Mass change of component in Task list

Hi Experts
I have thousands of material and there are changes done for them to use them in maintenance order task list as stock or nonstock.
The task is to change the item category (from L to N or from N to L) of those materials used as components in task list and also find out those materials in BOM , Equipment TL and FL TL and change the item category.
1.can this be done using a BDC (checking all task list / BOM for that material and change the item category)
2. table to check component assigned to which operation in task list.
Any help for this requirement
Thanks
Jey

There is no standard transaction for the changing of components in the task lists this would have to be a bespoke program.
If you are looking to change the components allowcated to the Bills of Material you can use transaction CS20 where you can replace the exisitng component category N with the new component category L.
There is transactions for changing the PRT and Work Center if you get your ABAP consultant to have a look at the PRT transaction/program (transaction CA77) he may be able to copy and ammend this to make things a little easyer.
Jim

Similar Messages

Add component in task list

Hello All,
I have an issue with adding component in task list (for example task list number EIMN-68) via transaction IA05.
When I try to add component to operation, I get the message *
Standard BOM PAEIMN-68 4 already exists
Message no. 29771
Diagnosis
You want to create a standard BOM for standard object PAEIMN-68 with usage .
A BOM already exists for this standard object and usage. You cannot extend a standard a standard BOM.
Procedure
Check whether the standard BOM is suitable for standard object PAEIMN-68 and usage . If it is not, you need to create the BOM for another standard object.
Is there any special way to create material master for such components.Whats the solution.
Please help
Cheers
Sunny

Hi Pithan, how are you..
I want to add components.
Just now I was able to add components. I explain how:
When i added component number in operation, and press enter, system gave me the error that standard bom already exist. In the same screen I changed the BOM usage to 3 as universal usage. After this usage only, system allowed me to add components. No other bom usage allowed me to do so.
Also, why system took me to BOM screen if I just want to add components.
I wait for your reply.
thanks and regards
Sunny

Mass change in component Scrap % in BOM

Hi Guru,
Can someone explain me the process of mass change in component scrap % in BOM ? I have to make zero coponent scrap % in BOM for all materials.

Dear Vikash,
Check with t-code CEWB
for this you need to define work area in OP77
Regards
Madhu

Change equipment and functional task list

Hi All,
I have a requirment to mass change the equipment and functinal task list data.The upload file has the group, group counter and operation which i have to use has key fields and only one field value needs to be changed. the field value that needs to be changed is 'Work involved in the activity' (PLPOD-ARBEI) field. we have change the no of hours.
could anyone please let me know if there is a BAPI or function module to fulfill this particular requirment. I searched the forum but could not find any BAPI.
Thanks in advance.

hello,
see i can tell you onething....when you will go to routing screen (ca01,ca02,ca03)...
you will get a find button there on screen (see binacular sign)...when you click on that and enter any operation number ..then it brings that operation to first rwo and then you can modify the fields you wanted...
but if you want to modify operation ..user has to give the operation number along with routing group and group number....
while doing bdc recording you have to follow same same sequence of step...go to ca02 enter routing grp and grp counter from that screen go to header and from there go to operation screen ..click binacular button to find operation...then when that operation will come on first screen ..edi the field you want for that operation...
you can include all this recording in a Function module...take these grp number and grp counter as import parameters to FM and define a table for operation details .....and the execute ..it will change the operation..but remember the thing taht user shd know the vales op operation to be modify and grp number and grp counter..if he is trying to modify the operation which is not existing then ..you can give error message stating the same...so he will change the operation

Mass change of certain fields thru list of equipments IE

Hi,
Instead of writing LSMW, i am looking for mass change option for list of equipments available thru IE05 under Go To----> Carry out a mass change.
Its giving me a error message :
Objekt PM_MASS_TECH_OBJECTS is not maintained
Message no. BL010
Diagnosis
An application log entry is to be made for object PM_MASS_TECH_OBJECTS. This object is, however, not maintained as an application log object.
Objects and subobjects of the application log are created using transaction SLG0.
System Response
The program had to be cancelled.
Procedure
Inform the system administrator.
I went thru the forum link: Mass Change of Functional Locations - error message "Objekt PM_MASS..... and read the note 1166820.
Please tel me the steps to do in order to include Object : PM_MASS_TECH_OBJECTS
Object Text: Mass Change of Equipments and Functional locations
in table as per the note...
Please provide some detailed steps..
Authorization is no issue as i have profile: SAP_ALL
Thanks
Murad..

