Marquee does not wrk when given under h:panelgrid

Hi,
I tried to give a marquee tag under a panel grid and it does not wrk.
without a grid it wrks.
<h:panelGrid id="gridformarquee" columns="1" width="80%">
                    <f:verbatim>
                         <marquee id="marquee1" scrollAmount="2" direction="up" loop="true"
                              height="140">
                              <h:outputText id="marqueetext1"
                              value="1. Training Sessions will be held next week " />
                         <h:outputText id="marqueetext2"
                              value="2. Expenses Approved " />
                              <h:outputText
                              id="marqueetext3" value="3. Update regarding the news " />
                         </marquee>
                    </f:verbatim>
               </h:panelGrid>
please suggest me if there is any other way to make it wrk.

Hi guys,
I found a solution to my problem.
marquee could be achieved in JSF using myfaces tomohawk tags.
<t:htmlTag id="marquee1" value="marquee">
                    <h:outputText id="marqueetext1"
                         value="1. HandHeld Training Sessions will be held next week " />
                    <h:outputText id="marqueetext2"
                         value="2. Time and Expenses Approved " />
                    <h:outputText id="marqueetext3"
                         value="3. Update regarding the Store Visit " />
               </t:htmlTag>
This works when placed under panel grid also.
:)

Similar Messages

Firefox does not "close" when closed under Windows 7; Task Manager must be used to "End Process." How do I close Firefox and reopen it without getting a "Still Running" error message?

Even though Firefox has been updated multiple times (currently using Ver. 3.6.13) since I started using Windows 7, I am still unable to totally close it from the toolbar or taskbar. Firefox does closeout on the screen but apparently continues to run in the background. If I open Firefox at a later time, I get an error message stating that Firefox is still running. I then have to go Task Manager to "End Process." Electing to do so allows me to restart Firefox. I never had this problem with Firefox when using Windows XP and I never have this problem with any other software under Windows 7.

https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit

TS1501 Image Capture does not launch when I connect my iPhone to my iMac and open iPhoto. No "Prefernces" is offered under Image Capture. I cannot import photos to iPhoto.

Can't import photos from iPhone to iPhoto. Image Capture does not launch when iPhone is connected to my iMac and iPhoto is open. There is no "Preferences" option offered to click when in Image Capture.

This helped me. It is advice I found from a user named Carlosmara. First make sure iPhoto is closed and your iPhone is not connected. Then, as Carlosmara stated in his post,
"Go to your Library/preferences and delete the file com.apple.iPhoto.plist
IPhoto should recognized the iPhone again."
The file in question is under your user folder.
I then restarted my mac and plugged in the iPhone so that it would sync. After the sync, when I opened iPhoto, my iPhone was recognized and I could download the photos perfectly.
Hopefully this will help you as it helped me

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions?

My new ipod 6th generation doesn't appear on itunes and does not charge when connecting to iMac...Any suggestions

If you have a PPC iMac, see KB Article: http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Intel iMac, see KB Article: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC)
Your iPod is "new" & still under warranty.
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Or, take your iPod Nano to your local Apple Store or AASP.

Finder does not open when a file passes over (mac os X 10.8.3)

Just installed mac os 10.8.3 mountain lion. As such, it seems with this OS X version the "finder" does not open when a file passes over (in order to move it from desktop).
The screen dims a little and nothing else happens.
How can I recover the "finder" functionality that apparently doesn not exist anymore?
Is it something wrong that I am doing?
Regards
José

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Background does not appear when set.

Hi,
My backgrounds do not appear when I set them.
Product name: HP 1000 1408AU
I have a photo on my desktop which i would like to be et as my background image and when i right click and select 'set as background image' it does not appear, the background just stays at blank. However when i tap the windows symbol on the keyboard (which takes us to the tiles) the desktop tile has my background image i selected. But when i click the desktop tile it does not come up.
This issue has been happening for at least 3 months.
Also when i go into the control panel, and then under the 'Appearance and Personalization' label, there is the 'Change destop background'. When i click this and select my image, and then click save changes it does not appear.
Also under the same 'Appearance and Personalization' label, when i click the 'change the theme' button, it says the image i selected is set to my desktop background, but it isnt. The background on my desktop is still blank. (blank black).
Could someone please help me with this issue?
Thanks.
P.s when explaining how to fix it please give simple straight forward instructions e.g click this then that then this......
Thanks again.
below is what my background looks like (even when an image is set)
This question was solved.
View Solution.

Hi Russell
Welcome to HP Support Forums!
See if this tutorial help you:
http://www.eightforums.com/tutorials/29777-background-show-image-solid-color-windows-8-8-1-a.html
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

MBB Does Not Sleep When Lid Shut

My macbook does not sleep when I shut the lid. This happened recently after I had my fan repaired. I also updated the OS at the same time, so I'm not sure which triggered the problem.
I would have to manually select sleep before shutting the lid; and I would have to press the space bar after I've opened the lid to wake it.
The following thread applies to a MBP. Apparently my problem might be a faulty latch.
http://discussions.apple.com/thread.jspa?messageID=5325605&tstart=0
I've reseted my PRAM, but that didn't work. My machine has been in for repairs 4 times (Fan, Logic Board, and the top case has been replaced twice due to cracks).
I'm wondering if I should send it back to the service centre to have it looked at. Apparently, if this is not a hardware problem, it won't be covered under AppleCare, and I would be charge. So just want to make sure...

I tried doing this fix using the guide on http://ifixit.com to dismantle my MacBook and find the battery/lid detector cable which indeed seemed loose at its connector just next to the headphone jack, but when I reassembled the mac still does not detect lid closing and now it doesn't even detect the battery anymore! Yikes! Looks like a trip to the apple store is required anyway.

I recently went from 10.4 to 10.6 and now itunes does not open when my phone is connected.

I recently went from 10.4 to 10.6 and now itunes does not open when my phone is connected. I have an iphone 3.

Connect your iPhone to your computer. Select it under Devices in the source list left side of the iTunes window.
Select the Summary tab from the menu.
Select: Open iTunes when this iPhone is connected.

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

- Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Ipod does not pause when headphones are removed

My Ipod touch 3g does not pause when playing music when my headphones are pulled out or removed. Can someone help with this problem? Thanks in advance

if a restore hasn't fixed it then it's probably a hardware problem. is it still under guarantee? you probably need to take it to apple.

My hp4530s wifi switch does not enable when selected

hp4530s with windows 7 prof. The wifi switch does not enable when selected in mobility manager in the control panel. The option is shown, however is grayed out and does not enable the wifi

Hi,
When was the last time that WIFI worked on the HP4530s? If you aer using a dock, then remove the laptop from the dock.
You can check the status of the WIFI adapter in Device Manager. You should have something similar to the below image if your model is equipped with WIFI.
The HP Support Assistant and also be used to troubleshoot network issues.
Look under the Internet and Security topics in HPSA for the adapter.
Try diagnostics under the My computer tab in HPSA
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT4623 My ipad does not have "Software Update" under Settings/ General asit is an ipda 2 so how do I upgrade to iSO 5?

I have an iPad 2 and I want to ugrade the sftware to iSO5. When following the instructions I am told to go to Settings / General/ Software Upgarde to then down load the Update. The iPad 2 does not have Software Update under General so how do I install iSO5?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Marquee does not wrk when given under h:panelgrid

Similar Messages

Maybe you are looking for