Making multi-angles projects

when i put the multi-angles stream on v2. it appeared " Cannot add the video asset. Incompatible GOP structure. Last valid timecode at: 00:00:00:00." & another box saying " One or more clip. could not be added to stream. Incompatible GOP structure. Last valid timecode at 00:00:00:00". So at last i failed to put the "multi" stream on v2. i tried putting the same clip as v1 on v2. it worked. What can i do to tackle the problem. Any friend who are familiar with the function. Please help me. The problem just drives me crazy! What's the correct procedure of making a multi-angle project. Many thanks for your solutions!!!

Try using one pass CBR to enocde the video streams, seems to usually cure this issue.

Similar Messages

Multi camera project, Online/Offline. Major issues reconnect/re-digitize

Ok gang I got brain bender.
3 camera show, Multi camera project shot Digi-beta. Brought the tapes (3@90min) in low res (dv50) and now I need up-res the files or as apple would call it “online/offline”
According to the book this can be done a few diffrent ways. I have explored these ways and I’m failing...very very badly.
Attempt #1.
- took time line into media manager made the sequence “offline” save the project to new folder in drive with new settings (10-bit). All looks good till you try to recapture at 10-bit. Clip names get changes and numerical extensions apple put on during “make new clip” don’t match. In short I have a show that wont go. FCP wants to digitize everything
Attempt #2
- took time line into media manager made the sequence “offline” Selected the clips batches of clips and then re-digitaized. Again clips don’t match and FCP wants to digitize everything.
This is where I need your help. What can I do to make this process work? Below are my next moves...but before I spend another 18 hours in a bay I want to make sure I get some other input.
Option 1)
Encode all the tapes in 10-bit, Try to reconnect. I would like to stay away from this because the space needed for 10-bit is out of this world and I do have other projects. Again I’m looking for that secret 1,2,3 to making clips only re-digitizing.
Option 2)
try some other method I haven't tried yet. ( this is the one I’m hoping for)
Thanks for your time an I hope it hear from you ASAP as I’m dying over here. Multi-clip with online/offline it’s exactly in the index in the FCP user guide. If any one has some posting or web pages I could book make for future that would be a big help.
Thank you all for your time in advance
Jeff

I must playback in Premiere the 4 video streams in real time
Good luck with that. Many folks have trouble with even one stream.
edit those offline low res copies to get my edit decision list
I'm not sure offline editing with AVCHD will be possible because of the folder structure. You may not be able to 'replace' the lower res copies with AVCHD.
My output format is Flash F4V 640x360 px square pixels for Internet playback.
Oh, man. Shooting HD of any flavor is just overkill that adds unnecessary work to the process. Have your client shoot in DV.

Key Press to Play Video, in multi-screen project

I have a timeline with multiple videos in it, all loaded as external videos with playback controls as the audio is important (all are 55 seconds long and high quality audio is vital). First of all I want a specific key pressed to play one of the videos. I've been playing around with event handlers, key press event, but nothing has worked.
This is a multi screen project I'm working on so is there any way to have two seperate windows of video 1080x1920 (that would play on two seperate screens to interact with eachother) or would I have to create a stage twice the width. I need two video clips to play simultaniously once a key is pressed.
I am a real beginner to flash so I really have no idea whether this is possible.
I'm doing this on Flash CS6 on a Mac in IOS 10.9.2
Thanks!

i'm not sure what you're trying to do with multiple screens but that should have no impact on using key listeners to control your timeline:
stage.addEventListener(KeyboardEvent.KEY_DOWN,f):
function f(e:KeyboardEvent):void{
trace(e.keyCode);

For some reason FCP is now making multi files when I capture called -av

For some reason FCP is now making multi files when I capture called -av
I capture one clip but I get 7 files.
sineparade live-1-av 1.91 GB
sineparade live-2-av 1.91 GB
sineparade live-3-av 1.91 GB
sineparade live-4-av 1.91 GB
sineparade live-5-av 1.91 GB
sineparade live-6-av 334.1 MB
sineparade live-av 1.91 GB
I don't know why this started in recent captures but it is eating up disk space as it is 7 times larger than it needs to be and only the last one works.

