Make NW-Activity Userfield Label appear as Choose Field in capacity repts.

Hi Gurus
Can you guys let me know, how to make " Userfield Label (given name) in a Network Actvity (internal) appear as Choose Field in capacity repts , (ex:CM07).
Example:
1) In SPRO I did give ALPHA as label/name for User Defined Text Field (USR003) for NW Activity.
2) I did find above user field, active and available for postings in NWA. I now maintained some text in this user field it for some internal activity (that having a Work Center and Capacity Planned).
3) When I run one of the capacity reports Ex: CM07, and try to access user fields from choose fields option, what I want is that this User Field to appear with its given label/name ALPHA, rather as it currently appearing as User Fld char (10).
I appreciate for your help in resolving my issue.
Regards
Madhukar

Hi Ahmed,
You can achieve this by using creating individual capacity for category type.
Steps:-
1.Go to Cr02 define capacity category 001 .
2.Now double click on capacity category it will open its header details.
3.Now assign individual capacity this will appear in project. as shown
5.In project u can assign same in capacity.
Reward if helpfull.
Thanks
Suraj Prakash

Similar Messages

How can I make row labels appear on the right

I am creating a timeline for a web development project in numbers
I have changed the content scale to get it to fit on two pages (it's illegible on one page) but the tasks are overlaid on the grey column containing row labels
How can I make the row labels appear on the right side instead of the left side?

Thanks Badunit - that was a big help
The counterintuitive part of this whole exercise is that to get the timeline printed as I want, I've got to leave the column representing Week 8 blank
Print View:
Normal View:
Numbers has got Excel beat in so many ways, but there are some baffling bits to it!

How to reorder columns and make all labels appear?

I have a chart in my 2008 R2 report:
I want to reorder these programs in alphabetical order and I want to display all programs. In the image above, see how only some of the program labels appear?
Here is some sample table data:
create table sample_programs
program_name varchar(25),
LOS int,
people_id int identity(1,1)
insert sample_programs values('transitional living',50),('educational services',65),('Residential Treatment', 77),
('Regular Foster Care', 23)
And the SSRS Chart Value expression:
=Sum(Fields!program_los.Value) /
(CountDistinct(Fields!people_id.Value))
Where program_name is the Category group.
Ryan D

Hi Ryan,
To reorder those programs in alphabetical order on the chart, we can add a sorting in the Category Group as below:
Sort by: [program_name] Order: A to Z
In your scenario, not all the categories (programs) are displayed. By default, auto fit property determines the interval of horizontal axis labels. In order to display all the programs, please try changing the interval to 1 will force the axis to display
all categories. For more detail, please refer to the similar thread below:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/68d79bb7-9564-4d6a-8a46-9d0ca83e435d/ssrs-2008-chart-does-not-show-all-yaxis-data-labels
Please let me know if you have any questions.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Smart guides labels appears but sometimes NOT.

When I am using smart guides in illustrator cs6 it is problem which makes me nervous.
When I select point, handles appear. When I move next to handle top the label appear. But SOMETIMES NOT appear, SOMETIMES APPEAR. It is terrible.
- It might be nice when labels ALWAYS APPEAR, WHEN I AM NEXT TO HANDLE TOP or NEXT TO THE ANCHOR POINT.
Because then I know, that when label appear, I can work with that concrete handle, or point.
I know, that it depends of the snapping tolerance, which I can set in Preferences. But when the snapping tolerance is too high, it is unpleasant to draw anything. When snapping tollerance is high i can draw objects on A4 leter which is usual, but my lines and handles are attached anytime when I do not want.
When I do not use smart guides it is unpleasant to draw lines too. Sometimes I grab handle when I want, but sometimes I fail.
I think it may be a good solution if you fix it so that the snapping tollerance will be lower, but labels will appear sooner and reliably.
I like Illustrator, InDesign and Photoshop. But this is the reason, why Illustrator makes me crazy, when I work there. Thanks

David,
I do not have align to pixel grid or snap to grid turned on
It sounds as if Illy thinks the former.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Curser and screen goes to sleep in the middle of working. Goes to the light gray where I have to click on the screen to make it active again.

I'll be typing away and all of a sudden it is like someone grabbed the curser and clicked on another window. The screen turnes light gray (not active window). Have to click on the screen to make it active again. Anyone know what to call this and how to fix it. Thanks in advance!!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

Lightroom 5 color labels appear dark causing mac pro monitor(s) to go black, have to restart, get a kernel panic os 10.7 5

I have a Mac Pro 12 core, with a Nvidia Quadro Pro 4000 video card. I have been using lightroom with this video card since 2011 without a problem. I updated to os 10.7.5, which apple says it is the latest f and now when i use lightroom (after about 15 minutes), my monitor goes black, which i am sure is a video card issue which involves lightroom settings, and i have to restart my system. After restart I get a kernel panic report. I unistalled lightroom, and had no crashes. I reinstalled it and i started to get computer crashes again. (not lightroom crashes but computer -) When i open lightroom, the color labels appear saturated and much darker than usual. I took a screenshot www.jlanceimaging.com/lrscreenshot.jpg.
Since updating to 10.7.5 i have had this issue with lightroom and the video card.
I also went into photoshop an unchecked the graphics processor but still got the crashes.
and last;y, i opened up lightroom 4 and had no problems

You don't say what, if anything, you have done to test, resolve or rule out causes, so you can always assume hard restarts, freezes, and not safe shutdowns will make for more problems (corrupt files, file system, directory, etc).
Running Apple Hardware Test; Reset SMC; repairing your drives; ruling out cables, controllers, external devices, even drivers for printers and other devices.
If you are on a UPS, it should be 1000VA or larger (1300-1500VA). If there are other devices and you could be exceeding the load on circuit breaker, also worth looking into and sometimes requires adding a new circuit line.
A good place to start is
http://www.apple.com/support/macpro articles and fixes
tips and faqs on how to resolve panics are also helpful.
http://www.macmaps.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html
When it started, whether it ever happened in the past with 10.5 or after adding a device or driver, too. All the skills for troubleshooting and taking notes.

