Make to order WIP calculation with minus WIP

Dear Grus!
I'm in the make to order senario ,and using actual cost in WIP calculation.
finished goods using standard cost valuation.
Input 1000, output ( 100 USD *15EA), wip qty is 5EA.
now WIP become minus, so system generates error message.
How I should configure in a correct way?
Thank you ~
Lynn

Thanks for your answers,
The message number is
Plan cost <= actual cost. Cannot use method of apportionment (K,R)
Message no. KJ228
Sum across all apportionment numbers = 0. Cannot use MOA (K,R)
Message no. KJ233
MOA for reserves for unrealized costs in period 005 2009 was changed
Message no. KJ221
Negative wip indicatest that 1) you are not finished with the order and 2) at the WIP point in time, more value has been credited to the order that was issued to the order.
This could be due to failed goods movements or incomplete confirmations, out of date cost estimates, etc.
and standard cost is a little bit high, so the WIP balance is minus.
Br
Lynn

Similar Messages

Process/Production Order WIP Reverse on Month starting date with postiing d

Hi Experts,
Is it possible to reverse the WIP of Production/Process Order at month starting date eg. 01/07/09. Posting date & Document date should be: 01/070/09.
In my current project production is batch management system. Some of the batches start at month ending days (Eg. 29/06/09) for we calculated WIP at dated: 30/06/09.
My Client wants to reverse that WIP next day, month starting hours Eg. 01/07/09 but while reversing the WIP system is posting the WIP reversing doc. posting date is 31/07/09.
Same batch which started production on 29/06/06 is closed at 03/07/09 as well as goods received same date. FG Stock A/c updated in accounting books.
At the same day If I print my trail balance system showing the Stock value double (WIP stock as well as FG stock)
First Month
Eg. Process Order WIP at 30/06/09                              : 50000/-INR
Second Month
      WIP Reversal Posting date:31/07/09 by system     : 50000/-INR
      FG Stock received at 03/07/09                               : 50000/-INR
If I Print Trail Balance on 03/07/09 system shows        : 1, 00, 000/-INR (based on Posting date)
Which is wrong..
Please tell me the way for Change the Posting date of WIP reverse document. OSS guys are replying as consulting issue.
I am waiting for your valuable reply.
Thanks & regards
Bhagiradha

In KO88, CO88 Select Menu bar Extras-> Posting date
Enter Posting and execute
Thanks for Rajesh (SAP Labs)
Thnaks & Regards
Bhagiradh

WIP - Make to-Order e Make-to-Stock

Boa tarde,
Saberiam me informar se a configuração/cálculo de WIP é o mesmo para os processos Make-to-Order e Make-to-Stock?
obrigada,

Olá, creio que a configuração é a mesma, porém é importante verificar se no processo de Make-to Stock é utilizado coletor de custos ou ordem de produção. No geral coletor de custo não utiliza wip.
Olhe o caminho no spro. Tem uma pasta de work in process tanto em Product Cost by Period e Product Cost by Order.
No caso do coletor tem algumas configs a mais, porém a maioria das transações são as mesmas.
O que vc pode fazer é configurar chaves diferentes caso vc queira que os status de wip sejam diferentes.
Boa Sorte.

Sales OH and Corporate OH computation in order WIP Valuation

Hi All,
While reviewing production order bookings it is observed that at the time of
running monthly "overhead run", system is calculating corporate overhead
and sales overhead and debiting production order. Since at standard cost
run, corporate OH and Sales OH is not being considered in inventory
valuation, hence production order is credited with cost of goods
manufactured level.
Now if the order is in open status, WIP valuation is happening like "Debit
in production order (incl corporate OH and Sales OH) minus Credit in the
production order (w/o corporate & sales OH).
Can you please suggest some way to follow for correct WIP valuation.
Regards,
Kumar

Hi Ajay,
Can you please let me know how can I assign these cost elements to line Id, when i create line id there is no option of assigning the cost elements. Can you please explain me how to do it.
Thanks for your support.
Regards,
Pavan Kajijpeta

Production order WIP and Settlement

Hi All,
We have some production order WIP calculation and settlement issue or May be Iu2019m not understating WIP calculation and settlement process.
I will explain my issue with an example.
We have one production order with qty 100 and Material consumption and labor is posted as follow.
Material USD100
Labor USD50
Before period close, we have received qty20 into inventory (GR) and USD300 posted to Inventory.
At period end when I run WIP calculation (KKAX), system is showing in "USD150-" into u201CType of WIP data Reserve for Unrealized costsu201D and this is not settling to FI and PCA.
Is this correct? Or am I missing any configuration? Please explain me.
Any help is appreciated.....
Thanks,
Anusha

Hi,
Thanks for your reply.
In OKGA-->update of WIP Calculation and Result Analysis transaction,we have assigned secondary cost elements(931XXXXX) to Controlling area, Version,RA key and Line Id to "K" and here we have WIP and Reserves.
In OKG8-->Define Posting Rules for Settling Work in Process,we have assigned only WIP secondary cost element from OKGA to P&L and Balance sheet accounts to "WIPR" RA category.
Do i need to assign "RESERVE" secondary cost element from OKGA to "WIPR" RA category in OKG8?
Any help is appreciated.
Thanks,
Anusha.