Is there a way to get these files to be joined together into one file easily. I capture on a FAT32 hard drive but then transfer the files onto my edit machine and would prefer to keep everything archived there as a single file.
Any programs or scripts that I can use. I have figured out that you can open each file in Quicktime and then save as a self contained file, but I was wondering if there is a better way.

Multi-cam project crashing in FCP

Hi,
I'm cutting a multi-cam project and the system I'm cutting on keeps crashing - and it appears to be crashing just after the auto save.
The project is a five camera shoot, all on XDCam EX3 35mbs 1080 / 25p (ingested into FCP, native clips are then combined into a multiclip & put into an HD Pro Res timeline - the Apple Pre-set: Apple ProRes 422(HQ) 1920x1080 50i version).
The system I'm working on is an 8 Core (2x2.8ghz quad core intel) with 16gb RAMM, OSX 10.5.8 (this isn't my own system)
The actual FCP project is still pretty small (currently only 24mb), although this will be increasing (I'm cutting 10x1 hour shows).
The system appears to hang up just after doing an autosave (I say this because the time stamps on the most recent autosave are usually within a minute or two of the crash). I get the spinning ball of death, and then the system crashes (although not always, it tends to crash about 40% of the time when the spinning ball of death appears).
I'm running the system fairly minimally: I've reduced the number of audio tracks playing in real time to 2, and the audio playback quality to Low (it's stand up comedy). I am running with the waveform showing on one audio track (I've crushed the other tracks so it's not showing - although I don't know if this means the audio waveform isn't being calculated for those tracks). I've only got one track of audio actually playing.
I've reduced the playback quality & frame rate to dynamic, but I am running 5 streams of EX3 35mbs vision through the multicam playback window, in a pro res sequence (1920x180).
I've already deleted the FCP preferences & zapped the P-RAMM a couple of times.
Any ideas on how I can reduce the crashes?
Thanks!

Thanks Shane & Tony,
I'll try that, fortunately we've only shot & ingested the first few shows, so we can still fit the transcoding process into our workflow. (I had heard this suggested prior to starting the edit, but wanted to avoid it if possible because of the extra work involved).
BTW, my method for transcoding the media to Pro Res for the two sequences that I've already edited, would be to identify the transcoded EX3 QT files that have been ingested (at desktop level), take these QT files into compressor, apply & run the standard apple Pro Res template, and then re-link the clips in FCP to the new transcoded media files (which would have identical names, but be the transcoded Pro Res Version). Then re-link the sequence.
Obviously, for the shows that I haven't cut yet, I'd just ingest, & then transcode the media, & re-import the transcoded Pro Res media ready for editing.
Do you have a better way of transcoding the EX3 files to re-link to the edited sequence?
Thanks!
Andrew

Aggregator - Multi-SCO Project

Hi all,
I tried to create a multi-SCO project by Aggregator, adding two modules (two Scorm 1.2 packages, first lesson and second lesson), but when I publish the project and try to see it, it doesn't work properly: the second module reset every two/three seconds.
I need to publish more lessons with dependences (for example: I can't see second lesson before ending the first one): it's possible?
Are there any options or settings?
Thank you in advance.
Chiara B.

Anyone?

