Making One Object Move, both players see it fine, but very slow.
Hi there,
I am simply trying to send one object (movieClip) move from the left side of the stage to the right side. I am able to accomplish this by using the following very simple code:
/////////////////////////////CODE///////////////////////////////////////////////////////// ///////////////////////////////////////////////////////////////////
//PRESSING RIGHT, MAKING BOX MOVE
public function pressingRightMakingBoxMove(e:KeyboardEvent) {
box.x += 3;
moveBox.sender = netGroup.convertPeerIDToGroupAddress(netConnection.nearID);
moveBox.user = "" + netConnection.nearID;
moveBox.xx = box.x;
netGroup.post(moveBox);
public function netStatus(event:NetStatusEvent) {
switch(event.info.code){
case "NetConnection.Connect.Success":
setupGroup();
break;
case "NetGroup.Posting.Notify":
receiveBoxMovement(event.info.message);
break;
public function receiveBoxMovement(moveBox:Object):void{
box.x = moveBox.xx;
////////////////////////////////////////////////////////////////////////////////////////// ENDCODE//////////////////////////////////////////////////////////////
It works fine, the box moves on both screens, but you can obviously tell there is latency. Should I be sending movements through an Object? Perhaps there is a quicker way, sending it through strings or text? Definitely not acceptable over UDP.
Thank you
NetGroup.post() may have significant latency, and postings may arrive in a different order than they are made. it is not intended for time-critical communication.
to get the lowest latency (and most efficient transmission) for N:N communication (including 1:1), you should use the 1:1 P2P APIs (NetStream.DIRECT_CONNECTIONS and explicit peerIDs) and be sure NetStream.bufferTime=0. it sounds like this is the most appropriate for your application.
for 1:N or M:N (M << N, N > 4) communication, you should use P2P multicast. but P2P multicast may also have significant delays, especially while starting up.
Similar Messages
-
Hp 8600 All in one printer problem with scanning through wired network its very slow!
Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I have a Mac OS 10.6.7 that will not activate the scanner portion of an HP C7280 All in One - prints fine - but won't activate scanner.
I have the same problem with an HP Scanjet 8250 and my Epson Stylus NX400. I have reloaded allegedly updated drivers. I have researched using SANE. Neither scanner wants to work since the OS X10.6 update. I have found very little out there about this problem.
Can anyone help me make these bricks work? Really would like a solution that won't cost me hundreds to replace the equipment. Thanks so much. -
Hi there, I have been trying to burn a movie I created in iDVD. When in the "creating your DVD" it is VERY slow saying it will take over 6 hours to burn the movie. I have never had this problem before. It also won't let me minimize the screen, I just get the beeping noise that something is wrong, but no pop up window telling me what to do. Does that make sense? Also the black & orange burn wheel is spinning VERY slowly and will often just stop. Any help would be much appreciated. Thank you!
Hi
When iDVD goes slow to ridiculously slow - it usually depends on - low free space on Start-up hard disk
• I set for a minimum of 25Gb free space
• 10Gb might work but slow
• 5Gb - slow and un-stable - DVD usually doesn't play
• <1Gb - iDVD might not even start and even so Mac OS runs into problems.
Else
Not knowing the origin to Your problem - General approach when in trouble is as follows.
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
*com.apple.iDVD.plist*
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W -
Making an Object Move (Smoothly) in AS3
Hi again, I think I might of already posted this, but the forums are loading at about 400k a sec so I don't feel like wwasting another 25 minutes just look through the first page of threads or my history.
I have an object that I want to smoothly move along the x axis when the user clicks on the screen. I first made a prototype that would make the ball end at a location I specified by doing x = 450;. I then tried looping ball1.x += 1 with a for/do (I encapsulated it with a boolean so the if ball1.x got to 450 it would stop) statement and I couldn't see the ball transition, I just saw it stop at the 450 mark. Anyone know how to do this? I know you do because I've seen you it.
BTW, the reason I didn't just do a motion tween was because I have it set up so you can move it along the y axis by moving the mouse. Thanks in advance.You can find all of the information about the Tween class in the help documentation.
Here's a line copied from the Tween constructor section.
public function Tween(obj:Object, prop:String, func:Function, begin:Number, finish:Number, duration:Number, useSeconds:Boolean = false)
Parameters
obj:Object — Object that the Tween targets.
prop:String — Name of the property (obj parameter value) that will be affected.
func:Function — Name of the easing function to use.
begin:Number — Starting value of the prop parameter.
finish:Number — A number indicating the ending value of prop parameter (the target object property to be tweened).
duration:Number — Length of time of the motion; set to infinity if negative or omitted.
useSeconds:Boolean (default = false) — A flag specifying whether to use seconds instead of frames. The function uses seconds if true or frames in relation to the value specified in the duration parameter if false. -
Flash is the problem. It often maxes both cores of my dual core processor and brings processing virtually to a halt.
