Mass Maintenence For custome fields from MM17

Hi all,
I Have added some custome fields in to material master and it is working fine,When i am trying to cahnge the values for these custome fields in MM17 it is not getting reflected in material master.
After cahnging the values if i save,it is giving me an Information-1090 : Messages have been issued: number MASS000924000003
In long text of this information i have.
Diagnosis-During inbound processing for the IDoc, messages have arisen while checking material data.
System Response-The system has filed these messages in the form of an application log with the number MASS000924000003.
Can you please let me know,How to solve this.
Thanks & Regards,
Anjana Rao

First read OSS [Note 576160 - MM17: BAdI implementation for append fields|https://service.sap.com/sap/support/notes/576160] and of course (and before) [Note 44410 - Integrating cust.-specific fields in matl master|https://service.sap.com/sap/support/notes/44410]
Regards,
Raymond

Similar Messages

Strategy for Custom Fields

Hi Everyone,
I've a question related to handling of custom fields during upgrade.
Scenario:
9.0 delivered record has a custom field added to it.
After initial pass, following happened.
1. 9.0 delivered record was replaced by 9.2 delivered record structure
2. Custom Field was deleted
3. Data for the custom field was dropped too..
Q1 What should be the best strategy to get the data and field back... Here is what I understand.
Keep 9.2 record
Add custom field to it.
Import data for custom field from another 9.0 environment.
Suggestions welcome.

during initial move don't drop the custom added fields which are needed.
This way you will not lose the data

Steps for extraction of Custom Fields from the SRM 5.0 to the SAP BI system

Hi Experts,
I am new to the SAP BI. I was asked to publish all the custom fields from table (BBP_PDISC) of the SRM system to the BI System.
Please provide some guidiance (or) provide me with step-by-step procedure for doing the same.
There are around 14 fields in this table and i need to move them to the BI system and later inlcude them in reports.
Let me know if this information is sufficient.
Thanks in advance.
SAPBWI

We are working on the Shopping cart DSO

Value Help for a field from custom table in BSP

Please let me know, the procedure to create value help for a field from a custom table in BSP using HTMLB.
Thanks

hi prodigy,
check this code using drop down list.
layout for first page
<htmlb:dropdownListBox id = "ddlist"
 table = "<%=t_mara%>"
 nameOfKeyColumn = "matnr"
 nameOfValueColumn = "matnr"></htmlb:dropdownListBox>
event Oninitialization event of first page
SELECT MATNR UP TO 10 ROWS
INTO TABLE T_MARA
FROM MARA.
 event Oninputprocessing event
**Load the manager class
CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
DATA: V_EVENT TYPE REF TO CL_HTMLB_EVENT.
DATA: DATA TYPE REF TO OBJECT.
DATA: V_DATA TYPE REF TO CL_HTMLB_DROPDOWNLISTBOX.
CALL METHOD CL_HTMLB_MANAGER=>GET_EVENT
EXPORTING
 REQUEST = RUNTIME->SERVER->REQUEST
RECEIVING
 EVENT = V_EVENT
IF V_EVENT->NAME = 'button' AND
 V_EVENT->EVENT_TYPE = 'click'.
DATA ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST =
 RUNTIME->SERVER->REQUEST
 NAME = 'inputField'
 ID = 'matnr'
 V_DATA ?= DATA.
IF V_DATA IS NOT INITIAL.
 V_MATNR = V_DATA->SELECTION.
ENDIF.
NAVIGATION->SET_PARAMETER( NAME = 'v_matnr' VALUE = V_MATNR ).
NAVIGATION->GOTO_PAGE( 'detail.htm' ).
ENDIF.
in the onInitialization event for detail pageSELECT MATNR
 ERSDA
 ERNAM
 LAEDA
 AENAM
 VPSTA
 PSTAT
 LVORM
 MTART
FROM MARA
INTO TABLE T_MARA
WHERE MATNR = V_MATNR.

