Mapping Number Problem
HI all,
i create my project on OWB 10 and after i deploy it on OWB 11gR2 and everything works good, despite of the external tables data don't show numbers with comma, my flat file (csv) has data like ( 123,43) and i don't find in the external table any data which is decimal ,how i can fix this .
Thanks
Hi
See note 268906.1 for details.
Basically it tells you to create a VARCHAR2 column for the numbers and to format in a view/ETL logic that uses the external table.
CREATE VIEW v_exttable2 AS
SELECT field1, TO_NUMBER(field2) field2, field3
FROM exttable2
Now, a select from v_exttable2 loads the data but depends on what NLS_SESSION_PARAMETERS you have set:
* when NLS_NUMERIC_CHARACTERS is set in your session to '.,' then you can load data that contains dots as decimal separator.
* when NLS_NUMERIC_CHARACTERS is set in your session to ',.' then you can load data that contains commas as decimal separator.
Cheers
David
Similar Messages
-
Aperture 2 install - serial number problem
Disclaimer: I'm pretty good on a pc. Absolutely terrible on Mac, never had so many problems with tech :/
So...I have my serial number from the back of the Aperture 2 "Installing your software" booklet. Checked that I'm entering "I's" not "1's." Got dashed between the sequences. Capslock on etc. Searched forum, quite a few posts on serial number problems. None matched.
Enter serial number. Second window pops up stating I've entered an upgrade serial number (I only have the expired trial version of Aperture installed), and requesting my "serial number."
I'm lost now. Checked my original docs, there's nothing on Aperture trial version. Fired up the trial and I see what looks like a license key (to Apple, not me) on the launch screen. That's not accepted by Aperture 2.
Any thoughts on this appreciated.M_Austin wrote:
Thanks, think you solved this Wish the label said something like that, the box only says Aperture 2, not upgrade license. So I'm guessing I have to pay $199, and keep this $99 package to upgrade it? I hope not. I'll ask at the store.
There is a tiny label on the bottom edge of the box. Mine says "Aperture 2.0 Retail". The tiny label on my box for Final Cut Express 4 says "Final Cut Express 4.0 UPG". Does yours not say "UPG" on that little label? If not, you should be able to return it for the full version (plus pay the difference, of course). If it does say "UPG" you might be out of luck as most open software can't be returned. -
More than one map number per topic?
I have been asked to create context sensitive help with
RoboHelp6.
Is it possible to create bookmarks in a topic and have
different map numbers open to these different bookmarks in the same
topic OR does each map number have to have one unique topic?
JudyDuplicate thread. Please post follow-ups to:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=449&threadid=1377886
Pete -
Pls help me with Mac and had a trial serial number problems
Hi,
I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
What can I do? any idea?
to uninstall the photoshop and install again?
but if I have the other programs working and installed?Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
Date: Sat, 1 Aug 2009 11:53:58 -0600
From: [email protected]
To: [email protected]
Subject: Pls help me with Mac and had a trial serial number problems
Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Good luck!
> -
Serial number problems for cs5
I'm having problems installing CS5 on my macbook air.
Can you explain more specifically what your problem installing CS5 is? What are the serial number problems?
-
Installing ios8.2 does not resolve Google map navigation problem or gps tracking!
Installing ios 8.2 does not resolve Google map navigation problem.
I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea .. -
Unable to interpret u3030u0081@ as a number - problem
Hi,
We've got problem with BPMs which use graphical (java) mapping. In SXI_MONITOR such processes have "Message being sent" status. In process engine workflow log it stops at mapping step with "In process" status. Technical details show that there is a tRFC call which fails with "Unable to interpret 〰@ as a number.". This is also visible in ST22. BPM without mapping works without any problems. Test mapping in integration repository works fine.
Has anyone got any ideas?
Kind regards,
Michal KrawczykHi,
Have you tested your mapping using the actual source message that caused the error in BPM?
From the BPE monitor copy-n-paste the actual message into the Interface Mapping test tool.
Regards,
Bill -
IPhoto 8.1 Garmin Oregon 550t map display problem
I am trying to view photos captured by a Garmin Oregon 550t in iPhoto. The locations shown on the map are wrong.
Further investigation of the previously reported problem with iPhoto 8.1 displaying incorrect location information in the map display reveals that the EXIF information captured by the Oregon 550t is unusual in that it captures the longitude as a large number of seconds with 0 minutes. e.g. Longitude: W 105° 0' 810.000116 as reported by EXIF Viewer.
This unusual format seems to throw off iPhoto.
Aperture interprets the data correctly reporting Longitude 105º 13' 30.000" W.
