Mass Agent Deployment, fails when install

After trying to install, sometimes not only one, the Mass Agent Deployment, release 10.1.0.3, in Linux RED HAT 3 ES/AS, when trying to run runInstaller, I have ever the same response, 'TMP directory is full or cannot write files in Orainst<timestamp> directory, needing 60 MB of free space.
I have 16 GB of free space.
Any help?
thanks in advanced.
regards.

I solved it by doing following steps on the OMS server:
# unzip <OMS_HOME>/agent_download/10.2.0.1.0/hpunix/prereqs/prereq_hpunix.jar
# cd /oracle/product/oms10g/sysman/agent_download/
# cd 10.2.0.1.0/hpunix/prereqs/prereqs/agent
# vi oui_refhost.xml
In this file replace the <PACKAGE VALUE= lines for something you have already installed, I used the secure shell package, which you must have installed to use agent deployment:
<OPERATING_SYSTEM>
<VERSION VALUE="B.11.11"/>
<ARCHITECTURE VALUE="PA_RISC2.0"/>
<NAME VALUE="HP-UX"/>
<VENDOR VALUE="HP Corp"/>
<PACKAGES>
<PACKAGE VALUE="T1471AA" VERSION="0.0" />
<PACKAGE VALUE="Secure_Shell" VERSION="0.0" />
</PACKAGES>
# zip -r prereqs.zip META-INF
# zip -r prereqs.zip prereqs
# mv prereqs.zip prereq_hpunix.jar
After doing this retry the procedure.

Similar Messages

  • Update:: New OTN Mass Agent Deployment page

    Hello Everyone,
    We have been seeing lot of customers downloading wrong Agent software from the OTN for the respective platforms and then in turn the installation fails.
    So we have revamped the OTN mass agent deployment page and came up with new page(http://www.oracle.com/wocportal/page/wocprod/ver-DRAFT/ocom/technology/software/products/oem/htdocs/agent/test-otn_0.html), which is Live now.
    The new page classifies the Agent software based on the platforms names (32 / 64 bit) and further classifies based on the Agent releases.
    This will leave us with no gap of downloading the wrong agent software for a 32 or 64 bit platform.
    Thanks and Regards
    Akanksha

    I don't know if it is possible to uninstall the agent from the GUI. We don't have the provisioning pack. I guess it may be possible to create a job that would run the installer in silent mode to do an un-install. We have just done them interactively on the target server - going under agent_home/oui/bin & running the installer. Then if there is anything left over from the agent_home, after the installer updates the central inventory file.
    If run the install interactively on the target server, you should get a meaningful error message. I would guess that it sees that the agent already exists from the inventory. You could try launching the installer from the oracle server software home & then remove the "orphaned" agent home.
    Thanks,
    Brian

