Manage three different Levels of iOS?

Well, I now have three devices, all maxed out at different levels of iOS. Old iPad is two updates behind and maxed, I discovered that my old iPod Touch won't update to iOS7, so it's maxed, and my iPhone 5 updated normally. So... how do I juggle what apps will run on what device? They all updated automatically so I now have 11 (11 apps!) the only work on one device. Clearly I need to keep downgraded copies of them to run on my other devices. Actually, TWO copies, since I have 3 devices at three levels.
BTW, all these devices are functional and good, so no 'buy new' suggestions. Also it's not reasonable that I drive them from one computer, so please no "buy two more computers" suggestions. Thanks.

AlexArod:
Welcome to the Apple Discussions.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
Do you Twango?

Similar Messages

Performance Management in three Different Languages

Hello Gurus,
My client wants to implement Performance appraisals in three different languages, English, German and Japanies. As for as I know we can set blank in JCO language setting so employees in German and Japan can use their own languages. What else I need to be aware of? Please advice.
Regards
Francis.

these language should be available ! What you can do is login as the german user and verify if they get in german or not
Note that languages are picked from users portal settings or browser, read the note
First of all, please distinguish between template name and document
name.What you see in T:cd PHAP_ADMIN is appraisal document name, once it
will be created it will be defaulted by the template name of the
current logon language (see BADI 'HRHAP00_DOC_DEF_DN') This means that
in general you'll see the template name as the document name. But
changes/translating template names won't have any effect to the shown
document name.
Documents are user/appraise specific and therefore each document could
have its own document name which can be changed e.g. via PHAP_ADMIN,
but it could not translated automatically, this is our standard design
which has been confirmed with our development team.
For a more automatic way for getting the translated template names as
documents names you may use the SAVE-BAdI 'HRHAP00_DOC_SAVE'. Within
this BAdI you could read the different translations of your template and
write them all except of the logon-language into the HRHAP_T (table with
names of the document) if mode='N' (New/Create document). So next time
you login in a different language the system will find the corresponding
document (template) name in the right language.

Batch Management in different plants

Hey SAPers
I am using batch managment for certain materials. But I don't need batch management of same materials in other plant. SAP is not allowing to change the status in other plants.
Business needs to maintain materials in batches in warehouse but not in stores.
Do we have a way out for this problem.
Please respond.
Thanks.
Regards,
MAM.

dear abdul
You can manage batches in different plants for many materials. For this reason, batches must be uniquely identifiable. In the SAP System, the batch number uniquely identifies the batch. You use the batch level to specify whether the batch number for a material is unique in one plant, or in all plants.
You choose the batch level in Customizing for Batch Management under Specify Batch Level and Activate Status Management
Batch Levels
Plant level
The batch number is unique in connection with the plant and material.
The batch number is only known in the plant in which it was created if the stock is transferred to another plant, the batch is unknown in the recipient plant and the system does not adopt any data. You have to recreate and specify the batch in the receiving plant; that is, the same batch number may have different specifications in several plants.
Material level:
The batch number is unique in all plants in connection with the material.
The same batch number has the same meaning for the material in all plants. One batch number cannot have different specifications in different plants. During stock transfer to another plant, the specification of the batch is known in the destination plant even if the batch is placed into storage in that plant for the first time.
Client level:
The batch number is unique in the whole client. A batch number can only be assigned once in the client. You cannot assign the same batch number for different materials.
The batch number is only unique at the chosen level.
Changing the Batch Level
In the standard SAP System, the plant level is set as the batch level. If you want to use a different level in your company, you have to change it in Customizing and carry out a conversion program.
You choose the batch level in Customizing for Batch Management under Specify Batch Level and Activate Status Management.
While the conversion program is running, you can only post batches at the old level. You can only post batches at the new level after the conversion has been completed.
You cannot change back from a higher level to plant level in the standard system. However, you can change the batch level from client level back to material level.
To change the batch level from plant level to material level, the material has to be subject to batch management in all plants.
This will help you for config setting:
Logistics general - Batch Management
1.1. Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
1.2. Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
1.3. Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
1.4. Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
1.5. Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
1.6. Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
1.7. Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
1.8. Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
1.9. Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
1.10. Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
1.11. Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
1.12. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
1.13. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
1.14. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
1.15. Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
1.16. Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
1.17. Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
1.18. Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
1.19. Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
1.20. Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
1.21. Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
reward points if helpful
thanks and regards
ravikant dewangan

OBIEE Facts at different levels.