Has anyone else seen this problem?I user EXIF viewer http://homepage.mac.com/aozer/EV/
This photos works fine in iPhoto and with Preview
Using EXIF viewer the GPS section of a working photo looks like:
Latitude: N 29° 52' 10.86
Longitude: E 31° 13' 0.48
Altitude: 48.00 m
Time (UTC): 08:36:21
GPS Status: Measurement In Progress
Geodetic Survey Data: WGS-84
The same photo in Preview shows:
Altitude: 48 m (157.5 ft)
Altitude Reference: above sea level
GPS Version: 2.2
Latitude: 29° 52' 10.86" N
Longitude: 31° 13' 0.48" E
Map Datum: WGS-84
Speed: 0
Speed Reference: Kilometers per hour
Status: A
Time Stamp: 08:36:21.00
The info you showed is in a different format - my photos work fine with iPhoto
What version of iPhoto '09 do you have (8.1 is the latest) - some earlier versions had some issues with some types of GPS data - I've not seen any such issues since 8.0.3 (I think)
LN -
Personal number problem in the Custom HCM Process
We developed custom ESS-MSS application using Webdynpro ABAP and SAP HCM is backend for employees,Managers and HR data.
User A has custom ess role and standard ess(Webdynpro java ESS-MSS business package)
First time in the Custom ess role Employee(User A) try to change the personal information it is giving error
"Process Zxxx only useful if personnel number is specified"
If the Same Employee(User A) clicks the Standard ESS role and Come back to the custom ESS role and try to change the Employee
information the HCM process is working
After Clicking Std ESS role and Come back to the Custom ESS role the error does not exist.
else,
"Process Zxxx only useful if personnel number is specified" .
how the pernr details of the employee is getting populated to memory variable ESS01
Can you please help me how to solve the problem.Hi,
Thanks for your reply
We have mapped the user for the employee at PA30 trans through communication info 105 and sub 0001
The iview, does not give any error
if we execute
1.Standard Employee self service
2.then running our custom role and hence custom iview
In the appintegrated iview, we are calling asr_process_execute (WD ABAP standard application) with the parameter
Process=Zxxx&GET_PERNR=X&PERNR_MEM_ID=ESS01
We found thatthere was an entry for this user at table "indx" when we execute Standard Employee self service.
Also,
If the table "INDX" has an entry for the user, then our custom iview runs with out any error, since the value for the
MEMID= ESS01 exists.
Apart from mapping the user through comm info type 105, what we shoud do to have an entry for this user at table "INDX"
Please give suggestion
please help me
Thanks -
House Bank number problem with BSP import
Hi,
I have a problem when i import an bank statement that i get an error that the house banknumber is not the same as in de import file. I believe the problem is that in de house bank definition in SAP there are dots (.) between the housebank number like 12.56.58.789 and in the import file on row :25 there are no dots between the number 125658789. Does anybody know how to solve this problem ? i tried something with the add-on format definition and find out that the field "AccountInfo" need some changes.
The expression that is used in the bfp file is (?<=:25:)[^\r\n]*(?=\r\n)
Can somebody help me?
THANKS
MarkHi Mark,
The rule for importing data from a bank statement is that house bank account defined in B1 and the data filled into account number field should match bit by bit. So in your case there are two options:
1. change the account number definition in B1 to remove all the dots.
2. if that's impossible, you have to change the BFP file via Format Definition add-on to insert the dots into the pure digit series. that could be done by assigning a mapping method to the account number field.
use concat() function and substring() function together. about the usage of the function ,you can refer to the online help of the tool.
Cheers,
Tedy -
Hi ,
I have some problem when i was trying to excute my mapping
it throws below exception.
RuntimeException in Message-Mapping transformation: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too many values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.tf3.CBufIter@52c052c0, com.sap.aii.mappingtool.tf3.CBufIter@5c195c19, com.sap.aii.mappingtool.tf3.CBufIter@65726572]
can anybody please look into this. and suggest me ..
Regards,
SandeepHi,
One as many node function takes 3 inputs, first is the source value second is the Howmany times the source value should repeat and third one is where the context should change, here 2nd and 3rd input count should same, otherwise it shows an exception.
Follow this link
Introduction to Context Handling in Message Mapping
And one more is we should pass some value to the One as many node function, so put map with default. -
I've got a MBP running Mtn Lion. Messages will not bring up, nor can I add my iPhone's cell number to my Messages account.
My iPhone is running iOS 5.1.1.
Having said that, my wife's iPhone, running iOS 6.0.1 is showing up as the default number on my Messages account. Apparently when an iPhone is running iOS 6, it will show up as a possible phone number for Messages...
Messages has a bit of double-speak associated with this problem. The Messages help pages indicate that the phone numbers that show up are those associated with the Apple ID (but they don't on my system). However, I've read (and darned if I can't find the text again, now), that an iPhone running iOS 6 will show up as a number for the Apple ID...
I've tried adding my phone number to the "add email address" field (per another thread's solution), but this hasn't worked for me...
So, short of upgrading my iPhone's iOS (which I'd rather not do until the iOS 6 maps fiasco has been remedied, or Google Maps is available as an app, again), is anyone aware of a fix to this problem...
Any thoughts?!?!
