {
        processMessage( e.getActionCommand() );
    // Connect to the server
    try {
      // Initiate the connection
      socket = new Socket( host, port );
      // We got a connection! Tell the world
      System.out.println( "connected to "+socket );
      // Let's grab the streams and create DataInput/Output streams
      // from them
      din = new DataInputStream( socket.getInputStream() );
      dout = new DataOutputStream( socket.getOutputStream() );
      // Start a background thread for receiving messages
      new Thread( this ).start();
    } catch( IOException ie ) { System.out.println( ie ); }
// Gets called when the user types something
private void processMessage( String message ) {
    try {
      // Send it to the server
      dout.writeUTF( message );
      // Clear out text input field
      tf.setText( "" );
    } catch( IOException ie ) { System.out.println( ie ); }
// Background thread runs this: show messages from other window
public void run() {
    try {
      // Receive messages one-by-one, forever
      while (true) {
        // Get the next message
        String message = din.readUTF();
        // Print it to our text window
        ta.append( message+"\n" );
    } catch( IOException ie ) { System.out.println( ie ); }
import java.applet.*;
import java.awt.*;
import java.io.*;
import java.net.*;
public class ClientApplet extends Applet
public void init() {
    String host = getParameter( "192.168.1.47" );
    int port = Integer.parseInt( getParameter( "5000" ) );
    setLayout( new BorderLayout() );
    add( "Center", new Client( host, port ) );
}Sorry about that. Now when I run an html file with this applet I just get the x in the corner.
Thanks for looking.

Problem connecting to SQL Server from JDeveloper 10g using jdbc third party

I am using Oracle 10g Jdeveloper and I tried to setup a database
connection to SQL Server using various Drivers for JDBC as Merlin, jtds, inet.tds, etc.
(I had no problem to set up a connection to an Oracle Database using the
Oracle JDBC driver).
When I am testing the connection throughout the wizard, I do receive
this error message: "Unable to find driver:
com.microsoft.jdbc.sqlserver.SQLServerDriver".
I m not understanding from last 3 days where to place the corresponding JAR files so thaI may not get the Error.
When I hit n trialed at various directories of the JDeveloper as </rootDir/jdbc/lib>
</rootDir/lib>
</root/jdev/my Work/Application1/Project1/public_html>
</root/jdev/my Work/Application1/Project1/public_html/web-inf/>
when I tested the connection I do received:
"Unable to find driver:
xxx.xxx.xxx.xxxxxxx Unable to find driver:
Obviously it can't locate the Micrososft JDBC driver but I can't
figure out why.
I tried all kind of things without any success. Is somebody can help
me and took me beyond this.
I m trying to build DataSource connection from JavaBeans.
Please make me out of this cave. I m not finding any of the way to do this.
The last code I tried is
try {
Class.forName("com.inet.pool.PoolDriver");
com.inet.tds.TdsDataSource tds = new com.inet.tds.TdsDataSource();
tds.setServerName( "local" );
tds.setDatabaseName( "bluff" );
tds.setUser( dbUserName );
tds.setPassword( dbPassword );
DataSource ds = tds;
Connection con = ds.getConnection(dbUserName,dbPassword);
Statement stmt;
ResultSet rs = null;
Thanks,

you are confusing me at least as your error is discussing the microsoft driver yet you are configuring the inet datasource.
I do not use JDeveloper, but you need to make sure that whatever is servicing your web app/JavaBean has access to the driver. Not sure why you are not doing a JNDI look up of the resoure, but because you are not you can stick the driver jar in the lib directory within the WAR bundle. I would suggest that you add the driver to the lib/ext or the lib directory which is loaded at boot time for your web container and then use JNDI to look up your DataSource to reduce your coding maintenance headaches.

Error connecting to BOBJ server from Power Query

I am getting this error when I try to connect to the BO server from Power Query;
DataSource.Error: SapBusinessObjects: Unable to connect to the remote server
Details:
here it lists my URL which this posts didn't allow me to have.
I know my server is otherwise up and running. No problem connecting to Launchpad or CMC or IDT.
This is the 1st time I am using Power Query. What is missing?
Abdul

Hi,
This is a generic error about not being able to reach the server.
You should make sure that there are no typos in the hostname and to include the port number, which is 6405 by default.
e.g: http://powerquerysap:6405/biprws
Tristan

Query a List of Open WMI connections on a server from a remote system

We are monitoring a specific windows service on a server using Sitescope remote monitoring. The sitescope system uses a WMI method to Check if the service on a specific server is up or not. Initially it works like a charm but over time the WMI connections from
sitescope time out and we have been told that Sitescope is not closing the WMI connection it opens gracefully and the open connections pile up.
I am looking for a way to list open WMI connections to a specific service and/or server from a remote system and a way to kill those connections via a scheduled PowerShell (or batch/perl) script. I was able to list specific classes by -list parameter
of the Get-WmiObject cmdlet
but am unable to determine which class will give me the information that I require and the method to kill those connections.

Sitescope is not closing the WMI connection it opens gracefully and the open connections pile up.
1. It's not clear what "not closing the WMI connection it opens gracefully" means. WMI is a management technology that uses DCOM to connect to remote computers. (Is it really a question about DCOM?)
2. It's not clear what specifically "open connections pile up" means and what problem(s) it causes.
3. This is really a support question for that software's developer, not a question about WMI.
-- Bill Stewart [Bill_Stewart]

Error while creating Connection to BPEL Server From Jdev.

Hi All,
I Installed an Oracle XE database on my windows machine , and Run the IRCA tool to create Orabpel, Oraesb and Orawsm in the XE database
Deinstalled my current SOA Suite[Basic] and Reinstall the SOA Suite using the "advanced" option.
Started the server and could able to create a connection to AS, but when i try to create a connection to BPEL Server it's error out with below error message.
Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: FAILED
What could be the reason..
I didn't modified any file in AS directory with Database details ,Since while installing SOA Suite it asked for the DB Details and forced me to execute all the scripts against this DB,So i assume it knows the connection string.
Let me know how can i solve this issue.
Thanks in advance,
-Siddhardha

HI
In JDeveloper 10.1.3.1.0,
1. Click on the tab for the Connections navigator.
2. Right click on Application Server and select New Application Server Connection.
3. Enter a descriptive name for the new connection, and select the appropriate connection type from the drop down list. Click Next.
4. Specify oc4jadmin for User Name, then enter the oc4jadmin password. Click Next.
5. Select Single Instance for Connect To, then provide the host name where BPEL is installed, the OPMN port number, and the OC4J instance name (the default for 10.1.3.1 is oc4j_soa). Click Next.
6. Click Test Connection. If you have been successful, you should see "Success!"
7. Now, right click on Integration Server and select New Integration Server Connection.
8. Specify a connection name and click Next.
9. In the drop down list by Application Server, select the Application Server Connection you just created. Again, specify the host name where BPEL is installed and the port number. This port number will be the same that you specified for the Integration Server Connection to the home OC4J container. Click Next.
10. Test the connection. You should see something like:
Application Server: OK
BPEL Process Manager Server: OK
ESB Server: OK
11. Now, return to the Applications navigator, and try to redeploy your process using the Integration Server Connection just created. (It is possible that you will have to close JDeveloper and then reopen it for this to work.)
Cheers
Anirudh Pucha

Make an SSL connection to other server from ce WebAS

Similar Messages

Maybe you are looking for