Originally, I killed flash in Task Manager whenever i heard my fan come on and also noticed slow system response. This was very distracting and took a lot of time.
Then I installed FlashBlock, but it doesn't stop Flash unless you tell it for each and every website.
When reading news, and opening a link, I will hear the fan start, so i click the block button/icon in Firefox to block the site from using flash. Some sites don't launch with the FlashBlock icon. I have to use the manual kill option for them. This extremely frustrating. I understand why Steve Jobs hated Flash.
I don't like Apple's money-sucking wallet-leach behavior, so I use WinTel and live with the frustrations of which this is the biggest. HTML5 supposedly is the solution, but site builders use flash.
FireFox needs a flash control switch built in the browser to give control of Flash - block/ask, etc. functionality.By the way, Firefox does have a Click-to-Play feature you can use for Flash. That will delay Flash from starting on a page until you approve it. However, the approval is per site, I believe, so you may need an add-on to control it per page.
To set "Ask to Activate", open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
When you visit a site that wants to use the Flash, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.
Not a solution, but hopefully will help a bit. -
Hi,
No audio on very popular games since IOS 6 Update on my ipad. Anyone else had same issue or a workaround?If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
It seems my machine does not like your ver4 and 3.6.16. I want the ver prior to 3.6.16. . Since the last 2 updates have not been able to use FF to browse or play Webkinz. It is way too slow. Following the install of 3.6.16 the Colorfultabs is not working and I can't fix it or adjust it because the Add-ons list/page freezes. I have removed/disabled several add-ons and extensions and nothing seems to help. If it were not for IE I would not be able to use my machine. I have 2.5 GB of memory and 30 percent plus of free space on my hard drive. I use Windows XP SP3 if that makes a difference. I don't think I need a lot of add-ons but need to know what I can remove. The feature to open FF without any add-ons is gone for some reason. Please give me back my simple smooth operating FF. Thank you.
I had all the dot nets in add/remove but discovered they were not installed. Got all up to date. Puter is 2005, I have all that U listed except Win7. I just don't know if I need that or not. Did U say that I need more than the 2.5 GB
memory that I have? Please tell me why Win7 is better than WinXP.
FF is running much better now but Webkinz accounts are still loading slower than in IE. I am wondering if maybe I should totally remove all of FF including customizations and personal info and start over fresh with a clean install of ver 4. I am still using ver 3.6.16. Is it possible that this is reason for Webkinz (a flash, java and Unity game) not loading good? Also, are there some of the Plug-ins that I can remove? What Audio players do I need? I have wmp, real player, aol media playback, realarcade, realjukebox, also is Zylom usable? Thank you so much for your help. -
Very Slow / Lag When Screen Moves...
Hi Guys,
I’m really a newbie when it comes to AS3 – so really a total newbie when it comes to using it to develop iPhone games/apps, but I have used AS2 for years now
I’ve been trying to do a simple test – Just use mouse events to move a screen around depending on what is pressed. No Characters/hittests/etc.
What I have created works great on my pc – very smooth, and even on the iphone, the controls work as expected – but the problem is how SLOW everything is running. Pressing the "UP" arrow - makes the screen move, but very SLOW and Jumpy.
I have tried using onkeyframe and using a timer – but both are very slow.
Typically when I made games in AS2 – the “level” would just be a single BIG movieclip – as shown in “Example A” – but this was very slow on the iphone, so I tried a tile based approach (“Example B”), which reuses the same movieclips, it just moves them and renames them – trying to cut memory usage down, only loading what is needed - but still its slow. The total size of the "level" is only about 3x bigger than the iphone visible screen.
I have made sure all variables are done correctly: var thisVar:int = 10; etc and have enabled cache as bitmap. I have replaced all vector graphics with jpegs, and followed the guide on how to optimize code for iphone development – but nothing seems to work, everything just lags as the screen moves/updates – but everything works great on my pc.
Can someone please explain what I am doing wrong? Is there a way to cache the whole map before the game loads? Which is the correct way to make an iphone game where the level is bigger than the default screen - tile based or a large level graphic.
Thanks so much for any help! I’ve been trying to get this simple test working for 3 days now – but documentation is limited at the moment.