Thanks
BobHi,
To get the Mac App Messages and an iPhone to get the iPhone Number into Message as a Send and Receive item you have to be on OS X 10.8.2 and iOS 6 at least.
At iOS 5.1.1 the Message App on the iPhone will only "sync" the iMessages sent to the iPhone that were sent to the Apple ID.
The iPhone Number's Messages will not sync to the Messages app on the Mac.
iMessages sent to the iPhone Number therefore tend to be "private" from the syncing that is going on with iMessages to the Apple ID
Apple uses the word "sync" but "Display on all devices" is a more accurate description as what you do with the iMessage on one device does not show up on others.
You will have noticed that on the iPhone in Settings > Messages that the "Receive at" has become Send and Receive and includes the iPhone Number.
This is replicated to some extent in the Messages version 7.0.1 (At the OS X 10.8.2 update) with the iPhone Number(s) being a Send From option in the drop down at the bottom.
For the Points
8:25 PM Friday; December 7, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Goods receipt MB01 with serial number problem
Dear MM Experts,
Iam a PM Consultant and this problem faced me while doing goods receipt from external maintenance order so i will appreciate any help regarding this issue,
In serial number profiles i did the stock check indicator to give an error message if there were incosistinces in stock data,
now this is the scenario:
after doing an external maintenance order and creating a PO with reference to the maintenance order PR, and also entering the specified serial number in the PO:
1) Goods Issuing: i used MB1B with movement type 541 and as the serial number already exist and not wrong so it didnt show any error messages and by checking the stock data in MMBE the material was in stock provided to vendor.
2) Goods Receipt: when using MB01 with movement type 101 and when entering the serial number of the material it gives an error message ALTHOUGH it is the same serial number issued and the same serial number in the PO
This is the error message :
Stock data of serial number G081 not suitable for movement
Message no. IO231
Diagnosis
The current stock information for the serial number G081 contradicts the stock information of the movement to be posted. The following stock information is valid for the document and the serial number: Batch Number Stock data Serial data C2
Only the first different field for the stock data/serial data is assigned. However, further data may also be inconsistent. To determine whether this is the case, you can start an analysis.
System Response
Two system responses are possible (set using Customizing): If the case of an error occurring, the assignment of the serial number to this posting procedure is not possible. In the case of a warning, you can, if necessary, transfer the notification.
Procedure
Assign a serial number which corresponds in your stock information to the stock data of the posting. You can display the serial numbers which can be used using Select serial numbers.
Any help is appreciated
Thanks in advanceHello,
A possibility to fix serial number status is by running the report RISTEQ07 in SE38 transaction. Please run this report as mentioned in the SAP Note 316868 (point 2).
While running the report please consider following points:
The report does not set any locks on the records to be corrected, in other words, the report should only then be executed in the correction mode if the master records (within the client) are not being used in another (changing) access.
During the search for inconsistent serial numbers, the system assumes that the stock segment is correct and the existence indicator might be incorrect.
In the correction mode, the existence indicator is adjusted (depending on the existence of the stock segment).
The report provides a test option (LP_TEST); if this option is active, the system only checks whether inconsistencies exist. Corrections are only carried out if the test mode is deactivated. Option LP_EXTD for the enhanced check should remain deactivated for the first run. In particular, if no inconsistency is recognized, the run should be repeated with the activated option.
Another possibility is to create/post a physical inventory document for the affected material and serial number.
Determine which material serial number is really on stock (physically on stock). You can do this, by either analyzing the history of each Serial Number or by carrying out a physical inventory.
Before posting the Physical Inventory the stock validation of the serial number profile of the material has to be switched off in OIS2 transaction (if it is switched on).
When you do this, you will get a Pop-up, please read the long text and execute the report RISERNR9 which is mentioned there.
After executing this report the inventory can be posted. When this is done please switch stock validation on again and execute report RISERNR9 again.
Perform this inconsistency correction only when you are sure that no one else is working on the system otherwise it could lead to more inconsistencies while the stock validation is switched off. Check SAP Note 612132 for further details.
In another words, you have to:
Create a physical inventory in MI01 transaction;
Enter a counted quantity in MI04 transaction;
Define each serial number to each qty on stock.
I hope this information helps you.
Good luck,
Fábio Almeida
MM Consultant -
Maps Location Problems - PLEASE HELP
I have an 8 Gb iphone with firmware 1.1.4 and am trying to use the maps location feature. it will not work unless i turn my WiFi off and then try to locate and once i have been located i can turn WiFi back on and get a more accurate location. even if i am not connected to WiFi but i still have the WiFi feature turned on it will not work. please help
I recall this post before. Were you the same one that posted it? The Google map location function seems to be the problem here, and it could be an issue with the application. Did you try the troubleshooting steps in order, power off/on, reset, restore? If you did and that doesn't seem to fix it, then I suggest a trip to the Apple Store Genius bar. I also find it interesting that once you get a location, that turning on the WiFi gets it more accurate. I've not seen that. The location goes out and gets its information from a webserver. If there is an issue connecting to their database, I don't know that you would get an error message. I think I posted the name of the server before, I just can't remember it now. There is a way to update location information with that service, it is posted on their webpage. I know I have the location saved on my desktop, it's is just that I'm away from home right now on my laptop. I'll see if I can find it for you.
