Mass transaction for maintaining cost collector

Hi experts,
Is there any mass transaction for maintaining Cost Collector.
Regards,
( Rajneesh Gulati )

HI,
You can maintain Product Cost Collector in mass maintanance in following transaction :
KKF6M Create Multiple Product Cost Collectors for Production Versions
Enter Plant, No of materials you want to create Product cost collectors enter in multiple selection , enter order type as RM01 which is default for REM and then execute so system will create Product Cost Collectors for all production versions.
Follow above procedure & revert in case any doubt.
Regards,
Tejas

Similar Messages

  • CO88 - Collective Settlement Processing for Product cost collectors

    Hello Gurus,
    I have couple of Settlement related problems. Please advice if you have any solution to fix these problems.
    1.We are using CO88 - Collective Settlement Processing for Product cost collectors but some of the cost collectors are not settling fully. Where as the same cost collector settled individually without any problem.
    2. Some cost collectors are settled but very small amounts are still there as un-settled.
    Thanks in advance.
    Vishwanath.

    Hi
    Welcome to SDN! We hope your 1st experience here is good
    Issue 1: It depends on the error that you got at the time of settlement... Many times, when a PCC is being posted to from Production while you are trying to settle, it can give you error...
    later on it can be settled w/o any issues
    Issue 2: Ideally there does not remain any amount after settlement.. May be the amount which you are seeing pertains to the next month.. You can shift to periodic view using CtrlShiftF11 and see if any balance really exists
    BR,Ajay M

  • Target costs for product cost collector

    hi,
    can anyone tell me when are the target costs updated for product cost collector. it is after we post actual costs or after we calculate variance.
    Thanks

    Hi Elaine,
    Thankyou very much for the Information. In our case when we create new product cost collector and cost it and post actual costs to it, system is showing target costs on the product cost collector even before variance calculation but for product cost collectors which are existing from long time system is not showing target costs after we post actual costs. we have created new cost component structure recently and its active from april 1. does this have any impact on the target costs. Please let me know if you have any idea on this.
    Thanks,

  • Period-end closing process for product cost collectors

    Hi Friends
    Please explain me step s involved in period-end closing process for product cost collectors.
    Regards
    Sandeep

    Dear Mr.Sandeep,
    Using CO88 - variance will be settled.
    Please go through this link.
    <u>http://help.sap.com/saphelp_470/helpdata/en/5f/1faba54aee11d189740000e8322d00/frameset.htm</u>
    If useful reward points and close this thread.
    Regards
    Mangal

  • Period end closing step for product cost collector

    Hi All,
    I have never worked in repetitive manufacturing environment before. My client is implementing repetitive manufacturing with backflush. Could someone clarify me the following.
    I have understood from the documents that we need to do the following:
    1. cost center allocations
    2. Calculate the actual activity price (KSII)
    3. Revaluate all the cost collectors with the actual activity prices
    4. Overhead calculation
    5. Variance calculation
    6. Settlement of cost collectors
    Could someone tell me, does all the above period end steps are followed in the industries? Otherwise, could you write what is actually followed.
    Thanks
    Susan

    The steps are correct. In case you are using reporting point backflash, then you need to execute WIP calculation as well. For this you need to include following activities before variance calculation.
    1. change WIP cut off period (KKA0)
    2. Execute WIP calculation - Collective (KKA0)
    Regards
    Rakesh Pawaskar

  • Mass transaction to maintain purchase info recds.

    Hi SAP gurus,
    pls suggest how to maintain  purchase info recds.in mass
    we are maintaining it in ME11 but it is one time process

    Ply clearify me
    these "MEMASSIN" Will work if inforecord is created.
    Ply use LSMW tool for creating or by SHDB record the inforecord and tell your abaper to make "Z" program
    regards
    amey

  • MASS transaction for MD09 in SAp4.6c version

    Hello Gurus,
    Is there a mass transaction to get the pegged requiremsnt if the only input that you have is order type and Planned order number in REM scenario
    We have t code MD09 for single planned orders , is there any report for MASS
    THNX
    HKR

    Hi Madhu,
    THNX for info.
    But MF57 is not provifing the desired info
    Edited by: HEMANTH KRISHNA RAI on Nov 16, 2011 9:23 PM

  • Mass Transaction for Recipe/Routing

    Hi
    Is there any transaction for Mass copy of Recipes/Routing from one plant to Other. Instead it is extension of same recipe/routing to other plant.
    thanks
    Vijay

    Dear
    We dont have any standard tcode in sap  pp to copy routing in mass.
    but if extension is same then u should use BDC or LSMW.
    it will hwlp u.
    Thanks and Regards

  • MM-Pricing Condition - Mass Change for Complementary Cost Condition

    Dear Gurus,
    I am using pricing conditions as "complementary costs" category, in the Purchase Order.
    We have to fill in the supplier whenever we use this kind of pricing condition.
    Do you know any way of how I can do it in mass, instead of doing one by one?
    Any sugestion?
    Thanks,
    Maria

