Maker and Checker in ABAPHR

HI,
I got a requirement in hrabap. Maker can make changes of different perners of different infotypes. After changing, the records get locked. Checker can see the Locked infotypes of the Maker and he Unlock the infotypes. Then these infotypes will be saved in the database.
My requirement is how to findout the Locked infotypes of the Maker. Is there any function module exits to find out the lock status of all infotypes of the user.
Regards
prasad.m

Hi
Use function module ENQUEUE_E_TABLE and DEQUEUE_E_TABLE by passing the table name to lock and unlock info types.
Example:
Infotype 0001
Table name is PA0001 for infotype 0001
Need to pass table name PA0001 to function modules ENQUEUE_E_TABLE and DEQUEUE_E_TABLE to lock and unlock infotype
0001.
Regards
Srilaxmi

Similar Messages

TS3048 I changed the battery in my wireless keyboard and checked the batteries to make sure that they work. When I returned to my computer (the computer was already on) the keyboard would not work, no response at all. What do I do?

I changed the battery in my wireless keyboard and checked the batteries to make sure that they are good, I left the computer on while I changed the batteries. When I returned to the computer, the computer does not acknowledge the keyboard so I can't do any diagnostics. What do I do?

Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.

I have placed a check mark in the Block Pop-Up Windows box and when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?

I have placed a check mark in the Block Pop-Up Windows box but when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?
== This happened ==
Every time Firefox opened

See this:
http://kb.mozillazine.org/Popups_not_blocked#Other_software_disables_the_popup_blocker

TS3048 i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on

i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on

Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.

ITunes has unselected all of my songs in my Music Library. How do I make iTunes SELECT and CHECK all the songs in my Music Library?

I've just upgraded iTunes and iOS 5.1. Suddenly iTunes has UNSELECTED every song in my music library. When I pick "Select All" from the drop-down menu, all the songs are HIGHLIGHTED, but none of them are CHECKED. I can't manually check every song in my library. How do I get iTunes to SELECT and CHECK songs in my Music Library?

thanks! got it. it's the command key. hold it down while checking one of the boxes and the rest of them will be checked.

Items greyed out after upgrading and migrating to Sharepoint 2013 - Open and Check Out + Manage Document Option

Hi there,
Following a migration to SharePoint 2013, the follow options have been disabled (Open and Check out + Manage) (see below). These are critically important functions and make it very hard to make SharePoint a useable interface. Any guidance on how to resolve
these issues is greatly appreciated. This is not a branded website, and there has been no changes made to the standard interface.
Kind regards
Jarrad Koppen

I'm not sure what the easiest way is either. First, I would try to create a new site collection with a new library and see if you get the same behavior. If not, then its something in the upgrade process. If it does that also would point
to something being wrong in the way that javascript is being executed.
If it is happening everywhere I suspect you'll have to start tracing javascript using something like IE developer's toolbar to see why the status on those buttons isn't changing when you select a document. I'm not sure what else to suggest.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

I just bought this iPhone 4S second hand and during incoming and outgoing calls I can't hear the other person talk unless it's on speaker or if I have headphones in. I don't know what to do I've turned up my volume and checked my settings!! Need help

I Just bought a second hand iPhone 4S I am having issues with the hearing during incoming and outgoing calls, I have turned the volume up and checked my settings but I still have trouble hearing the other person speak. It works if it's on speaker or if I have headphones plugged in. I need help desperately!!!!! Any suggestions on what to do???

Hey Itsanaasaunders,
Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
http://support.apple.com/en-us/HT203800
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
- Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
- Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
- While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
1. Restart your iPhone and test again.
2. If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Thanks,
Matt M.

Make a check box in LiveCycle with a personal character or image as check mark ( info to share...)