-
Serial number problem upgrading from Tryout and 5.1 to 5.5 CS Standard
Hi
Long one...!
I bought a new iMac and CS5.5 Design Standard. Installed it. Didn't have my education serial at the time so ran as trial. All good.
Received serial from Adobe. Put it in and Indesign was OK with it and upgraded to 5.5, but others stayed as Tryouts. Reinstalled, same problem.
Contacted Adobe who said the serial was for Windows. After much messing around they issued another serial. Put it in. It changed when I put the disk in to try and reload. (Last four digit box changes itself to XXX). Other two packages went from Tryout to 5.1.
Uninstalled whole package and reinstalled using the code Adobe Support gave me. Indesign back as 5.5 but other two still only 5.1
Why might this be?
You don't have to read the following but it may help.
Thank you for answers or suggestions. At wits' end here!
Sam
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 2 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with Arun Kumar.
sam: Hello
Arun Kumar: Hello! Welcome to Adobe Customer Service.
Arun Kumar: Hi! Sam.
sam: My copy of CS design standard says my serial number isn't correct
Arun Kumar: May I please have your email address registered with Adobe while I review your request?
sam: .......................
Arun Kumar: Thank you for the information.
Arun Kumar: I understand that you need assistance regarding serial number. Is that correct?
sam: You emailed me the serial after I sent in supporting evidence of eligibility and i pasted it into the startup. The startup seems to have gone but the prgarm still says trial version
Arun Kumar: Okay, sure I will help you with this.
Arun Kumar: May I have the serial number?
sam: "Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- .....................
sam: I pasted it into the box
Arun Kumar: Okay.
Arun Kumar: I checked with the serial number and it's correct.
Arun Kumar: Are you using the correct dvd?
sam: The suite installed and the nag screen's gone but the product still says it's a trial version
sam: I used the dvd provided
Arun Kumar: May I know which software trail version is installed on your machine?
Arun Kumar: Are we still connected?
sam: Sorry
sam: Creative Suite Design Standard 5.5
sam: Ai and PS say it's a tryout on the startup screen
Arun Kumar: In this case, I suggest you to uninstall the trail version and install the Design Standard CS 5.5 with the help of DVD.
sam: The dvd was where I installed what I have from
sam: I deleted and reinstalled PS as I thought there was another problem with it
Arun Kumar: May I know which software was there before you installing the software form DVD?
sam: Brand new iMac
Arun Kumar: Sam, you install it in trial version, there you will get option of help, click on help and register the serial number.
Arun Kumar: Your product will get converted to full version.
sam: I'm new to Macs. How do I uninstall it?
Arun Kumar: Don't uninstall it.
sam: OK. Can you give me a refernce for this case for itf it doesn't work?
Arun Kumar: With the help of DVD run the software and choose the trial version.
sam: Choose the trial version???
Arun Kumar: You will get two options when you will install it with DVD one is run the trail version and another is enter the serial number.
Arun Kumar: Did you got this two option when you installed the software?
sam: I was going to do it later! Shall I do it now?
sam: If you don't mind waiting...
Arun Kumar: Installation will take time and we can't wait for so much time.
Arun Kumar: I will provide you all the steps.
sam: OK
Arun Kumar: If you still get any problem, you can contact us back. We are available 24/7
Arun Kumar: When you will install the software, you will get two option.
Arun Kumar: 1) install on trail version.
Arun Kumar: 2) enter the serial number.
Arun Kumar: By both way you can activate the product.
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Pritam'
Pritam: Hello. Welcome to Adobe Technical Support.
Pritam: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Pritam: Could you please provide your email address?
sam: [email protected]
Pritam: Hello SAm
Pritam: *Sam
Pritam: AS I understand you are having an issue with the activation of the product,am I correct?
sam: Hi Pritam
sam: I've had two long discussions with your chatroom people. Very willing but still no success activating two of the products. The ID product has changed to 5.5 but AI and PS don't accept the serial code I was given. Please would someone let me know what to do? The trial is running out and I need the software!
sam: I mean Live Chat
Pritam: Thank you fro confirming the issue.
Pritam: *for
Pritam: I will try my level best to help you out with the issue.
Pritam: May I have the serial number of the product?
sam: 1408-1108-9876-3887-8290-4164
Pritam: Sam ,may I know are you trying to activate the product in Windows or MAC?
sam: A new iMac
sam: You're welcome to remote view the machine if it helps
Pritam: Sam, this is why you are having an error in activating.