Hi,
I am bringing columns from three tables: Two facts and one Dimension table to create a OBIEE Report.
The fact tables Workforce Event Fact and Employee Daily Snap Fact are at different levels, but both of them have proper joins with Dimension Employee Dim.
When i am pulling columns from D1 and any one of these two facts, i am not facing any problem in seeing results. But when i bring columns from all of these three tables, i am getting this error,
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Workforce Event Fact) does not contain mapping for [Employee Daily Snap Fact.Exempt Indicator]. (HY000)
Is there anything i have to do in Business Model layer to avoid this error. Many people suggesting to assign an aggregation level for these two facts. But i am not having any Dimensional Hierarchy defined.
Thanks
Swami

Hi swami,
Many people suggesting to assign an aggregation level for these two factsThis is a workaround i think where you need to create aggregate tables(not levels) and then use them for your purpose.(OR) you dint define the logical source table properly either correct it.
Another work around i could suggest is,take the 2 fact tables columns needed into one alias table and make it as fact and join this fact table to dimension table and you can get all columns.
Hope it helps you.
Best Wishes,
Kranthi.

With three different objects in one Section with in one report is it possible?

Hi my dear friends, Good morning
I'm using BO 4.1 sp 6
I needed some help from you could you please .........
here is that table contains ....
Date         Batch NO   Customer account No   amount of check     amount
01/01/04    5678           123456                         $300                    $ 500
This report contains three different structures based up on user selection Section
system Name , Batch NO, Company code Used in Section
query filters and column are same for all above three structures in query filters all are optional prompts
currently i've created three tabs for three structures but due to optional prompts based upon selection data is fetching for all three tabs ...
is it possible to restrict ?
can i merge these three tabs into one tab ?
query filters are          user selection for System name in Section
class name                     class name :suspense
class type                       Date :
system name :           User selection for Company Code in Section
Date :                              Class Name : Suspense , Class Type : Rejected , System name : Mars , Date :
Company code :          User selection for Batch No In Section
                                 Class Name : Suspense , Class Type : Rejected , System name : Mars , Date :
End user front end application is Java
Thanks
Ravi Kumar

hi friends,
Hi hesters thanks for your help it is helpful but my requirement is not met with that.
i've got answer
create condition @ universe level
with
'System Name'= @Prompt("Subtotal By','A',{'system Name','Batch No','Company Code'},mono,Persistent,)
need to create for what are the objects we are using in section
and create userresponse @ report level
if(Userresponse("Subtotal By") then [System Name] ......
you will get it...........

Extract Data in Power Pivot from MDX with diffrentnt different Level of Hierarchy in MDX

Hi All,
My requirement is to extract the data form tabular model and put in power pivot,as all the measures calculation is present in model just extracting the aggregated data.
Issue is appearing on Rolling up the data, so is there any way to extract the data so that it will display the right data on different level. As per the below example on level 2 data is getting summed up which is not correct.
Ex:-
Level1
A
10%
B
20%
Level2
30%
Thanks Chandan

Hi Chandan,
According to your description, you create a SQL Server Analysis Services Tabular model and extract Data in Power Pivot from MDX, the problem is that the hierarchy data rolling up base on the hierarchy level, right?
I have tested it on my local environment, we cannot reproduce this issue. So as per my understanding, the issue can be cause by the hierarchy setting in your tabular model. Here are some links about how to create and manage hierarchies in a tabular model,
please refer to the links and check if the settings are correct.
http://msdn.microsoft.com/en-in/library/hh213003.aspx
http://www.youtube.com/watch?v=qKKNY1Vj_2c
If the issue persists, please provide us more information about you hierarchy creation steps, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Why is DPM 2012 R2 splitting this Co-located Protection Group Set across three different tapes?

I have 10 protection groups that ran Saturday night. I have put information about them in the following table:
I extracted the data in the table using Get-DPMProtectionGroup CmdLet and the job information from the Monitoring page of the DPM admin console. As you can see from the tape barcode, DPM wrote the first four PGs to one tape, then started a second
tape, and finally failed when starting a third because it had run out of free tapes.
All of the protection groups are assigned to the same "Co-Located Protection Group Set" in the "Tape Optimization Setup" dialog box.
Prior to the jobs running, I painstakingly ensured that each of the Protection Group's "Select Long-Term Goals" and "Select Library and Tape Details" screens are identical as follows:
Prior to running the jobs I had already disabled autoclean on the tape library.
I have checked to see if the tape drive is reporting IO error 0x8007045D using the method described in this blog post:
http://blogs.technet.com/b/dpm/archive/2012/05/14/things-you-can-do-to-help-data-protection-manager-utilize-your-tapes-full-capacity.aspx
There seems to be no mention of 0x8007045D or -2147023779 in any of the MSDPM*.Errlog files.
These are LTO6 tapes with a capacity of 2.5 TB each. The total data for all the jobs put together is less than 300GB.
Why is DPM 2012 R2 splitting these protection groups across three different tapes?
What else should I check for that might cause DPM to start a new tape?

