Making Template Shifts page to right!

I have a site that I have done 3 pages for and I'm making them into templates but as soon as I put an editable region in the whole pages shifts right in Dreamweaver. It doesn't effect the look on the web but look bad in dreamweaver. I dont know if you can tell by the image but one whole DIV is off the side of the screen. I could probaly fix the div that is shifted off the page with my CSS but what is doing this. And can I fix the #Wrapper?
Forgot to add link to template. http://www.myradioclassics.com/Templates/ProductDiscription.dwt
Thanks

You have some errors in your code that DW may be choking on.
Run your page through the validator at http://www.validator.w3.org
One thing I know DW has hated in the past is comments with more than two hypens to start and close, so  should be -->.
If all of the errors are removed and Design View is still displaying it wrong, post back and we can take a closer look.
Keep in mind though, that there may not be a "fix" for Design View. DV is just an approximation of how the page will look, not even a good one at that. Live View is better, but only represents the page as it would look in a "mostly there" version of a Webkit browser. Previewing in the actual browers is often the only way to know what your page will actually look like.

Similar Messages

Using Page Breaks and Template Shifting

I'm working on a book. The book is in a word formate. I'm taking the text and porting it into InDesign with page after page being connected. There are 73 pages in total of pure copy once ported in. Now I'm going in and laying the media into the text. I have two basic master template designs that I use based on the content being talked about in the text. Example is Master Template A has a white background, and Master Template B which has a black background.
Since the book is alternating between templates depending on the content on the page the pages might look like this:
Page 1: Template A
Page 2: Template A
Page 3: Template B
Page 4: Template A
and so on. I have a question about page breaking. I'd like to always keep the content on page 3 on a master template B background.
However, if I add more content to A, or if I use a page break, the content on all subsequent pages gets pushed down (all pages are connected). So if I page break on Page 1, my content from page B gets pushed onto a template A background. This is obviously not what I wanted. Should there be another function besides page break that I should be using to put separaters? How can I make sure that my content on page 3 stays on a template B background?

Right now your text is threaded in one continuous story. When you add new text inthe middle, anything following that point is going to move. To prevent that you need to break the text into separate stories for eac type of content.
This is basically the same thing as dividing the chapters of a book so that each one starts onthe correct master page, which is didcussed at some length here: http://forums.adobe.com/message/3993405#3993405

Why is it when i pull up firefox, the whole page shifts to the right. i don't have this problem with internet explorer. please help

When I pull up firefox, the whole page shifts to the right of the screen and i lose about 40% of the page. This is very difficult when looking on Facebook or Yahoo for my mail. This does not happen when I pull up Internet Explorer. What Gives, please help

Unfortunately if you have downloaded Babylon toolbar this is probably the culprit. to fix this right click on the menu toolbar the the one with the file menu on it and un-check Babylon toolbar. This should fix the problem.

How to delete a template in pages, how to delete a template in pages

Have looked on forums... 1. Cannot find "Go" on finder menu. 2. No library found. 3 Cannot delete nor can I drag old templates into the trash.
My templates folder is pages is cluttered with old templates. Are they here forever? Or, can they be removed?

Simpler version of deleting templates using Pages:
Utilizing v. 5.5.2
Go to Pages and select New
Select My Templates
If you don't have the right click enabled on your trackpad, click control and select the template you want to delete which gives you the option to Rename or Delete the file.
Hope this helps

How to get a template from pages on to an email to send? (Not as attachment)

This question might have an obvious answer or not be possible at all, but I was wondering if it's possible to create a template in pages and then use that as an email template, so far all I've been able to do is attach the template as an attachment to an email, whereas I want the template to be the actual email. Any help would be appreciated? I hope I've made myself clear.

hi rohan,
u r right because we can pass variables with links in following format :
http://<domain>:<port>/<path>/page.htm?empid=123
and in this "page.htm" create a page attribute EMPID with AUTO ATTRIBUTE CHECKED .
now we can retrieve the value of empid .
similarly u can pass multiple variables with same link separated by "&" in following format :
http://<domain>:<port>/<path>/page.htm?empid=123&empname=anx&empdept=it .
and create corresponding page attributes in the same manner.
hope it will help u.
Regards,
Ankur

Adding a template style page in Pages 5

Can anyone help me please?
I have upgraded to Pages 5.0 and not only are there far fewer interesting templates for me to start working from (I am looking particularly in the Newsletters section) but I am also having a problem adding template styled pages to a new project.
Previously I simply clicked on Insert > Pages in the menu and then selected the layout. I can't seem to find how to do this in 5.0 - all I can do is create a blank section.
I'm sure I must be missing something really obvious but I can't figure out what it is!
Regards, Peter
PS is there any way to upgrade to Pages 5.0 but not lose the decent (interesting) templates? I'm a school teacher and the kids love having interesting templates to start with - these new ones are terrible!