Need to copy a custom field from sales order to billing document

Hi All,
I have a requirement, I need to add a new field in the sales order header part and even a field in the billing document, once i add this field up in both the documents in the header part i need to create a copy routine using the VOFM tran, can any body help me on what's the procedure to add a field in billing document and does the copy routine transfer the data ( Custom Field ) from Sales Order to the Billing Document, if yes can somebody help me with the procedure on how to and code of it.
solved it myself ....
Regards.
Message was edited by: seshi
seshi

Hello,
Regarding item 1, is it in the region of the global links (ie logout, home, preferences, etc.)? If not, have you tried creating a link via personalizations to the region you wish to have the link displayed (item type = link, destination = fully qualified name of your .xml page/region?
Regarding item 2, you may have to create the custom subtab programatically using the controller for the region of the current subtab layout.
Regarding item 3, you can also add a submit button to the page button bar region via personalizations. You can then add any logic you want to the button in the controller for the page.
Hope this helps.

Icon for customer field (field group)

Hello!
We have a need to follow-up one indicator through a customer field thanks to icon (like severities).
Do you know if it's possible to manage that with the field groups for customer field (I couldn't achieve that yet), or if we have to develop a dedicated webdynpro application for that?
Thanks!
Matthias

Hi
You need to use programs provided by SAP to handle dynamic behaviour.
The idea is to store your BDC data into a file. (If you are already reading
from a file, you still may have to write to a file suitable for the
program).
The SAP standad program can be called using a SUBMIT.
Here are two programs that you can try :
For creation of Customers : RFBIDE00
For creation of Vendors : RFBIKR00.
Regards
Neha

Change Log for Custom fields

Hi All,
I need the change log for custom fields added in BP transaction codes.
Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
Please let us know if iam missing any other thing?

Hi Amit Singh,
Apart from clicking the checkbox in dataelement...
There are some settings need to be done by BASIS
and some settings and entries should be made in SCOD t-code
create entriy for change document here..
also hv a look on below links...
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
Custom Table values in CDPOS and CDHDR
scdo
wat do these fields in scdo stand for?
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Deleting AET custom field from the SAP tableu2019s level.

Hi experts,
I am deleting few un-used custom fields in AET. I am able to see delete symbol as status in AET. Although deleted custom fields are present in lot of structure and tables (eg: CRMD_ORDERADM_H) in SAP GUI tables. I want to delete the custom field from SAP GUI tables and structures.
I tried to delete custom field from the SAP GUI tableu2019s level. But it is not allowing.
Please get me some clue on deleting custom field from the SAP GUI tableu2019s level.
Thanks in advance
Chand

Hi,
The deletion of custom field in AET happens in two steps:
1. You select a custom field that you want to delete, than you press on the delete icon in the Custom Field Assignment Block.
Doing this, you mark the selected custom field to be deleted.
2. You press on "Save and Generate" button. The "Save" will persist the deletion mark of the custom field. It means the custom field is marked to be deleted in the database. The "Generate" will process all the deletion of objects which are needed to delete the custom field, for example: Domain, Data Element, Append, etc.
If the "Generate" does not happen due any reason, the deletion mark is already persisted in DB. It means, later on if you go back to AET, you will see that the custom field is marked to be deleted, but it is not yet deleted.
If you do not press "Save and Generate" button at all, it means, you do not persist the deletion mark in DB. Later on if you go back to AET, you won't see that the custom field marked to be deleted.
Note: Please make sure, "Generation" is only applied for field that is flagged to be generated. The "Generate" flag column is by default hidden. You can use personlization to show the column.
Regards,
Steve

Transfering customer fields from cProjects to PS

Hello,
I am starting with programming and would like to pass some customer fields to PS where I have two areas. On the one hand I have some customer fields in PS and on the other hand there are fields like "account assignment element" and "billing element" which I have to set in PS depending on my customer fields in cProj.
Maybe someone could give me some advice to the following starting questions:
Where can I implement my code for sync the fields from cProj to PS. There are BAdIs for customer fields, events in cProj application objects and one to check/edit fields in cProjects. But which is the right one to use when I want to sync my fields within the save process?
Are there any code examples (except in the help files on help.sap.com and the img-guide) how to modify user defined fields and fields like "account assignement element" where I need to unlock the master data before modifiying them?
Is there somewhere code that should how I can navigate within the cProj-project structure in order to move from project definition , phase and task the tree up and down?
Wow.. what an adventure
Thx in advance,
your Vanessa

Hi,
Regarding field transfer, I answered your previous post.
Regarding the project tree navigation, you can use function module 'BAPI_BUS2172_GET_TREE' (with the project guid as import parameter), and then sort the table Ascending or Descending.

