Master data attribute getting blank value

Hello experts,
we have YTERMID infoobject having 0DEPPLANT, 0PLANT as display attributes and 0TRAPPOINT as navigational attribute. We do FULL upload till PSA from flatfile datasource which has two fields TERMID and PLANT. From PSA its DELTA load using DTP. Transformation logic applied: TERMID one to one mapping with YTERMID and PLANT one to one mapping with 0DEPPLANT, 0PLANT and 0TRAPPOINT.
We have a process chain for this that has Execute Infopackage step, Execute DTP step and Delete PSA request step.
When we trigger the process chain, it completes successfully, but 0TRAPPOINT field is blank. i.e. TERMID gets mapped to YTERMID, Plant gets mapped to 0DEPPLANT and 0PLANT, but not mapped to 0TRAPPOINT.
I don't understand why this field is blank eventhough transformation logic is applied.
Please suggest what could be the reason for this behaviour?
Thanks in advance,
sundar

Hi,
If u have already loaded master data then u r loading once again after adding the attributes then it will be blank.
1st check in R/3 side if the datasorce is populated by extractor. Then check the mapping in BW stsem if it is correct.
Then delete all the master data and load it once again.
Thanks,
Debasish

Similar Messages

Datasource for master data attributes : QUAN fields ?

Hi,
In the datasources for master data attributes (in R3), fields type QUAN are in the extraction structure but not in the datasource (for example field LFMNG is in extraction structure BIW_MVKE_S but is not in the datasource 0MAT_SALES_ATTR).
Is there a standard way to have these fields type QUAN in master data attributes ?
Otherwise I think to this solution :
=> add a field ZZLFMNG type DEC (DEC fields are in the datasource for master data attributes) in a structure append of BIW_MVKE_S
=> in the user-exit for master data attributes : move the value of LFMNG to ZZLFMNG
=> in the infosource in BW : assign an infoobject type QUAN to the field ZZLFMNG
What do you think of it ?
Thanks in advance.

Hello,
I'm adding this field LFMNG too, but after I update the roosfield table an error occurs in RSA6.
This error said that the MEINS field is hide in the DataSource. But we there isn't this field there. Someone knows what should I do?
Thanks!
Eduardo

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

No Master Data Attributes Value Loaded

Hi
   I have a custom Master Data Info Object which gets it feed for a simple master data attribute data source.
    However none of the Master Data Attributes actually are populated though my request load is successful.
    I get 144913 records transferred but only 78596 added. Despite this I have not a single attributes value populated.
    Could the reason the data is dropping because I have 3 key fields in my datasource VIEW but only 1 Key defined in the Update Rule ? If yes, how can I change the Update Rule to include more Key Fields ?

Hi Chris
I request you to check the transforamtion between your data source and data target once again.
When loading to data target, according to your transformation only the records will be updated to your data target. But all the records will get populated.
Yes, Key fields are also one reason, if the duplicate rows being populated.
Compare your data target data & RSA3 Extractor checker.Whether the duplicate records being added together or not
Regards
Saravanan.ar

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Extraction through master data attribute not working

Hi All,
In my ODS, i have a field Sales Document Item, with attributes ship-to-party, sold-to-party, etc.
Now, ship-to-party and sold-to-party are extracted using the update method master data attribute of Sales Document Item.
For some of the Items, the ship-to-party and sold-to-party are getting extracted properly, but for others, they are returned as blank; even though these records are present in the master data for Sales Document Item.
Kindly provide your inputs for this issue...

Hi Apeksha,
Check your transformations.for those "ship-to-party and sold-to-party "
Thanks,
Vijay.

Displaying master data attribute of selected variable

Hi friends ,
I have a requirement to display the master data attribute of the material number selected by the user from the drop down help . We are using Web Layouts for user interface.
For solving this i have developed a BSP application which calls the FM - ZVARIABLE_GET_DETAILS ( given by SAP in the HOW to for variables of type exit ) and gets the value for the variable of Material number. For this value I run a select on master data tables and display the attributes on the BSP page.
It work fine when the user opens his web layout for the first time . However when the user changes the Material no fromt he dropdown my BSP still displays the old material numbers attributes . In debugging I found that the FM -ZVARIABLE_GET_DETAILS is still giving the old value of the variable.
Please let me know how can i get the correct runtime value assigned to the variable ? It seems the FM ZVARIABLE_GET_DETAILS gives the value which was saved last by the user.
thanks in advance

Hi BSPIAN,
you may have missed a hint in the How-to paper.
The value of the variable l_buffer_call (TYPE boole-boole) should be switched from 'X' to ' ' in order to avoid buffering the values. Then your FM will be called each time the value of Material changes.
Hope it workes!
Regards
Steve

Error while loading master data attribute

Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
Karan

Hi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

Can't assign an infoobject using master data attribute of

I've added in 0purch_group to my cube and I want to assign it using the master data attribute selection but it doesn't bring back anything to choose from. the attribute is 0mat_plant_purch_group and I've made it navigational. any ideas?