Hi Mike,
Thanks for taking a look at the logs. I just wanted to point out that there were actually two changes made just before collocation succeeded:
Write Period and Expiry Tolerance were increase
Full Verbose logging was enabled
This technet article states that Full Verbose logging affects performance. If the problem with collocation is caused by a race condition then it is
possible that enabling logging actually caused collocation to succeed. At this point there doesn’t seem to be any evidence pointing to which of the two changes resulted in collocation succeeding.
I propose I run the following tests to differentiate the two:
Test #1 - Collocation Confirmation
Repeat last weekend's test to confirm that successful collocation wasn't an anomaly. Configuration:
full verbose logging: Enabled
Expiry Tolerance: 1 year
Write Period: 1 year
Test #2 - Logging Only
Test to see whether enabling Full Verbose logging enabled collocation to succeed. Configuration:
full verbose logging: Enabled
Expiry Tolerance: 7 days
Write Period: 6 day
Thanks for your help,
Alex

Multiple different level accounts in iPads?

Hello.
Is there a way to set different level accounts on a single Apple iPad Air with the (lat/new)est iOS v8.1.3?
Thank you in advance.

It's not possible. The iPad was originally meant to be a single user portable portal to iTunes. So there's no support for separate logins or user access levels.
Say you have 3 users for an iPad, you can make separate folders and put each person's apps in a folder (there is the limit in that you can only have one copy of an app on the iPad_...so let's say it's like my sister who puts my niece's games in her folder. But there's nothing that restricts my niece from accessing mommy or daddy's apps beyond telling and teaching her 'no, don't do that'
Apple's work flow is that each person has their own iPad or is open in their sharing if they share it with others.

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

Fader Selection - Different Levels and Not Smooth

During a mix I will select all the tracks to turn down all audio/midi channels to lower their volumes. When this is done some of the track will drop to different level and slowly catch up with the channel that I am moving. In Pro Tools when this is done they move smoothly and everything stays at the same level. Is there a way to prevent this from happening in Logic 7.1?

Well, that's the code that was written automatically by coldfusion when I've chosen to create user authorisation. However when you choose to go this way coldfusion asks whether you want to authorise user by username and password only, or add permission levels. So I've chosen to authorise by all three. As mentioned in database I have added three fields: username, password and user_type. Currently I have two users. One's - admin1, and another - admin2. If I change both to admin1 - have no trouble loging in. But if second one is left as admin2, it denies access with no error.
My intentions are to separate content of the admin page with the following code:
<cfif ListContains("admin1", Session.MM_UserAuthorization)>
Content to show if user in proper access level which is Admin1.
</cfif>
but in order to achieve this I have to login users with different access level.

Identifying three different colors within a single image

Hello everyone,
I recently begun a project which requires me to process the image from a USB camera, and could use some assistance.
Once I get the image I need to determine the center of mass for three different colors within this image. Although this seems to be a relatively straight forward task I ran into a roadblock right off the back.
This roadblock relates to how to properly isolate each of the colors from the image without using too much memory. My original structure had the USB image coming in, and then I would process that image for the three different colors. Unfortunately, this required using a total of four instances of IMAQ create. (One for the acquisition, and three for all of the color threshold images). Although this works it seems a bit inefficient. Allocating memory for 4 RGB U32 images uses a lot of memory!
Visual snippet attached below for aiding explanation
So in a nut shell, I’m wondering if there is any way to improve this, and decrease memory usage. My First thought was to only use two IMAQ create (one for acquisition and one for processing) then, iteratively (for loop, or something of that nature) run the processing image through a processing loop with different threshold parameters for each iteration. My worry is that this will significantly add to the latency of my program.
Are there any others ways to do this that I am missing, or am I on the right track? If you have any suggestions they would be much appreciated.
Thanks,
Taylor S. Amarel
Learning is living.
Co-Founder and CEO of http://3dprintingmodel.com/
"If we did all the things we are capable of, we would literally astound ourselves."
-Thomas Edison
Attachments:
Image Processing.png ‏77 KB

Patrick,
The example you linked does have some characteristics of the system I wish to create. Unfortunately the example does not go into much detail about "labeling particles" by their color value. I have a strong understanding of how image particle analysis works. But fall short when is comes to the most efficient way of doing this. This is more of a optimization question, rather than a image analysis query.
Here is an explanation of what I'm trying to do.
In plain English, I want to input an image and find the center of mass of three color, or color ranges.
Suppose I had this image;
And I want to calculate the center of mass for the Red, Green, and Blue disks. I also need to differentiate the different center of masses. Red_Center(x,y), Green_Center(x,y), Blue_Center(x,y). In a nutshell, Input Image >> Output Three Coordinates.
What I'm trying to figure out is the quickest and most effective way of calculating these values with minimum memory usage. As stated earlier if I process the image for Red, Green, and Blue centers in parallel it would require allocating an image location for each color. This would cause an enormous memory overhead. (1600 X 1200 X 32 bit X 3) Far too much!!!
So I'm looking at a way of accomplishing this without stretching my memory resources dry. I thought that if I put the processing in a For Loop and input an array of Threshold values. (Red, Blue, Green), (1D X 3) then it would process Red, and begin autoindexing the centers. Then it would it would iterate again and process Blue, and likewise index the centers of mass...
Is this the right way to do that, I am a self taught LabVIEW enthusiast so I do not have much experience when it come to building complex applications that require explicit memory management.
Thanks,
Taylor S. Amarel
Learning is living.
Co-Founder and CEO of http://3dprintingmodel.com/
"If we did all the things we are capable of, we would literally astound ourselves."
-Thomas Edison