Pritam: The serial number which you have provided is for Windows and you are trying to activate the product in MAC ,because of this you are not able to activate the product.
sam: It's the one you sent me this morning
sam: I sent in my education user support case stuff yesterday and included tproduct code from the packaging
sam: Can you give me a Mac serial?
Pritam: Please allow me a moment.
Pritam: Thank you fro staying online.
sam: No problem
Pritam: As we are from the technical team ,we don't have the resource for the changing serial number to MAC.
Pritam: In this case I will transfer the chat to our customer service team,they will help you out with the issue.
Pritam: May I transfer the chat?
sam: Thanks... this is from the email today: Your Adobe ID:............ Your Case Number:............ With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- ........................
Please wait while I transfer the chat to the appropriate group.
You are now chatting with Daniel Pedapenki.
Daniel Pedapenki: Hello! Welcome to Adobe Customer Service.
Daniel Pedapenki: Hi Sam.
Daniel Pedapenki: May I please have your email address registered with Adobe while I review your request?
sam: Hi Daniel
sam: ...............
Daniel Pedapenki: Thank you for the email address.\
sam: Email to me today:
sam: sam: Thanks... this is from the email today: Your Adobe ID:............... Your Case Number:................... With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- .....................
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Please elaborate the issue which you are facing now.
sam: The activation screens won't accept the number as the product
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Sam, I see that the serial number is for the product Design Standard CS 5.5 Win platform and it is not activated till now, may I know the exact error message please?
sam: AI and PS startup screens say they're CS5 tryout
sam: The Indesign package seems happy with the code and says it's 5.5. Off the same CD
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Okay Sam.
sam: Hi
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
sam: Thanks for your help
Daniel Pedapenki: Sam, on the installation window, is it mentioned as Design Standard CS5.5 and Design Premium CS5.5?
sam: Just looking now
Daniel Pedapenki: Alright!
Daniel Pedapenki: Just to confirm, are you trying to install the program on Mac machine?
sam: Yes. The programs work as trials fine
Daniel Pedapenki: Thank you for the information.|
Daniel Pedapenki: Sam, since you are using the Windows version serial number, to install the program on Mac machine, you are getting this issue.
sam: One of the three packages seems OK
sam: I'm opening the installer now
Daniel Pedapenki: Sorry for the wait. Please do stay online.
sam: It just goes through to the Enter Serial Number... Provide a serial number...Install this product as a trial... etc
Daniel Pedapenki: Sam, please confirm, me if you have installed the product in Win or Mac?
sam: THE SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT... INSTALL THIS PRODUCT AS A TRIAL
sam: Mac
Daniel Pedapenki: Sam, as the serial number of the product is for Win platform, you can use the product in Mac platform.
sam: Do you mean 'cannot'?
Daniel Pedapenki: *cannot
Daniel Pedapenki: Yes, you are correct.
sam: The three programs are running fine but two as tryout only. I only have this one disk to load from, supplies by Apple with the new machine
sam: The box says 'For sale only with a new Mac'
Daniel Pedapenki: Sam, you have to install the product in Win platform as the serial number issued for you is for Win.
sam: Not going to do that. Please give me a working serial number
sam: I haven't got a disk for Windows installation anyway
Daniel Pedapenki: I'll be right with you.
sam: Thanks
sam: I have only a couple of weeks to register this! And I need it for my coursework!
Daniel Pedapenki: You are welcome.
Daniel Pedapenki: Sam, the coupon code and the part number which you have provided to use for the edu serial number is for Win platform, in this case, we have provided you the serial number for the Win platform.
Daniel Pedapenki: You can check in your mails for this information,.
sam: Can you confirm back to me the product code?
sam: I can photograph the box and email you showing the stickers etc
sam: The part number on the back of the package is 91047958, yes?
Daniel Pedapenki: Product name: CS5.5 Design Standard.
Daniel Pedapenki: Part number (PN): 91047958
Daniel Pedapenki: Coupon code: dsgnm3-1........
Daniel Pedapenki: Design Standard CS 5.5--- ................
sam: There's also a sticker saying PN: 65147483
sam: Lot code 12056
sam: I don't know where in my emails I said it was for Windows?
sam: Also, why has Indesign activated properly?
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Sam, the serial number is for the Win platform, in this case, you can use this serial number in the Win platform.
sam: I did not buy the software to use in Windows. I am moving completely to Apple
sam: As I asked above:
sam: sam: I don't know where in my emails I said it was for Windows? sam: Also, why has Indesign activated properly?
sam: Why did the Education activation people give me the wrong number?
sam: Two possible solutions now are that you give me the correct serial number, or send me another disk which will activate properly on OS X
Daniel Pedapenki: I'll be right with you.
sam: I'm feeling like I have done something wrong here... and it's not a good feeling
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
Daniel Pedapenki: Sam, in this case, I'll provide you the new serial number for Mac version.
sam: OK
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Pritam'
Pritam: Hello. Welcome to Adobe Technical Support.