The lack of page/section styles was one of the first features I noticed missing in Pages 5.0. This is really disappointing for me as I've created a number of my own document templates and have made extensive use of page/section styles.
On one hand I can understand why Apple may have removed this feature. It is rather an anomaly among its peers. Microsoft Word does not use page/section styles and to some users it could be a bit of a confusing feature in Pages. I know for me it was somewhat confusing at first. I was used to the MS Word way of doing things and I was wondering how these section style templates differed from me just setting my own section style. But then I figured out that it is like a slide template in Keynote. It is simply a template and can be used as a shortcut to setup a new document section in a standard style. Since figuring out how to use the page/section styles, it has been awesome and has been one of the key reasons I like Pages better than Word and why I switched completely from Word to Pages.
For now, I guess I will have to figure out how to work without it which will basically mean that I will have to go back to the old manual method of just copying and pasting section styles. It will take longer to add new sections with identical styles to a document and will be more buggy. It is likely that I will not always get it exactly correctly which will result in consistency issues in my documents. As well, the inability to copy and paste whole pages/sections from the page thumbnails will make this process take even longer and be even more buggy. But ultimately it is doable.
I can only hope that the page/section templates is a feature that Apple will bring back very soon. I wish someone from Apple would at least let us know if this feature will be making its way back in or if it is gone for good. Accordingly, we could move on or plan for its return.

Flash Video in template child pages

I have created templates with editable regions for my
websites. When I try to insert a Flash video file (.flv) it wants
to put code in the header region and body region. I have tried
erasing the editable areas, making the entire header an editable
area, making the entire site an editable area. I've tried looking
on Google and the Dreamweaver Developers section (there is a link
to an answer but the link is broken). I unfortunately only have
Dreamweaver 8. If this problem is fixed in CS3 I'd be happy to go
to Kinkos and rent a machine. Any suggestions?
Thanks!

Here's how you will have to manage this.
When you insert a Flash video on the page, several things
happen -
1. DW inserts a link to a javascript file in the head of the
page.
2. If you elect to check for Flash versions, DW inserts a
call to that
javascript in the <body> tag of the page.
3. DW then inserts a javascript call to the file (in #1) on
the page at the
location where the Flash is to appear.
In a Template child page -
1. The head region must have an editable region in it, so
that the link can
be inserted.
2. The Flash check call will fail to be written to the body
tag, since that
is LOCKED by the template.
3. The javascript will be written to the body of the page
where you
inserted the Flash.
Thus, 2 of the 3 elements should work fine.
My suggestion? Do it again, and do not select the check for
Flash version -
that should work for you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cybergrace" <[email protected]> wrote in
message
news:f9vjls$a9n$[email protected]..
>I have created templates with editable regions for my
websites. When I try
>to
> insert a Flash video file (.flv) it wants to put code in
the header region
> and
> body region. I have tried erasing the editable areas,
making the entire
> header
> an editable area, making the entire site an editable
area. I've tried
> looking
> on Google and the Dreamweaver Developers section (there
is a link to an
> answer
> but the link is broken). I unfortunately only have
Dreamweaver 8. If
> this
> problem is fixed in CS3 I'd be happy to go to Kinkos and
rent a machine.
> Any
> suggestions?
> Thanks!
>

Export to pdf...everything too small and shifted to the right

I've been using pages to work on a training manual. The online printer I am using requires pdf. When I export to pdf, the resulting document is shifted to the right and is smaller. I can't seem to find anything about how to make it look right. I've also tried print to pdf, change options there such as scale, scale to fit pages, etc. Nothing works!

I've had this the same problem in the past. What application are you using to view the PDF? When I use Preview it typically looks good, but when I use Acrobat, the font is smaller and doesn't look as good. There are two solutions I've tried for this. One, make sure the font you're using is an Adobe font; if it isn't, it may be render properly when using Acrobat to create the PDF. Two, increase the font size to a minimum of 14, and this might make it appear more accurately regardless of whether the font you're using in Pages is an Adobe font.
I've also had trouble with Google Chrome in sometimes shifting certain PDF's and only printing 3/4's of the document in a print out. I now use Safari to view/print my PDF and never have that problem.

Can some explain how to change the format on the modern resume template in pages. There is a large spacing on the second page that i will like to change

Can somone please help me --- Im trying to reconfigure the spacing on the second page on the Modern Resume Template on pages -- The first page is fine, the second page has a huge spacing before the text begins!!!!!! PLEASE HELP!!!
FIGURED IT OUT!!!!!

Only a guess since you do not tell us teh version - for iPhoto '11 click on the change theme button in the upper right - for different versions it is in different places
http://support.apple.com/kb/HT1850?viewlocale=en_US&locale=en_US
LN

Quarter fold card template for pages

I've just bought a mac mini and love it.
I'm still moving over from MS products to Apple and it's going pretty well apart from MS Publisher.
This still seems to be better at certain things than Pages.
One issue is the lack of templates for cards in particular.
Does anyone know where i can get hold of a quarter fold card template for Pages?
I did see one but it was for Pages 09 and version 5.5.2 doesn't seem to open it.