Make To Order With Credit Check.......

Dear Expert,
Could i know about Automatic Credit Check-Static and Make to Order with Credit Check...
Thanking you,

hi
in simple credit check it considers only the current sales order with the value assigned to the customer
but in automatic credit check we have two types
1. Static: it compares the value assigned to the customer with the value of open sales orders + value of open delivery documents + value of open billing documents + value of billing doc's posted into accounting but for which we have not recieved the payment..
2. Dynamic : the way of calculation is the same as static but the difference is we have horizon in dynamic credit check
Example: in static all the open doc's will be considered for credit check
but in dynamic if i give the horizon as 2 months
sales orders for which the delivery date falls after two months will not be considered
similarly delivery doc's whose billing date is after 2 months will not be considered..
etc
even though its a make to order it will be processed using doc type OR
you assing the credit group to the sales doc
that is suffecient
hope this helps
regards
ravi

Make to order with jit

dear all,
I have heard this in most automobiles they yes make to order jit concept.
what are the configurational changes that happen in this jit
can somebody send differntn scenarios of pharma and automobile industry would be more useful

hi
in simple credit check it considers only the current sales order with the value assigned to the customer
but in automatic credit check we have two types
1. Static: it compares the value assigned to the customer with the value of open sales orders + value of open delivery documents + value of open billing documents + value of billing doc's posted into accounting but for which we have not recieved the payment..
2. Dynamic : the way of calculation is the same as static but the difference is we have horizon in dynamic credit check
Example: in static all the open doc's will be considered for credit check
but in dynamic if i give the horizon as 2 months
sales orders for which the delivery date falls after two months will not be considered
similarly delivery doc's whose billing date is after 2 months will not be considered..
etc
even though its a make to order it will be processed using doc type OR
you assing the credit group to the sales doc
that is suffecient
hope this helps
regards
ravi

Sales order with ref to make to order and with ref to make to production...

My requirement is as follows:
Material code : Plant specific and MRP activated
In one sales organization the sales order should be created without limitation and with make to order type with ref to above material
Another sales organization the sale order should be created if stocks are available and with ref to make to production with above material.
The availability check rule as no check for first scenario and Individual requirement for second scenario.
can it possible ...........

Hi,
functionality of availabity check is it checks the material as per order if it is avialable then it confirms quantity & if not then u have to procure or manufacture.
Mts scenario works for sales from stock while mto to generate requirement via purchase requisition ir plan order.
however you can configure availabity check for both the scenario by selecting suitable checking group, requirement class, requirement type & schedule lines.
Reward if it helps u
Regards
Dev kumar

Make to order and stock both in one material with consignment

Hi Seniors
FERT Material = XYZ which is being used for Make to Order and Make to stock both.
In case of make to stock scenario from GR u2013 101 and PGI made @ std price. At the time of Consignment 631 mvt. No accounting document is generated. As per my knowledge its fine. No issue.
In case of Make to order scenario for above material.
Q.1   At the time of goods receipt (101 Mvt) from production order, accounting document is generated at the rate of Per unit target cost of production order and no variance shown on production order. Why not accounting document is created at Std price of Material?
Q.2 At the the time of consignment an accounting document generated with following entry.
    Finished Goods Inventory      Dr
    Price difference                   Dr
                    Finish Goods Inventory Cr
Why accounting document is generated at the time of consignment in case of make to order scenario? Pls confirm is this a sap standard behavour or anything wrong with me. As I told earlier that in case of make to stock when we make 631 mvt there is no accounting document generated.
Note: My standard price is on the base of mix costing using two production versions. Every time we create production order in each version.
Regards
Imdad

Hi Imdad
Q1: Why not accounting document is created at Std price of Material?
Check your req class... There is a Field called "Valuation"... your valuation depends on whether you select M or A there... You can decide to valuate based on CK11N std cost estimate or based on Sales order cost estimate / Prod order cost estimate
So, in a nut shell, you can configure the system to generate acc doc at CK11N Std cost also
Q2. Why accounting document is generated at the time of consignment in case of make to order scenario?
In my opinion, your MTO stock is maintained in Table EBEW.. Pls check that... WHen you do GR from Prod order, it resides in EBEW table..
However, when you send it as a cons stock, the link to sales order is lost and your stock is no longer a MTO stock.. Hence, it is valuated at CK11N Std Cost.... If there is a diff between CK11N cost and GR Price, then PRD is generated... Thats why you are seeing PRD in your case
BR, Ajay M

Make-to order with production in alternative plant

Hi,
We are thinking about implementing a scenario with Make-to Order production for our products, but with production in alternative plant (special procurement type 80).
For example, sales orders will be directed to plant A, but production should take place in plant B - and using a make-to order strategy (in our case planning strategy 50 - planning without final assembly).
Is there any problems with our approach, making it not feasible to implement? Is it even possible in SAP to combine MTO with special procurement key 80 (production in alternative plant)?
Is there any other issues that can be foreseen with using this type of production strategy?
Thanks in advance,
Lars