Error sending multi-track project back to Final Cut Pro, can't open XML

I am an experienced Final Cut Pro user but just tried using Soundtrack Pro for the first time on a real project. I sent the audio from my Final Cut sequence to a Soundtrack Pro multi-track project, added a few effects and created some fade-ins and fade-outs, and then tried to Export back to Final Cut.
I selected "File > Export", named my file and selected "After Export > Send files to Final Cut Pro sequence."
Now in Final Cut an error appears that says "The document “Name.xml” could not be opened. Final Cut Pro cannot open files in the “Final Cut Pro XML File” format."
Am I crazy or is something wrong happening here? I can get the exported audio files to appear in my sequence if I select "File > Import > XML" in Final Cut, but after this whole process Final Cut seems to be functioning unreliably (after closing Final Cut and re-opening, I even once got a similar error that said "Final Cut cannot open files in the Final Cut Pro Project File format", which is obviously crazy).
Am I doing something wrong? Any advice would be greatly appreciated.

hi,
i have the same situation. expirienced in fcp, new in soundtrack pro.
similar message. did you find an solution ?

How do I get my HP Photosmart 7960 to print the page numbers on a multi-page project?

How do I get my HP Photosmart 7960 to print the page numbers when printing a multi-page project?

Hi,
This has most likely nothing to do with the printer but with the program you are using to print. For example Word has a setting for this, so let me know which program and I might be able to check for you.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Multi track project shows audio track 1 & not 2 need help!!!!

hello everyone... Have a sequence in fcp 1 video track 2 audio tracks i right mouse click the sequence go to send to click on multi track project it sends to soundtrack pro but only track 1

This would frustrate me in the beginning and sometimes it will come back to me. I'll blame that on the Pro tools I have installed. Make sure that device is enabled in controll panel, hardware. Disable the ones you don't use. I don't think AA will recognize usb or firewire hardware if that is what you have. Needs to be a card. I use the M-Audio Delta L1010. 8 inputs. I use 8 direct outs from my mixing board into the 8 inputs on the card. Sounds very good for the price.
Good luck.
Donnie

Help: Multi-SCO Project - Module does not update after reupload.

hi, I created 4 courses in captivate 4 and repackaged them using the multi-sco projezct function in captivate 4. I uploaded the zip file on our LMS and then the developer went ahead to select assemble courses from lms to add two quizzes (not created with captivate) to make another course. Developer selects from a list of courses including ones from the multi-sco project. However when i went to update the Multi-sco files (since they were in capt 4 and now i update it with captivate 5 version), only 3 of the files are updating, one of the modules refuses to update itself. However, when i looked at the multi-sco project i uploaded on the lms it is updated all four courses, but in the new assembled course one of the modules refuses to update. I have tried updating all the files on the lms with the same name as tha particular course but it still doesnt work.
Does anyone have any idea what is going on. And how i can fix it?

yep same problem here
i had this problem and got a replacement handset.
i have had to do an update and got the same issue yet again.
The funny thing is, is when i got my new handset i had to run the email setup application and it worked fine.
now its failed and i have to boot in safe mode and wipe etc.
Will someone sort this out???!! O2, Blackberry whoever. Shambles!

Eclipse maven multi module project issues

Most developers I know moved on to IntelliJ for just one reason: better support for development and reload/hot deployment of multi module maven projects and its resources. All of these problems keep happening in the case of nested/hierarchical multi module maven projects which is >90% of maven use cases:
1. Every time a multi module project is imported, sometimes there are both referenced libraries and maven dependencies in some projects. We have to manually remove referenced libraries from appearing. How can stop this from happening?
2. Changes made to resource updates are not always refreshed and require full clean, using eclipse:clean eclipse:eclipse commands and even a maven project refresh using Alt+F5? Why should we do this and not let Eclipse figure out what's wrong? Also, Eclipse updates to dependency projects are slow when fixing any compile time issues from dependencies.
3. Maven sometimes import dependency projects and its resources into its classpath and sometimes imports final artifact or jar from local repository as its dependency. This is a major problem just because jars excludes specific resources, say, from its src/main/resources. Is there a way in Maven to ask it to use resources of final artifact or exclude files that are not part of the its dependency packaging, typically excluded in the the dependent pom by <exclude>resource... without manually updating classpath?
4. When deploying a multi module project to an Eclipse Tomcat container, resources are not deployed randomly. Say a dependency src/main/resources has dep1-config.xml and you want to specify a custom file dep1-config.xml runtime, there is currently no way to say override from the main project being deployed or from custom folders added to classpath of project being deployed. Guess this is a problem with the container classloader and not really a maven issue.
5. There isn't a single multi module project deployment tutorial with best practices of managing classpath resources anywhere.
How hard is it to make a stable maven support just like IntelliJ?

