Mass for PO

when i m doing Purchase order deletion by MAss t.code than system showing error msg...
Purchasing document has release indicator R (changes not possible)
Message no. 06683
pls tell me how i will do that?
thanks
Rekha

Hello,
1)First, please confirm whether you want to delete or block those 200 POs.
2)Secondly,you try manually deleting/blocking any released PO in either DEV/QAS server & see whether it'll allow you to do the same OR will it throw any error message. If it throws that message in manual deletion/blocking process, it will definitely give the same message in mass maintenance also.
3)Then you have to decide whether the released PO's have to be unreleased first & then go for mass deletion/blocking.
4)Standard t-code remains MEMASSPO itself.
Kindly check the above said first three points & then revert.
Regards
Mahesh

Similar Messages

Problems with new fields added for tc MASS for material master data.

Hello to all.
We created new fields in MARA table and added to the process of the tc MASS. We made the following steps and it almost works correctly:
1-Add new fields to the object ZBUS1001, copy of bus BUS1001.
2-Add new fields to table T130F
3-Add new field to structure E1MARAM.
4-Add new fields to structure CL_MMH1.
5-Add new fields to structure MARA_TMP.
6-Created a function module to control that the new fields not filled in MASS have a "/" value.
If we run the mass for our objetct ZBUS1001 and put a new value or modify the value of new fields, the tc MASS works correctly.If we want to delete a value leaving the value empty,click to the carry out a mass change button and save the change, the system don´t delete the value and keep the first value.
Do you know what the problem is , and what step we didn´t make it.
Thanks in advance.
Edited by: tonnetti pablo on Feb 6, 2008 7:45 PM

Hi,
Check ZTERMDT is checked under Attribute list as below.
Hope it helps..
regards,
Raju

How to create inspection plan in mass for material

Dear Guru,
How to create inpection plan for material in MASS, usually we will create inspection plan in QP01 but in mass for more than one material how to maintaain? Please help
Regards
Karthik.

Hi raja
refer following lonks
QM- LSMW FOR INSPECTION PLAN
Re: CEWB:Inspection Plan upload
bapi for qm inspection plan
Regards
Sujit

Adding custom MARC fields to MASS for updating

We have a requirement to add custom fields to MARC which was done easily. Now we'd like to be able to update these fields via MM17 (MASS) but the fields don't appear. What do we need to do to allow custom fields to be updated via MASS?
Thanks,
-=Rob=-

Dear Customer,
you should check note 576160 for furher information.
You have to implement a BAdI (from mass maintenance) and a Customer Exit (from Material)
mit freundlichen Grüßen/ yours sincerely
Marcus Wagler
SAP AG
Installed Maintenance Support Germany

Removing authorization in mass for users

HI All
Please let me know is there is any option to know what material movement type authorization is given to end users and to remove the movement type authorization for them in mass. please help me in this as the users are provided with movement type like 311 which is effecting my costing.
Regards
Srinivasa Reddy.B

I am a basis consultant and fico consultant I require a way to remove the authorization through mass changes .
regards
Srinivasa reddy.B

Mass For Deletion of Info Record

Dear Experts
Is there any Code for Deletion of the Purchasing Info record By Mass T-code.
Rgds
Pankaj Agarwal

Hi Pankaj,
find below the steps,
1. Flag Info-Records for deletion
2. Run the archiving program - RM06IW30 (Menu path -> Logistics - Materials Management u2013Purchasing - Master Data - Info Record - Follow on Functions - Archive)
Create Archive File: Info Record:
a) Select Action: Archive and enter a new Variant, for example: Z_EINA_ARCH_ 01, press 'Maintain'
b) On selection screen enter the data range (Vendor, Material, etc.) you want to archive.
c) Deselect the 'Test' flag if you don't want to test first.
d) Press green back-arrow and enter the description of this new variantt on the screen which follows.
e) Save the variantt which brings you again to the selection screen. Press green back arrow again.
f) To start archiving process (batch-job), press the 'Start Date' button and select the time when you want to start this process. Select 'Immediate' for instant processing and press the 'Save' button on the bottom of the Start Time' window.
g) Select the 'Spool Parameter' button and save entries. Eventually enter a valid printer to have the result outputted.
h) You are ready now to start the process. Press the 'Start' button and monitor the success with the 'Job Overview' button You can also go the 'fast path' by using transaction SE38, program RM06IW30 to archive info records. For large data archiving, use the background jobs and run those during off-peak times. If you run the program online, you will see a confirmation on the status bar telling 'New Archive file created:.... '
Delete Archived Records: Info Record
a) Follow the menu path: Tools - Administration - Administration - Archiving
b) Select the Object Name MM_EINA for info records
c) Select the menu button 'Delete'
d) Select the menu button: 'Archive Selection'
e) Click the archive created in previous step
f) Select Start Date for process and Spool Parameters for output
g) Submit selection.
h) Check status by pressing the Job Overview button
Hope the above answers your query.
If helpful award points
Regards,
Vivek

Extend the material for the storage location in mass.

Hi,
Can any genius let me know how can I extend the material for the storage location in mass.
Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
Is there any other way apart LSMW for MMSC.
Regards,
Shyamal.

hi
did u tried mass
try this
go to MASS
then select BUS1001
go to plant data for material execute
click on data records to be creatd
then add material in field
then select select field button and add storage for extrenal procurement then there u will find on filed for external proc
now do mass change
reward if helpful
regards
kunal

MASS change in background for thousands of orders t-code MASS

Hello!
We have a list of sales order numbers. (about 100000 orders!)
We need to change 1 field VBAK-KVGR1 in all of them.
Using MASS on forground- takes a lot of time, we can't copy&paste more than 2000 orders (this program can't run the selection screen with more than 2000 orders- we get dump)
How can we use MASS t-code in background?