Pritam: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Pritam: Could you please provide your email address?
sam: [email protected]
Pritam: Hello SAm
Pritam: *Sam
Pritam: AS I understand you are having an issue with the activation of the product,am I correct?
sam: Hi Pritam
sam: I've had two long discussions with your chatroom people. Very willing but still no success activating two of the products. The ID product has changed to 5.5 but AI and PS don't accept the serial code I was given. Please would someone let me know what to do? The trial is running out and I need the software!
sam: I mean Live Chat
Pritam: Thank you fro confirming the issue.
Pritam: *for
Pritam: I will try my level best to help you out with the issue.
Pritam: May I have the serial number of the product?
sam: 1408-1108-9876-3887-8290-4164
Pritam: Sam ,may I know are you trying to activate the product in Windows or MAC?
sam: A new iMac
sam: You're welcome to remote view the machine if it helps
Pritam: Sam, this is why you are having an error in activating.
Pritam: The serial number which you have provided is for Windows and you are trying to activate the product in MAC ,because of this you are not able to activate the product.
sam: It's the one you sent me this morning
sam: I sent in my education user support case stuff yesterday and included tproduct code from the packaging
sam: Can you give me a Mac serial?
Pritam: Please allow me a moment.
Pritam: Thank you fro staying online.
sam: No problem
Pritam: As we are from the technical team ,we don't have the resource for the changing serial number to MAC.
Pritam: In this case I will transfer the chat to our customer service team,they will help you out with the issue.
Pritam: May I transfer the chat?
sam: Thanks... this is from the email today: Your Adobe ID:............... this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- 1.............
You are now chatting with Daniel Pedapenki.
Daniel Pedapenki: Hello! Welcome to Adobe Customer Service.
Daniel Pedapenki: Hi Sam.
Daniel Pedapenki: May I please have your email address registered with Adobe while I review your request?
sam: Hi Daniel
sam: .................
Daniel Pedapenki: Thank you for the email address.\
sam: Email to me today:
sam: sam: Thanks... this is from the email today: Your Adobe .............0 With this response, we believe your issue is resolved and have therefore closed your case .. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- ...............4164
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Please elaborate the issue which you are facing now.
sam: The activation screens won't accept the number as the product
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Sam, I see that the serial number is for the product Design Standard CS 5.5 Win platform and it is not activated till now, may I know the exact error message please?
sam: AI and PS startup screens say they're CS5 tryout
sam: The Indesign package seems happy with the code and says it's 5.5. Off the same CD
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Okay Sam.
sam: Hi
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
sam: Thanks for your help
Daniel Pedapenki: Sam, on the installation window, is it mentioned as Design Standard CS5.5 and Design Premium CS5.5?
sam: Just looking now
Daniel Pedapenki: Alright!
Daniel Pedapenki: Just to confirm, are you trying to install the program on Mac machine?
sam: Yes. The programs work as trials fine
Daniel Pedapenki: Thank you for the information.|
Daniel Pedapenki: Sam, since you are using the Windows version serial number, to install the program on Mac machine, you are getting this issue.
sam: One of the three packages seems OK
sam: I'm opening the installer now
Daniel Pedapenki: Sorry for the wait. Please do stay online.
sam: It just goes through to the Enter Serial Number... Provide a serial number...Install this product as a trial... etc
Daniel Pedapenki: Sam, please confirm, me if you have installed the product in Win or Mac?
sam: THE SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT... INSTALL THIS PRODUCT AS A TRIAL
sam: Mac
Daniel Pedapenki: Sam, as the serial number of the product is for Win platform, you can use the product in Mac platform.
sam: Do you mean 'cannot'?
Daniel Pedapenki: *cannot
Daniel Pedapenki: Yes, you are correct.
sam: The three programs are running fine but two as tryout only. I only have this one disk to load from, supplies by Apple with the new machine
sam: The box says 'For sale only with a new Mac'
Daniel Pedapenki: Sam, you have to install the product in Win platform as the serial number issued for you is for Win.
sam: Not going to do that. Please give me a working serial number
sam: I haven't got a disk for Windows installation anyway
Daniel Pedapenki: I'll be right with you.
sam: Thanks
sam: I have only a couple of weeks to register this! And I need it for my coursework!
Daniel Pedapenki: You are welcome.
Daniel Pedapenki: Sam, the coupon code and the part number which you have provided to use for the edu serial number is for Win platform, in this case, we have provided you the serial number for the Win platform.
Daniel Pedapenki: You can check in your mails for this information,.
sam: Can you confirm back to me the product code?
sam: I can photograph the box and email you showing the stickers etc
sam: The part number on the back of the package is 91047958, yes?
Daniel Pedapenki: Product name: CS5.5 Design Standard.
Daniel Pedapenki: Part number (PN): 91047958
Daniel Pedapenki: Coupon code: dsgnm3-1.........