Why do we install Solution Manager on Different Server

Hi Everybody,
Please if anybody can help in clearing the doubt that why it is advisable to install Solution Manager on Different Server.
Thanks in advance!!
Pawan

Thanks Juan. Got the answer.
Infact i was reading somewhere and got these points -
SAP Solution Manager is designed to run in a central u2018monitoringu2019 system at the customer site where all other SAP systems and mySAP solutions (satellite systems) are connected:
u2022 The entire Solution Landscape can be documented (u2018living documentu2019) in a central system (in fact several Solution Landscapes can be managed)
u2022 SAP and Non-SAP Systems can be modeled
u2022 All core business processes can be graphically assigned to all available productive systems in a solution landscape
u2022 All connected SAP systems can be monitored by the central SAP Solution Manager system
u2022 Satellite systems submit data via RFC / agents into the central system
u2022 The system with the SAP Solution Manager installed has a connection to SAPNet R/3 Frontend and the SAP Service Marketplace to communicate with SAP Support Back Office
The SAP Solution Manager serves as a platform that includes several features in one application. The strength of the SAP Solution Manager is the strong integration into the mySAP.com Solution and the optimal knowledge transfer SAP-Partner-Customer including central monitoring features, mainly focusing on core business processes. However, additional features and tools (Support Desk, SAP Note Assistant, MS NetMeeting,u2026) that are integrated in the SAP Solution Manager, also play important roles within a customeru2019s solution management.
It is important to understand that it is not necessary or useful to always have all integrated SAP Solution Manager components installed on one system. For example it is possible to install the SAP Solution Manager on one system and connect to another System where the Support Desk is installed. The SAP Solution Manager then only serves as a portal to jump to the included Support Desk system without notice.
If the customeru2018s main focus is the management of core business processes through service roadmaps and monitoring via SAP EarlyWatch Alert, Service Level Management (reporting) and so on, SAP recommends the SAP Web Application Server as the best choice for the SAP Solution Manager installation as it is also the platform for the SAP Solution Architect and has fairly small hardware requirements.

Mixed Manufacturing Strategies at Different Levels in BOM

Dear colleagues,
We have a situation where the BOM is about 5 levels deep. At the top level, the business needs a MTO type of solution. At the semifinished level i.e the assemblies need to be made after the receipt of sales order. Therefore, we can call the assembly level as either Assemble to order or Make to Order. However at subassembly level, forecasts are likely to be keyed in. Therefore, this is a make to stock.
We have some solutions that we have thought about so far.
1) I would like to hear if any of you have implemented multiple strategies within a single BOM structure and what challenges / issues you may have faced?
2) I would like to know if any you came across a situation where MTO production order in one level of BOM drives another MTO production order in another level?
3) What is the best way to manage and establish a hard pegging between different levels of BOM in R3? ( I know that this is easier in APO)
regards,
Pavan

We have implemented following scenario.
1st level - FERT - MTO strategy - type 20
2nd level - HALB - No strategy
3rd level - ROH/VERP - No strategy

Display different level for same hierarchy value in BO 4.0

Hi Expert,
I have one question for Webi for BO 4.0
We have one hierarchy in BW side and we hope to display differet level in same report for different column
For example, column A is for level 6. column B is for level 7.
Do you know how to releaze this in Webi side?
In the 3.X version, we have different dimension for different level.
But now in BO 4, it has been combined into one\
Thanks and best regards
Alex yang

Hi,
You can still do this in BI 4.0, if you use the old 'legacy' MDX OLAP.unv from Universe Designer tool .
Yes, with the BICS connection, you are getting a native hierarchy, as it would be displayed in an OLAP environment.
Cheers,
H

OBIEE report from multiple facts at different levels

Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
Thanks in advance.

Hi Vinod,
The scenario provided in the link above doesnt match to my issue.
We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
F1 is tied to dimensions D1,D2,D3,D4,d5
F2 is tied to dimensions D3,D4,D5, D6 and D7.
In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
and then does a cross fact join out of box between 2 queries.
But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
Thanks.

Manage three different Levels of iOS?

Similar Messages

Maybe you are looking for