I'm new to Ipad 2. I can bring up a website, but I can't make it active; i.e., log onto it and perform any functions within in. Help!!

I'm new to Ipad 2. I can bring up a website, but I can't make it active; i.e., perform any functions within the website. I cannot make the screen move -- nothing. Help!!

Can you navigate http://www.apple.com ?
Without knowing your credit union's web site it is hard to tell what the problem is.
Note that sites that use Flash will have problems as it is not supported.

Movement type 342 O is not listing in MB1b T.code, hw to make it active

Movement type 342 O is not listing in MB1b T.code, hw to make it active. i need to transfer post the materials to vendor.

Hi,
If it is not listed in the MB1B transaction then there is a very good reason and so just adding it is not going to work.
342 is the transfer from restricted to unrestricted and so is related to batches. The O you mention indicates stock with subcontractor. Do you actually mean 342 and not 542?
If you DO mean 342 then you should not try to do this via MB1B you have to use the correct process and do this via the batch functions.
Steve B

How to make the active save-to-file with the data from GPIB ?

Hello,,everybody !!
I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
Thank you in advance for anybody's help !!

Thanks Dennis,
I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
16:40:33 54.24
16:40:34 54.23
16:40:35 54.24
I want to get rid of the blank line in between.. Do you have the idea about it ?

Make Hyperlinks Active works on URL, not on PDF files

When I'm working on my site and click "make hyperlinks active" to test them, the link associated with a web page at another site on the Internet works, but the hyperlinks associated with pdf files I've selected on my computer don't work. I click and nothing happens.
When I check the files on the computer and just click on the they open fine. They won't work from iWeb, however, when I check make hyperlinks active.
When I uploaded the site, and tried to download the pdf files by clicking on the links on my site, some worked and some didn't. Some opened rather quickly, some took forever.
ANY AND ALL HELP IS APPRECIATED.
Rex

The link to a file doesn't work in the iWeb application
Publish your site to a folder on the desktop, launch it in your browser by double clicking the index.html file and click on your PDF link to see if it directs you to its location on your hard drive.
If it doesn't, you have not set it up correctly in iWeb.
If you are uploading to a server other than .Mac, open an appropriate page folder on your server using your FTP application to see if the PDF or Zip file is actually there.

Front page opens works shortly freezes. only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally. The restart saved tabs does not work on that first page.

front page opens works shortly freezes.
only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
The restart saved tabs does not work on that first page.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

What exactly does "Make AppleTalk Active" do?

Hi,
*System Preferences > Network > Ethernet > AppleTalk > Make AppleTalk Active*.
I would like to know specifically/technically what exactly this option does?
When connecting to OS X Macs, and Windows boxes publishing AppleTalk/AppleShare/AFP, there does not seem to be any need to have this option enabled.
However, I am in an argument with a tech support guy at the moment, who is trying to claim that unless this option is enabled, connecting via AFP [1] is not true AFP...
I know AppleTalk is a collection of protocols implemented in the 80s some time. And I know that AFP on Tiger is basically AppleShare over TCP/IP, and that AppleTalk over AppleTalk is not supported by Tiger.
I suspect the Make AppleTalk Active option is somehow related to supporting AppleTalk sharing with old Mac systems, OS9,8,7 etc. But I really need to know exactly.
Thanks.
+[1] in this case, it is relating to sharing files between Tiger 10.4.10 systems and a Windows XP based RIP which is publishing some flavour of AppleShare.+

Chris--
My understanding is that AppleTalk is the protocol, like TCP/IP is a protocol. That's what this page implies to me:
http://www.protocols.com/pbook/appletalk.htm
So, at its inception, AppleTalk was a network transport protocol. There was a time when you could build an AppleTalk network without using TCP/IP, TCP/IP was only for the Internet (if you even knew what that was). You would just connect up some cables (not even ethernet, necessarily), and you'd get a network. It was pretty slow, but ethernet stuff was wicked expensive, so it didn't matter. AppleTalk handled the network transport, and AFP was a part of that.
Sometime before OS 9 came out, Apple moved the AFP part to TCP/IP. AppleTalk was still available, mostly because of the legions of people who had old printers that only had AppleTalk (I know I was one of them until March of this year, when my LaserWriter Pro 600 gave up the ghost). If I had to guess I'd guess it's been almost ten years since they moved to AFP over TCP/IP. Certainly it was before OS 9.
If you want to try connecting to the Windows Server via AppleTalk, you can try changing the URL in the dialog you get when you use the Finder's "Connect to Server..." menu item. I think, if I remember correctly, it takes this form:
<pre class="command">afp://at/serveraddress:*/</pre>
If that doesn't work, then take out one "/" after "afp:".
charlie

When you make a Apple ID how can you choose none for credit card type

When you make a Apple ID how can you choose none for credit card type

You need to follow the instructions on this page when creating a new account : http://support.apple.com/kb/HT2534 - otherwise you won't get the 'none' option and you will need to enter credit card details before you will be able to use the account in the store

How to make Avery 8160 address labels using pages

Anyone know how to make Avery 8160 address labels using Pages?

Open the Avery 8160 Word template from their website.
Peter

Make NW-Activity Userfield Label appear as Choose Field in capacity repts.

Similar Messages

Maybe you are looking for