Cheers!This should be better:
the function addPage() is what I used to test Bitmaps
import flash.display.Shape;
import flash.display.Sprite;;
Multitouch.inputMode = MultitouchInputMode.GESTURE;
var currentGalleryItem:Number = 1;
var totalGalleryItems:Number = 4;
var slideCounter:Number = 0;
var gallery_items:Sprite = new Sprite();
addChild(gallery_items);
addPages();
stage.addEventListener (TransformGestureEvent.GESTURE_SWIPE, fl_SwipeToGoToNextPreviousFrame);
// create pages
function addPages():void
addShape(0, 0, 0xff0000);
addShape(768, 0, 0x00ff00);
addShape(1536, 0, 0x0000ff);
function addPage(xPos:Number, yPos:Number):void
var p:Bitmap = new Bitmap(new bookPage());
p.x = xPos;
p.y = yPos;
gallery_items.addChild(p);
function addShape(xPos:Number, yPos:Number, col:uint):void
var s:Shape = new Shape();
s.graphics.beginFill(col);
s.graphics.drawRect(xPos, yPos, 768, 1028);
s.graphics.endFill();
gallery_items.addChild(s);
function fl_SwipeToGoToNextPreviousFrame(event:TransformGestureEvent):void
if(event.offsetX == 1)
if(currentGalleryItem > 1){
currentGalleryItem--;
slideRight();
else if(event.offsetX == -1)
if(currentGalleryItem < totalGalleryItems){
currentGalleryItem++;
slideLeft();
function slideLeft(){
gallery_items.addEventListener("enterFrame", moveGalleryLeft);
function slideRight(){
gallery_items.addEventListener("enterFrame", moveGalleryRight);
function moveGalleryLeft(evt:Event){
gallery_items.x -= 76.8;
slideCounter++;
if(slideCounter == 10){
gallery_items.removeEventListener("enterFrame", moveGalleryLeft);
slideCounter = 0;
function moveGalleryRight(evt:Event){
gallery_items.x += 76.8;
slideCounter++;
if(slideCounter == 10){
gallery_items.removeEventListener("enterFrame", moveGalleryRight);
slideCounter = 0; -
If one period is selected,Report is working fine, not for range of periods
Dear All,
i have a problem in nearly 3 reports of Finance
1) <b>Working Capital Requirement Report,</b>
if one period is selected, Report is working fine, but when range of periods is
given in selection screen, amount is showing wrong value.
2)<b>Balance_Sheet and 3) P&L_Statement report</b>Same problem
E.g Mar07 period will give the results for March08 period and Mar06 period will give the results for Mar07.
Ur valuable suggestion is rewarded.
Regards
venuHi,
check for your variable restrictions in the report key figures.
It will show up according to the rsctriction put there.
Try to verify the vlaues with the key figures and if they are amtching then you have some issues with the data loads.
But with your explanation it seems its just the you are looking at the wrong key figure( for actuals you are looking at previous year values)
Or you are using wrong restrcition values at the key figure level( indicators indicating prior values used for actual values).
Hope it helps
Thanks
Ajeet -
2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc, but it is enabled on pc so I can only use one at a time to watch movies from my computer
Both atv,s are on the same network, they are wirless and the computer can see them and they are named different.
what ever one i switch on first gets to stream from my computer and the other one asks for home sharing to be switched on, then if i switch both off and start the other one first it gets to stream and the other one which worked asks for home sharing to be turned on. i have hidden all functionality, netflix etc as these are for my 7yr old kids. -
How Would One Go About Making an Object Rotate to Face in Direction of Mouse?
I'm just a teenager who happens to have Flash as part of CS4 Production Premium, which I got as a gift. I don't have any training or previous experience in Flash, and have only just in the past few month been looking into what ActionScript is. I've just been fiddling with Flash in my spare time, just as something to do, and am working on making very basic computer games. Currently I am trying to make a very basic top-down shooter computer game. I've gotten it to where I can move the player (a circle with an arrow on the edge) in eight directions using the standard FPS movement keys (W,A,S,D) and make it move faster for a limited time by holding down the SHIFT key.
But now I've come to a standstill. I am trying to make the player rotate in the direction of the mouse cursor (made to look like crosshairs) so that the player can move in any of the eight directions and aim in any direction at the same time. I've searched the Internet for hours on end, looking for anything that might help, but not a single Web page section relates to this kind of thing. So now I'm giving up on searching for a help article, and am making one instead. Is there anyone that's successfully done this kind of thing before? Or at least someone who actually knows how to properly use ActionScript 3.0 and can figure it out themselves, then tell me what they did? (In the meantime, I've made it so that the player rotates and faces in the direction he is traveling in.)
I've attatched all the code that I've typed to make the game work, so that anyone can look at it and tell me if I'm doing something wrong already. I've only been learning ActionScript by figuring it out on my own as I go (watched a few videos I have on a disc too), and in the case of this game, I've just been making is up as I go, so to all of you people who actually know this stuff pretty well, this code is probably going to look nasty.I pasted it to the bottom of my code on the main timeline (correcting it for my use), but I get this message in the Compiler Errors window:
Warning: 1090: Migration issue: The onMouseMove event handler is not triggered automatically by Flash Player at run time in ActionScript 3.0. You must first register this handler for the event using addEventListener ( 'mouseMove', callback_handler).
