Master Data Ad-hoc Query

when we try to save changes to existing queries, we get a message stating that changes to the repository cannot be made. A few months ago I copied the infoset /SAPQUERY/HR_ADM so that I could remove fields not being used, etc. Ever since then, I cannot save changes to existing queries in either infoset. If anyone knows of something I may have changed by mistake to cause this, please let me know.
Thanks,
Karen

Hello,
query /SAPQUERY/HR_ADM belongs to the client independant (global area) more info you can find here: http://help.sap.com/saphelp_erp2005vp/helpdata/en/d2/cb3f6f455611d189710000e8322d00/content.htm
I think your copy of the infoset will also belong to the global area.
Koen

Similar Messages

Extract CRM Master Data - Ad Hoc Query

Hi,
Does anyone know of a tool in CRM like Ad Hoc Query in HR?
Basically I'm looking for an end user tool that allows the user to pull of Master Data. Effectively like a report but they can pick and choose the data they want it to search on.
Any help with this would be greatly appreciated.
Points awarded for helpful responses.
Regards,
Philip Johannesen

Hello,
query /SAPQUERY/HR_ADM belongs to the client independant (global area) more info you can find here: http://help.sap.com/saphelp_erp2005vp/helpdata/en/d2/cb3f6f455611d189710000e8322d00/content.htm
I think your copy of the infoset will also belong to the global area.
Koen

Master data values in Query

Hello,
i want to restrict division by certain value in a query. i cannot see one of such values in the restriction window in the available list of values.
i checked master records for division and it has this value. the infoprovider may not have this value.
in the 0division infoobject the settings in the business explorer tab are:
Query Def. Filter Value Selection: M Values in master data table.
Query Execution Filter Val. Selectn:M Values in master data table.
Why can't i see the value in the query for restriction?
thanks

Hi Aby,
Have you tried clicking on the "display other values" button right before the find text box in the restriction window (the one with the small yellow arrow)? If not, then click on tht button and put in some restriction rule to cut down on the number of entries displayed. This should display the value you desire.
In addtion to that uncheck 'only values from InfoProvider'
regards

Force read/refresh of master data attributes on query

Hi there,
We're having troubles with one input ready query that changes and attribute value (KYF) of one characteristic. That works fines and whe can save changed data on the infoprovider via DTP. Problem is when data is saved we need to refresh query as whe have both values on screen (original value as char attribute on rows) new value as input ready KYF, so after save we would like to see that both values are the same.
Is there any way of force query no to read from caché as whe are changing master data attributes. I read something about IF_RSMD_RS_ACCESS class that can be implemented on Master Data access and force it there but sounds really hard so if this is the way can some of you guys give us some help.
I hope I make myself clear on the explanation...
Thanks in advance,
Regards
Carlos

Dear All,
The recent days that I tried working on changing master data attributes through BPS didn't work out.The Primary reasons was that some of the attributes that I needed to change were not present in the transaction or planning cubes and the characteristics that are not part of your cube on which the planning area is based then you can not do changes on them.
This is my undestanding .Please correct me if I am wrong.
Besides , I was also thinking if we can do the same through portal.i.e retriving the master data infoobject ( based on the value seleceted for that infoobject by the user ) and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say 01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40 and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
Is this possible through portal and BW?
Any idea on this would be appriciated.
Regards,
Ankit
Edited by: Ankit Bhandari on Nov 21, 2008 12:21 PM
Edited by: Ankit Bhandari on Nov 21, 2008 12:32 PM

Japense language getting displayed in master data not in query

Hi all,
I am trying to load the asset master from ecc and bw which both are unicode. But then the master data gets loaded perfectly with japanese in the master with
   asset   language   description
1. 300001   en           加硫
2. 300002   ja           加硫
i can see some data is loaded with en and some with ja both are loaded in master data perfectly.
but then in the query if i want to display 30002 it is not getting displayed
can anyone help me on this

Hi,
What language you are selecting while logging into the query designer?
Select the language as JA and then check if you can get the required result.
Regards,
Durgesh.

Characteristic "Master Data" setting in Query definition not working?

Hi,
I am having a problem with a query definition. (BI 7.0)
The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
Filter
Project Definition = Fixed Single Project Definition
Fiscal Year Variant = K4
Project Profit Centre = Hierarchy Node
Project Plant = Fixed Single Value
Free Chars
Network
Network Activity
Activity Element
Rows
Project Plant
Project Profit Centre (With hierarchy)
Project Definition
Milestone Type (Setting in characteristic to pick up Master Data)
CSR Relevant    (Setting in characteristic to pick up Master Data)
      Structure
           Actual
           Scheduled
    (Actual: Value type = Actual, Origin = Manual ,Event = Start)
    (Scheduled: Value type = Actual, Origin = Scheduled ,Event = Start)
Columns
Key Figure structure of 12 key figures in a time series
Selection
Key Figure = Date
Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
FYI
When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
Thanks in advance..
Stevo

Hello there,
Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
It is stucked while executing the query isn't it so?
That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
If it is being stucked in query execution whike milestone is in the rows. Try this for example:
Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
Diogo.

Incorrect result between maintain master data and bex query, how can i fix?