  • Cloud Control 12c Manual Agent deployment failed

    Agent Deployment fails
    •     EMCC 12c OMS Server node1 with os-username oemgrid
    •     Created the same os account on target server and granted it the same OS privs i.e., (dba os role).
    •     Initialization Phase -> Successful
    •     Remote Prerequisite check -> Successful
    •     Agent Deployment Failed
    ERROR: Execution of command /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=rac1.respecti.com AGENT_BASE_DIR=/u01/emcc/agent12c OMS_HOST=emcc.respecti.com EM_UPLOAD_PORT=1159 AGENT_INSTANCE_HOME=/u01/emcc/agent12c/agent_inst b_doDiscovery=false b_startAgent=false 2>/u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/logs
    CAUSE: Error Message Not Available. Exit Code 1.
    Agent Directory on Target is /u01/emcc/agent12c Owner:Group is oemgrid:dba from “/emcc/agent12c” . The “/u01” is owned by username “rac”.
    Red Hat Linux 5.6 64bit
    Any ideas on how to resolve this issue?
    AGENT_BASE_DIR=/u01/emcc/agent12c
    Validating the OMS_HOST & EM_UPLOAD_PORT
    Executing command : /u01/emcc/agent12c/core/12.1.0.1.0/jdk/bin/java -classpath /u01/emcc/agent12c/core/12.1.0.1.0/jlib/agentInstaller.jar:/u01/emcc/agent12c/core/12.1.0.1.0/oui/jlib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /u01/emcc/agent12c/core/12.1.0.1.0 /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM /u01/emcc/agent12c -prereq
    Validating oms host & port with url: http://emcc.respecti.com:1159/empbs/genwallet
    Validating oms host & port with url: https://emcc.respecti.com:1159/empbs/genwallet
    Return status:3
    Unzipping the agentcoreimage.zip to /u01/emcc/agent12c ....
    12.1.0.1.0_PluginsOneoffs_226.zip
    Executing command : /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/unzip -o /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/12.1.0.1.0_PluginsOneoffs_226.zip -d /u01/emcc/agent12c
    Checking the ownership of agent base directory:/u01/emcc/agent12c
    Checking for proper ownership on the agent base directory.
    Checks whether the agent base directory is owned by the agent user oemgrid and that its parent directory is owned by either the agent user or root.
    Login name is : oemgrid & file owner is : oemgrid
    ERROR : root dir is not owned by root user.

    Ensure that the root user owns the root directory. This is a prerequisite for installing an agent (in silent as well as GUI mode).
    See the prerequisite about "Installation Base Directory Requirements"in the Prerequisites section of the install guide:
    For Silent Instal (row 11): http://download.oracle.com/docs/cd/E24628_01/install.121/e22624/install_agent.htm#BABCFEGE
    For GUI Install (row 17) : http://download.oracle.com/docs/cd/E24628_01/install.121/e24089/install_agent_usng_rsp.htm#CEGIAADH
    Thanks!
    Edited by: user765751 on Oct 27, 2011 8:12 PM

  • Mass Agent Deployment

    Can I download and install Mass Agent Deployment 10.2.0.4 on my target host instead of install agent 10.2.0.2 then upgrade agent to 10.2.0.4?
    any diffrence?
    Thanks.

    if the agent is available for your platform for mass agent deployment (http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html) then this is possible.
    Best regards,
    Martin
    www.ora-solutions.net

  • When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    Hi Willy,
    Welcome to Apple Support Communities.
    The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
    Resolve iOS update and restore errors
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    I hope this helps,
    -Jason

  • Illustrator CS6 says "installation failed" when installing.

    Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!

    We can't know. You need to provide system information and possibly the install logs:
    Troubleshoot with install logs
    Mylenium

  • Install of Elements trial fails when installing Shared Technologies

    Have tried installing the Elements 10 trial on both an XP Pro and a Win7 Pro PC and have the same problem.
    Install of trial fails when installing Shared Technologies and then rolls back the install of the Elements Organiser.
    Anyone seen this before?   Any ideas?

    Can you please make your question a seperate thread?
    It would be helpful if you could please provide us the install log for it. Install logs can be found at C:\Program Files(x86)\Common Files\Adobe\Installers\ with name Elements STI Installer 1.0 <date>.log.gz
    Use a decompression utility such as Winzip to uncompress the .gz file. Once uncompressed, you will have a new file without the .gz extension. The filename could now be something like "Elemens STI Installer 1.0 11-21-2012.log."
    Open the .log file using notepad
    Copy the whole log and paste it here.
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

  • Authentication to agent workstation failed when trying to run a test in Oracle Test Manager

    I have the complete version of OATS installed on my local machine. I have the OracleATSHelper, OracleATSServer and OracleATSAgent services running.
    In OTM when I go to run an openscript test I select the system, type the version number and hit run and get a "Authentication to agent workstation failed" error in the summary field.
    It worked before but I cant figure out why it isnt working anymore.
    Can anyone help?