Hi Janna..I know this question was asked quite some time ago.
What was your experience using MASS in the background as suggested?
We've just received security access to this powerful transaction and while I'm confident I'll be OK using MASS for the customer master update, I'm curious as to whether MASS worked as you thought it would.
Anyone with experience/tips, I would greatly appreciate it.
Thanks
Michele F.

Error "No batch input data for screen SAPMF02D 0130" MASS tcode Msg:00344

Hi,
I am trying to update the filed "Industry"(KNA1-BRSCH) with value "RNRN" in Customer master data (XD01) through Tcode MASS for 1500 customers. I am getting error "No batch input data for screen SAPMF02D 0130" Message no. 00344. I tried to upate one customer but still the same error popped up. We tried implementing SAP note 737698 but it did not work.
Any inputs please??????

Hi,
MASS (KNA1)
Select KNA1-BRSCH
execute
select customers
give your value against New values field
and click on mass change button
Rgds
Murali. N

Mass Change for Vendor CIN (excise) Details.

Dear Masters,
I have an issue to Mass change the Excise data in Vendors master (CIN) details.
The concerned table is (J_1IMOVEND) and the fields are 1) J_1IEXCD 2) J_1IEXRN 3) J_1IEXRG 4) J_1IEXDI
Kindly let me know how can this issue be resolved.
Thankx in Advance.
MANOJ

Hi,
if mentioned tables are not included in MASS for B.Object LFA1, alternatively you can use SAP LSMW functionality for this. The simplest way is to make recording of the simple transaction for changing VENDOR CIN Details.
Hope it helps.
regards,
w.

T Code for doing mass output for Sales order like VL71 for Delivery

Hi
Can anyone let me know what is the t code for the sales orders for which despatch time was set as "3- using own transaction"
Muthu

Hi,
Though there is a program, there is no output for sales order similar to VL71 for delivery. Sales order is the only transaction for which there is no tcode for this purpose.
You can do the following.
Go to SE38 give program name SD70AV1A and execute
Now give ur selection criteria and save this as a variant.
Now you can schedule a job at regular intervals using this variant.
This will enable that if you maintain the output record as 3(using own transaction), the output will be created in mass for multiple sales orders.

Mass Maintenance for Conditions and copying them to other system

Hello folks,
1)I'm wondering wether there's the possility to mass-maintain conditions.
So far I've been doing this manually in ...
MASTER DATA > PRICES AND CONDITIONS > TX "Maintain conditions"
Does anyone have any idea about this?
2)There is report for transporting marketing attributes from, e.g., test- to productive System. Is there anything like this for conditions as well?
Thank you for your ideas!
Greetings from Hamburg!
Hauke Böhmer

Hi Yacoub
Please see if you setup standard t-code MASS for sales prices maintaince in a mass way.

Any BAPI available for mass creation/change/delete for dependency net

Hi guys,
Any BAPI available for mass creation/change/delete for constraints in dependency net. I mean any uploading option in mass for creation, change and delete.
Regds
Regds

Hi,
Check if the below FM's meet your need:
CAMA_CNET_CONSTRAINT_MAINTAIN
CAMA_CONSTRAINT_NET_MAINTAIN
CAMA_DEPENDENCY_MAINTAIN
Regards,
Vivek

Mark as billing completed and Invoiced for mass SO.

Hi,
I want to mark as completed for large volume of SO's status as Delivered and Fully Invoiced.
Is there any way to mark this status as completed for Fully Delivered or Delivery Completed and Invoiced.
Also if there is any error on those SO's how to correct it in mass for the same error which is coming for multiple SO's.
Thanks in Advance,
Regards,
Mohd Ali.

Hello Mohd Ali
You may try program SDVBUK00. This is meant to correct any errors in status. But I guess you want to correct the status and not set the status as Invoiced even though the order has not been invoiced.
Check out these OSS notes and those mentioned within:
1472007 - Document status has to be corrected
207875 - Using report SDVBUK00
Hope this helps.

Using AE(htmldb 2.0) as for reporting tool for other oracle databases.

Maybe I was mistaken, but when I first saw the HTMLDB demo's I saw this as a slick way to build a browser based reporting tool for the masses for quasi-ad-hoc reporting on some of our larger databases that currently have limited reporting capability, and also as a possible replacement for the many MSAccess applets we have.
I just got 2.0 installed and working on a 9i database and went through the basic tutorials, but I can't find much info on how to connect to other oracle databases.
Are my options as follows?:
create dblinks from the local database that houses htmldb to all the other databases?
or
install htmldb schemas on each database I want to access from htmldb?
or
I'll keep looking, but if any of you have any pointers or know of a tutorial that explains the best way to do this it would be greatly appreciated!
tia

As for question 1, yep, that's what I mean. Example:
In a schema in the App Express instance, create a user called "APP1_USER", and then
create view app1_user.people as select * from people@link_user@remotedb
As for the next question, using the built-in insert/update/delete processes will give you
ORA-01461: can bind a LONG value only for insert into a LONG column
among other errors. Apparently version 2.1 will fix this. See Cannot Update VARCHAR column in Remote DB
We address this problem by creating pl/sql APIs for DML, and then writing our own insert/update processes. Slows us down a little, but even with that, App Express remains a productive choice for us.
Another weird problem: auto-row fetch (built-in to HTML DB) doesn't work over db links when you have two columns for a primary key. Many ways around this, e.g. create sequence-populated primary key, create a view with single column that concatenates primary key column values (key1|key2)
Hope this helps!
-John

Mass for PO

Similar Messages

Maybe you are looking for