Daniel Pedapenki: Design Standard CS 5.5--- ...........
sam: There's also a sticker saying PN: 65147483
sam: Lot code 12056
sam: I don't know where in my emails I said it was for Windows?
sam: Also, why has Indesign activated properly?
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Sam, the serial number is for the Win platform, in this case, you can use this serial number in the Win platform.
sam: I did not buy the software to use in Windows. I am moving completely to Apple
sam: As I asked above:
sam: sam: I don't know where in my emails I said it was for Windows? sam: Also, why has Indesign activated properly?
sam: Why did the Education activation people give me the wrong number?
sam: Two possible solutions now are that you give me the correct serial number, or send me another disk which will activate properly on OS X
Daniel Pedapenki: I'll be right with you.
sam: I'm feeling like I have done something wrong here... and it's not a good feeling
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
Daniel Pedapenki: Sam, in this case, I'll provide you the new serial number for Mac version.
sam: OK
Daniel Pedapenki: Sam, please be online for 2 minutes.
sam: OK
Daniel Pedapenki: Thank you.
Daniel Pedapenki: Sam, the new serial number is .........6201.
Daniel Pedapenki: Is there anything else I can help you with?
sam: Can I just try that serial
Daniel Pedapenki: I'm sure you can activate the product with out any issue.
Daniel Pedapenki: Please feel free to contact us if you need more assistance.
Daniel Pedapenki: Do you have any further questions for me today?
sam: No thanks
Daniel Pedapenki: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
You are not currently connected to a chat representative.
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Pritam'
Pritam: Hello. Welcome to Adobe Technical Support.
Pritam: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Pritam: Could you please provide your email address?
.......Pritam: Hello SAm
Pritam: *Sam
Pritam: AS I understand you are having an issue with the activation of the product,am I correct?
sam: Hi Pritam
sam: I've had two long discussions with your chatroom people. Very willing but still no success activating two of the products. The ID product has changed to 5.5 but AI and PS don't accept the serial code I was given. Please would someone let me know what to do? The trial is running out and I need the software!
sam: I mean Live Chat
Pritam: Thank you fro confirming the issue.
Pritam: *for
Pritam: I will try my level best to help you out with the issue.
Pritam: May I have the serial number of the product?
sam: .-4164
Pritam: Sam ,may I know are you trying to activate the product in Windows or MAC?
sam: A new iMac
sam: You're welcome to remote view the machine if it helps
Pritam: Sam, this is why you are having an error in activating.
Pritam: The serial number which you have provided is for Windows and you are trying to activate the product in MAC ,because of this you are not able to activate the product.
sam: It's the one you sent me this morning
sam: I sent in my education user support case stuff yesterday and included tproduct code from the packaging
sam: Can you give me a Mac serial?
Pritam: Please allow me a moment.
Pritam: Thank you fro staying online.
sam: No problem
Pritam: As we are from the technical team ,we don't have the resource for the changing serial number to MAC.
Pritam: In this case I will transfer the chat to our customer service team,they will help you out with the issue.
Pritam: May I transfer the chat?
sam: Thanks... this is from the email today: Your Adobe ID:. Your Case Number:0207655150 With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- 1.-4164
Please wait while I transfer the chat to the appropriate group.
You are now chatting with Daniel Pedapenki.
Daniel Pedapenki: Hello! Welcome to Adobe Customer Service.
Daniel Pedapenki: Hi Sam.
Daniel Pedapenki: May I please have your email address registered with Adobe while I review your request?
sam: Hi Daniel
sam: [email protected]
Daniel Pedapenki: Thank you for the email address.\
sam: Email to me today:
sam: sam: Thanks... this is from the email today: Your Adobe ID:..........Your Case Number:......... With this response, we believe your issue is resolved and have therefore closed your case 0207655150. If your support case has not been completed to your satisfaction or you should you need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed. Hello, Thank you for your proof of academic status. Here is your serial number for Design Standard CS 5.5--- .-4164
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Please elaborate the issue which you are facing now.
sam: The activation screens won't accept the number as the product
Daniel Pedapenki: Thank you for the information.
Daniel Pedapenki: Sam, I see that the serial number is for the product Design Standard CS 5.5 Win platform and it is not activated till now, may I know the exact error message please?
sam: AI and PS startup screens say they're CS5 tryout
sam: The Indesign package seems happy with the code and says it's 5.5. Off the same CD
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Okay Sam.
sam: Hi
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
sam: Thanks for your help
Daniel Pedapenki: Sam, on the installation window, is it mentioned as Design Standard CS5.5 and Design Premium CS5.5?
sam: Just looking now
Daniel Pedapenki: Alright!