Hi All,
i'm trying to change a filed value as null. i.e. a value is maintained in pp work centre field for functional location. i want to delete this value to keep this field as blank. By using this mass change functionality i'm not able to do so. can any body hep me out to this problem.
Raj

Mass component substitution in Task List

Hi Gurus,
I'have so many Task Lists, and total have hundreds of line operations.
But, now there material substitution. Let say, previously in Taks List using Material/Component "A", and now material "A" substituted become material/compenent "B".
How could we do change (mass change) to all Component in Task List that previously using "A" and than replaced by "B" and how about if there are unit of measure differences .
How do we do it ? Any T-Code to do this ?
Regards,
Tri W

Tri W,
The material will be replaced, with the follow up material, once there isnt sufficient quantity available to satisfy the demand from the reference date entered on the MRP screen.
However, it looks like this replacement of the follow up material only works if you manually enter the orginal material in the components tab or if you import the material from a BOM.This doesnt seem to work if the material is directly associated to the Task list(Even though this is also assigned a BOM number of Type "standard") . When you import the task list into the order, the Original material is not replaced with the Follow up material if there isnt sufficient stock available.This looks like a bug to me, you may want to consider raising a OSS note to see where that leads you, otherwise my apologize for misleading you. We had used the BOM and this worked perfectly for us,hence i was pretty sure this would work for materials assigend directly to task list(Since this also had a BOM number and type assigned to it).
Best Regards
Narasimhan

Creating a query for task list operations

hello all
I checked the forum for similar questions but could not find any.
I am trying to create a task list for the following:
1) specific plant
2) generic task list
3) specific group counter
4) specific operations type (filtered by control keys)
in the display I also include the dependencies of the operations.
I also need to link the task list to a specific class and extract the characteristics value from the class, based on the task list (I think this is better with infoset: if so, in a second stage).
I am using tables
1)PLKO and PLPO joined by PLNTY and PLNNR
2) CUOB, joined to PLPO by KNOBJ and CUKB joined to CUOB by KNNUMfor the dependencies
the results tho, gave me operations that did not exist in the task list so I discovered that there were change masters to the task lists and I added table AENR, outer joined to PLKO by AENNR where I excluded inactive changes.
I still do not get correct results.
I do not get all the active change masters related to a task list, I do not manage to get the task list without changes and also the related operations and dependencies are not correct.
can someone help?

Hi alisa,
Onethng was not yet touched upon in the discussion sofar. If you are not getting all the records those should come, then you need to try LEFT OUTER JOIN between tables by trial. (Trial means LOJ is not accepted on adjacent tables.) I hope you know that the default connection between fields of 2 tables in through INNER JOIN. You need to right click on this line and select LOJ for making it LOJ. This brings you all the records which are being filtered due to IJ (if any).
Try this, if you haven't done already.
KJogeswaraRao

Transaction for replacing material in task lists

Hi
Do anyone now a transaction that can be used for replacing material no. in already created task lists.
Regards
Tom

Hello TOM,
You can change the material in task list by choosing the change task list transaction and these are :
IA02:Change Equipment Task List
IA06:Change General Maintenance Task List
IA12: Change FunctLoc Task List
Thanks
Naveen

Mass Change of Task list of type 2 with CEWB

Dear All,
How to do Mass Change of Master Recipe with Trasaction CEWB, it is only allowing to do mass change in routing not in master recipe.
Thanks
Lisa

Hi lisa
As far as i know it is not possible to use CEWB for Master Recipe
coz there is no option for master recipe selection in working area of CEWB.
regards
Sachin

Solman Change Request Management Issue - about create task list

Dears,
We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
Thanks
Roger

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

General task list with component : creating standard BOM

Hello,
When adding a component to a general task list , i get a "create standard BOM" screen , see below for example :
Standard object PA00000212
Plant
BOM Usage       4
Change Number
Valid From           07.09.2009
Can someone explain to me the relation between standard BOM and component within a general task list ?
Thanks,
P.