Hi,
The production strategy which you are going to use is very fine.
As per me there is one concern. Example you have created a sales order in Plnat A, in plant A that FG is handling through Special procurement 80, then in the MRP run system will be creating a planned order in Plant B without running MRP in plant B. In MD04 screen you can see planning plant as Plant A. In plant B, u r converting this planned order in to Production order and executing the production. While doing the GR against the production order, the goods receipt will happen directly in Plant A.
This is the one problem (Accountability) you can face.
Regards,
V. Suresh

Is it possible to make an order with danish keyboard and documentation

Hallo
I need a computer with danish keyboard so my question is
Is it possible to make an order with danish keyboard and documentation
Jesper Nielsen

You can give each track its own artwork. iTunes will normally display the artwork of track 1 in album listings. The individual track art will show in the small window at the top of the screen when playing, or the artwork panel of the mini player, or the now playing window on a device. Try it and see.
tt2

Make to order availability check scenario with production order

We have a make-to order scenario where we build custom products for our customers.
In SAP, we specify a strategy group so a production order is automatically generated when an sales order item is entered. However, we sometimes create a small amount of stock, in anticipation of an order. I would like the system to first check available stock in the system, beofre proposing a production order.
Is something like thi spossible thru configuration of the strategy group, or perhaps another method?
Regards
Ken

Hi,
In SPRO->Sales and Distribution->Basic Functions->Availability Check and Transfer of Requirements->Availability Check->Availability Check with ATP Logic or Against Planning->Carry Out Control For Availability Check
Select the Availability check and the Checking rule combination of intrest and if you select the details,here you define that stocks that are to be considered during availability check.

Make-To-Order MRP for components with unstricted-use stock

Dear Experts,
There is a finished goods of material with standard planning strategy group "20" in the material master.
There is a component e.g. material A, under the BOM of the FG material.
There is already enough unrestricted stock for material A which has no special stock indicator assigned.
After creating the sales order, I use MD50 to run the make-to-order MRP, but the result shows that there a purchase requisition has been generated for the material A with the sales order assigned and specail stock indicator = "E".
Is there any solution so that there will be no PR generated for mat A as there is enough unrestricted-use stock.
And in the production order of the FG, can the component only requires the unstricted-use stock instead of the "E" stock?
(It is ok for the FG goods receipt as "E" stock.)
Thanks a lot.

Hi Ram,
Thanks for your information.
I set the indi/coll = 2 and null for the strategy for the component material A
Just want to know, which strategy should I use for the finished goods? And any other setting for the finished goods and the component?
And which transaction MD02 or MD50 for the planning run for the finished goods?
In such setting, after the planning run , PR will be generated for the net external procurement?
Actaully my situation is that I just keep own stock for components, I want MRP to consider the own stock instead of sales order stock before generating PR.
Thanks for your help again.
Claude

Problem with Make to Order sales order

Hi,
We are facing a problem with sales order which has Make to order item catagory, Rescheduling is not happening for the sales order of this type. However, we have taken up this issue with SAP and SAP has replied that MTO sales order are Excluded from rescheduling program. SAP has suggested us to use CO28 to reschedule the Production order so that the changes can effect the corrorsponding sales order.
We have observed that when sales order is created with MTO item category, production order is automatically created but when we see the Requirement list in MD04 for the material there is an Exception message as '20' (Cancel process). After the production order is confirmed and goods reciept has done the quantity confirmed against the sales order is becoming ZERO and hence we could not able to create delivery for the sales order.
We kindly request you to help us in this regard. This is creating a big problem for our business.
Thanks counting on your support.
Warm Regards,
Sridhar Burugula

Dear ,
Did you check any sales order reference in your production order assingment tab? Did you check the cost roll up in sales order level based on the BOM and Routung created for dt FG?
I believe the link between Sales Order and Production order lies in requirement Type and Requirement Class in define planning strategy .
Check in you make to order planning stratgey -SPRO-Define Planning Strategy -Make To Order .Here you should keep the correct Requirement type for customer(OVZH) and requirement class (OVZG).
Check and revert
Regards
JH

Make-to-Order with Different Plant

Hi Experts,
I'd like to know how to implement business scenario of make-to-order but delivering plant (in Sales Order) is different with manufacturing plant (in Process Order). My client has material locking problem (huge batch records) so that my client wants to create new plant for delivering plant in order to minimize material locking problem. Is this scenario possible?
I have set parameter 'Share Lock' but it does not work to solve material locking problem. Batch level is set in material level.
Hope anyone can give me tricks or experience.
Best regards,
Heydarul Humam

Hi,
In OID2 -> In Application area O , For same order type assign different shop papers ..,
After doing config in OID2 , In Application area O , these shop papers wil be be avaialble for assigning to planning plant, planner group in OID3 .. , here assign each of these shop papers to different planning plant ..,
Now in IW32 system checks combination of order type to planning plant and defaults shop papers while printing ..
Note :- Here , If a particular shop paper is not assigned to an order type in OID2 , then u cannot default in printing via IW32 .for that order type and any planning plant ..
check it up
regrds
pushpa

Make to order WIP calculation with minus WIP

Similar Messages

Maybe you are looking for