So what do I do about that? (again, I'm just a beginner, so I don't know what any of this means)
(attached is a snapshot of the various objects refered to in the code. also the original code is attached to the original post. in case these help at all.) -
Beating my brains out: How do you move a 3DS object in order to see it?
Can someone plese explain this to me in nice detailed steps. I just can't seem to get it to work.
OK,
I can load (using the StarFire 3DS loader) 3ds images just fine like this:
Scene theScene = null;
Loader3DS loader = new Loader3DS();
theScene = loader.load("D:\\My3dsFile.3ds");
Some .3ds files I can see just fine. Others look like they need to be scaled/translated. I noticed this by creating a ScaleInterpolator and applying it to the root BranchGroup on one of the .3ds images I could not see like this:
TransformGroup objTrans = new TransformGroup( );
objTrans.setCapability( TransformGroup.ALLOW_TRANSFORM_WRITE );
Transform3D zAxis = new Transform3D( );
zAxis.set(new Vector3f(0.0f, 0.0f, 10.0f));
Alpha xAlpha = new Alpha( -1, //Loop
Alpha.DECREASING_ENABLE |
Alpha.INCREASING_ENABLE,
1000, //trigger time
1000, //phase delay duration
5000, //increasing alpha duration
1000, //increaing alpha ramp duration
1000, //alpha at one duration
1000, //decreasing alpha duration
2000, //decreasing alpha ramp duration
1000 ); //alpha at zero duration
ScaleInterpolator scale = new ScaleInterpolator(xAlpha,
objTrans,
zAxis,
-6.0f,
6.0f);
scale.setSchedulingBounds( getBoundingSphere( ) );
objTrans.addChild(scale);
bgRoot.addChild( objTrans );
objTrans.addChild(theScene.getSceneGroup()); //theScene = .3ds scene
Doing this, I can catch a glimpse of the .3ds image every now and then.
How in the world can you scale a scene and move it to the 0,0,0 position?
All I want to do is load a stinking .3ds image (any .3ds image) and be able to view it! I think if I could scale it and move it to 0, 0, 0 then I should be able to see them.
Please help.
Thanks.Have you tried to scale the object uniformly at creation, before putting it in a scenegraph? this way at runtime you don't need to worry about objects being to big at runtime...
for the uniform scale:
Transform3D transform = new Transform3D();
transform.setScale(0.02); //try different values here
3ds_object_transform_group.setTransform(transform);
Another thing you could do is to use a 3D modelling program (like 3DS)
and scale the object very very small..
I had the same problem before, hope this helps -
I see a line when an object moves fast
Ok, I shoot a Video with My CANON XHA1S AT: 1440 X 1080 30 fps, with the speed of 60. I created a new project as you can see in Capture Shot.
I don't know why, But I suddenly see a shakey - line when a hand or any object moves close to the camera. Inside my Timeline I Slowed Motion few Tracks to 32%, the rest is at normal speed, When I check the speed for other Tracks it shows 99.9 %.
Any answer please
Thanks
SimonTry rendering a small part (and exporting it) of your timeline and preview it. Is the line still there?
My experience now is that with the hacked Mercury, the preview is not always top notch but rendering is.
Are you using interlaced video (you seem to be)? If yes, and you are slowing down your footage the shutter speed you used will make a huge difference in your slows. Usually you want it to be double what you normally use. 60 would be the bare minimum. 250 would be great.
On my XH A1 (not your model) 120 works fine (increasing it to 250 would mean I have lots of light, like outdoors for example). BTW, try the 60i mode. It has *double* the frames, which is great for slows. -
html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support
Maybe you are looking for
-
How to delete spotlight data in macbook air ?
how to delete spotlight data in macbook air ?
-
Ipad keeps giving "no sim card" alert, why?
Hi there, I use my my iPad 2 without a sim card, only with Wifi. That's what I want. I have taken the sim card out. But: the iPad keeps giving me the alert "no sim card" every few minutes! I cannot play a game or browse because this alert window keep
-
How can I define same Price Conditions for two different Sales Deals ??
I need to define for the same price condition, lets say ZPMP, two different values or condition records, for two different sales deals and the same valid dates For example, Sales deal 1, ZPMP equal to USD 15 and valid dates from 04/15/08 to 04/30/08.
-
11.0.03 : Problems prints in color
Hello, I have an issue with the new Adobe Reader's version : 11.0.03. Indeed, users in my company can't print in color. No error message, the printer just print in black & white... This is a Canon IR-ADV C2025 For information, printers are connected
-
Nested Sliding Panel in an Accordion Panel
I have a nested Sliding Panel inside an Accordion Panel. The Sliding panel will show until the Accordion panel is completely closed then it abruptly hides itself. It does this only in IE of course. Not sure if a sliding panel can be properly nested i