    Hi Maria,
    In your condition type for the complementary condition, have you assigned an access sequence.
    You can check this in tcode M/06
    If so, you can maintain the relevant condition records in tcode MEK1. While maintaing the condition record, you can also specify a default vendor in the details sub-screen of MEK1.
    Doing this will automatically populate the vendor code for this complementary condition.
    Please try the same and give feedback.
    Regards
    Prabhu

  • Business Content for Product Cost Collector analysis - KKBC_PKO

    Hello,
    I have a user requirement to setup a report that matches the KKBC_PKO report in ECC.
    Is there any business content that can help me do that?
    Many thanks,
    Claudio

    Hi,
    I guess you shoud check out one of the 0CO_PC_* datasources. Check also the business content for applicaten controlling->product cost controlling. [BCT|http://help.sap.com/saphelp_nw70/helpdata/en/37/dc143c65b8b800e10000000a114084/frameset.htm]
    Siggi
    Edited by: Siegfried Szameitat on Jul 14, 2010 2:47 PM

  • MASS transaction for scheduling we need tables & fields

    Hi,
    We have used transaction SM30 and added BUS2013 as used table MASSFUNC with BAPI MASS_CHANGE_SCHED_AGREEMENT
    MASSTAB (table) and MASSFLDLST (for field selected). for the scheduling agreement of Tables and Fields please give us this data.
    Thanks
    Shital

    Hi dear,
    MEMASSSA
    Try this Tcode
    TABLES: massfunc, massname.
    TABLES: masstabs, massfview.

  • Is there a mass transaction for deleting processing locks

    Using trx FPLKDEL will not help, because the locks were not set using FKLOCK2.

    Hi,
    You can also try FPE2M for deleting processing locks at item document level. The limitaion of this code is that the documents should have the same " Due by date".
    You can also do some config if you need specific screnn layout as well.
    Let me know if this helps.
    Regards,
    Lalitha

  • Profit center change in product cost collector

    Hi All,
    I would like to know what precautions we should take for mass changes of profit center corrections in the "Product Cost Collector".
    I want to make  same profit centers in material master and in product cost collector for that we need some  report on "Product Cost Collector" or table name so that we may compare the profit center in material master and Product cost collector in order to make them in sink.
    Regads,
    Raj

    Hi All,
    My query is from which T-code of product cost collector or any table by i get matrial and profit center combination.
    Also i would like to know any precaution if any change of profit center in material master for product cost collector (privious is X cost center and now i am changing to say Y).
    Regds,
    Raj
    Edited by: RBS123 on Jul 15, 2009 8:24 AM

  • Costing Variant & Prod Cost Collector

    I am in the scenario of period costing with a product collector.  Please guide me on the following:
    While configuring for costing/valuation variant, I find that we create a costing / valuation variant under 'Material cost estimate with Qty structure' and also under Cost object controlling - Product Cost Collector, 'Check costing variant for Product Cost Collector' & 'Check valuation variant for Product Cost collector'.
    Do need to configure a costing variant and valuation variant under these paths, viz. under Standard Cost estimate with Qty Structure & also Product Cost collector ?
    Please give your comments ASAP

    closed

  • Cost collectors

    Hi Experts,
    Is there a way to manually do an entry to zero out a cost object and post it to the Product cost collector?  In one of the clients plant, the cost object distributes the labor base on production receipts to stock. So if nothing was  completed to stock during the month the cost are not distributed.  But now they think there will be no production receipts so they want to distribute the all the labor on the cost object to the product cost collector manually
    Thank you,
    Nivi

    hi
    for product cost collector
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/fe/cb8d384b858370e10000009b38f839/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/ff/d08d384b858370e10000009b38f839/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/1c/cd8d384b858370e10000009b38f839/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/08/77ba810a1611d3a6b900104b55d538/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/08/77ba840a1611d3a6b900104b55d538/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/90/ba66d9446711d189420000e829fbbd/frameset.htm
    nagesh

Maybe you are looking for

  • Replicating vendors from SRM to ECC

    Hi All, We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario. We have a requirement where we want to replicate the vendors from SRM to ECC. I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but

  • Related to collaboration rooms

    HI All Can anyone tell me the main purpose of creating collaboration rooms in portal ? What are the things we can do by creating collaboration rooms in portal ? thanks in advance

  • JTextArea within a JScrollPane

    Hi! I've searched through the Project Swing archive and found lots of questions regarding how you ensure that when text is entered into a JTextArea control (via the append() method) the JScrollPane automatically scrolls to the position where the text

  • Calender

    hi, I've a radio button on my screen and i need that if user select that radio button - he should be provieded with a calender that is the calender needs to be poped up on the screen so that user can select two dates. based on the dates selected i ne

  • Chapter needs to link to web or e-mail

    hello checked around but cannot figure out how to make chapter 2 (3,4,5etc) link to a web page or e-mail. I have entered it in inspector but when I simulate(which is set for web@ access) nothing happens....I want to click on the screen and have a web