    ATS Version: 12.3.0.1.0 build 376
    I am getting the same error when trying to execute a script from OTM - "Authentication to agent workstation failed".
    I have the OTM server on a remote (server) machine and the Oracle Agent is running on my laptop / workstation. I've tried all I have seen on this thread, but no progress. The manager is now in manual mode and the console only provides the following output:
    D:\OracleATS\agentmanager\bin>d:\OracleATS\agentmanager\bin\AgentManagerService.exe -c  AgentManagerService.conf
    wrapper  | --> Wrapper Started as Console
    wrapper  | Launching a JVM...
    jvm 1    | Wrapper (Version 3.0.3)
    jvm 1    |
    One different thing, maybe, I see is that the agentmanager_auth.log is empty always.
    Also, on the server, I've added this SYSTEM successfully, i.e.the Testing of the SYSTEM added in OTM always gives the success message "The system specified can be successfully accessed by the Oracle Test Manager server."  . In fact it does this even when I provide an incorrect password!    

  • Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

    I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
    Event ID: 10005
    Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
    Event ID: 1008
    The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
    first DWORD in the attached data.
    Any idea why I receive this error?
    Thanks
    Mike

    Hi,
    Please refer to this article:
    SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
    http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
    Alex Zhao
    TechNet Community Support

  • ADFS MFA Adapter fails when installed manually

    Dear experts,
    When following the article on http://technet.microsoft.com/en-us/library/dn807157.aspx, my ADFS service cannot load the WindowsAzureMultiFactorAuthentication provider, eventid 105.
    I used the 'Install the AD FS Adapter standalone using the Web Service SDK', with the edited config file using a username and password. When browsing to the SDK folder on my MFA server using IE from the ADFS server, I can login and use all SDK services normally
    but ADFS fails. Installing MFA locally on the ADFS server fixes the issue, but manual configuration should be possbile according to the technet article.
    Also, there is an error in the technet document, it says to 
    Run the MultiFactorAuthenticationUserPortalSetup64.msi
    But this should of course be the adapter MSI file.
    Is there a fix?
    Sincerely,
    Jos

    Thanks for the note on the typo. We'll fix the documentation on MSDN and the MFA Server help file.
    For those having issues getting the adapter to work, we have had a couple of support cases escalated recently that both turned out to be typos in the config file. The registration script needs to have the correct path to the config file, and the config file
    should look something like this:
    <ConfigurationData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <UseWebServiceSdk>true</UseWebServiceSdk>
        <WebServiceSdkUrl>https://server.domain.com/MultiFactorAuthWebServiceSdk/PfWsSdk.asmx</WebServiceSdkUrl>
        <WebServiceSdkUsername>domain\username</WebServiceSdkUsername>
        <WebServiceSdkPassword>password</WebServiceSdkPassword>
        <WebServiceSdkCertificateThumbprint></WebServiceSdkCertificateThumbprint>
    </ConfigurationData>
    From the ADFS server, you can copy the WebServiceSdkUrl into a web browser. You should be prompted for a username/password. Enter or copy/paste what you have in the config file. it should display the web service operations without any certificate warnings.
    If there are warnings, you may have to import the certificate into the Trusted Root Certificate store so that the ADFS server trusts it.

  • Perlbrew - locale.t fails when installing perls

    I'm trying to use perlbrew in order to maintain private copies of Perl, rather than doing anything that might touch system Perl.
    I've installed perlbrew successfully, but my attempts to use it to install perl 5.12 and 5.14 have both failed, apparently due to some problems encountered when applying locale.t. 
    I'm running OSX 10.8.0.  Has anyone used perlbrew on this version, and/or encountered this problem?
    Thanks,
    Chap

    Hi Chap
    I'm running OS X 10.8.1.
    I got the same problem when install perl 5.8.5 use perlbrew 0.5.0.
    Then I try " perlbrew --force install perl-5.8.5 --notest ", it worked.
    You can try it!