Hello everybody,
It makes now several weeks i go trough the different forums to find a way to make the check mark of a check box in LiveCycle with a personal color instead of the default black mark, that seems to be the only option available.
I saw somebody else with that question, but no answer.
So i found a work around, that make the check box really flexible.
Here it is:
REMEMBER that this will work only with forms saved as dynamic PDF.
Open a new form in Livecycle.
1) Open Library panel ( Shift+F12) and select Check Box and put it in the page with the dimension and position you like and select it.
Open the Object panel ( Shift+F7), select field section and under Caption make it blank. Select Binding Section and under name write in ' CheckBox '. for the rest leave all the section values as they are.
2) In Library select, in the standard section, the icon for making a text object. Put it in the page and size it to your needs and put it on the top of the CheckBox. Select it.
In the Object Panel, Draw section and under Presence 'Visible'.
Open the Font panel ( Shift+F4) and under font section, Font : select the Wingdings font and choose the symbol to use as the mark, under Size : the size you need, under Style: font color you like. If the result of the mark is to your feel, set the object to 'invisible'. Leave all other values as they are.
Open the Hierarchy panel (Shift+F11), right click on the static object and rename it to ' CheckMarkModel ' .
For information : changing the text object to an image object let's you use an image for the mark in the checkbox.
3) In Library, select in the standard section the icon for making a Button. Put it in the page and size it to the CheckBox dimension and put it on the top of the text object. Select it. In the Object panel, under Caption : make it blank, under Appearance : select custom in the drop down list an in the dialog box that comes up set the edges to none and the
background to none. Leave the rest as it is.
Open the Hierarchy panel (Shift+F11), right click on the Button object and rename it to ' ClickCheckBoxButton ' .
Now open the Script Editor (Shift+Ctrl+F5), on the left under Show : select in the list the ' Click ' event, under Language : select JavaScript, copy to the window the following script :
if (CheckMarkOnOff.rawValue == "0")
CheckMarkOnOff.rawValue = "1";
CheckMarkModel.presence = "visible";
else if (CheckMarkOnOff.rawValue == "1")
CheckMarkModel.presence = "invisible";
CheckMarkOnOff.rawValue = "0";
4)Now put in the page an other Check Box, put it on the top of the Button object and select it. In the Object panel, Field section, under Caption : make it blank, under Appearance : none, under Presence : invisible, let the rest as it is. In the Value section, under Type : Read Only, under Default : Off. In the Binding section, under Name : name it CheckMarkOnOff, leave the rest as it is.
5) So you have now four objects in the page 1. In the Hierarchy panel set each object by dragging them in
this order :
CheckBox
CheckMarkModel
ClickCheckBoxButton
CheckMarkOnOff
In the form select all the objects and group them. If you copy the group as many times you need you automatically will have an other Check Box, ready to work.
So here you are with an personal Check Box.
Don't forget to set the preview PDF to dynamic under Menu /File/Form Properties, the in the dialog box that shows up /Default tab and under the XDP Preview format : select in the list an Acrobat Dynamic form.
REMEMBER that this will work only with forms saved as dynamic PDF.
If somebody from Adobe could upload the sample file i made, to the forum, so that anybody can download it to his computer, would be appreciated, email me at : [email protected] .
Regards Mike.

I also faced this same problem and there is an actual solution but it involves modifying the xml source for the checkbox - however it is a simple modification so if your not familiar with editing the xml source don't worry about that. Click on the checkbox you want to modify and then click on the XML Source tab. LiveCycle will take you to that point in the XML. Now, scroll down until the close of the ui node( </ui> )within the checkbox field and modify the font node to look like the following: </ui> -- close of UI node <fill> <color value="0,0,255"/> </fill> This produces a checkbox with a blue check mark. You can, of course, make the color any RGB number you want. You can then save that field in your library and reuse it anytime you want and it will always have that color checkmark. Good luck. -Andrew

Interactive fields and check boxes don't stay in tab order

Hi everyone. I'm creating a census form for my parish which contains questions and check boxes. I've laid out the first section of this form (called Household Member 1), then gone back and added all the text fields / check boxes in the order in which I want the user to be able to tab through the form. When I open the Tab Order dialogue box to make sure the user will be able to tab through the form correctly, all the fields / check boxes are in the correct order. Now I need the exact same sections repeated... Household Member 2, Household Member 3, etc. In total, there will be 7 sections on the form that request the exact same information. So after I get the first section the way I want it, I copy and paste, or drag and duplicate the section with all it's fields onto the next page. However, when I check the Tab Order on this subsequent sections, all of my check boxes have moved to the end of the list, requiring me to have to manually move each check box back into its correct position in the section. This happens every time I duplicate the section... I have to manually put the tabs in their correct order. I tried duplicating the entire page rather than just duplicating the section, and the same thing happens. These fixes are tedious to say the least. Any thoughts about how to fix this would be appreciated.
I'm using CS6 on a Mac with OS 10.8.3

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs. No iTunes now.

Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.
Now, iTunes won't launch and can't be updated. Please help.
If I have lost my music collection I will be switching platforms ASAP. It is insane that Apple has updates seemingly every day for their products.

I was in your same situation with 14 downloads and 14 attempts.
You have to make sure that your Mac is booting into 64 bit mode. You can make sure of this by going into System Preferences and scrolling down to 'Software' and making sure that you are booding with 64 bit Kexts.
If not, restart while holding the 6 and 4 keys down until you see the spinning gear wheel and try installng again.
BUT, what I also did was to go into Applications, click on the Lion installer, Get Info, and give yourself custom priviliges to Read And Write.
I did this simultaneously, and I don't know what function did it, but it worked for me, with no further downloads of the installer.
Good luck!

Need to print payment proposal and check

Hi guys, when i schedule my payment proposal, i need to be able to print it immediately at the proposal level so the client can see the proposal list and check....
right now its not printing...
please advise
thanks
Brian

Hello,
You need to change the variant.
That variant must have been used by somebody else with other payment run date and identification.
You need to change to your payment run date and identification key to your payment run date and identification.
Make sure that other entries like house bank, account ID, vendor number are correct.
Regards,
Ravi

Cancellation / Reversal of Credit memos and Check for payment

I have few cases where the credit memos and check for payment documents have been keyed with an incorrect posting date.
What should be best approach to reverse these transactions.

Hi Somchitra,
in such situations ideally you would use the cancellation document standing on the original document, alas, a credit memo has no target document.
You will need to create an invoice with exactly the same data as in the credit memo & then internally reconcile these transactions. If the credit memo was in itself generated from an invoice, you need to cancel that reconciliation first. After that you re-create the credit memo with exactly the same data, just with the correct dates.
To cancel the cheques for payment you need to cancel the payment itself with the original document date & 'Cancelled' will be put in the 'Remarks' on the cheque.
You will then need to recreate the payment with the correct dates.
If you have already confirmed the printing of the cheque, you'll need to issue a new cheque number & destroy the printed copy, if it hasn't been printed, you can select the appropriate number in the 'Cheque number confirmation' window.
As always when correcting transactions, please keep an eye on the stock transactions & make sure they are correct. Also, for auditing purposes, always enter an approriate text in the 'remarks'.
All the best,
Kerstin

How can i make a CHECK in an ALTER table, to compare 2 Variables of TWO different tab

I have 3 tables:
EVALUATION (No_expert, No_article)
EXPERT (No_expert, origine, name)
AUTHOR_ARTICLE (No_Article, Code_author)
AUTHOR (Code_author, Name, Original)
and my question is: How can i make a check to refuse each time an EXPERT ADDED to the EVALUATION table. If this one is an AUTHOR, in other words, the EVALUATION.No_expert must <> than AUTHOR.Code_author.
This is what i did but it doesn't work:
ALTER TABLE EVALUATION ADD CONSTRAINT No_expert
CHECK (EVALUATION.No_expert <> AUTHOR_ARTICLE.Code_author);
thank a lot
luong.

See Disabling (graying-out) Form Fields by Thom Parker. It covers both Acrobat and LiveCycle forms.

Urgent pls ---- How to install SAP XI and check SLD configuration

Hello,
Pls send me links/pdfs/how to guide links --- to install SAP XI and check SLD configuration.
Regards

Hi,
A copy:
Links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation: https://websmp202.sap-ag.de/~sapidb/011000358700009389172004E.PDF
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

Cheers,
*RAJ*

Maker and Checker in ABAPHR

Similar Messages

Maybe you are looking for