Please do not use the maven-eclipse-plugin (mvn.eclipse:eclipse) and m2e simultaneously, they're not very compatible. Instead, when issues happen, clean your project in the m2e way, using the "Maven > Update configuration" context menus on your project(s).

Making a multi layered project.

I am trying to make a project that will contain videos and such to help people use a program. I am wondering if it will be best to make each topic into its own project or all in the same captivate project. There will be many topics once I get going so my concern is the file will be quite large if all in the same project, but it will be easier to link from one to the other (for example i have a video and the word model comes up, i need the user to be able to click the word 'model' to go to another project stating what a model is). Or would it be better to link the projects externally, and not be able to have the 'back' function.. etc.
Please help!

Sorry, isn't this a double posting? I read exactly the same as in this thread: http://forums.adobe.com/message/5895738#5895738
Not very nice... we are all users, offering some free time. And you cannot expect to have an answer immediately.

How to add newly imported audio - as a new storyline/angle to existing multi cam Project??

I have a 6 camera multi cam Music Video Project I have been working on in depth for 5 days. The "band" has sent me a new & improved .wav file to replace the audio I have been working with on one "song". I have imported it into the event, cannot figure out how to add it as a new angle (that I will manually sync on the timeline) and then make it the active audio monitor angle. I see ways to "connect it" but not how to have it appear in the 6up display & on its own story/time line in the precision editor. This is like reinventing the wheel. I am losing mu mind. Please help?
Thanks

Man oh man. I need to take a break & eat somthing, how embarassing. I swear I knew that but had an attack of hysterical blindness or... the disclose arrow>add new... Thank You Tom for your quick & thouriough reply. Have a swell holiday.

Guys please help I was making a video project on I movie then I uploaded it to itunes then I deleted the app and re downloaded it is there a way to retrieve the project ( I still have the videos and photos)

Hey guys I am currently making a video of 1 second per day I started on January 1st till yesterday that's a long project
On my ipad in the application iMovie, yesterday I tapped on that box on top right with an arrow pointing upward, then selected save to itunes. After that I deleted the application and re downloaded the update. And I can't find the project and when I tap import from itunes I find nothing, is there a way to retrieve that project? Considering that I have the videos and photos stored on the ipad, only the project is missing

Did you fail to transfer all purchases to your compter before updating?

Help with multi track project

Hi all,
So I recorded my church's worship and sermon on GB through the local sound system. We upload the sermons onto the church's website, and use the worship recordings for practice. I muted all but the one version of the sermon I wanted and saved, clicked Send to itunes, and waited. The itunes version ended up having all six tracks (3 sermons and 3 worship sessions) overlayed, making things incomprehensible. I went back to GB and reopened the project to find that only the first track (worship session 1) had any "fuzzy lines" (i.e sound waves) on it, and it was all of the tracks overlayed again. The other 5 tracks were just flat lines that had no sound. I am at a loss on what to do. Any suggestions?

Before muting Tracks and exporting to iTunes did you have the waveform on all Tracks and did each Track contain a discrete sermon?
(Usually I solo the one Track instead of muting the others, but that really shouldn't make a difference.)
After saving I suppose you didn't somehow un-mute the Tracks? When you went back to the Project were the Tracks still muted?
And you say you went back to GB and "reopened the Project." Why did you close it at all? (maybe a silly question but I'm spit-balling here.)

Making multi-angles projects

Similar Messages

Maybe you are looking for