You can use a free Avery for MS Word Greeting Card. Click the Template Only (works with PC and Mac) radio button, and then download. Open in Pages v5.5.2, and first save as a Pages document in your Documents folder. Set the font, etc. to what you want in your Quarter-fold card template. Once you have done that, from the File menu, select Save as Template, and give it a name. While you are there, observe what a right-click on the template name presents in a pop-up menu.
When you open Pages without specifying a document, it will default to a Template Chooser. Your Quarter-fold template is parked in the User Templates category.
Pages v5.5.2 is not designed to compete as a true Desktop Publishing/Layout application. If you want to open Publisher documents on the Mac, get a free copy of LibreOffice, which will open them. Since it is not Publisher itself, your mileage will vary on layout accuracy. The LibreOffice PDF documentation is available, and created with LibreOffice. Since this is a superset, MS Office replacement package, there is a forms designer in the Writer application, and the ability to open PDF and edit them also exists. There is also complete Visio support from the first version to the latest.
When you first launch LibreOffice, you must click the open button in the initial dialog, and afterwards, a double-click will open it normally. This will be true for any Mac applications obtained outside the OS X App Store.

Need to repeat template in Pages

Need to do multiple pages of the same template in Pages. Template is set up with columns containing a graphic box to the left and a text box to the right. How do I add additional pages .. pg 2, pg 3 etc?

Welcome to Apple Discussions
Is this a template you've created? You can "capture" pages to reuse in your own templates, just like the built-in templates do. Try a search of Pages Help for Reusing Sections or see this user tip. It was written for Pages 1/iWork '05, but is more detailed that the Help description.

How do i create mailing labels for an avery template using pages

how do i create mailing labels for an avery template using pages.

mcc,
The first topic in the "More LIke This" box to the right of your question is a rather comprehensive address label printing discussion. Does it answer your question?
Jerry

Recipe template for pages

I want to add an existing recipe template to Pages 08, I've read the support community and downloaded suggestions,but when I try to open it states these are not pages and it will not open. Do I have to create a template from scratch or is there something out there already that I can plug in and begin using?
s

I just download a recipe book template for pages '09 that just opened right up.
The link:
http://blog.magcloud.com/2010/11/11/pages-recipe-book/
Actual template:
Open a New File
You can DOWNLOAD the template I use in my demo here, the Pages 2008 version here,
or if you are feeling inspired, design your own from scratch!

Can't make comments editable on template child pages

Is there a way to make comments editable on template child pages. When making editable regions, comments are not included. I need to make comments editable on child pages. How do I do this.
Thank you,
Jim

Open your Template.dwt file. Add an editable region around your comments section.

<p>Comments go inside here...</p>
<p>Comments go inside here...</p>

Save your template. Allow DW to update your child pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Problem inserting FLV into template based page DW8

Error when inserting an FLV into a template based page.
The error is: "Making this change would require changing code
that is locked by a template or translator. The change will be
discarded."
I thought perhaps something was wrong with my code so I
created a new page in DW8, with one word of text. Saved the new
page as a template with the one word of text made into an editable
region. Created a page based on that template and attempted to
insert a FLV file into the editable region (using Insert > Media
> Flash Video). I still get the error message. I've attached the
code for this page.
I also get the error message when I go through the tutorial
Presenting
Video with the Flash Video Component in Dreamweaver 8. Using
the files provided in the tutorial.
Is the only workaround for this the one I found here?:
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
Steps are under heading "Workaround for Locked Code insert error"
near bottom of page.
Any help is appreciated.
Jen

> Is the only workaround for this the one I found here?:
>
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
> Steps
> are under heading "Workaround for Locked Code insert
error" near bottom
> of
> page.
This workaround *will* work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kilmeny21" <[email protected]> wrote in
message
news:[email protected]...
> Error when inserting an FLV into a template based page.
>
> The error is: "Making this change would require changing
code that is
> locked
> by a template or translator. The change will be
discarded."
>
> I thought perhaps something was wrong with my code so I
created a new page
> in
> DW8, with one word of text. Saved the new page as a
template with the one
> word
> of text made into an editable region. Created a page
based on that
> template and
> attempted to insert a FLV file into the editable region
(using Insert >
> Media >
> Flash Video). I still get the error message. I've
attached the code for
> this
> page.
>
> I also get the error message when I go through the
tutorial
>
http://www.adobe.com/devnet/flash/articles/flv_tutorial.html.
Using the
> files
> provided in the tutorial.
>
> Is the only workaround for this the one I found here?:
>
http://med.stanford.edu/irt/web/references/flash_video_installation.html.
> Steps
> are under heading "Workaround for Locked Code insert
error" near bottom
> of
> page.
>
> Any help is appreciated.
> Jen
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> 
> <title>Untitled Document</title>
> 
> 
> </head>
>
> <body>
> Text
> </body>
> </html>
>

Making Template Shifts page to right!

Similar Messages

Maybe you are looking for