Hi,
Pls find some of the points below for your referece
Standard BOM:
Can used for assigning the material from the BOM to Task list operation
That is, BOM components for the object (Equipment, Functional Location , Assembly) can be retrived and assigned to maintenance Task list of the operation
Condition: BOM corresponds exactly to the content of the structure list
Free Material Assignment:
Assigning Stock Material (Material number) those are not listed in the BOM of maintenance object directly to the maintenance task list
Condition: Setting to be done as BOM usage for Plant Maintenance (4)
Path: Maintenance plans, work centers, Tasl Lists and PRTs>>>>>Tasl Lists>>>>>Control Data>>>>Define Presetting for Free Assignment of Material-----BOM Usage as 4
Pls note that, while making free assignment, system creates an internal BOM and this can not be processed from application.
Hope this may useful
Thanks
Siva

PM:Task list Component addition

Hello Guys,
We are facing below issue.
1. In task list component screen, if we add a component via Direct entry, system create Standard BOM.
2. If we add the component via component selection from BOM, it creates the material BOM.
The second method is preferable as changes in BOM is reflected in task list as the link is maintained. This is not an issue if we are creating task list manually as we can select the component manually. But however, if we create task list via LSMW or load program, the issue arises.
When contacted SAP on OSS, SAP advised to use BADI IMRM_COMP_PROCESSING, method SET_COMP_PROCESSING with
E_CORRECTION_ACTIVE = ' '. This seems to resolve the issue. But I am not sure of the side effects.
Has any one implemented this BADI earlier and can share the experience?
Thanks
Ashish Barsagade

hi,
U can assign material BOM in Tasklist header... there is a Assembly field... just enter the name of Material BOM. and Material BOM would be attatched to task list.
it will solve ur problem
Regards,
Amit kushwaha
Edited by: amit kushwaha on Feb 25, 2008 10:45 AM

General task list: component selection from BOM - possible in batch input?

Hi experts,
for the assignment of non-stock material to general task lists I have followed the advice from message[6115684|Re: General Task List Components;.
So what I have done is:
- Include non-stock material in BOM
- Assign BOM to general task list header
When clicking on the "Component selection" button in the task list components, I can select a component.
When entering the material number of the component directly though, I get an error: "Material type X and line item type L not compatible" (CO135).
I would like to upload the general task lists with a batch input recording, but I can't figure out how to select components.
Any thoughts?
Kind regards,
Andreas

Hello,
We have the same requirement to load tasklists (change & create). We are using the function modules EAM_TASKLIST_CREATE and EAM_TASKLIST_CHANGE. However, i cannot get a non-stock BOM item to process. Has anyone got this working?
Thanks,
Clay.
EDIT: Found the answer - simply fill in the fields for BOM on the component (STLTY, STLNR, STLKN, and STLAL).
Message was edited by: Clayton Mergen

LSMW Transaction IA06 - Change general task list

Hi,
I'm using BDC for transaction IA06. But now I've encountered a problem in the maintenace package.
For each GROUP(PLNNR) and COUNTER (PLNAL), there are different number of maintenance package: screen field: RIHSTRAT-MARK01, RIHSTRAT-MARK02, RIHSTRAT-MARK03, etc.
In my source data, the input value is in number which corresponds to the text in each RIHSTRAT-MARK For example, the maintenance package for group PRPMP counter 1 has 1, 2, 3, 4, 8, 12, 16, 26, 52. From my source data, the package is 12, then I will have to check the 6th box.
The problem is, there are different number of packages for each group and counter, and the sequence of package text is dfferent too.
I'm wondering if there is a table that stores the number of package and it's corresponding text for each group and counter?
I've searched the forum, but there seems no discussion about this issue. I'd appreciate any feedbacks from you. Thanks in advance.
Lily

Lily Wu:
Were you able to find a solution to loading the data maintenance package: screen field: RIHSTRAT-MARK01, RIHSTRAT-MARK02, RIHSTRAT-MARK03, etc. ?? Transaction IA06 (Change General Task List: Maintenance Package Overview), Program SAPLCPDI, Screen 3600. I have searched forum too and do not see discussion on this topic also.
I have a similar situation needing to load Maintenance Package indicator data via IA05 thru LSMW. I have an LSMW using the Standard Batch/Direct Input. It is using Object 490 (Gen. task list) Method 0000 and the program Name is IBIP. I am able to import 2 files. 1 for the Task List Header to Structure IBIPTLST. The 2nd file to the Task List Components IBIPTMAT. This process works, but the requirement is to also load the data to update ("check") the screen field: RIHSTRAT-MARK01, RIHSTRAT-MARK02, RIHSTRAT-MARK03, etc. with the proper 'X's for each component.
I have found suggestions to use the IBIPMPAC (Maintenance Packages) structure to load. But this structue is looking for a 2 character field (i.e. KTEXTZYK01, KTEXTZYK02, etc. of type KTEXTZYK). This looks like the data that would be used for Maintenance Strategies Cycle Lengths found in IP11.
Any assistance in loading the Maintenance Package indicators is helpful. Thank you in advance.
Jim

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Mass change of component in Task list

Similar Messages

Maybe you are looking for