  • OC4J Instance Failed when installing the SSO against FMW OID 11g

    Hi All,
    We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
    In Installer log it is showing Target Invocation Exception.
    Please anyone advise.
    Thanks in Advance.
    Vaasu.

    Hi All,
    We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
    In Installer log it is showing Target Invocation Exception.
    Please anyone advise.
    Thanks in Advance.
    Vaasu.

  • PE 9 always fails when installing shared technologies.

    I even paid for it (I know theres no diffrence) but I always get the same error (Adobe Premiere elements failed to install shared technologies. Rolling back changes). I have windows 7 x64 And after 3 HOURS of waiting of the phone for a rep, I decided not to contact them for any info. PE 7 installed fine, but they don't work on windows 7.

    Use task manager to see if you have any other Adobe software running in the background - Adobe Bridge is often the culprit for these installation errors. If you find anything running then use End Process.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • LR 5 installation failed when installing from cloud

    Error message:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR: DW006 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

    Hi dsharpechevychase,
    Please refer the kb: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html .
    Regards,
    Romit Sinha

  • Cygwin test failed when installing Cloud Control

    When installing Cloud Control OEM12 on Windwos, I need to set up Cygwin first. After setting up Cygwin on the two hosts (chdevora03 and chdevora05), I issued the following to test 'ssh' connection between them but got 'permission denied'. What could be wrong?
    $ ssh -l surrey\srvc_oracleadm chdevora03.surrey.ca 'date'
    [email protected]'s password:
    Permission denied, please try again.

    $ ssh -v srvc_oracleadm@chdevora03 'date'
    OpenSSH_6.1p1, OpenSSL 1.0.1e 11 Feb 2013
    debug1: Reading configuration data /etc/ssh_config
    debug1: Connecting to chdevora03 [172.16.2.249] port 22.
    debug1: Connection established.
    debug1: identity file /home/sryadoraz/.ssh/id_rsa type -1
    debug1: identity file /home/sryadoraz/.ssh/id_rsa-cert type -1
    debug1: identity file /home/sryadoraz/.ssh/id_dsa type -1
    debug1: identity file /home/sryadoraz/.ssh/id_dsa-cert type -1
    debug1: identity file /home/sryadoraz/.ssh/id_ecdsa type -1
    debug1: identity file /home/sryadoraz/.ssh/id_ecdsa-cert type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
    debug1: match: OpenSSH_6.1 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_6.1
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug1: kex: server->client aes128-ctr hmac-md5 none
    debug1: kex: client->server aes128-ctr hmac-md5 none
    debug1: sending SSH2_MSG_KEX_ECDH_INIT
    debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
    debug1: Server host key: ECDSA 67:ae:3c:f6:b4:7b:f6:e1:8e:6b:30:66:ea:51:ed:93
    debug1: Host 'chdevora03' is known and matches the ECDSA host key.
    debug1: Found key in /home/sryadoraz/.ssh/known_hosts:1
    debug1: ssh_ecdsa_verify: signature correct
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug1: SSH2_MSG_NEWKEYS received
    debug1: Roaming not allowed by server
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug1: Authentications that can continue: publickey,password,keyboard-interacti
    ve
    debug1: Next authentication method: publickey
    debug1: Trying private key: /home/sryadoraz/.ssh/id_rsa
    debug1: Trying private key: /home/sryadoraz/.ssh/id_dsa
    debug1: Trying private key: /home/sryadoraz/.ssh/id_ecdsa
    debug1: Next authentication method: keyboard-interactive
    debug1: Authentications that can continue: publickey,password,keyboard-interacti
    ve
    debug1: Next authentication method: password
    srvc_oracleadm@chdevora03's password:
    debug1: Authentications that can continue: publickey,password,keyboard-interacti
    ve
    Permission denied, please try again.
    srvc_oracleadm@chdevora03's password:

Maybe you are looking for