Daniel Pedapenki: Just to confirm, are you trying to install the program on Mac machine?
sam: Yes. The programs work as trials fine
Daniel Pedapenki: Thank you for the information.|
Daniel Pedapenki: Sam, since you are using the Windows version serial number, to install the program on Mac machine, you are getting this issue.
sam: One of the three packages seems OK
sam: I'm opening the installer now
Daniel Pedapenki: Sorry for the wait. Please do stay online.
sam: It just goes through to the Enter Serial Number... Provide a serial number...Install this product as a trial... etc
Daniel Pedapenki: Sam, please confirm, me if you have installed the product in Win or Mac?
sam: THE SERIAL NUMBER IS NOT VALID FOR THIS PRODUCT... INSTALL THIS PRODUCT AS A TRIAL
sam: Mac
Daniel Pedapenki: Sam, as the serial number of the product is for Win platform, you can use the product in Mac platform.
sam: Do you mean 'cannot'?
Daniel Pedapenki: *cannot
Daniel Pedapenki: Yes, you are correct.
sam: The three programs are running fine but two as tryout only. I only have this one disk to load from, supplies by Apple with the new machine
sam: The box says 'For sale only with a new Mac'
Daniel Pedapenki: Sam, you have to install the product in Win platform as the serial number issued for you is for Win.
sam: Not going to do that. Please give me a working serial number
sam: I haven't got a disk for Windows installation anyway
Daniel Pedapenki: I'll be right with you.
sam: Thanks
sam: I have only a couple of weeks to register this! And I need it for my coursework!
Daniel Pedapenki: You are welcome.
Daniel Pedapenki: Sam, the coupon code and the part number which you have provided to use for the edu serial number is for Win platform, in this case, we have provided you the serial number for the Win platform.
Daniel Pedapenki: You can check in your mails for this information,.
sam: Can you confirm back to me the product code?
sam: I can photograph the box and email you showing the stickers etc
sam: The part number on the back of the package is 91047958, yes?
Daniel Pedapenki: Product name: CS5.5 Design Standard.
Daniel Pedapenki: Part number (PN): 91047958
Daniel Pedapenki: Coupon code: dsgnm3-1630-0679-7505-5758
Daniel Pedapenki: Design Standard CS 5.5--- 1.4164
sam: There's also a sticker saying PN: 65147483
sam: Lot code 12056
sam: I don't know where in my emails I said it was for Windows?
sam: Also, why has Indesign activated properly?
Daniel Pedapenki: Thank you for waiting. One moment please.
Daniel Pedapenki: Sam, the serial number is for the Win platform, in this case, you can use this serial number in the Win platform.
sam: I did not buy the software to use in Windows. I am moving completely to Apple
sam: As I asked above:
sam: sam: I don't know where in my emails I said it was for Windows? sam: Also, why has Indesign activated properly?
sam: Why did the Education activation people give me the wrong number?
sam: Two possible solutions now are that you give me the correct serial number, or send me another disk which will activate properly on OS X
Daniel Pedapenki: I'll be right with you.
sam: I'm feeling like I have done something wrong here... and it's not a good feeling
Daniel Pedapenki: Please allow me a moment to search for the information.
Daniel Pedapenki: Thank you for your patience.
Daniel Pedapenki: Sam, in this case, I'll provide you the new serial number for Mac version.
sam: OK
Daniel Pedapenki: Sam, please be online for 2 minutes.
sam: OK
Daniel Pedapenki: Thank you.
Daniel Pedapenki: Sam, the new serial number is 1......-6201.
Daniel Pedapenki: Is there anything else I can help you with?
sam: Can I just try that serial
Daniel Pedapenki: I'm sure you can activate the product with out any issue.
Daniel Pedapenki: Please feel free to contact us if you need more assistance.
Daniel Pedapenki: Do you have any further questions for me today?
sam: No thanks
Daniel Pedapenki: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
You are not currently connected to a chat representative.
When I inserted the disk it came up with the serial loaded as ...............7313-xxx
Deleted all and reinstalled, IT! changed my code as above to ...............6201 and all seemed promising….... etc.!Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob
Maybe you are looking for
-
My question is whether there is a user-friendly way of updating BOM prices in a volatile component environment. I think the answer is no, and that I will need to create a custom program to do so. The details... We have several customers which manuf
-
Can't get ch2 to work with tktds1k2k for Tek TDS 1002.
Why won't the tktds1k2k "Getting Started vi" display ch2? I modified it so that the Vertical.vi gets the same channel source as the "Read wvfrm to array vi". I am using a tds1002. When I set the source to ch2, the Read waveform to array vi times out.
-
My phone is frozen with the itunes symbol and usb cord. Tried to update and cannot, any suggestions
My phone is frozen with Itunes and a USB cord icons, I tried to shut it off and update and cannot..... any suggestions?
-
I can't find the "Authorize your computer" in the Itunes Store. I can't download my old purchases because it tells me I have to authorize the computer, but I can't find it anywhere!! I can enter my account and deauthorize the old computers, which I d
-
Connects to Wireless, but no ping to Gateway or Internet? (rt73usb)
Hi guys, I very rarely have any trouble on ArchLinux but last night I was forced to reboot my machine after a hard lock (which I'm not worried about). When the machine came up again, net-profiles successfully connected to my home network, but upon op