Hi ALL,
i get some messages from the users there is incorrect result between SAP R/3 and Report on BW. i controlled the monitor and i saw there was a job for 0CUSTOMER_ATTRIBUTE that it finish correctly but the processing it was only in PSA, i started the full update immediately from PSA into Data Targets and is finished correctly. after when i control the content of the 0CUSTOMER (right click maintain master data) i get the correct attribute result that match the data in SAP R/3, but the problem is when i execute a query Bex on this master data it will not return the same attributes data.
Can SomeBody Help please
Bilal

hi,
For any master data attributes loaded you will have to run "Attributes Change Run" for that.Execute for Master data 0CUSTOMER.
The same is avilable in rsa1->Tools(top menu)->apply hierarchy/attribute run.
hope it helps,
regards,
Parth.

Load Master Data InfoObject using Query as Datasource

I there a way to use a BW Query as a Datasource to load a Master Data InfoObject. I have a query that calculates DSO for a customer and would like to update a custom DSO attribute in 0Customer

As Bhanu mentions, Analysis Process Designer would be an option. I did not use it before 3.5, but I know it did not have all the capabilities it has with 3.5.
I don't think there is any need for transactional ODSs in the process however. You can specify your query as the DataSource, specify any filtering / transformations needed, and then specify the InfoObject that is the data target. I haven't used a query to create Master Data with it but I do use it to take Master Data as input, manipulate it, and then update that Master Data.
The APD is covered in BW380 along with Data Mining - which is a good class if anyone is interested.
Is it easy enough for someone to pickup without training on it? I don't know - I think it would be for someone that has experience with the BW Admin Wkbench and has time to experiment. I think the related Data Mining features would require training.
APD has a lot of powerful capabilities that could be used to solve a variety of challenges not readily solved with the Admin Wkbench tools. I'm not sure why SAP hasn't done more to promote it.

Item Maste Data - L/U Query

Good Afternoon
Experts:
I have been assigned a task to pop-up a L/U query on the BINS column of the matrix on the Inventory tab of the ItemMasterData screen. So, I need to use the
Item value from the ItemNumber field at the top of the screen.
Here is my query so far which I have been unable to get to work. Note, the ITEMBIN table is a non-SAP table that was created here:
Select T0.U_WhseCode AS 'Warehouse', T0.U_ItemCode AS 'Item Code', T0.U_BinLoc AS 'Bin Location', T0.U_Quantity AS 'Qty in Bin' FROM [@ITEMBIN] T0 where t0.U_ItemCode = '$[OITM.ITEMCODE]'
So, essentially this L/U needs to be on a different field, in this case the BINS column in the matrix, then the ItemNumber field.
1) I understand this is possible by referencing the table/field behind the ItemNumber field on the screen.
2) I get an Internal Error(8180) when I try to execute the L/U via Shift/F2 after
assigning it to the BINS column.
Can anyone see what may be wrong with the query? Perhaps my understanding
of how to get this type of functinality is not correct.
Thanks,
Ed

Experts:
I made one more pass through the forum for assitance with my question. I did find
a simple suggestion to delete re-add the query. I did that and no more Internal 8180 error.
Thanks,
Ed

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Can we generate a report on master data alone without Info cube?

Could some one let me know whether
Can we generate a report on master data alone in BEx without Info cube?
Thanks in advance.

yes you can generate a report .
use the master data infoobject and insert that infoobject as a infoprovider and design a query using this infoprovider and view your query on this master data in Bex Query...
cheers
Sunil

Keyfigure is attribute of Master data and need to add at cube level

Hi,
We have requirment that need to make report out of Cube and in the report all the fields are comming out of the cube .But one key figure which is not in the cube and need to be there in the report.It is the attribute of sales org.
Sales org is existing in our cube .
Please currect me if i am wrong.i am planning to add the new key figure in the cube and will populate the data using upgdate rules.
Thing is we have upgraded system into Technical BI7.0 from BW 3.x now.If i am going to add the keyfigure in the cube then i have to move the existing data into dummy cube and enhance the existing cube with new keyfigure and write update rules.Do i go for Transformation or Update rules.
The exsiting cube has Transfer rules and infosource and update rules
Please some one can advise me in this

Hi,
i dont think there is need for including the kf in cube and doing the update rules routine stuff.
you can directly use the KF from the attribute of the master data in the query.
PLease go thru the following link. This is applicable with 7.0 also
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
Regds,
Shashank

Access data on multi-logical database with ad hoc query

Dear all,
I would like to know if it is possible to access data in multi-logical database with ad hoc query.
I recall that I read some document stated that you can access data in multi-logical database with PNP as base.
But I find no document about how to set it up, any comment?
Regards
Bill

Hi Bill...
PNP can be accessible..............
PNP 0000-0999, 2000 to 2999 HR Master Data & Time
PCH.... I don't think so....
Experts please do reply on this please...................
Vijay
Edited by: Vijay Shankar on Sep 13, 2011 11:32 AM

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Time-dependent master data in the cube and query

Hello,
I have a time-dep. masterdata infoobject with two time-dep attributes (one of them is KF). If i add this infoobject into the cube, what time period SID will be considered during the load? I assume it only matters during load, if i add the KF to the query it gets its value based on the SID in the cube.. right?
Thanks,
vamsi.

If its Time Dependent Master Data object when you run your Master Data if that time any changes to the Master Data that value will be overwrite to the old value you will get the new value. When you run the Query execution the Infocube Master Data infoobject will having the SID that time it will to there it will be displayed at that moved what is the value you have in the Master Data table.
This is what my experience.
Thanks,
Rajendra.A

Master Data Ad-hoc Query

Similar Messages

Maybe you are looking for