Master Datasource Update for custom fields

I have a standard master data source for 0customer, I need some custom fields that are enhanced in the same SoURCE TABLE KNA1. please let me know if
1. i can create the generic data source Z_DS_CUSTOMER for custom fields only from KNA1
2. Create transformation 1 to Map the data source Z_DS_CUSTOMER to Ocustomer to load the custom fields only and set no transformation for other standard fields
3. Create transformation 2 to Map the data source 0customer_attr to same Ocustomer to load the standard fields.set no transformation for other custom fields
4. Then Load via DTP Standard fields first via transformation 2
5. Then Load via DTP custom fields first via transformation 1
Will the above will work fine, and I can avoid any enhancement to master datasource 0customer_attr
please help me with solution.
Regards
Soniya
null

Hi all my dear friends,
I have seen the recommendation by my SAP collegue and Anil
1. infoobject as Target and
2. in between Standard DSO
1 transformations as you mentioned from 1 IS
3. Common Info source
2 transformations as you mentioned from 2DS
4. Datasources (2no's ) as source to splly to data to DSO
Please tell me what is the need to do all the above why can't I feed directly the Infoobject with the below PLEASE tell me what will be the bad impact on design if I do the below.since my client is asking justification for build of each BI object
1. infoobject as Target and
1 transformations as mentioned from 1 IS
2. Common Info source
2 transformations as mentioned from 2DS
3. Datasources (2no's ) as source to splly to data to DSO
I am not going for enhancement since it is not populating the datasource in rsa3. if you can correct that it would be great.
I have the same code for all custom fields none of them is working no records are pulled in RSA3 For custom field ZZSTAT.
Please help me with this
Thanks
Soniya Kapoor
*data: l_BIW_KNA1_S like BIW_KNA1_S
*case i_datasource.
*WHEN ' 0CUSTOMER_ATTR'.
*loop at C_t_data into l_BIW_KNA1_S
*l_tabix = sy-tabix.
*clear I_KNA1.
*select single * from KNA1 into i_KNA1 where kunnr = l_BIW_KNA1_S-kunnr.
*if sy-subrc = 0.
*l_BIW_KNA1-ZZSTAT = I_KNA1-ZINSTAT.
*modify C_t_data from l_BIW_KNA1 index l_tabix.
*endif.
*endloop.
*endcase.

Negative values for Custom field in SAP coding block !

Hi All,
Hope all of you are doing fine.
I need your valuable suggestion/possible workaround for the following requirement.
u2022 The project requires me to add a custom new field to SAP coding block, which can take negative numeric values.
u2022 The standard u201Caddition of custom fieldu201D configuration allows me to have the data type of the newly added custom field as either NUMC or CHAR. NUMC data type does not allow negative values. Standard configuration does not allow me to choose other data types (for custom field addition) like QUAN which can allow negative values (by checking the Sign at domain level in data type).
u2022 Moreover, once I have added the custom field, itu2019s not possible to change the data type of the newly added field (say from NUMC to QUAN).
I wanted to know if anyone of you have any project experience/knowledge about possible workaround, where we can add a custom field in SAP coding block, which can accept negative numeric values (through standard configuration or otherwise).

No experience on that, but I strongly advise you to not trying to do something else than what was designed by SAP. So, you can create a character type field, with for example a field exit (though this technology is obsolete, it's very useful in that case) to validate its content (and reformat it if needed).
Note that from a functional perspective, I think an amount is strange in the coding block, so maybe ask the functional people to know why they need it...

CNMASS - Ability to apply custom fields from structure CI_PROJ

Hi,
Is there a way to add fields from the Customer Enhancment tab in structures CI_PROJ, CI_PRPS to CNAMSS transaction?
thanks,
Cathy

Hi,
I have the same problem. I want to change a customer field (from structure CI_PROJ) via trx CNMASS. But the fields of structure CI_PROJ are not provided.
Is there a standard possibility to extend the table CNMASS_PROJECT_DEFINITION with the structure CI_PROJ? I donu2019t want to modify the SAP table CNMASS_PROJECT_DEFINITION.
Of course I know that I can write a program ore use trx LSMW but I'm looking for a more suitable and comfortable solution.
@Cathy: did you find a solution in standard?
Thanks in advance for any hint!

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
 'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
 'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
 'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
 'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as T528B
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

Mass Maintenence For custome fields from MM17

Similar Messages

Maybe you are looking for