So do you say that you dont have mat_plant included in ur cube.
Then what are trying to get into the field with out a source field. How do you want to fill the value if you dont have mat_plant - i mean which of 100 values of matplant and attribute values should be populated.

Master Data Attributes issue in BEx

Hi Everyone,
I have loaded Master Data Attributes and Texts for 0customer. 0Customer has one Display attribute. I add this into the Bex Query Designer.But the data for the display Attribute(SORT1) is not displayed in the Analyzer. I have maintained everything correctly. The Baclkend BI system has Data for the display attribute.
Do we require to do any additional settings in Query Designer for the dat ato be shown when we drag the display attribute into Query Designer Panel. I have maintained the Display settings correctly in Query Designer
Please Advise.
Regards,
Samir

Hi,
are you able to See no data in Field of Attribute(SORT1) or are you not able to see field Attribute(SORT1) in report?
if you are not able to see field Attribute(SORT1) in report, right click on 0Customer, select property and go to attribute tab. select Attribute(SORT1) from left to right. click ok. you will get field Attribute(SORT1) in report.
you are not able to See no data in Field of Attribute(SORT1). activate master data after maintaning master data and chech value is availble in attribute (SORT1)

Force read/refresh of master data attributes on query

Hi there,
We're having troubles with one input ready query that changes and attribute value (KYF) of one characteristic. That works fines and whe can save changed data on the infoprovider via DTP. Problem is when data is saved we need to refresh query as whe have both values on screen (original value as char attribute on rows) new value as input ready KYF, so after save we would like to see that both values are the same.
Is there any way of force query no to read from caché as whe are changing master data attributes. I read something about IF_RSMD_RS_ACCESS class that can be implemented on Master Data access and force it there but sounds really hard so if this is the way can some of you guys give us some help.
I hope I make myself clear on the explanation...
Thanks in advance,
Regards
Carlos

Dear All,
The recent days that I tried working on changing master data attributes through BPS didn't work out.The Primary reasons was that some of the attributes that I needed to change were not present in the transaction or planning cubes and the characteristics that are not part of your cube on which the planning area is based then you can not do changes on them.
This is my undestanding .Please correct me if I am wrong.
Besides , I was also thinking if we can do the same through portal.i.e retriving the master data infoobject ( based on the value seleceted for that infoobject by the user ) and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say 01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40 and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
Is this possible through portal and BW?
Any idea on this would be appriciated.
Regards,
Ankit
Edited by: Ankit Bhandari on Nov 21, 2008 12:21 PM
Edited by: Ankit Bhandari on Nov 21, 2008 12:32 PM

Webi error for master data attributes if universe is on top of BI query

Hi All,
We are using BO XI R2 SP5 integrated with SAP BI 7.0.
We have built a universe on top of a BI query and when we try to build a web intelligence report that includes master data attributes like Customer City,Customer Region etc BO throws the following error:
Error 1:
Database error: [SOFA Driver] : Error getting members for hierarchy (level=ZFI_I03/ZFI_I03_Q0003, member=[ZFI_I03___F172], opcode=[ZFI_I03___F172]) . System error in program CL_RSDM_READ_MASTER_DATA and form VALUEREAD-02- (see long text). Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
For a universe built on a different BI query with master data attributes mentioned above,a different error occuring.
Error 2:
Your Web Intelligence session has timed out. Log out and log in again to InfoView. (Error: WIJ 77778)
We have tried:
1) We have executed the function module BAPI_MDPROVIDER_GET_DIMENSIONS with necessary inputs query/cube and we got correct output, like members, optional properties, selected properties and restrictions.But, still our problem remains same.
2) Transaction u201CRSRTu201D and executed the query,transaction RSRV to check SID-tables and the related masterdata.
Above steps we performed in response to SAP tickets 541052 / 2009,541131 / 2009 based on logs generated,but still the error persists.
What is working:
If a universe is built on top af an infocube directly, then there is no problem with master data attributes in webi report.
Please let us know if you need more details to help us resolve this issue.

Hi Naresh,
based on the MDX you can identify that those are navigational attributes and thats why the issue is not happening when talking to the cube directly because when you connect to the cube directly the navigational attributes are not available.
Take a look at note : 996197
not sure if it will solve the problem because there are other notes when you search for the error message but this was most of the times the one that resolved the issue.
the issue is in the BAPI functions
Ingo

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Error in Master data attribute

Hi Gurus,
I Have got the following error while iam loading master data attribute
Data record 5238 & with the key '000000000030022055 &' is invalid i
value '4902430016629 &' of the attribute/characteristic 0EANUPC &.
Regards

Hi,
Please perform the data load with the option via PSA (in infopackage). Right click on data source- > manage. Click on the request and edit the record in error.
Hope this help. Let me know if you further queries.
Viren

Master data attribute getting blank value

Similar Messages

Maybe you are looking for